Does not support this resolution under the current settings, cannot start the Cyber link YouCam Cyberlink YouCam error

Similar Questions

• CyberLink YouCam does not support this resolution under your current settings

  Original title: CyberLink YouCam is a piece of JUNK! Someone help!

  I tried to ask this question and an answer, I had not helped. The first thing that happened was: I am trying to run YouCam on one of my friends computer. It worked before, I have no idea what they were doing to what I wasn't here. The error is said when I try to open it is "Cyberlink YouCam does not support this resolution under your current settings." I tried to change the resolution in the option customize when I right-click. There are currently on the highest resolution. I tried to lower the resolution a bit, but the same error message appears. When I troubleshoot the program, it doesn't tell me how to solve this problem. When I run the troubleshooting and I click on 'Try recommended settings', it is said that the sound running Windows XP service pack 2, but the sticker on the computer Windows 7. Its a HP computer. When I run the diagnostic tests in troubleshooting, error, said YouCam program isn't an option to select. I tried updates installed in the program and that did not work. I tried to uninstall and reinstall the program, and that didn't work. I have re-uploaded CyberLink YouCam 3.5 on the site and it does not work. The new error that appears is "Cyberlink Youcam do not support a screen resolution less than 640 x 490 with 96 DPI". The resolution of the screen is 1366 x 678 (recommended setting). In addition, when I put the program in safe mode, the program will start, BUT an error pops up saying that it can not locate the device. What the * happens, have worked on this for 2 weeks and nothing works.

  Clues of these similar positions.  Some of them speak to get a fix for the problem of the website of the manufacturer.

  YouCam on netbooks
  http://Forum.CyberLink.com/forum/posts/list/8118.page;JSESSIONID=601994404BA3648254AEDC27EA7EC315

  CyberLink YouCam
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/CyberLink-YouCam/TD-p/253590

  http://www.Google.com.au/search?q=YouCam+resolution+problem&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = jn5nT-yqE_D1mAWkmdmnDQ

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

  Hello!

  I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

  So, what should I do?

  Thank you very much.

  Luiz Borges

  Upgrade the BIOS/downgrade will not fix it unfortunately.

• What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  Hello

  1 how long have you been faced with this problem?

  2 have you made changes on the computer before this problem?

  3. when exactly you get this error message?

  The following threads may be useful:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-from-webpage-not-implemented/d09fa331-92c6-4CD3-bc89-9a2c03e304fe

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn

• When I connect to the Internet, I get a message error "object does not support this property or method". Unable to do anything from there.

  original title: error messages
  As soon as I get on Explorer and on internet I get an error message "object does not support this property or method' am unable to navigate due to this message to appear on each movement.  Someone help?  Thank you

  Hello

  (1) do you have made no changes before this problem?
  (2) is this problem limited only with a particular website or any websites?

  (3) when exactly, you receive an error message when you use Internet Explorer or when the Internet connection?
   
   
  Method 1: If you receive script errors, you can read the following article and check if that helps.
   How to fix script errors in Internet Explorer on Windows computers?
  http://support.Microsoft.com/kb/308260

  Method 2: You can also read the following article and check if it helps.

  Can't access some Web sites in Internet Explorer
  http://support.Microsoft.com/kb/967897

  Warning: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet files, cookies.

  Method 3: Networking in Mode safe
  Follow the link below and check if the problem persists in safe mode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Hope this information helps.

• How to get rid of "Web Page Message" indicating the object does not support this property or method.

  After I log on my computer, I get the following pop up message "Message on the Web Page" - "object does not support this property or method." He continues to pop everytime I try to do something

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Error: The system does not meet the installation requirements. the software does not support this versio

  1 LASERJET PRO CP1525nw

  2. Windows XP

  3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.

  4. no change

  Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.

• I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera.  I have a Nikon 5100 digital SLR.  He has always

  I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera.  I have a Nikon 5100 digital SLR.  He has always displayed them in the past.  How do I get to view these photos in Bridge, then open them in RAW?

  Your Nikon 5100 requires a minimum of 6.4 ACR.

  The ACR, which is installed with CS5 default is 6.0.

  You must update your ACR to the latest version available for CS5 - ACR 6.7

• I downloaded the Wizard twice.  I also downloaded the latest adobe player, and he says it does not support this file

  How to open items 12 now that I downloaded the Wizard twice and the latest adobe reader.

  It is said that it does not support this file.  What is the problem?

  before trying the 12 elements I had tried elements 7, and it worked...

  Hello Janet,.

  Adobe Reader is designed to read pdf documents.

  What is the type of file you are trying to open.

  After you download PES 12, you will need to install for will be happy to use it.

  It appears in the list of installed programs?

  If yes then what is the error you get when you try to run the software.

  I would also like to know what operating system are you using.

  Kind regards

  Rave

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• I want to use a Terminal Airport Express to extend network provided by my Fios router/modem without going through another airport base.  Is there a way to do this?  I understand that Apple does not support this, but surely there must be a way to do this.

  Can someone tell me how to set up an Airport Express Terminal to expand Network provided by my Fios router/modem without going through an airport as a base?  I understand that apple does not support this use, but my applecare Advisor said it's possible.  Thank you!

  Unfortunately, your AppleCare Advisor is wrong if he or she has told you that an AirPort Express to extend wireless signal of a Fios router/modem.

  Function of "Extend a wireless network" Apple is an exclusive feature that was designed by Apple engineers to extend the signal from another wireless only router from Apple. Thus, the AirPort Express... or any other router Apple besides... would not be able to extend wireless a Fios network.

  SO... you have the possibility to locate the Airport Express where it is needed... And... Connect it to the Fios router/modem with a permanent, wired Ethernet cable connection, then the AirPort Express can 'extend' in this way.

  Or... If you are ready to add a second AirPort Express, connect the first near Fios modem/router with an Ethernet cable, then the second Airport Express could extend the signal first Express wireless.

  Another way to say the same thing, is that if you want an Apple AirPort router to extend wireless network... then you need two Apple routers to achieve this goal.

• Hard drive replacement, windows support, media does not support this computer?

  Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

  My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

• SL500 "this program does not support this system.

  I have an SL500 with 64-bit windows system 7. He has a new system installed. I have correctly installed all necessary drivers. Now, I'm not able to install elements of followind with the system update utility:

  ThinkPad ultranav driver for windows 7

  ThinkPad hotkey features integration pilot

  ThinkPad Ultranav utility

  If I try to manually install, I get an error message "this program does not support this system.

  I had the same problem with Version 3.84.1500 of the driver Thinkpad hotkey features integration

  (and the latest version of 3.84.2000)

  This is a faulty installation.

  2 the missing files.

  Solution to what Lenovo fixes installation:

  Download and install the latest version.

  Download and install the 3.81.0100 version.

  Copy the files SWI32.sys and SWIX64.sys of the 3.81.0100 in the folder version corresponding to the most recent version.

  Run setup.exe from the most recent version.

  According to the properties file SWI32.sys and SWIX64.sys are used as 'System Information Detector'.

  No wonder we get the error message "this program does not support this system.

  Lenovo, please fix.