Display will sometimes a little weak.

Similar Questions

• Tecra M7 - display will not be repeated after 10 minutes of inactivity

  Hello everyone, I'm new here so please be patient with me! :-)

  I've had my new Tecra M7 for about a week now, and while everything else seems to work perfectly, there is a problem with the LCD screen. By default, it is configured to turn off after being idle for 10 minutes. The problem is that it won't resume from this State.

  I see that the laptop itself is working (he reacts to pressure on keys etc.) but I had to Hibernate and resume the screen lights up. The touchpad and keyboard activity doing nothing, only hibernate.

  At the office, I use the laptop dual-view mode with external 19 "LCD screen connected as secondary display. In this case, the external LCD display will resume after moving the mouse or touch the touchpad, but the primary laptop LCD screen will remain inactive until hibernation.

  My question is: do you have someone running into the same question, or that someone has any ideas?

  I thought to upgrade drivers Quadro NVS, but discovered that the pre-installed ForceWare drivers (version 84.52) accompanying are actually more recent than those displayed on the nVidia site (84,26 - confusion)! Also he reports (everywhere in the system), it has 256 MB of video RAM, so the specification Tecra M7 on the box says 128 MB so I don't know which is correct?

  Thanks for all the ideas in advance!
  RADO

  Hello

  Certainly, the nVIDIA Quadro NVS 110 M on the Tecra M7 graphics card supports 128 MB of video RAM.
  Graphics drivers from Toshiba are not the same thing as the manufacturers of original cards drivers. Toshiba drivers are a bit changed.
  You must use the drivers from the site of nVidia, but especially on the site of Toshiba.

  If there is a newer version of the graphics card driver, then remove the old and install the driver from the website of Tosh.
  Additional if the new BIOS have been published, you can try to update. But be careful. Be sure to use the good BIOS and the correct procedure for updating the BIOS.

  Good luck..

• Want K203TX: Display will not wake up

  This is a new laptop.

  I did nothing about it, other than updates of Windows install and create recovery discs.

  • I put the option "turn off the display of" 1 Minute.
  • IMPORTANT: I put the brightness screen completely to zero, the lowest setting possible, by using the keys on the keyboard or the brightness option in Windows.
  • Let the laptop computer idle for a minute, the screen can accommodate as it should (the laptop is put to sleep after 30 minutes, only display that sleeps, the laptop is still awake).
  • Move the mouse, press the keys on the keyboard, the screen doesn't come back to the top. The computer is still in place and in the course of execution-i can switch keyboard backlight On / Off with the keys, but the display will not wake up.
  • Press on the "brightness +" button on the keyboard, the screen wakes up. It is the only way to wake up. The other option is to press on and hold the power button, force a stop down and restart the computer.
  • This occurs ONLY when "brightess" is set to the lowest level. If the brightness is set to again one level above the lowest, the issue cannot be reproduced. Move the mouse or press any keyboard will wake up the screen in this situation.
  • The two graphics Intel HD 5500 and GTX 850 M drivers are up to date.
  • BIOS is updated as well.
  • Battery / sector makes a difference. If the display brightness to the lowest, the screen will ALWAYS fail to wake up, regardless of which power source is being used.

  What should I do? Please don't tell me this is a minor problem and I have to live with it.

  There are so many problems minor with this laptop, and all these add make a total piece of cr...

  My almost 5 years probook with a second generation core i3 processor and no discrete GPU is better than this all-new 5th generation core i7 + laptop GeForce GTX.

  I'm starting to regret this purchase. I should have gotten another probook. Thought that offers want a better "bang for the buck", and now I think it was a huge mistake.

  Anyway, no idea how I can get this fixed? Looks like a right driver problem? Or is this a hardware problem? Can we with a trial of mobile Envy this out and tell me if the problem can be reproduced on their platform? It cannot be reproduced on my Probook.

  Thank you.

  Hi @johnwinchester,

  I'm so glad to hear you're solves the problems you had! The key is that you are now without a problem.

  To answer 2 questions;

  1. to my knowledge, if you purchased the HP 3 year extended warranty on the spot with a cover against accidental damage, then it usually starts from the date of purchase. Be sure and check out I would suggest either go this site check your product warranty and/or contact us.

  2. I'd say creating new recovery disks. The old drive will not help to you on your product. You have the ability to create new disks of recovery of the product without any reported problems. I wouldn't take the chance, I just came out with the old and turned to the future.

  I hope this has helped!

  Have a great day!

• Every time I start up the Visual display will not.

  Original title: Aero

  every time I start up the Visual display will not.  I have to adjust from the start menu.

  I use a portable G6 pavilion. The screen is set at 1360 x 768 256 colors 60 hertz.
  He only did this recently.
  Any answers please.

  every time I start up the Visual display will not.

  Hello

  What exactly on your screen going bad?

  In the meantime try reinstalling the latest graphics drivers for the computer. Find them in the HP website.

• Win 10 offer free said AMD Radeon HD display will have problems?

  An offer to book 10 Windows when it's released was available on the taskbar. I agreed. During the audit of the other information available in this window, he said that

  AMD Radeon HD D 7540 would have display problems?  Not said NOT COMPATIBLE instead, he says "INCOMPATIBLE".

  That shut me down 10 or is there a way around it. I'm not going to get another card or try to enter the Pavilion or bring it to have something changed.

  Thank you very much!  Jack ":-D.

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  There was some problems with certain versions with AMD graphics card.  AMD says that the series Radeon HD 7000 will be supported, but it may require that pilots will be available "at a later date on amd.com:

  "Q: what graphic driver should I use for my AMD Radeon™ GPUS or AMD APU?

  Has : Microsoft said that updated device drivers are not needed at this time, as device drivers are compatible with Windows® 10 technical preview. AMD Radeon™ graphic and expedited customer unit should use the latest drivers available from Windows Update until the official Windows 10 driver support is available on amd.com at a later date. »

• 27 inch Cinema Display will work ok with end of 2013 imac

  Hello

  I have the chance to get a Cinema Display 27 inches for a good price. Will it work ok with my iMac 27 inch end of 2013? If so, is there a difference between this model and the current model of PQ crush?

  Thank you

  Hi, Richard.

  Please visit Apple support communities.

  I understand that you want to use a movie with your iMac screen compatibility.  Without knowing the technical data of the movie screen and looking at your specifications, this view should work with your end of 2013 27-inch iMac.  Your iMac has two Thunderbolt ports that can support the Thunderbolt screens and output Mini DisplayPort.  Below, you will find more information on the specifications of your system and the use of several screens with your iMac.

  iMac (27 inch, end 2013) - technical specifications

  OS X El Capitan: connect multiple monitors to your Mac

  See you soon

• Satellite M30-801 - display will not work after hibernation

  Hello everyone,

  I hope that you will help me with this problem. I have a Toshiba Satellite M30-801 and my warranty is over.

  A few days ago my computer was a few hours of standby. When I rebooted the system, the screen has continued on a black background. No images.
  I am connected to an external monitor to check the video card and this test has been authorized. Now, I'm writing this letters using my laptop connected to the external monitor.
  Also, I noticed that there is blacklight on the screen.

  I had checked the power management for the controllers of USB bus on the control panel.
  I downloaded and installed the latest update of the bios.
  But the screen remains black.
  Could you help me? any ideas?
  Thank you and best regards,

  Stalker99ES

  When you start your laptop without external display can you see anything?
  When you use external monitor that happen when you try to change the display mode by using the FN + F5 key combination?

• sx700hs display will Dim when the camera in position portrait - intermittent

  Sometimes the photos taken during the display is dark when sx700hs placed camera from landscape to portrait position the screen darkens and becomes unusable in the Sun, are very good. It is intermittent and barely had place indoors or in darker conditions. Camera was purchased North of the Chile to replace a damaged device, I'm no longer here so cannot return to the store. Any help is appreciated.
  Paul

  It is intermittent and only happening in the light of the Sun, because this is when you wear your Polarized Sunglasses.  Remove, or get no Polarized Sunglasses.

• content of display problems sometimes traces of the previous window/application XP gets stick for him working window/application

  In windows XP, the traces of previous window/application sometimes stick to her working window/application, can you give me a solution to this problem, I use SP3...

  I will wait your answer with a way to solve the problem.

  Hello

  You can try to update the video card drivers and check if that helps.

  See the links below for more information.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

• The display will decrease or disable at any time despite the power options settings. Interval of sleep mode also become erractic

  Having run all the controls and diagnostics with no results. I started not to use things like the keyboard on the screen that works intermittently, trying to dismiss what we at the same time. Seems that the touchpad icon appeared from time to time for an unknown reason. Little things like that make me wonder if the system is dying of old age.

  I used almost all of the controls displayed in the Forums of the prompt (run as administrator). I have automated convenience store mats_run.exe loaded also. Defrag is on demand, Defender is still running and update, Prevx AV up to date and running. It's time for another point of view!

  This is an older Dell laptop (Vostro 1000, OS: Vista 32-bit basic) so material investigation is limited. Is not overheating because the fan is clean and runs correctly and with good ventilation. One thing I must mention, the battery is dead for a long time so I put battery low and critical properties limited if these conditions should not be a factor. The machine is located at the same place and not be around at all like most laptops.

  Bronco95

  Update your drivers to view the Dell Web site.

  If no joy, reinstall the display adapter drivers.

  If the problem continues, I suspect the harware problem.

  The man likes to play chess; Let's get him some rocks

• Latitude E6410 internal display will not work unless the driver is disabled, regardless of the OS

  Hi all

  I had done research on google without end, dell community support research, etc. and cannot find the solution. The internal computer screen does not work on my Latitude E6410, except if the display driver is disabled. I tried all the drivers on the Dell Web site (including previous versions). The laptop has the card Nvidia nvs 3100 m. I've updated to the latest version of the driver available from Nvidia, and it still doesn't work. However, I can use an external monitor using a VGA connection.

  Tried with Windows 7 x 86 and x 64. X 86 and x 64 Windows 8. Windows XP x 86 same results.

  The strange thing is that if I leave the compatible driver, I can see the screen flash Dell OEM and the beginning of the GUI of Windows boot, but once the driver is started, the screen goes black.

  Ran the Dell diag and video passages. I think the problem is driver/software related like the screen works, but once the driver is loading with Windows, the screen stops video production.

  BIOS is updated. All the other drivers installed.

  Any suggestions?

  Laptop is still under warranty, so if I have to I can get a mobo replaced, but want to exclude all other possibilities first.

  Thanks for all comments and suggestions.

  OK, so I finally found the fix (literally, this morning).

  After browsing the internet, I found another site where this driver was the recommended fix and it worked:

  http://www.Dell.com/support/drivers/us/en/19/DriverDetails?driverId=R287174

  Now, my e6410 is not the nvidia driver and intel, only nvidia card.

  If your e6410 Intel and Nvidia, you may need to play with the pilots to see what will work the Nvidia driver (I'm guessing the driver Dell A08 works well).

  As a couple of my co-workers have the same e6410 and did not have this problem, it seems that the material appears to be the culprit, but only in the sense that a particular version of the Nvidia NVS 3100 m driver works with the Dell driver A08 and some will work with the driver Nvidia 302,80 (9.18.13.280) (which is installed by Windows as well). My Dell was purchases / delivered late 2010. My co-workers that Dell was purchase / shipped in early 2011. I don't know if the short time makes all the difference in what provided Dell (or correctly, what Nvidia to Dell Dell installed), but there is a difference.

  I also tried to upgrade the driver A08 (which is the version of the driver 8.17.12.5922 dated dated: 31/07/2010) to the 9.18.13.280 (as of: 11/06/2012) and it did not work. I had to go back to the 8.17.12.5922 to get the video to work again.

  My Nvidia NVS 3100 m firmware/bios version is: 70.18.53.00.04.

  I hope this helps anyone with this issue, but for now, it seems that the A08 driver is necessary for users of this issue.

  Good luck to all with this question, but I will now consider this matter resolved.

• The batch of BMPS will sometimes add copy file name

  So, my company has a problem that appears every now and then with the new version of Photoshop CC.

  When the batch of Photoshop documents and save them as MPG some documents to interrupt the process and wish to add 'copy' to the end of the name of the file and asks where to save the BMP copy. This happens not all the time well. It can also happen to documents previously batched normally before (with the old version of Photoshop).

  Our process is to cause an action to flatten the document and then "Save as" BMP in a different folder (sometimes substituting an older document sometimes not.) It happens at a time) and then shut down and stop the action. We then set the rest of the documents that are open (sometimes numbering in the 100s) to do the same.

  I know that I can go into Bridge and batch rename, but because it was such a novelty that looks just like a band-aid, not a solution.

  I am at a loss on how to solve this problem with respect to all my designers. I know others this before have met with JPGs and told to change how they save the images. But the export does not have an option for BMPS that I know. I'm also at a loss as to why it worked previously before but now it doesn't and the only difference is the new version of Photoshop. Anyone has any ideas on how to stop this for BMPS?  Is there something that is now checked which was not before, or is there something else I'm missing?

  (Note of fun: it seems that we have traded one problem for another.) Our old problem was actions would put in about 50 'get' lines without apparent reason).

  You don't need to flatten to save BMP files.  BMP file format does not support layers so everything saves BMP Photoshop on will be a flat file.   You're much better off "dosage" with the Image Processor script or the Image Processor Pro plugin bridge or Photoshop.  Actions that you create for use with these scripts are easier to create than those you created for Photoshop batch., no able to resize or save the steps will be needed.  Scripts Photoshop has much better to name capabilities then actions and these scripts provide flexible resizing and options for your use of naming of files.  Options provided by these scripts should ba could improve on you current batch processes. These scripts are usable and the bridge from Photoshop and they are more flexible, then Photoshop batch processing.  Changing your process to use these scripts quite lot of Photoshop.

  

• One click search options displays will not be so, how do I change the engine?

  I've been in the Tools option to check I have other several other search engines checked, as amazon ebay twitter etc. but no menu drop-down will appear in search engines click bar when I click on it... only the option edit my preferences. I checked all the engines appear in the tools, then options, and then search for window and restarted firefox but still nothing when I click on the search bar.
  How can I fix this please?

  Hi Jo.L, looking for different options will show up once you start typing in the search bar...

• When I switch to a new tab in my gmail Inbox, the display will show 2 windows

  example: an open message, gmail displays a list of available products. Then I open a new tab and select a bookmarked site which reviews these products. at this point, the screen is divided into two windows: one, a narrow window showing views; and the other, a wide window showing the message from gmail.

  This also happens when I open a new tab and click on the review marked a bookmark site.

  This question may seem vague because I want to keep my gmail and bookmark sites for security reasons.

  This has nothing to do with the display of bookmarks in the sidebar, but with the creation of bookmark that loads in the sidebar instead of in the main window.
  
  You should not place a check mark in the box "load this bookmark in the sidebar".

• Satellite X 200-20 s plus-pas display, will not start beeps!

  One of the members of the forum seem to have this same problem a year ago so, using the same title, he has used before.

  My Toshiba X 200 - 20s is not start. When I turn on the laptop, power LED lights up and the HDD LED flashes for a few seconds. DVD player turns briefly and DVD LED also flashes. I hear the fans running. The power LED comes on but nothing happens. No error MESSAGE emits a sound signal or messages on the screen. Satellite on the front logo does not light.

  In the PC world for repairs, but the laptop is coming from their repair center said that they do not support this model.

  Have tried all the basics like withdrawal map of power, battery and pressing the power for 30 seconds and turn on the laptop. Open memory and signs of disk HARD but no has not seen what either irrelevant.

  Suspect that something might be wrong with the motherboard or BIOS chip. Don't want to not spend a fortune changing the card mother any suggestion welcome.

  Thanks a lot for your help.

  Indeed, it looks like a serious hardware problem.
  Have you tried to connect an external monitor to check if its display problem?

  In most cases if nothing is visible on 2nd screen, motherboard is affected.
  Maybe the graphics card chip began to malfunction. Well, the fix would be costly, given that the new motherboard must be replaced.