Domain credentials required when connecting

Similar Questions

• domain not available when connecting, using the domain removed pc

  I was good on a pc running XP Pro, sp2. Having a login screen that won't give me the option of resetting passwords (after entering a guess) and told me that the domain is not available. It doesn't have an administrator listed in the drop down menu to the user. I tried to use a reset disk at startup, which said that it defined my Admin password. However, I keep getting 'no domain' error when I try to use it. I typed in 'Administrator' to connect and used the given password, but always get the same answer «no available domain» I don't have access to the domain (pc comes from a medical office, which has since closed).

  Hi AdgChandler,
   
  Here is a link that might be useful for:
  Cached domain logon information
   
  I would recommend you to contact the owner of the computer to get the password reset.
   
  Note: Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the post-it note:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Cannot connect to VCENTER using domain credentials, authorize the exception

  Hi guys,.

  I am running version 5.1 vcenter and my esxi servers are also in 5.1.
  Now, obviously the vcenter server is joined to the domain.

  As we modernize the entire infrastructure, the old DC must be dismantled and from where it is currently shutdown. All roles FSMO etc. have been transferred to the new domain controller and the new domain controller is acting as DNS/DHCP server for the network.

  We have 50 PCs running in the network with server etc and so far no sign of any glitches everywhere else

  
  Now, the question I have is as soon as I stop the old DC, I can no longer access the VCENTER server by using domain credentials. When I turn it on I can connect properly.
  The error I get when I can not connect-

  1. a general error has occurred: Exception allow or
  2. access to the VCENTER server refused.
  3 taking too long to respond.

  I followed the steps here http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1015639 i.e. unjoined vcenter server domain and joined to the domain while having the former DC stop well lit but absolutely no chance.

  I can still connect to local server VCENTER login admin and password but the problem is that my VEEAM backup has failed as well. It is said "task impossible error: cannot complete the connection due to a wrong username or password." which is the reason that I discovered this problem was associated with login via client Vsphere VCENTER.

  Kindly help

  Maybe it's: http://adminotes.blogspot.be/2012/12/vsphere-general-system-error-occurred.html

  Can help you along... Seems they had the same problem on an old DC...

  Although maybe you tried all these things already.

• Is cell required when you use the map applications of conduct?

  Is cell required when you use the map applications of conduct?

  Yes. GPS does not work with a Wi - Fi connection.

• A verified email address is required to connect to iMessage

  I just restored my iPad from a backup to iCloud and now my iMessage cannot connect.  I try to connect and get an error message saying "a verified email address is required to connect to iMessage.  I used my email address for iMessage and FaceTime for the last 4 years without problem, and all of a sudden it must be checked.  When I click on the button to check my email, I'm directed to the page login Apple ID, and when I log in there is no place to check an e-mail address.  I'm about to throw this iPad to the wall and be done with it.

  iOS: Troubleshooting activation FaceTime and iMessage

• LabVIEW visa getting slow when connected to arduino

  Visa in labview when connected to the arduino prog becomes slow

  I checked it passes the codde required, but the action is slow

  and the most important every time to get the o/p I must stop the prog, then start again.

  I tried to do a new prog with visa in singlw loop it was due to long progs and constant, as a single string, but always thinking of things don't work the way I would like to know fast n without stopping the prog. I have attached my n of the required part of the diag block image files

  I used a string of length 10 char n I have my program and a single visa write.

  
  

• Receiving the message 'a network security key is required to connect to oystershores.

  Original title: network security key

  I get a message from a network security key is required to connect to oystershores. What is oystershores?

  Hello

  1. What is the version of the operating system are you using?

  2. when exactly you will get this message?

  3. have you made changes on the computer before this problem?

  If you run Windows 7 or Vista, run clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• What dns role when connecting to a wds Server

  What dns role when connecting to a wds Server

  Hello

   
  1. what operating system is installed on your computer?
  2. do you have problems with internet connections?
  
  I suggest to check the following link and check if it helps to solve the problem.
  http://Windows.Microsoft.com/en-us/Windows7/DNS-domain-name-system-frequently-asked-questions
   
  See also the following link:
  Deployment Services start guide Windows get.
  http://TechNet.Microsoft.com/en-us/library/cc771670 (WS.10) .aspx
   
  Provide us with more information about the issue so that we can better help you.
   
   
  I hope this helps.
  
   

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• After running System Restore my computer asks for a password when connecting and I don't remember the password.

  I am running Vista Home Premium on a laptop Toshiba Satellite L305.  I ran the system restore due to a problem of "Internet Explorer cannot display the website" (by Microsoft troubleshooting guide for this problem) and selected restore point earlier.  Now the computer asks for a password that I don't remember.  I tried all the possible passwords I can think.   There is only a single user account on this computer.  The administrator account should be disabled, it is not an option when connecting safe mode.  I don't have a system repair disc set.   Is it possible to run the system back restore to select a more recent restore point which does not require a password?  Or y at - it another way to connect to the computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  If you tried to use the system restore to solve a problem, but the problem remained or other problems were introduced, you can undo the restore operation. After you cancel the system restore, you can try using a different restore point.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• Once again - ORA-28545: error diagnosed by Net8 when connecting to an agent

  I am trying to connect to a SQL server server 2012

  I make the connections ODBC (called MOFIBO2, MOFIBO3, MOFIBO4) and I have a successful connection to then SQL server.

  The Oracle database is:

  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production

  I made 3 versions of the initdg4odbc.ora and they all look the same:

  # This is an example of initialization file of the agent that contains the HS settings

  # necessary for the database to ODBC gateway

  #

  # HS init parameters

  #

  HS_FDS_CONNECT_INFO = MOFIBOx (MOFIBO2, MOFIBO3 and MOFIBO4)

  HS_FDS_TRACE_LEVEL = off

  #

  # Required for the non-Oracle system environment variables

  #

  #set < varenv > = < value >

  My lisener.ora look like this:

  listener.ora # Network Configuration file: C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = RESP-ora01)(PORT = 1521))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = PLSExtProc)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  )

  (SID_DESC =

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (SID_NAME = RESPTEST)

  )

  (SID_DESC =

  (SID_NAME = MOFIBO2)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  (SID_DESC =

  (SID_NAME = MOFIBO3)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  (SID_DESC =

  (SID_NAME = MOFIBO4)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  )

  ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log

  And my share of tnsnames.ora mofibo then look like this (I did three variants as different "manual" using different methods):

  MOFIBO2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))

  (CONNECT_DATA =

  (SID = MOFIBO2)

  )

  (HS = OK)

  )

  MOFIBO3 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SID_NAME = MOFIBO3)

  )

  (HS = OK)

  )

  MOFIBO4 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MOFIBO4)

  )

  (HS = OK)

  )

  When tnsping to all three versions I get this:

  C:\users\administrator > tnsping mofibo2

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:17

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SID = MOFIBO2)))

  HS = OK))

  OK (10 ms)

  C:\users\administrator > tnsping mofibo3

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:23

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DELTOMBE

  (RELATED) (SID_NAME = MOFIBO3)) (HS = OK))

  OK (10 ms)

  C:\users\administrator > tnsping mofibo4

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:27

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DELTOMBE

  (RELATED) (SERVICE_NAME = MOFIBO4)) (HS = OK))

  OK (0 msec)

  
  

  I created three database link with then in following (user name and password was in the wright case):

  create database MOFIBODB2 link to connect to the "username <>' identified by"password <>"with"MOFIBO2 ";

  create database MOFIBODB3 link to connect to the "username <>' identified by"password <>"with"MOFIBO3 ";

  create database MOFIBODB4 link to connect to the "username <>' identified by"password <>"with"MOFIBO4 ";

  
  

  When I tried to select from a table (select * from clients @ < DATABASELINKHERE >) I get errors (replace MOFIBO2 with MOFIBO3/4 and the same error occurs):

  SQL > select * from customers@MOFIBODB2;

  Select * from customers@MOFIBODB2

  *

  ERROR on line 1:

  ORA-28545: error diagnosed by Net8 when connecting to an agent

  Cannot retrieve the text of the message NETWORK/NCR 65535

  ORA-02063: preceding 2 lines of MOFIBODB2

  
  

  What was my mistake?
  

  
  

  Hello

  In the listener.ora, you have the host as -

  (HOST = RESP-ora01)

  but in tnsnames.ora entries you have.

  (HOST = RESP-ouA02)

  The tnsnames.ora host must be the same as the host of the listener.

  Unless you have a listener running on the RESP-ouA02 it is not clear why the tnsping returns a result.

  Change the host in the tnsnames.ora and let us know what happens.

  Kind regards

  Mike

• PowerShell Plugin and HTTPS domain credentials

  Someone been able to make this work?

  I have configured WinRM on my powershell host and it seems to work fine.  I can connect via negotiate and kerberos very well via HTTPS w / domain credentials.  However, I can't see the powershell plugin to authenticate with a domain service account, it will only connect w / basic authentication enabled by using the local credentials to the host of powershell.

  I tried the following syntax for the username:

  User domain\username

  username@domain

  I happened to notice that I can't connect to the host PowerShell forcing basic authentication using the enter-pssession cmdlet either which brings me to the conclusion that basic authentication cannot make the domain credentials.

  Any ideas would be appreciated.

  > basic authentication cannot field identification information.

  Yes. The first version of the plugin supports basic authentication only and not with the credentials of domain.

  The good news is that in about 2 weeks, an update of the plugin version would be released that would provide support for kerberos.

  Thank you.

• View domain for the server connection help please

  OK, I don't know where to put this so I hope it's a good place. I tried to install view connection server on my last windows 2003 server. I built a laboratory at home with a dedicated server for vCenter, AD and view connection. When trying to install view connection Server 4.5 sound telling me:

  "This computer is a member of a domain, but no server connection can be found. Please make sure that this computer is properly connected to a domain and that a domain controller is available before to perform this installation again'

  OK, so I logged on windows Server 2003 view connection using active directory so why it gives me this error?

  Thank you.

  Start by pingging your AD server's DNS server.  Also, try ping the DNS server of the virtual machine that you are trying to install the view on.  You can try it joined to the domain by using the command NET DOM.  We do in our environment at all correct control but can not quite understand our this is the problem.  You can also check the event viewer on the virtual computer to see if he throws all Kerberos events associated with the certificate expiring this testimony of course that the server may need to be joined to the domain.  The virtual machine was interrupted for a while?

  See you soon,.

  Chad King

  VCP-410. Server +.

  Twitter: http://twitter.com/cwjking

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• vCLI and domain credentials

  This forum is extremely buried so I'm not sure how active it is, but I went through the vCLI reference guide trying to find a way to run vicfg - backup.pl with domain credentials.  From my understanding, I can use a session file or a file of config to simply the process of connection.  I found the config file but not the session file, but I am only able to use accounts the on the esx server.  I guess I have to first connect to the vCenter server, and then from there, connect to an ESX Server, but I'm not sure.  Everything that works it's cool with me.

  Any help would be appreciated.

  -Gunnar

  No session file does not store the credentials.  It contains only the session cookie and the session is timeout after a certain time.

• Still play songs from my iPhone when connected to wifi

  Had this problem before, but it stopped happening a while ago only to re - emerge with the iOS 10 update.

  I'm running on an iPhone 6 and used to play my music library on shuffle.

  Over the years, I've deleted some songs from my library of songs, but they remain available for re - download in iCloud.

  However, from time to time, if I play songs on shuffle when connected to wifi, one of these songs removed will be available on my phone and play.  It does not download to my phone and still only available for download on iCloud.

  Is it possible to stop these removed songs to play on quite my phone when connected to wifi?

  I'll add that I'm not on all subscriptions either except to increase my storage iCloud.

  Post edited by: sound_man

  I believe that you open the music application, select "download music", then make your choices from there.  If you do not select the "download music" it will first play all the songs that you have purchased.