Domain group policy does not work on a station

Similar Questions

• Peer Networking Grouping Service does not work; How can I make it work?

  I use Windows 7 and trying to set up a home network I am unable. After you run the troubleshooter, the only problem is that the Peer Networking Grouping Service does not work. Messages to indicate there is no other problems other than Peer name resolution Protocol (PNRPsvc) Service or the Peer Neetworking Identity Manager (p2pimsvc) Service is not running.

  How can I solve this problem?

  Hello

  First delete the file idstore.sst from the following location: C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst and once you remove, restart the service Peer Networking grouping.

  Follow the steps to restart the service:

  a. click Start, type Services.msc in the search box and press enter.

  (b) in the Services window, search for Peer Networking Grouping.

  c. make a right click the service: peer networking grouping and click restart.

  Also, see the following Microsoft articles:

  Establishment of a network domestic:
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Why can't I create a homegroup? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  Hope the information is useful.

• How can I fix it? message is peer networking group service does not work

  When I connect, I can get online.   When my wife logs on the same computer, it is and error and cannot get online.  I get a message in addition to ppeer service networking group does not work that States cannot access service Group Policy client and see the system event log.  Is there a way to fix this?

  Hi thadkresho,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that your wife is not able to connect on the same computer. Provide the following information for a better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  ·         What version of the operating system is installed on the computer?

  ·         If it works much earlier?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  Let us know if you need more assistance.

  Thank you.

• Group-lock does not work

  Hello

  I enabled the functionality of group-lock on a group of C2L VPN but the ASA does not add the tunnel-group-name value in the RADIUS packet sent to the server for authorization.

  In the past, I used the function of locking-group several times without problem. This is the first time, it does not work and I wonder if it can depends on the old version of asa that I use (8.6.1(2)).

  Here the conf and the asa debug all the RADIUS:

  Configuration:

  attributes of Group Policy Network_Users
  value x.x.x.x DNS server
  Ikev1 VPN-tunnel-Protocol
  value of group-lock Network_Users
  VLAN 24

  Debug RADIUS all the:

  RADIUS packet decode (authentication request)

  --------------------------------------
  Data of raw packets (length = 156)...
  01 cb 00 9 c 97 84 6 d 33 f0 69 ee 8f 1 c 25 a2 fa |  ......m.3.i...%.
  AB 08 a1 c6 0 01 a 78 30 31 35 35 36 32 33 02 12 |  ... xxxxxxxx...
  14 80 52 4 a 72 0e e5 a1 69 d6 ee d3 d3 b9 67 0a |  .. RJr... i...g
  05 06 8 b 20 00 06 06 00 00 00 02 07 06 00 00 c0 |  ... ............
  00 01 0e 1e 2e 2e 35 39 37 31 35 39 2nd 32 32 30.  ... x.x.x.x
  0f 1F 39 2e 2e 34 33 37 32 34 38 2 32 30 32 3d |  .. 94.37.248.202 =.
  06 00 00 00 05 42 39 2e 0f 34 33 37 2nd 32 34 38 |  ..... B.94.37.248
  2nd 32 30 32 04 06 16 05 21 1 a 22 00 00 00 09 ac |  . 202...! » ....
  1 01 c 69 70 3A 6f 73 75 72 63 65 69 70 39 3d 2d |  .. IP:Source - ip = 9
  2E 2e 34 33 37 32 34 38 2 32 30 32 |  4.37.248.202

  Packet analyzed data...
  RADIUS: Code = 1 (0x01)
  RADIUS: Identifier = 203 (0xCB)
  RADIUS: Length = 156 (0x009C)
  RADIUS: Vector: 97846DA233F069EE8F1C25FAAB08A1C6
  RADIUS: Type = 1 (0x01) - user name
  RADIUS: Length = 10 (0x0A)
  RADIUS: Value (String) =
  78 30 31 35 35 36 32 33 |  xxxxxxxx
  RADIUS: Type = 2 (0x02) username-password
  RADIUS: Length = 18 (0x12)
  RADIUS: Value (String) =
  14 80 52 4 a 72 0e e5 a1 69 d6 ee d3 d3 b9 67 0a |  .. RJr... I have... g
  RADIUS: Type = 5 (0x05) NAS-Port
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (Hex) = 0x8B20C000
  RADIUS: Type = 6 Type of Service (0x06)
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (Hex) = 0x2
  RADIUS: Type = 7 (0x07) Framed-Protocol
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (Hex) = 0x1
  RADIUS: Type = 30 (0x1E) Called-Station-Id
  RADIUS: Length = 14 (0x0E)
  RADIUS: Value (String) =
  2nd 2nd 35 39 37 31 35 39 2nd 32 32 30.  x.x.x.x
  RADIUS: Type = 31 (0x1F) Calling-Station-Id
  RADIUS: Length = 15 (0x0F)
  RADIUS: Value (String) =
  39 2e 2e 34 33 37 32 34 38 2 32 30 32 |  94.37.248.202
  RADIUS: Type = 61 (0x3D) NAS-Port-Type
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (Hex) = 0x5
  RADIUS: Type = 66 Tunnel-Client-Endpoint (0x42)
  RADIUS: Length = 15 (0x0F)
  RADIUS: Value (String) =
  39 2e 2e 34 33 37 32 34 38 2 32 30 32 |  94.37.248.202
  RADIUS: Type = 4 NAS-IP-Address (0x04)
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (IP address) = 172.22.5.33 (0xAC160521)
  RADIUS: Type = 26 (0x1A) vendor-specific
  RADIUS: Length = 34 (0 x 22)
  RADIUS: Vendor ID = 9 (0 x 00000009)
  RADIUS: Type = 1 (0x01) Cisco-AV-pair
  RADIUS: Length = 28 (0x1C)
  RADIUS: Value (String) =
  69 70 3A 6f 73 75 72 63 65 69 70 39 34 2nd 3d 2d is |  IP:Source - ip = 94.
  2e 33 37 32 34 38 2 32 30 32 |  37.248.202
  Send 172.22.39.1/1812 pkt
  RADIUS_SENT:Server response time
  Ray mkreq: 0x1a6
  alloc_rip 0x00007ffec924aa48
  new application 0x1a6--> 204 (0x00007ffec924aa48)
  obtained the user 'xxxxxxxx '.
  has obtained the password
  add_req 0x00007ffec924aa48 session 0x1a6 204 id
  RADIUS_DELETE
  remove_req 0x00007ffec9249ec0 0x1a5 203 session id
  free_rip 0x00007ffec9249ec0
  RADIUS_REQUEST
  RADIUS.c: rad_mkpkt
  rad_mkpkt: ip:source - ip = 94.37.248.202

  RADIUS packet decode (authentication request)

  As mentioned previously, the package does not contain the ID 146 Tunnel-Group-Name typically added when the group-lock has been activated. I'm talking about this:

  RADIUS: Type = 26 (0x1A) vendor-specific
  RADIUS: Length = 32 (0x20)
  RADIUS: Vendor ID = 3076 (0x00000C04)
  RADIUS: Type = 146 (0 x 92) - Tunnel-group name
  RADIUS: Length = 26 (0x1A)
  RADIUS: Value (String) =
  54 45 5f 4 c 56 50 4th 5f 49 6e 74 72 61 6 65 74 |  Network_Users
  RADIUS: Type = 26 (0x1A) vendor-specific
  RADIUS: Length = 12 (0x0C)
  RADIUS: Vendor ID = 3076 (0x00000C04)
  RADIUS: Type = 150 (0 x 96) Client-Type
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (integer) = 1 (0x0001)

  Thank you

  Maurizio

  I wonder if your problem is related to this bug:

  CSCsw31922

  Maybe upgrade to 8.6.1(5) or later will solve the problem.

  --

  Please do not forget to select a correct answer and rate useful posts

• Dell coming Pro 11 (7130) does not work with dock station (K10A) and mobile keyboard (K12A)

  Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.

  What can I do?

  Thank you!

  Hello

  same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.

  I've updated my 7130 windows 10 with the latest bios drivers but no luck.

  Time for dell start with patches!

  Benny

• Group Policy does not apply on Windows 7 with the Windows 2008 R2 domain controller

  Trying to troubleshoot a GP associated question where, seems, desktops (Win 7 Enterpise) do not receive the last group policy.  He doesn't seem to get at some point after an arbitrary time period (two or three weeks), but it is insanse.

  -Have you checked with the GPMC (connect to each domain controller individually) that all four domain controllers are running the same GP later version; no replication errors.

  -No errors appear on the workstation or server logs (logs\winlogon or event viewer-> Group Policy).

  -gpupdate/force runs without error

  -gpresult and RSoP both supplement fine, watch the GP is be applied correctly, to APPLY THE OLD GP SO!

  -No error up with whent the following undocumented debugging is also enabled: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Diagnostics] "GPSvcDebugLevel" = dword:00030002

  So, my little finger tells me that the problem is the GP are not be tire/replicated/either at the workplace in a timely mannger (reboot, gpupdate/force, etc.) but do not know how to see what is the interval, troubleshoot, etc.

  The server gurus hang out more in the TechNet forums.  This forum deals with questions of security of user, your question would be a better fit in the server instances:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows Server 2008 - Group Policy does not

  Hello

  I recently deployed a windows 2008 (32 std) additional domain controller for our windows 2003 DC. and I moved to make PDC FSMO roles in 2008. now I get error when I open Group Policy and none of the policy is to take users. the error is "the network name is not found.

  I run the command adprep/adprep domainprep/gpprep command when I deploy the windows Server 2008. below error, I get in the event viewer for the same thing.

  "The Software Installation Group Policy Client Side Extension was impossible to apply one or more parameters, because the changes must be processed before logon startup or user system. The system will wait for the treatment group strategy to finish completely before the next startup or logon for that user, and this may result in slow startup and startup performance '.

  Please advice. Thank you

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

   

  http://social.technet.Microsoft.com/forums/en-us/categories/

• The Customer Service of group policy does not logon, access is denied - Windows 8 need quick help

  I use windows 8, I bought already on my laptop about three months ago.

  I have two accounts and "Managing" and "Kyle", I went to enter my password for "Kyle" account which has all my saved and valuable documents which I can't account "administer".

  A message appears

  "The Group Policy Client service could not sign-in.

  "Access denied."

  Please someone help me I need urgent access to my laptop

  Thank you

  Hi Kyle,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, that you have problems with registration on the user account on the computer of Windows 8.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  I would appreciate if you can help me with the following information.

  (1) is the computer that is connected to a domain or any form of computer network?

  (2) you are the computer administrator?

  If it's just a PC at home, connect using the administrator account and check the Group Policy client service.

  (a) press the Windows key + R, type services.msc in the Run dialog box and click on enter.

  (b) to navigate down the list until you find Group Policy Client.

  (c) make sure that it is set to Automatic and is started. You can change to double clicking on it and selecting the drop down.

  (d) try the user account login and check.

  It will be useful.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• The user group policy does not

  Recently, I noticed that the group policies that are assigned the user to my organization OR may not apply.  When I do a gpresult, does not that the virtual machine is looking this UO at all even.  View machines are supposed to load user policies as any other workstation domain?

  I found the cause, a stupid mistake on my part.  There is a strategy of the computer that had active loopback, but replace the value.

• In FF5.0 this tab groups feature does not work: ' once you have created your first group, the of the tab group button will be added to the right end of the Strip to tabs to give you a one-click way to return to your groups.»

  The phrase in quotes in my question is instructions under "what are the groups of tabs? (Redirected from "what is Panorama?")

  If this button does not appear then you can drag it out of range of the tool bar on the tab toolbar customization window yourself.

  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  • https://support.Mozilla.com/kb/back+and+forward+or+other+toolbar+items+are+missing

• The Customer Service of group policy does not logon, access is denied.

  I tried to reboot in safe mode, but it does not log it. There is no secondary logon to use. The only record of restore point was forward who has not at the problem of the evening. Where can I go from here?

  Disable hide hidden files and Hide protected operating system files

  Open my computer

  Press ALT + T

  Click options, and then view the folder

  Click on show hidden files folders and drives

  Uncheck the Hide protected files BONES

  Then use the volume shadow copy service store to restore a previous backup of the ntuser *. * file

  To make this opening users profile folder in c:\users\

  Right-click on the name of the profile

  in the tabs list, click Previous Versions

  Choose the second most recent snapshot and click Open

  Copy all the ntuser files and paste them to the user profile folder c:\users\[profilename]

  replace all and restart

  Log in as the user

• Satellite L755 - Webcam does not work - interactive Windows station

  Dear community of Toshiba,

  I have a Toshiba L755 series. I was able to use the webcam with Skype. When running Skype recently, I was surprised to see that the camera could not be found.
  I went to the Device Manager to see what might be the problem, and there I saw everything 'imaging devices', as if the camera equipment did not exist originally.

  I tried and then searching for the hardware changes. New hardware has been found, but then try to install the driver, I get a message saying that:
  + Windows encountered a problem installing the software driver for your device. +
  + Error trying to install it and Windows found driver software for your device but he bumped. +
  + This operation requires an interactive window station. +

  Note that the device is recognized as: TOSHIBA Web Camera MP.
  I tried searching online for this find of t pilot but just could not.
  I also tried to download and install the driver from Toshiba support, but once again, still does not.

  Help, please.

  Thank you

  Hello

  On the European driver Toshiba page, you can find the webcam driver v2.0.0.19 and v2.0.0.13.

  Have you tried both?

  Usually the software of webcam located in the control panel-> software
  Uninstall the webcam software it and reboot the laptop.
  Now, you should clean the registry because each installation leaves other securities in the register that I can recommend a tool its freeware CCleaner and cleans the system very well

  After cleaning the registry, restart the system and try to install the webcam driver v2.0.0.19

  Good luck

• cross-domain-policy does not work

  I get an error message:

  Error #2048: security sandbox violation: http://www.m.com/p/bin-debug/main.swf Cannot load data from http://rateservice.m.com/rateservice.svc/ .

  My cross-domain file to http://rateservice.m.com is :

  <?xml version="1.0"?>
  <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
  <cross-domain-policy>
  <allow-access-from domain="*.m.com"/>
  </cross-domain-policy>
  

  using m as alias

  Please tell us how do I solve this problem, as it should work. I did a test of firbug and the cross domain is to be found by the eyelashes of firebug

  1. There is no closing tag:

  http://www.adobe.com/xml/dtds/cross-domain-policy.dtd"/>
  

• Group Policy does not logon, access is that denied__ - your user profile was not loaded correctly.

  Hello

  Portable autonomous-A of Acer Vista

  any PRO to help me get out of these two errors produced one after the other?

  I got the first problem (the strategy of group...) but I tried to log on again and he succeeded for a few days, but whenever I had to log on and reconnect

  Then the second problem (your profile...) took place and I could not log on with this user acc, my settings is lost...

  Then I had to go to the registry (by searching for help on the forums) to remove the SID, and I also deleted the user account and another

  In as long as administrator, I have no problem, would not restore or backup, cuz my documents would be lost (and will be)

  Now with this user VAC, I have the same problem, seems there is something out there do this boredom...

  Mentioning that I used to use my wireless (access point), but due to an expert (working at the network service provider) that has me using it if really necessary, I prefer not to use (in fact as a promotion I received the package of free wireless access point :)

  I'm not an expert and so here I am left high and dry to understand what could be the trouble maker (or software) program

  The problem is on my nerves. I even tried to account for one-third and untangle by removing the SID and new admin session of the ACC, and restart, but failed to fix.

  PLEASE HELP ME AS SOON AS POSSIBLE

  Armi

  Corruption user such as you are experiencing may be caused by several things: malware, failure of hardware, the corruption of system files because of inappropriately, etc.. So to begin troubleshooting:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is clean and the problem persists, test the equipment starting with the hard drive, then the RAM.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  In all cases you should backup your data on external media such as an external hard drive or USB thumb drive NOW.

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Retention policy does not work

  Hello
  
  I have 2 node RAC 10 g 2 db. Operating system is 5.8 RHEL. I'm with RMAN for full backups every night. The problem is the old backups not automatically deleted through the retention policy, which is 7 days. For example, now, I have at least one backup set that is about 1 month. Here is a part of the log RMAN:
  
  delete noprompt obsolete device type disk;
  RMAN retention policy apply to the order
  channel ORA_MAINT_DISK_1: sid = 4327 instance = MYYRAC1 devtype = DISK
  allocated channel: ORA_MAINT_DISK_1
  output channel: ORA_DISK_1
  RMAN retention policy is set to 7 days recovery window
  not found obsolete backups
  output channel;
  
  Thus, the final problem which is the disc will sooner or later totally old full backups.

  Hello;

  Obsolete backups can be complex. Watch the incremental backups that extend the retention period. This simple command can help:

  RMAN > OBSOLETE REPORT.

  Otherwise, I have this note:

  http://www.Visi.com/~mseberg/RMAN/obsolete_backups.html

  If the catalog has no problem and retention policy is set, it almost always works:

  RMAN > DELETE noprompt obsolete;

  More information

  http://www.Visi.com/~mseberg/RMAN/backup_redundancy.html

  http://www.Visi.com/~mseberg/RMAN/recovery_window.html

  Best regards

  mseberg