Retention policy does not work

Similar Questions

• Domain group policy does not work on a station

  Hello

  Been the last week reading everything that is available on the internet.

  Win 2008 R2 Standard

  Group Policy created and linked to an OU - ministere1

  in the AD, the container has users in it that the policy should apply to.

  everything works fine on PC1 for User1

  everything works fine on PC1 for User2

  does not work on PC2 or for User1 or 2

  RPC is enabled

  Domain controller - use the default

  gpupdate/force - shows update is successful

  Gpresult /R shows the groups appropriate for user 1 and 2 but can be applied strategy local politics

  is there something I need to turn it on to use the distributed domain GPO?

  BTW.

  politics is Frank - maps a network as a reader folder (checked the privileges and as said before - this works fine on PC1 but not on PC2)

  Both PC's are Win 7 64 bit Pro

  When you try to test the strategy side server it shows RPC server not available

  RSoP will also show access denied on PC2

  If you have any solution for this problem - please help

  In this case, Peter

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• RMAN retention policy does not log source archive

  Oracle 11.2
  Windows server 2008
  CONFIGURE ARCHIVELOG DELETION POLICY TO SAVED 1 TIME TO THE DISK.
  
  I ran after command
  TIME BACKUP ARCHIVELOG ' SYSDATE-6' UNTIL ' SYSDATE-1';
  
  RMAN > ARCHIVELOG BACKUP OF TIME ' SYSDATE-6' until ' SYSDATE-1';
  
  From backup may 29, 13
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 386 type device = DISK
  allocated channel: ORA_DISK_2
  channel ORA_DISK_2: SID = 773 type device = DISK
  jump the C:\ARC\ARC0000000564_0808506935.0001 archived log file; already supported
  up to 1 times
  \\172.16.1.2\DATABASE_BACKUP\RMAN\ARCHIVE_34\ARC00 of the archived log file skipping
  00000564_0808506935.0001; already saved 1 time
  \\172.16.1.2\DATABASE_BACKUP\RMAN\ARCHIVE_34\ARC00 of the archived log file skipping
  00000565_0808506935.0001; already saved 1 time
  jump the C:\ARC\ARC0000000565_0808506935.0001 archived log file; already supported
  up to 1 times
  \\172.16.1.2\DATABASE_BACKUP\RMAN\ARCHIVE_34\ARC00 of the archived log file skipping
  00000566_0808506935.0001; already saved 1 time
  jump the C:\ARC\ARC0000000566_0808506935.0001 archived log file; already supported
  up to 1 times
  jump the C:\ARC\ARC0000000567_0808506935.0001 archived log file; already supported
  up to 1 times
  \\172.16.1.2\DATABASE_BACKUP\RMAN\ARCHIVE_34\ARC00 of the archived log file skipping
  00000567_0808506935.0001; already saved 1 time
  jump the C:\ARC\ARC0000000568_0808506935.0001 archived log file; already supported
  up to 1 times
  \\172.16.1.2\DATABASE_BACKUP\RMAN\ARCHIVE_34\ARC00 of the archived log file skipping
  00000568_0808506935.0001; already saved 1 time
  \\172.16.1.2\DATABASE_BACKUP\RMAN\ARCHIVE_34\ARC00 of the archived log file skipping
  00000569_0808506935.0001; already saved 1 time
  jump the C:\ARC\ARC0000000569_0808506935.0001 archived log file; already supported
  up to 1 times
  \\172.16.1.2\DATABASE_BACKUP\RMAN\ARCHIVE_34\ARC00 of the archived log file skipping
  00000570_0808506935.0001; already saved 1 time
  jump the C:\ARC\ARC0000000570_0808506935.0001 archived log file; already supported
  up to 1 times
  Backup finished 29 May 13
  
  RMAN >
  
  
  According to policy to delete rman does not delete source archive logs.

  This is the backup... command where the delete command

  obsolete report;

  Confirm if the archivelog you want to remove, then

  remove obsolete;

  so if you had manually deleted archivelogs use below to remove the entry of records controlfile

  overlap archivelog all;

  list expired archivelog all;

  REMOVE EXPIRED ARCHIVELOG ALL;

  edited part-

  read [url http://docs.oracle.com/cd/B28359_01/backup.111/b28270/rcmconfb.htm#CHDCFHBG]

  This plocy deletion makes these archivelog eligible for deletion. They will be deleted automatocally if they are inside the FRA FRA is short of space.

  Published by: Patricia kebe on May 29, 2013 01:16

• cross-domain-policy does not work

  I get an error message:

  Error #2048: security sandbox violation: http://www.m.com/p/bin-debug/main.swf Cannot load data from http://rateservice.m.com/rateservice.svc/ .

  My cross-domain file to http://rateservice.m.com is :

  <?xml version="1.0"?>
  <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
  <cross-domain-policy>
  <allow-access-from domain="*.m.com"/>
  </cross-domain-policy>
  

  using m as alias

  Please tell us how do I solve this problem, as it should work. I did a test of firbug and the cross domain is to be found by the eyelashes of firebug

  1. There is no closing tag:

  http://www.adobe.com/xml/dtds/cross-domain-policy.dtd"/>
  

• Policy setting does not work: 'turn off the upgrade to the latest version of Windows through Windows Update.

  Why this parameter has been added to Windows 7 Pro policy if it does not work?

  Computer--> administrative templates policy-> Windows-> Windows Update components

  I can't upgrade yet.  I'd like to, but I can't.  I lost a whole weekend, taking advantage of the new version of the screen of BSOD in Win10 until I dropped.  I need to backup my files, applications, and configuration information and do a clean install of Win7.  I'll do it when I have time, right now I have not, I work 40 hours a week and I go to school at night.  But if my computer is overheating because it begins to turn during the day I have to send M$ by Bill...

  Hi William,.

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  I understand that the policy settings do not work and we will be happy to help you resolve the problem. From now on, I recommend running System File Checker tool and check.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Press the Windows key + X , and then click prompt (Admin)

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

• Just buy Netflix app for the computer! Apple has received the payment, but the app does not work!

  A Netflix app from iTunes for $9.99 and it does not work!

  You don't need a Netflix app for a Mac computer. You can watch Netflix on your Mac by going to http://www.Netflix.com/ and clicking "Sign In" to you connect with your Netflix account.

  Try to request a refund for the application by following the instructions in the article I linked below.

  Mac App Store: Frequently asked Questions (FAQ) - Apple Support

  What is the policy for reimbursement of the Mac App Store?

  If you encounter a technical problem with a soft, first contact the developer of the application for assistance. You will find their contact information on the page of the application in the Mac App Store. If this is not the problem, contact the Support Customer Mac App Store.

  I hope you find this information useful.

  Best regards

  Austin

• Windows server 2012 RDP Clipboard does not work for regular users

  Hello again,

  I wanted a little more secure our 2012 server.

  I disabled via GPO, local disk and printer redirection when a user connect through rdp.

  But I activated the policy to users, so while you can do the redirection of the Clipboard between there pc and rdp Server (copy / paste)

  Problem is that it works in only for the admin.

  The fact that local drive redirection is disable that copy / paste does not work?

  Force the update of the Group Policy object and I sign the user out and reconnect and copy and paste does not work

  and also, the process rdpclip.exe is running. I have restart this process.

  Any help or guide

  Thank you once again.

  Hello

  As I mentioned in your other Thread that we do not respond to server problems in this community.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I fix it? message is peer networking group service does not work

  When I connect, I can get online.   When my wife logs on the same computer, it is and error and cannot get online.  I get a message in addition to ppeer service networking group does not work that States cannot access service Group Policy client and see the system event log.  Is there a way to fix this?

  Hi thadkresho,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that your wife is not able to connect on the same computer. Provide the following information for a better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  ·         What version of the operating system is installed on the computer?

  ·         If it works much earlier?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  Let us know if you need more assistance.

  Thank you.

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• my password does not work, but I could connect before

  my password does not work but I could connect once before, when I tried to create a password reset disk i cant.im using the account invited now and don't have any other administrator account with the paswords working or I know.

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Group-lock does not work

  Hello

  I enabled the functionality of group-lock on a group of C2L VPN but the ASA does not add the tunnel-group-name value in the RADIUS packet sent to the server for authorization.

  In the past, I used the function of locking-group several times without problem. This is the first time, it does not work and I wonder if it can depends on the old version of asa that I use (8.6.1(2)).

  Here the conf and the asa debug all the RADIUS:

  Configuration:

  attributes of Group Policy Network_Users
  value x.x.x.x DNS server
  Ikev1 VPN-tunnel-Protocol
  value of group-lock Network_Users
  VLAN 24

  Debug RADIUS all the:

  RADIUS packet decode (authentication request)

  --------------------------------------
  Data of raw packets (length = 156)...
  01 cb 00 9 c 97 84 6 d 33 f0 69 ee 8f 1 c 25 a2 fa |  ......m.3.i...%.
  AB 08 a1 c6 0 01 a 78 30 31 35 35 36 32 33 02 12 |  ... xxxxxxxx...
  14 80 52 4 a 72 0e e5 a1 69 d6 ee d3 d3 b9 67 0a |  .. RJr... i...g
  05 06 8 b 20 00 06 06 00 00 00 02 07 06 00 00 c0 |  ... ............
  00 01 0e 1e 2e 2e 35 39 37 31 35 39 2nd 32 32 30.  ... x.x.x.x
  0f 1F 39 2e 2e 34 33 37 32 34 38 2 32 30 32 3d |  .. 94.37.248.202 =.
  06 00 00 00 05 42 39 2e 0f 34 33 37 2nd 32 34 38 |  ..... B.94.37.248
  2nd 32 30 32 04 06 16 05 21 1 a 22 00 00 00 09 ac |  . 202...! » ....
  1 01 c 69 70 3A 6f 73 75 72 63 65 69 70 39 3d 2d |  .. IP:Source - ip = 9
  2E 2e 34 33 37 32 34 38 2 32 30 32 |  4.37.248.202

  Packet analyzed data...
  RADIUS: Code = 1 (0x01)
  RADIUS: Identifier = 203 (0xCB)
  RADIUS: Length = 156 (0x009C)
  RADIUS: Vector: 97846DA233F069EE8F1C25FAAB08A1C6
  RADIUS: Type = 1 (0x01) - user name
  RADIUS: Length = 10 (0x0A)
  RADIUS: Value (String) =
  78 30 31 35 35 36 32 33 |  xxxxxxxx
  RADIUS: Type = 2 (0x02) username-password
  RADIUS: Length = 18 (0x12)
  RADIUS: Value (String) =
  14 80 52 4 a 72 0e e5 a1 69 d6 ee d3 d3 b9 67 0a |  .. RJr... I have... g
  RADIUS: Type = 5 (0x05) NAS-Port
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (Hex) = 0x8B20C000
  RADIUS: Type = 6 Type of Service (0x06)
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (Hex) = 0x2
  RADIUS: Type = 7 (0x07) Framed-Protocol
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (Hex) = 0x1
  RADIUS: Type = 30 (0x1E) Called-Station-Id
  RADIUS: Length = 14 (0x0E)
  RADIUS: Value (String) =
  2nd 2nd 35 39 37 31 35 39 2nd 32 32 30.  x.x.x.x
  RADIUS: Type = 31 (0x1F) Calling-Station-Id
  RADIUS: Length = 15 (0x0F)
  RADIUS: Value (String) =
  39 2e 2e 34 33 37 32 34 38 2 32 30 32 |  94.37.248.202
  RADIUS: Type = 61 (0x3D) NAS-Port-Type
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (Hex) = 0x5
  RADIUS: Type = 66 Tunnel-Client-Endpoint (0x42)
  RADIUS: Length = 15 (0x0F)
  RADIUS: Value (String) =
  39 2e 2e 34 33 37 32 34 38 2 32 30 32 |  94.37.248.202
  RADIUS: Type = 4 NAS-IP-Address (0x04)
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (IP address) = 172.22.5.33 (0xAC160521)
  RADIUS: Type = 26 (0x1A) vendor-specific
  RADIUS: Length = 34 (0 x 22)
  RADIUS: Vendor ID = 9 (0 x 00000009)
  RADIUS: Type = 1 (0x01) Cisco-AV-pair
  RADIUS: Length = 28 (0x1C)
  RADIUS: Value (String) =
  69 70 3A 6f 73 75 72 63 65 69 70 39 34 2nd 3d 2d is |  IP:Source - ip = 94.
  2e 33 37 32 34 38 2 32 30 32 |  37.248.202
  Send 172.22.39.1/1812 pkt
  RADIUS_SENT:Server response time
  Ray mkreq: 0x1a6
  alloc_rip 0x00007ffec924aa48
  new application 0x1a6--> 204 (0x00007ffec924aa48)
  obtained the user 'xxxxxxxx '.
  has obtained the password
  add_req 0x00007ffec924aa48 session 0x1a6 204 id
  RADIUS_DELETE
  remove_req 0x00007ffec9249ec0 0x1a5 203 session id
  free_rip 0x00007ffec9249ec0
  RADIUS_REQUEST
  RADIUS.c: rad_mkpkt
  rad_mkpkt: ip:source - ip = 94.37.248.202

  RADIUS packet decode (authentication request)

  As mentioned previously, the package does not contain the ID 146 Tunnel-Group-Name typically added when the group-lock has been activated. I'm talking about this:

  RADIUS: Type = 26 (0x1A) vendor-specific
  RADIUS: Length = 32 (0x20)
  RADIUS: Vendor ID = 3076 (0x00000C04)
  RADIUS: Type = 146 (0 x 92) - Tunnel-group name
  RADIUS: Length = 26 (0x1A)
  RADIUS: Value (String) =
  54 45 5f 4 c 56 50 4th 5f 49 6e 74 72 61 6 65 74 |  Network_Users
  RADIUS: Type = 26 (0x1A) vendor-specific
  RADIUS: Length = 12 (0x0C)
  RADIUS: Vendor ID = 3076 (0x00000C04)
  RADIUS: Type = 150 (0 x 96) Client-Type
  RADIUS: Length = 6 (0x06)
  RADIUS: Value (integer) = 1 (0x0001)

  Thank you

  Maurizio

  I wonder if your problem is related to this bug:

  CSCsw31922

  Maybe upgrade to 8.6.1(5) or later will solve the problem.

  --

  Please do not forget to select a correct answer and rate useful posts

• excludespecified does not work

  Hello world

  I worked with a VPN for remote access, where everything must be sent through the tunnel via VPN, but specific to a public IP traffic. I tried to use the "excludedspcified" statement in group policy, but it does not work. When the VPN Client must be connected to the ASA and I check the details of router-> secure routes I can only see 0.0.0.0/0. But when I use the statament of "tunnelespecified" it works as it should and Secure routers are registered correctly.

  My configuration is:

  standard permits the TUNNEL of SPLITTING host 72.XX access list. XX. XX

  !

  internal TEST group strategy

  TEST group policy attributes

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy excludespecified

  Split-tunnel-network-list value of SPLIT TUNNEL

  !

  type tunnel-group TEST remote access

  General attributes of tunnel-group TEST

  address admin-pool pool

  Group-RADIUS authentication server

  Group Policy - by default-TEST

  IPSec-attributes of tunnel-group TEST

  pre-shared-key *.

  I find a Bug or something, but I found nothing. These are versions of software:

  ASA: 8.2 (1) 11

  ASDM: 6.2 (1)

  VPN client: 5.0.07.0410

  Thanks in advance,

  Jose

  Hello Jose,.

  In your VPN client, you selected the checkbox "allow LAN access?

  Can you please test with this option turned on and let us know the results?

  Do not look only secure roads, after you activate that option try to send real traffic to the public IP address.

  Daniel Moreno

  Please note any workstation that will be useful

• HTTP redirection does not work on BNG (ASR9000, XR 4.3.0)

  Hi all

  (1) I have to do for cool subscribers redirect http . Ideally I need to redirect http only for certain users based on the response received from the RADIUS (accept/decline) or according to a RADIUS attribute. For the test I add rule 15 in my control policy-map.

  If I remove 15 rule in the policy-map IPOE_POLICYMAP the session active. But if I use policy-map with 15 rule my BNG send DHCP NAK in response to the user try to re - obtain IP address. Discover/NAK-discover/NAK and so on. Session set up. Where is the problem?

  without rule 15:

  DHCPD PROXY: TP1908: applicant Manager called to CHADRR aaaa.bbbb.cccc with event PACKET

  DHCPD PROXY: TP2483: use server response ID 213.x.x.254 for 213.x.x.211 for CHADRR aaaa.bbbb.cccc yiaddr

  Article 15:

  DHCPD PROXY: TP1908: applicant Manager called to CHADRR 0015.582c.96cb with the DPM_DISCONNECT event

  DHCPD PROXY: TP2805: delete customer called for CHADRR 0015.582c.96cb for reason disconnected Session

  DHCPD PROXY: TP1908: applicant Manager called to CHADRR 0015.582c.96cb with the PACKAGE-DROP event

  (2) can I do "-http redirect" via sent VSA Avpair attributes of BNG in ACCESS-ACCEPT RADIUS? For example I have

  successfully car limit through "sub-qos-policy-in/sub-qos-policy-out". It appears cisco -avpair= "url -redirect=http://...". "does not work with ASR9000.

  (3) why unauthenticated session cool stay after ACCESS_ACCEPT has been received from RADIUS? It is normal for cool?

  I see "sh ipsubscriber session all the detail" and "sh RADIUS.

  -------

  interface Bundle - Ether1.10

  HOMENET description

  IPv4 point-to-point

  IPv4 unnumbered Loopback1

  disable the ARP of learning

  Subscriber control type of service-strategy IPOE_POLICYMAP

  encapsulation dot1q 10

  IPv4 ipsubscriber l2-connected

  initiator dhcp

  Subscriber control type class-map correspondence-everything DHCP_INIT

  match Protocol dhcpv4

  end-class-map

  Subscriber control policy-map type IPOE_POLICYMAP

  starting a match-all event session

  class type control subscriber DHCP_INIT - until the failure

  5 allow aaa list default format SUB_AUTH password cisco

  10 activate dynamic-model IBSUB_TEMPLATE

  15 enable dynamic-model IPSUB_UNAUTH_TEMPLATE<-->

  dynamic model

  !

  type ipsubscriber IBSUB_TEMPLATE

  IPv4 unnumbered Loopback1

  way of 100 IPv4 access-group

  group-access 100 IPv4 output

  !

  type ipsubscriber IPSUB_UNAUTH_TEMPLATE

  type of service-strategy CPR l4_redirect

  Policy-map type ACB l4_redirect

  traffic of type class IPSUB_PERMIT_CLASS

  transmit

  !

  traffic of type class HTTP_TRAF_REDIRECT_CLASS

  redirect http- http://113.x.x.5

  !

  class type default traffic class

  drop

  !

  end-policy-map

  type of traffic IPSUB_PERMIT_CLASS all match class-map

  group-access ipv4 110 match

  end-class-map

  !

  type of class-card traffic of correspondence HTTP_TRAF_REDIRECT_CLASS

  group-access ipv4 120 game

  end-class-map

  IPv4-access list 100

  10 allow icmp a whole

  allow 20 udp a whole

  30 permit tcp any 113.x.x.0/24 eq www

  allow 40 113.x.x.0/24 eq www a tcp

  100 deny ipv4 a

  !

  IPv4-access list 110

  10 allow icmp a whole

  allow 20 udp a whole

  30 permit tcp any 113.x.x.0/24 eq www

  100 deny ipv4 a

  !

  IPv4-access list 120

  30 permit tcp any any eq www

  100 deny ipv4 a

  ---

  Concerning

  Oleg, another pointer, the first thing you should see, is if the ACB is actually applied to your session, like this:

  RP/0/RSP0 / CPU0:BNG #show policy-map type int ACB all

  Mon Oct 7 23:54:19.361 UTC

  node0_0_CPU0: (null): the service policy is not installed

  node0_RSP0_CPU0:

  Bundle - Ether100.540.ip395 entry: HTTPRDRT_PBR

  Policy name: HTTPRDRT_PBR

  Class SRVS_CM

  Classification statistics (packets/bytes) (maybe old 10secs)

  Correspondence: 197/17039

  Statistics transmitted (packets/bytes) (maybe old 10secs)

  Total sent: 197/17039

  Class HTTPRDRT_CM

  Classification statistics (packages)

  Matched             :                   0

  HTTPR statistics (packages)

  Applications received: 0

  Answers: 0

  Redirect drops: 0

  Class class by default

  Classification statistics (packets/bytes) (maybe old 10secs)

  Correspondence: 1/102

  Statistics dropped (packets/bytes) (maybe old 10secs)

  Total has fallen: 1/102

  IF you see this and it still doesn't work, then you need to take a look at your config to redirect, for my tests, I used and the ACLs that allow all traffic tcp/www. I've never denied all traffic, as you do on line 100.

• Windows 7 is installed repeatedly the generic driver does not work on a Realtek hd audio HD official that works.

  I have a Realtek sound card on my ASUS motherboard. It requires a driver to work properly.

  When I install this driver under Windows 7 32 - bit (fully updated - Jul 08,2012), the sound begins to work, until I stopped. but, when I turn the computer back on, Windows has uninstalled this driver, and replaced it with a generic Microsoft Audio driver, which does not work.
  How can I solve this problem?

  User Configuration\Administrative Templates\System\Driver Installation\Code signature of device drivers

  http://www.itechs-systems.com/pages/tipstricks/Disable_Driver_Signing_in_Windows_7.aspx

  You can read here:

  (Windows Vista and later versions) driver signing policy

  Code signing is tangled with DRM, and some content may not play with unsigned drivers.   Your motherboard supplier should have signed drivers for its products, if they are not then I suspect, as another poster has said, that the mobo is not supported for Windows 7.

  John