Internet access for virtual machines in Lab Manager

Similar Questions

• I can't access my Virtual Machine when the internet connection is disabled...

  Hello... I'm newbie here... I don't know if Iam asking stupid

  question or good question... Well I can't access my Virtual Machine

  When the internet connection is off... it is quite common... or

  obnormal... In my area there is a lot of electricity cuts... and

  interruptions of network of regular power 5 hours ago

  cut... and power cuts not notified... So I can't access the internet

  constantly... Is there any solution for this... Thank you

  your valuable suggestions...

  Thank you and best regards,

  Indianmale.

  Just to clarify - you are unable to connect using the default management tools to the servers in your office.

  Have you tried to remote desktop, telnet, ssh, otherwise?

  I'm kind of thinking he's trying to communicate to the world for the validity of a SSL key

• is it possible to access the virtual machine when the network is down...

  Hello. He... IAM wondering is it possible that we can access the virtual machine when the network is down... (Because of power outages or when the fluctuations...) ................?

  Is it possible that I can configure my Virtual Machine...?

  Thank you and best regards...

  Indianmale...

  Hello

  Not really...

  For an environment hosted... If you can access the console of the host, you can always access the console of the virtual machine regardless of the State of the network outside of the console. VMware Workstation, Fusion and server all fall into this category.

  For ESXi/ESX... you need a host outside to access the console of the virtual machine. ESX and ESXi not displayed graphics or VMs of their consoles and management devices. So, you need an external machine that can run the vSphere Client or access to the virtual machine via RDP, VNC according to Guest OS involved or SSH.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• How to access the virtual machines to different physical network?

  Hello

  I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?

  In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.

  Thank you.

  vmjunki wrote:

  You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.

  Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.

  You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.

• Use the diskette of esxi for virtual machines

  Hello
  I would like to set up a lab and I have hp g6 server but just with a single 600 GB sas disk
  is it possible to install esxi on it and also use it as a storage device for virtual machines on?
  I know that I can install esxi on a cool drive but if what I've said, it's possible I prefer to use that
  Thank you very much

  It's true.

• Folder path as a VM property - for virtual machines in a paralytic

  Hello

  I used the new-viproperty of LucD script to create a folder for each virtual computer property in my inventory. It works perfectly well for virtual machines, but not for virtual machines in a paralytic as these do not have a 'record' in powercli property. they report a $null value.

  Would be much appreciated if someone can help me to modify this script so it creates a VM property for the VMS and VMs in a paralytic?

  http://www.lucd.info/2012/05/18/folder-by-path/

  01 02 03 04 05 06 07 08 09 10

  11

  12

  13

  14

  15

  16

  17

  18

  19

  20

  21

  22

  23

  24

  25

  26

  27

  28

  New-VIProperty-Name'BlueFolderPath' -ObjectType 'VirtualMachine'-Value{

      param($vm)

      functionGet-ParentName{

          param($object)

          if($object.Folder){

              $blue= Get-ParentName$object.Folder

              $name= $object.Folder.Name

          }

          elseif($object.Parent -and$object.Parent.GetType().Name -like"Folder*"){

              $blue= Get-ParentName$object.Parent

              $name= $object.Parent.Name

          }

          elseif($object.ParentFolder){

              $blue= Get-ParentName$object.ParentFolder

              $name= $object.ParentFolder.Name

          }

          if("vm","Datacenters"-notcontains$name){

              $blue+ "/"+ $name

          }

          else{

              $blue

          }

      }

      (Get-ParentName$vm).Remove(0,1)

  }-Force| Out-Null

  Check if the new version works for you.

  New-VIProperty-name 'BlueFolderPath' - 'VirtualMachine' - value {ObjectType

  Param ($VM)

  Function Get-ParentName}

  Param ($Object)

  if($Object.) {Folder)

  $blue = get-ParentName $object. Folder

  $name = $object. Folder.Name

  }

  ElseIf($Object.) VApp) {}

  $blue = get-ParentName $object. VApp.ExtensionData.ParentFolder

  $name = $object. VApp.Name

  }

  ElseIf ($object - is [VMware.Vim.ManagedObjectReference]) {}

  $folder = get-VIObjectByVIView - MORef $object

  $blue = get-ParentName $folder. Parent

  $name = $folder. Name

  }

  ElseIf($Object.) Parent - and $object. Parent.GetType (). Name - as a ' file * ') {}

  $blue = get-ParentName $object. Parent

  $name = $object. Parent.Name

  }

  ElseIf($Object.) ParentFolder) {}

  $blue = get-ParentName $object. ParentFolder

  $name = $object. ParentFolder.Name

  }

  If ("vm", "Data centers" - notcontains $name) {}

  $blue + "/" + $name

  }

  else {}

  $blue

  }

  }

  (Get-ParentName $vm). Remove (0.1)

  } - Force | Out-Null

• Wonder average CPU for virtual machines

  I have a supermetric that gives me the average demand of CPU for virtual machines.

  It works as set below:

  avgN($R40:A2055,3) / avg($R40:A2030)

  R40 is the data center - A2055 is the attribute of MHz CPU demand.

  A2030 is powered on virtual machines in the data center.

  Is it possible for me to write this formula without having to divide it by the total number of virtual machines in the data center?

  Is 'average' looks should do.

  

  Fix.

• 1 or 2 processors? 32 or 64 bit? for virtual machines

  I had a discussion with the network administrator about using 2 processors and OS 64-bit for virtual machines.

  It uses 1 proc and 32-bit on Proliant G5 servers for virtual servers ordinary.

  When it will be beneficial to use 2 procs and 64 bit?

  THX.

  Hello.

  When it will be beneficial to use 2 procs and 64 bit?

  It will be useful to use 64-bit when you have an application that you want to run 64 - bit, and it will be useful to add a second processor when you discover that a vCPU is not enough.  If by 'regular' virtual servers, you're talking low-end Windows servers, then the 32-bit single vCPU approach will be generally better.  Without knowing more about your applications or operating systems, it is difficult to give a more precise answer.

  Why do you think that you might need for 64-bit or 2 vCPUs?  Can you elaborate on what you put on foot?

• Have problems connecting to the Internet after the virtual machine has crashed.

  Original title: problems sudden ethernet

  Hello

  I'm having a problem with connecting my computer custom-made. I was with my virtual machine to run an android phone. It connected via a second wireless connection (I don't know much I just let it work). It crashed my computer and when I rebooted I had no internet.

  It would also be useful to mention that I recently had a BSOD because of the virtual Manager and a driver, but I solved it.

  He said that no connection is available, and there is a red cross.

  So far I have tried:

  A second ethernet cable - nothing. (The two wires green on the end of the PC and the end of the router).

  Updated windows, but he can't because of the lack of connection.

  System Restore, but it says "Windows has detected corruption of system files on Local disk (C .)» You should check the drive for errors before you can restore it.

  sfc/scannow, but which translates "could not Windows Resource Protection start the repair service".

  I have also reinstalled the drivers for my cable ethernet twice and nothing.

  If more information is needed please ask. Thanks in advance.

  Hello

  In Device Manager, expand network adapters, right click on the Ethernet device and update the driver.  Otherwise, identify the manufacturer, go to their website and download the latest driver.

• To access the virtual machines via browser

  Hello

  We can access virtual machine running on ESXI 5.0 U1 via Web browser?

  Kind regards

  Vikram Kumar. P

  You'll want to download and install the vSphere Client integration Plugin for your browser (Internet Explorer or Mozilla Firefox).

  More information can be found here:

  VSphere Documentation Centre

  -----------------------------------------

  Don't forget to mark this "correct" answer or 'useful', if you found it useful (you'll also points).

  Kind regards

  Harley stagnate

  VCP3/4, VCAP-DCD4/5, VCDX3/4/5

  Website: http://www.harleystagner.com

  Twitter: hstagner

• Password is now required to access the virtual machines

  I ran Money 98 on my laptop working for the last 2 years (in fact since 1998 on other computers) and from 07/10/2014 when I try to open Money 98 Windows asks for a password. I have not configured this virtual machine, and I do not think that a password has been set up. I really need access to this program, 16 years of financial info desperately needed for the work. Help please.

  Hello

  Would you repost with kindness that your Question in Forum money Microsoft for assistance with money issues:

  https://social.Microsoft.com/forums/en-us/home?Forum=money

  See you soon.

• Unable to connect to the internet with my virtual machine

  Hello

  I use vmware workstation 10 Windows 8, I run the machine virtual windows server 2008 R2. I have configured the apdater network of the virtual machine on the NAT to share the ip address of the host address, but I don't have access to the internet! When I check my network apdater it shows that no network apdater is connected? help please

  you're hard coding of the IP address of the virtual machine or to an address must be assigned by DHCP?

• How to install VMplayer 3 network for virtual machines to comminicate with each other?

  People,

  Hello. I use VMPlayer 3.

  SE host: Windows 7
  Comments to: Windows XP and Oracle Linux 5

  I need to set up the network and activate Windows XP communicate with Oracle Linux 5.

  I followed this tutorial http://www.vmware.com/support/ws5/doc/ws_devices_serial_2vms.html to configure 2 virtual machines in Windows 7 host machine.

  I tried to test 2 virtual machines in the way as below:

  In Linux, [user@localhost ~] $ping WindowsXP_HostName
  Release: Unknown host WindowsXP_HostName

  
  At the Windows XP command prompt:
  C:\ping localhost.localdomain
  Its release: ping localhost 127.0.0.1 with 32 bytes of data...
  Reply from 127.0.0.1: bytes = 32 time = 2ms TTL = 128

  
  He meets a few times and then disconnected by itself. It seems that Windows XP is ping itself and not Linux server. The host name of the Linux server is 'localhost' as well. It is a kind of confusion for me.

  
  From the information above, we can see that 2 VMs cannot connect between them.

  Can any folk provides a tutorial or example or case study to set VMPlayer 3 allowing 2 virtual machines communicate with each other by step?

  Very grateful in advance.

  In the guest machine, all I see is click on VMplayer-> VM-> settings-> network-> Network adapter Connection-> select Bridged: directly connected to the physical network. After that, nothing to keep.

  That's it for the network card in Virtual Machine of its parameters, and the rest is done to each guest at the guest OS level.

  In Windows 7 host machine, I don't see anything first.

  What we need to do is to assign 3 IP addresses to 3 machines: Win 7, Win XP Guest and Linux host.

  Why the world can't bring you up Google in a browser and type, the ip static windows xp, then static ip rhea of windows 7 and finally static ip.  As I have already said there are more then enough tutorials on the Internet about how to configure a static IP address by a given operating system then I suggest you Google it!  It makes absolutely no sense to write the instructions step by step for you when there are already dozens of tutorials available on the internet.

• Error recover attribute customized for Virtual Machine

  Hello

  I created a custom attribute TestAtt for the virtual machines by using the vSphere client. The screenshot of the configuration is attached.

  Now, I need to retrieve this value programmatically in my plugin, I'm developing using c#. Here is the snippet of the same thing. For some reason any below appeal fails by saying that the attribute is not found. Even when I used the DoesCustomizationSpecExists, I'm wrong. I am not getting any exception.

  I'm doing this in the right way?

  CustomProperty CustomizationSpecItem = new CustomizationSpecItem();

  customProperty = VIM_SERVICE. GetCustomizationSpec (SERVICE_CONTENT.customizationSpecManager, "TestAtt");

  Kind regards

  Sudhir

  

  You use the bad managed object to retrieve the custom fields. The customizationManager is used to deal with the customization of the guestOS using Linux quick Prep or Windows Sysprep.

  You want to use is customFieldManager - this is a vSphere SDK for Perl script that shows you how - addVMCustomField.pl

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• User access to virtual machines

  I have a VMware ESXi hosting VMs used by different users.

  Access life VMs users Remote Desktop.

  I need to allow users to access the console in order to create snapshots and return to clichés, but I don't want them to change the VM settings or get new virtual machines: is there a directive to set up users with limited user rights?

  Concerning

  Marius

  You have the right tool: VI Client 2.5.

  If you have not a vCenter server connect to the ESX host, if you have a vCenter server connect to this one.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =