Domain not created using unpack

Similar Questions

• I want to download a Muse Site, I did not create, using Muse. How can I do this?

  I want to download a Muse Site, I did not create, using Muse. How can I do this?

  Thank you.

  Hello

  You need get the file .muse for this site. Once you have the .muse file, you can open in your computer or any computer using the Muse and edit.

  Kind regards

  Aish

• Not created using AI PMS colors

  1. I had a designer to create a logo with I. I sent the source file of the logo on a printer to use for business cards and stationery. I learned that the colors of the logo cannot be exactly replicated for more information on maps and fixed, because they weren't the PMS colors. It's hard for me to believe because there the source file and the software HERE. I need to find a better printer or is it correct? Thank you

  Yes.  By selecting items in the logo itself and get a reading in the color palette.

• Qosmio G35-AV600: using Recovery CD I get partition not created error

  I recently ordered a recovery for my Qosmio G35-AV600 disc, because I started in safe mode to clear an alleged threat. Silly me! I forgot the password because I constantly use the fingerprint reader. Well, at the time where, that drives recovery came, I had remembered a password and access I.

  The thing is I always want to format the laptop, but I get partition not created not errors. Is it because the laptop hard drive has SATA or RAID capabilities, or because of the so-called Qosmio player. * If I could format the hard drive, I would not be able to use the laptop Qosmio mode? *

  I searched here and even contacted the customer service and have not found a definitive answer. Customer support's solution was to send to an authorized repair shop. My experience with computer repair shops, is that if the problem is not hardware related, they simply reformat the disks. I could do it myself if I could get help with this "partition has not created" or the partition not deleted"errors.

  Hello

  I agree with you and I also think that this has nothing to do with the hardware failure.
  But who knows, if you started the operating system in safe mode then we shouldn't exclude the hardware problem (IE. HARD DRIVE).

  However, the restore CD contains already all the drivers and you n t need to install SATA or RAID drivers.

  In my opinion, there are bad RAID settings in the BIOS!
  Please check the settings in the BIOS on the third page.

  If you know n t that mean simple settings, you open the user manual and check RAID chapter in the user manual.

  In addition, this could be useful:
  http://support.toshiba-tro.de/KB0/TSB6901K60006R01.htm

• update the apps created from an old email address that is not in use most

  created from an old email address that is not in use most

  I am currently updating the purchased applications that were created when I got an e-mail and password. I have more access to this email address, nor I remember the old password. Any ideas? Thank you. Penny

  Then you will not be able to update this app.

  Either don't update or delete the app and install it with your existing apple ID.  Data may be lost in doing so.

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• When I create the domain user, I used option user must change when you first connect, but am unble to get this

  When I create the domain user, I used option user must change at the first logon, but am unble to get it.

  Hi RadhamAravind,

  Thanks for posting in the Microsoft Community.

  As you create a domain user, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

• 'Registered user' promotions do not appear if the account is created using the dyn/admin interface

  Hello

  If the account is created using 'Personalization Administration' in dyn/admin then promotions such as 15% off home accents are not available to the user of this type to "promo/promotions.jsp.

  This account is not considered "registered user" in promotion.

  Any ideas how to fix such profiles?

  Hi Pavel,

  GrantPromotions scenario gives a promotion to a newly registered user, when the anonymous user visits the site and registers on the site. He listens to atg.dps.Register DMS Message and adds that promotion of the activePromotions of the user profile property. Method of postCreateUser() of ProfileFormHandler will trigger this event of registry.

  It seems that the ATG will not send this event of registry message when the profile is created from dyn/admin.

  Reference: https://docs.oracle.com/cd/E24152_01/Platform.10-1/ATGPersProgGuide/html/s1912registerevent01.html

  https://docs.Oracle.com/CD/E24152_01/CRS.10-1/ATGCRSOverview/HTML/s0407scenariosthatgrantpromotions01.html

  Thank you

  REDA

• Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

  Seeking help with a problem with the LR

  
  

  I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

  "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
  . (1).
  .....

  I tried to increase the size of the file several times,

  I left LR

  I restarted the computer.

  
  

  Any help or advice for this problem will be greatly appreciated

  
  

  Thanks in advance

  
  

  @stu

  Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

  Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

  Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.

• When not to use templates for creating menus

  I used my own transitions of scenes is not using a predefined template.  Now I want to make a scene select Menu (manually, I guess), but do not know how someone can help me, please?

  Custom Menu sets (Note: pre uses sets of Menu w / a main Menu and a scene selection Menu, and there are several necessary conventions, file names for the page layout, which MUST be followed, because of pre made much of the semi-automatic creation), and it is almost always better to start with your Menu included and then adjust that in PS , or PSElements, in accordance with the exact agreements in the model. Note: PES cannot create layer sets, so you can't create buttons, but can make some copy/paste work. The full Photoshop has without such limitations.

  Whenever I need to create Menu pre sets, I have either begins with a model, or will have at least one open, to make sure that I don't forget any of the necessary conventions.

  For some information about Menu pre sets, this ARTICLE could be useful.

  For additional discussion, this ARTICLE on Motion / Audio in Menus, might be useful.

  Steve Grisetti goes into details on Menu pre sets in his books of pre & PSE.

  http://Muvipix.com/pe10.php

  Good luck

  Hunt

• I want to create a model so that I can change the text using MS word, then merge with my form that I must not create fields every time I have an amendment to a document

  I have a complex form of semi involving 30 or text fields, a few drop-down lists, radio buttons. I have Acrobat Pro and MS word (2011).  I create the source with MS Word, then saving them as PDF.  I then open Acrobat Pro and create using the PDF file saved.  Problem is that whenever I have make a change to the source and save as PDF I have to start over the process of "creating" and add all text fields, drop-down menus, radio buttons, etc.  Is it possible to merge or to build a model that covers the Acrobat Pro established fields on my PDF evolving?

  by opening the original form using Acrobat Pro.  By using the function 'replace' in the pages, you can remove the old source and replace it with a new one.  Save the file, and then close.  Reopen the case and chose to create.  You can then change the fields if move you the source.  Kludgy, but it worked.

• I forgot my password of connection for windows 7 for my toshiba laptop and did not create a reset disk. How can I recover the password or make a new one?

  I forgot my password login for windows7 and I have not created a password reset disk. How can I get a new password?

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

  Maintaining secure passwords - Microsoft strategy on getting around passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password

  If you have forgotten your Windows password and you are on a domain, you must contact your system administrator to reset your password. If you are on a working group (the majority of individuals are on a working group), you can reset your password by using a reset disk of password or by using an administrator account.

  Create a password reset disk:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-password-reset-disk

  Reset your Windows password:
  http://Windows.Microsoft.com/en-us/Windows7/reset-your-Windows-password

  If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.

  What to do if you forget your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Solutions to common problems with logging on Windows:

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Recently changed the password? Use the system restore and restore point from before it was modified:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Change your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-Windows-password

• Journal has not created

  Hello

  I have a file of installation command:

  @rem *************************************************************************
  @rem This script is used for the installation of WebLogic Server as a Windows Service.
  @rem
  @rem to create your own script start for your domain, just put the
  name of the @rem to your server SERVER_NAME variable, then call this script from your
  @rem directory of the domain.
  @rem
  @rem This script sets the following variables before installing
  @rem WebLogic Server as a Windows Service:
  @rem
  @rem WL_HOME - the root directory of your WebLogic installation
  @rem JAVA_HOME - location of the version of Java used to start WebLogic
  @rem server. This variable should point to the root of a directory
  installation of JDK @rem and will be set by the installer for you.
  @rem, see Oracle Fusion Middleware System Configurations supported
  @rem (http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html)
  @rem for an updated list of virtual machines supported taken Java.
  @rem PATH - adds the JDK and directories WebLogic to the system path.
  @rem CLASSPATH - adds the JDK and WebLogic jars to the classpath.
  @rem
  @rem other variables that takes of the installSvc are:
  @rem
  @rem WLS_USER - username admin for starting the server
  @rem WLS_PW - password in clear text to the server startup
  @rem ADMIN_URL - if this variable is set, the server has started will be a
  @rem managed server and will turn to the url (i.e.
  @rem                http://localhost:7001 ) as the server admin.
  @rem PRODUCTION_MODE - true for servers in production mode, false for
  @rem development
  @rem JAVA_OPTIONS - Java command line options for the server. (These
  @rem will be marked at the end of the JAVA_VM and MEM_ARGS)
  JAVA_VM - java arg @rem specifying the virtual machine to run.  (i.e. - Server)
  @rem-client, etc.)
  @rem MEM_ARGS - variable to override the standard memory arguments
  @rem to java
  @rem
  @rem
  @rem MAX_CONNECT_RETRIES - number of attempts to make the Windows Service will check
  @rem if you start the Weblogic Server. If this variable
  @rem is specified with the HOST and PORT, the Windows Service will be
  @rem wait for the Weblogic Server is started.
  @rem HOST - the IP address of the Weblogic Server
  @rem PORT - where the WebLogic Server is listening to Port number requests
  @rem
  jDriver for Oracle users @rem: this script assumes that native libraries
  @rem required for jDriver for Oracle have been installed in the right
  @rem location and that your system path variable has been set correctly.
  @rem
  @rem for more information, see "Managing Server Startup and Shutdown for Oracle WebLogic Server"
  @rem (@DOCSWEBROOT/START/overview.htm).
  @rem *************************************************************************

  off @echo
  SETLOCAL

  @rem check if SERVER_NAME is defined
  : check_server_name
  If not set (SERVER_NAME
  @echo you need set before SERVER_NAME
  @echo installation of WebLogic Server as a Windows Service
  output/b 1
  )

  @rem check if DOMAIN_NAME is set
  : check_domain_name
  If not set (domain_name
  @echo you need set before domain_name
  @echo installation of WebLogic Server as a Windows Service
  output/b 1
  )

  @rem check if USERDOMAIN_NAME is set to
  : check_userdomain_home
  If not set (USERDOMAIN_HOME)
  @echo you must set before USERDOMAIN_HOME
  @echo installation of WebLogic Server as a Windows Service
  output/b 1
  )

  @rem check if SERVICE_DESCRIPTION has the value
  : check_server_name
  If not set (SERVICE_DESCRIPTION)
  Set SERVICE_DESCRIPTION = "WebLogicServer.
  )

  
  Set WL_HOME = C:\Oracle\Middleware\Oracle_Home\wlserver
  Call "% WL_HOME%\common\bin\commEnv.cmd".

  @rem check that the WebLogic classes are where we expect they are
  : checkWLS
  If exist checkJava goto '% WL_HOME%\server\lib\weblogic.jar '.
  ECHO the WebLogic Server not found in the directory % WL_HOME%\server.
  ECHO Please edit your script so that the variable WL_HOME points
  echo to the WebLogic installation directory.
  end goto

  @rem check that java is where we expect it to be
  : checkJava
  If exist runWebLogic goto '% JAVA_HOME%\bin\java.exe '.
  echo the JDK was found in the directory % JAVA_HOME %.
  ECHO Please edit your script so that the variable JAVA_HOME
  echo points to the location of your JDK.
  end goto

  : runWebLogic

  @rem the service load dll file, so the JAVA_VM * must * be correct
  If exist (%JRE_HOME%\bin\client)
  Set JAVA_VM =-customer
  ) ElseIf exist (%JRE_HOME%\bin\server)
  Set JAVA_VM =-Server
  ) ElseIf exist (%JRE_HOME%\bin\jrockit)
  Set JAVA_VM =-jrockit
  )

  : noResetJavaVM
  If not "MEM_ARGS %" == "" goto noResetMemArgs
  MEM_ARGS =-Xms32m-Xmx200m set

  : noResetMemArgs

  @echo we

  set the classpath = % WEBLOGIC_CLASSPATH %; CLASSPATH %

  @echo ***************************************************
  @echo * to start WebLogic Server, use the password *.
  @echo * assigned the user to the system.  The system *.
  @echo * username and password must also be used for *.
  @echo * access the WebLogic Server console from a web *.
  @echo * browser.                                       *
  @echo ***************************************************

  REM * define the command-line for the service runs in created FMV

  off @echo

  If "% ADMIN_URL" == "" goto runAdmin
  @echo we
  CMDLINE = value "%%%d MEM_ARGS JAVA_VM % JAVA_OPTIONS %-classpath \"%CLASSPATH%\ " »-Dweblogic.name=%server_name%-Dweblogic.Management.username=%WLS_USER% - Dweblogic.management.server=\"%ADMIN_URL%\ '- Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE%-Dweblogic. Stdout=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stdout.log

  -Dweblogic.stderr=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stderr.log

  -Djava.Security.policy=\"%WL_HOME%\server\lib\weblogic.Policy\"weblogic. Server '.
  end goto

  : runAdmin
  @echo we
  CMDLINE value = "% JAVA_VM % MEM_ARGS % JAVA_OPTIONS %-classpath \"%CLASSPATH%\ " ' - Dweblogic.Name=%SERVER_NAME%-Dweblogic.management.username=%WLS_USER%-Dweblogic. ProductionModeEnabled = % PRODUCTION_MODE % Dweblogic. Stdout=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stdoutA.log

  -Dweblogic.stderr=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stderrA.log

  -Djava.Security.policy=\"%WL_HOME%\server\lib\weblogic.Policy\"weblogic. Server '.

  : complete
  REM * implemented extrapath for win32 and win64 platform separately
  Set WLSVC_EXE_TO_USE = wlsvcx64
  If '% WL_USE_X86DLL' is 'true')
  Set EXTRAPATH=%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\32\oci920_8
  Set WLSVC_EXE_TO_USE = wlsvc
  )

  If '% WL_USE_IA64DLL' is 'true')
  Set EXTRAPATH=%WL_HOME%\server\native\win\64\;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\64\oci920_8
  Set WLSVC_EXE_TO_USE = wlsvc64
  )

  If '% WL_USE_AMD64DLL' is 'true')
  Set EXTRAPATH=%WL_HOME%\server\native\win\x64\;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\x64\oci920_8
  Set WLSVC_EXE_TO_USE = wlsvcx64
  )

  REM * install service
  '% WL_HOME%\server\bin\%WLSVC_EXE_TO_USE%' - install - ServiceName: 'wlsvc domain_name % _ % SERVER_NAME %' - delay: 120000 - svcdescription: '% SERVICE_DESCRIPTION' - javahome: 'JAVA_HOME %' - execdir: '% USERDOMAIN_HOME' - maxconnectretries: '% MAX_CONNECT_RETRIES' - host: "%" HOST - port: '%port%' - extrapath: "% EXTRAPATH" - password: "% WLS_PW" - cmdline: CMDLINE %

  ENDLOCAL

  ======================================================================================================================================================

  Then I run the service with the command of the launcher file, but the journal of stdou.log and stderr.log files are not created...

  echo off

  SETLOCAL

  Set DomainName = base_domain

  Set USERDOMAIN_HOME = C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain

  Define SERVER_NAME = SOPSECURITY1

  Set PRODUCTION_MODE = true

  Set JAVA_OPTIONS=-Dweblogic.Stdout="c:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stdout.txt»-Dweblogic.Stderr="c:\Oracle\Middleware\Oracle Home\user_projects\domains\base_domain\stderr.txt.

  set ADMIN_URL = https://AdminServer:7002

  MEM_ARGS =-Xms40m-Xmx250m set

  call "C:\Oracle\Middleware\Oracle_Home\wlserver\server\bin\installSvc.cmd".

  ENDLOCAL

  Any idea?

  Thank you

  DOM
  ======================================================================================================================================================

  Path includes the space:-Dweblogic. Stderr = "c:\Oracle\Middleware\Oracle Home\user_projects\domains\base_domain\stderr.txt"

• SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

  Design:

  2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

  2 x fresh install of the SRM VMs version 5.5

  20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

  Question:

  Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

  I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

  Errors:

  (attached file viclient-3 - 000.log)

  The request has been aborted: could not create SSL/TLS secure channel.

  (attached file viclient-3 - 000.log)

  The remote server returned an error: (503) server unavailable

  I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

  I need help to debug this further.

  Thank you

  ************

  < < Updated > >

  Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

  But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

  I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

  Maybe it's a clue to the root cause of...

  Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

  Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

  attached files

• My site, created using Dreamweaver cs6 shows only partial images. He worked until a few days ago when I updated Java and Firefox.

  My site, created using Dreamweaver cs6 shows only partial images.
  He worked until a few days ago when I updated Java and Firefox.
  The URL is j - f - a.com.au

  The images are not entirely loading or do you have other problems?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  I noticed that some images show at the right end of the window and have set width: auto (right: 0px; width: auto) set the width according to the dimensions of the image (i.e. maintain proportions) and others fill the width full page.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes