Domestic network file share is slow

Similar Questions

• I can't get the XP computer recognize the Windows 7 network file share more wireless

  Problem file/network sharing wireless with a professional system XP and Windows 7

  I have 2 computers - 1 with XP and Windows 7 pro upgrade and use a secure wireless network...  I have set up my network on the new computer and can see the files on my new XP computer, but I can't get the XP computer to recognize Windows 7 one.  What should I do?

  Hi Captive,

  
  Method 1:

  I suggest you to check if temporarily uninstall the antivirus software on the computer Windows XP allows you to connect properly.

  But don't forget to install the software after troubleshooting is done such that your computer will be at risk.

  Method 2:
  You can also check the settings of firewall on the windows XP computer. You can check if the ports are opened correctly for the network to connect. See the help link - below
  http://support.Microsoft.com/kb/283673

  Method 3:
  If the problem persists, you can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Question on visibility network file share

  Hello

  I recently took a project to rework our file sharing server. I created the permissions by group and assigned to users, and everything is functional. However, there are some users I want to limit access to only a few specific folders in the root share files. Currently, it works, but the rest of the files are still visible to them. Is there a way I can set it up so that they can see that they can access folders?

  Thanks is advance for the help!

  I thought about it. Some of our actions of root had no active ABE (didn't know what who was until a few moments ago). Now everything works fine.

• Trying to file share two computers that are running Windows XP, but every time I go into the network working group, that it says access denied.

  original title: HELP!

  Trying to file share two computers runing xp but whenever I go to enter the network working group, that it says access denied

  http://helpdeskgeek.com/Networking/connect-two-computers/

• I have problems with network file sharing on 3 Windows XP computers.

  I created a network of small business between 3 workstations.  The last 2 set up on the network can communicate and share files between them, but cannot connect to the 1st workstation set up on the network to share files.  connect to 2nd & 3rd ws 1 ws.  a ping to the 1st ws is OK.  followed all the instructions for sharing and folder permissions.  is there any security on ws 1 problem that I forgot?

  original title: shared folders

  Hello

  Follow the steps in troubleshooting these items:

  How to troubleshoot a network home in Windows XP

  How to use Simple file sharing to share files in Windows XP

  See also:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

• VMware Fusion keeps resetting my network file

  I'm trying to set up a Windows Server VM and allow access to external computers through RDP/DRC. To enable port forwarding, I added the following text to the end of my "/ Library/Preferences/VMWare Fusion/network" file (addresses changed because I'm paranoid that way):

  [incomingtcp]

  # Port forwarding for incoming RDP requests

  3389 = 172.16.252.10:3389

  [incomingudp]

  # Port forwarding for incoming RDP requests

  3389 = 172.16.252.10:3389

  The problem is that every time I restart VMWare Fusion, my network file returns to its previous state, and my updated the file is stored in networking.bak.0.

  Am I missing something here?

  If it helps: I'm under VMWaare Fusion 7.1.2. Network of my VM is set to NAT (alias "share with my MAC"). My virtual computer is configured with a static IP, the same, I added in the network file. I tested DRC between host and the VM and it works fine, I just need to enable access by other computers on the same network.

  Thanks in advance to anyone reading and/or responding to this.

  I know it's lame to answer my own question, but I just realized what was wrong. Apparently, I got some wrong information about the Internet, and I should have added the text in the file nat.conf instead of the network file.

• CS6 PC saving .eps files is painfully slow

  Hi - I work in Illustrator CS6 on a PC and find the .eps files is very slow.

  • I don't have the option to save as .ai file, my company is demanding that save us as .eps
  • It's okay if it's a new file or I save changes to an existing file, it is still slow
  • No matter if I save in our network or my office file, it is still slow
  • I use Extensis Suitcase Fusion 3 although it is generally not open. I read that this can significantly slow down the process. I have no control over the fact that I use version 3 the most recent vs - I use that gives me my business. If someone out there has had this experience and found it better with the latest version of suitcase (6, I think?) please let me know.
  • Extensis Suitcase Fusion is the problem, that someone can recommend a program of font management that works best with Adobe products and will mitigate this slow? If I can show a valid reason for the purchase of different font management software, I may be able to convince management to switch to a different software with our next update.

  Thank you to all those who respond-

  Leslie

  The Extensis software on your machine is now 3 versions obsolete and probably has something to do with your problem. Try to leave, go into the Plugins folder in the Presets folder application and move the plugin Extensis on the desktop. HAVE to reboot and see if that helps.

• Using ESXi for file shares

  Hi all

  OS: Windows 2003 STD 32-bit

  Currently our DC FSMO is also a file server with many shares and printers that are running on a DELL PE2650

  We bought a Dell PowerEdge 2950, 8 GB of RAM, 1.5 to RAID5 to move the FSMO domain controller, but the upgrade of the OS has not been approved, given that Windows 2003 STD may not use more than 4 GB of RAM, we divide the 2 Server 1 server just for the DC, DNS, and WINS and 1 server host the file share and can accommodate 2 servers on the Dell PE2950 ESXi

  question 1 and our main concern: ESXi is suitable for file sharing host 200 users have mapped drives and running applications from?

  2 given that the Dell PE2950 2 NIC can we dedicate a NIC to server file sharing?

  TIA

  1: Yes, it's not a problem.

  2: Yes, you will need to create a vSwich separate the file with separate uplink NIC server and use the second NETWORK card on a second vSwitch for management and other virtual machines.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• iCloud library is not available if the system library is located on a network file server

  I moved my library on an external hard drive, that drive is directly connected to my router via the USB port.

  I can make pictures to my library of photos and pictures of charge very well. I've set the library to serve the library system:

  

  But, by selecting the option of using iCloud library gives me this error message "iCloud library is not available if the system library is located on a network file server.":

  

  I have the ability to connect this external hard drive to an iMac which is used as a server, I just prefer not, but if it's the only option I want.

  So in short, can I use this configuration? If so, why the error message and how to cope.

  Thanks in advance to all.

  That's right - the library needs (for iCLoud, use of the library and for the safe operation) to be on a local wired connection - may not be on a network connection

  LN

• Google Chrome diverted file/share/Email this Page in Safari 9.0.1

  This is OS X El Capitan version 10.11.1 on a late 2009 iMac.

  The problem is that it has become impossible for Safari 9.0.1 to 'share' a Web page by emailing via Apple Mail (9.1). When 'file' / ' share ' / "send this Page" is enabled in Safari, Google Chrome launches and opens a webmail account. Until then, when "file" / "share" / "send this Page" has been selected in Safari, Apple Mail would activate.

  Google seems to be the co-optation "Mail" extension, because navigate to menu Apple/System Preferences/Extensions/action Menu brings up a list of extensions that can be enabled or disabled. The extension called "E-mail" is displayed, but it cannot be selected or deselected; It is dimmed and monitored; and scaling "Mail" icon is the icon of Google Chrome.

  If the extension of "Mail" unalterable interferes with Apple Mail 9.1?

  Mail is selected as "Default mail software"?

  Mail > Preferences > General > default email reader:

  

  https://support.Apple.com/en-us/HT201607

• Warning message to turn off "Are you sure that you want to copy this file/folder without its properties" message during the transfer of files and folders on network file servers? »

  Original title: Annoying message of loss of property

  Win7pro x 64 here.

  Is there a way to disable this annoying message "Are you sure you want to copy this file/folder without its properties" during the transfer of files and folders in all of network file servers?

  Pokermon salvation,

  It would be better if post you this question in the forum category below where this problem is related to Windows server 2003.

  Windows Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  If all goes well, they will be able to solve this problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• network file host etc.

  I would like to know how to configure a host on a network file

  Sharing the C:\Windows\System32\drivers\etc\host file is for me a permission problem. I edited the permissions does not.

  create a shortcut of the file sharing host and it bypasses security but when editing it on a network is a no NO major the only thing you are editing is your own host file without even knowing.

  The scenario why I want to manually edit on a network

  I edited a number of host files that facebook is no longer available on the network, but must be available for a single person (on request)

  by sharing the host file from a pc on the network gives me access to add or remove 127.0.0.1 www.facebook.com for the host file.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows 7; Windows firewall prevents the discovery network, files and printers, sharing, public folder sharing and streaming media

  Windows Home Premium SP1, completely up to date.  Windows Firewall is enabled.

  Try to keep the file sharing and printers on a home network.  Try changing the settings on the control panel; All Control Panel items: Center network and sharing; Advanced sharing settings.

  When I try to change the option buttons for sharing, then click on save changes at the bottom of the page, the screen jumps to the network and sharing Center.  Object entering the settings advanced, no parameters have been recorded.   The comoputer restarting does not help.  I checked that the following services are running and set to automatic according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4bff-4dd3-acec-ffc3524d44a4;

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall

  When I stop the Windows Firewall service, I can activate the sharing I want.  Of course the windows firewall prevents sharing I would do on my network.

  I'm uncomfortable with Miss having a firewall work on my computer.  How to configure my Win 7 machine windows firewall to allow communications with my homegroup?  I tried to restore the default values.  This did not allow the communication.  I tried to find the homegroup settings in the advanced settings of the windows firewall.  No luck there.

  What should I do to configure my windows firewall to allow network discovery and file sharing of printers and media streaming and sharing?

  Hi stephanie,.

  Thanks for joining us out on Microsoft Community Forums.

  Looks like the Windows firewall prevents the discovery network, files and printers, sharing, public sharing of files and streaming media. We will analyze and identify the cause of the problem.

  You have a third-party antivirus installed on the computer program?

  Method 1:

  To turn on network discovery
  
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  The article below explains all about the network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  If any of these responses not solve the issue, let us then run the sfc scan and check if any file system is corrupt. I also recommend to perform a clean boot in order to find the root cause of the problem.

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  See also:

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/open-a-port-in-Windows-Firewall

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Hope this information helps. Get back to us if you have more queries about Windows.

• SBS 2011 and Windows 2008 file share

  I have a sbs 2011 and a regular Server 2008 domain. I need to set up a file share that can see both areas. I discovered what a normal two-way transitive trust between them is a bad idea. Wanting to know if there is a better way to do it by side just setting up user accounts in the regular field of 2008 (where the share resides) which corresponds to the account of sbs domain, setting up the collective right to the share, and map the drive to the sbs domain workstations. I don't like this method because changing a password on the sbs domain would require a manual modification to synchronize on the regular field.

  Hi Mialbert,

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet (Small Business Server) Forum

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

   

  Hope this information helps.

• Synchronization of blackBerry Smartphones Medis "network file not found."

  Impossible to find a solution for the following.

  Media files are stored on a NAS drive and mapped Drive 'R' on the PC

  Organizing media is iTunes (Win), perfectly handle all files, playlists etc.

  The sync to BlackBerry Desktop M (6.x) media together as "itunes."

  First time, it worked perfectly, files moved to Blackberry as a whole. Later, once, Director of office deleted all files and since on the media manager tab is a status message after each music file "network file not found."

  Win7 64

  Any suggestion?

  Thank you

  seems the version number. moved to build021 (6.0.1.x) and it works perfectly again