Domestic network setting issue

Similar Questions

• Which network setting is better and safer. private or public?

  original title: network settimg

  which network setting is better and safer. private or public?

  HI Margaret,.

  You can read the following article to learn more.

  Choose a network location

  See also:

  Setting up a network home

  Setting up a wireless network

• Operation error 0 x 00000709 might not be compled, check the name of the printer and make sure printer connect to network - set the default printer

  PRINTER IS SHARED ON THE NETWORK AND YOU WANT TO SET AS THE DEFAULT PRINTER...

  My Hp Deskjet 3550 Printer I have server with Windows 7 32-bit, 64-bit client

  I was first installed the printer in my client and work and shared what this wireless client PC...

  more later connected (shifted) this printer to the server and shared and want to access the client, now client pc has two settings of the printer, 1 direct connect 1 network share and I want to set default network setting... but displays error 0 x 00000709 as above. (successful print test)

  Print network image printer is displayed,

  but print the word, excel, pdf just placed directly the visible with fax and xps viewer.

  -default even impossible to define to the xps Viewer or by fax.

  Please suggest me the way out?

  Hi Amit,

  I suggest you to send your request in the TechNet Forums to improve assistance in this regard. Here is the link: http://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro&filter=alltypes&sort=lastpostdesc

  It will be useful.

• Wath is real network setting for webscan with crossover cable?

  Hello everyone

  I have a problem with webscan.

  I have two desktop who are networked with a "crossover" cable one of these computers have two network port I connect my hp 6500 all-in-on with another "crossover cable" to a different port on this computer network.

  my setup ip in computer "1" with the port of two networks:

  192.168.0.1 ===> to connect to another computer

  169.254.199.1 ===> to connect to hp 6500

  my setting ip to the '2' with a single port network computer:

  192.168.0.2

  my hp 6500 ip setting:

  169.254.199.140

  computer 1 can find computer 2 and hp 6500. and 2 computer will find computer 1 but the problem here is that 'the computer '2' is not hp 6500 ".

  Help, please.

  If we don't want my network setting, that is - that's right.

  Note: both my os is windows xp.

  I apologize for my bad English.

  Have you tried to manually configure the IP 192.168.0.3 printer?

  You must also put the printer subnet mask to 255.255.255.0

  Which should allow the computer 1 routes IP printer to computer 2 packets (as computer 1 is turned on and the computer 1 provides routing between ethernet ports).

  It's worth a try.

• Why the window asking if I want to make my new network domestic or public when I already a network set up. My original network now has a 2 square brackets also.

  I left my computer for my magic jack so I can receive calls.   When I woke in the morning, there were two open windows.   One was the new network

  window and the other was the window asking if I wanted to do a home network or public.   Does that mean someone hacked my computer?

  The fact that my network connection now has a (2) beside it means I have now two netowrk connections runinning.

  The system seems much slower and takes about 10 seconds to respond to the movements of the mouse if it has been sitting for awhile.

  Help, please

  Computer illiterate fool

  2 hooks would duplicate and feel safe to remove.

  If this is not the case, of course, run a spyware scan online TrendMicro Housecalls.

  http://housecall.trendmicro.com/

  I would contact Magic Jack support with this issue

  http://www.magicjacksupport.com/

• "the apprentice" crypto transform-set issues

  Greetings - I was sort of a backup person or I guess as "Apprentice" to our network administrator who has recently retired. Same story, guess who is responsible now to figure it all out.
  We have a pair of 5510 in the main office, the second is a "fail-over" the death of number 1.
  Our remote offices have 5505 s (system image file is disk0: / asa844-1 - k8.bin) which connect here on LAN-to-LAN via the Internet connection provided to this office by various Internet service providers. Mostly good, some "tunnels" or connections remain for days, or even weeks or sometimes months without any problem.
  But we have some offices of disorder where each connection fall fairly regularly or in one case, they often lose the ability to connect to the connector of the computer central address here. We have different subnets in our offices, the mainframe and email are provided by the State, or IT Enterprise/ITE Central. Some of our 'networks' uses public addresses, some private.
  Each remote office has its own network. The numbering is based on number of office accountant, not that it's really important.
  Thus each remote office will have a private 10.252.xxx.xxx plan where the first xxx film series is the office number and the last series of xxx is the range assign us, normally broke up with a 27 (255.255.255.224) mask.
  This established, a typical office will be 10.252.24.1 - 30 (10.252.24.0 network)
  I was thrown in the fire and said to our offices in problem to understand. In trying to figure out why things are what they are, I find things which surprise me. Can't put my finger on it, but it just doesn't feel good.
  A topic at a time - I find Cisco documentation that says you can assign a MAXIMUM of 6 transform sets to all that.
  HOWEVER, I find more than 6 in the list, 11 actually. I can't understand why so many and what the heck we even need more than 1 or 2 for anyway. I think it's here because updates to the os on the means of years that things seemed simply by the process of update and I think also that some has been everything simply because things have been tried - to throw in and see if it helps. I hate this.
  I want these cleaned and only the code that is required to be left - and in a way I can understand. And if that helps with our connection issues, great, but if not at least things will be easier to sort through and understand.
  This is the area in question for the purposes of this post-
  Looking at the small part of our config in a typical remote office ASA5505 I'll post below - which belongs or is necessary, and what is foreign and may or must be destroyed or deleted.
  Why 11 lines of transform-set?
  Spoke 6 max? (this quote) > after a set of transformation configuration, you assign it to a card encryption. You can assign up to six sets of the transform to a card encryption.

  ----------------------------------------------------------------------
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac (why this?)
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac.
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac.
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac.
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac.
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac.
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac.
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac.
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac.
  Crypto ipsec ikev1 transform-set ESP-DES-MD5 esp - esp-md5-hmac (10 of them besides the next)
  Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 vpnivrs (kind of sense-vpnivrs is the 'name' and serves...?)
  ivrsmap card crypto 10 corresponds to the address DESENLOG
  crypto ivrsmap 10 card game 209.111.111.666 peers (changed to protect the real address)
  ivrsmap 10 set transform-set vpnivrs ikev1 crypto card
  ivrsmap interface card crypto outside
  Crypto isakmp nat-traversal 30
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10 (why two of these lines of 'political'?)
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800
  IKEv1 crypto policy 65535 (see above - this is number 2 - why two? in what do this?)
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  --------------------------------------------------------

  Some quick stats or tests.

  VRAMSASA1 # show crypto ikev1 his

  IKEv1 SAs:

  ITS enabled: 1
  Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
  Total SA IKE: 1

  1 peer IKE: 209.111.111.666
  Type: L2L role: initiator
  Generate a new key: no State: MM_ACTIVE

  I can provide any additional information can help.
  I have already corrected some problems by turning the NAT - T on offices provided Internet via a DSL modem, that the modem is apparently a NAT - external interfaces on the 5505 device s with DSL have 192.168 addresses and the MODEM has the Internet address where the provided cable modem sites have a direct public address on the external interface.  Something bothered me on these sites - and I was able to understand what and why. This example configuration above mind right now - but I don't know why.

  Just an another public employee trying to make it work properly, having to learn the hard way now...
  I apologize if this isn't the correct area to post.
  Thank you.

  You are welcome.

  Regarding your questions Suites A and B - two Yes.

  DO first - make a backup of your configuration. It is a good idea during changes of any kind. If you have doubts, backs up front and backup after. Do a comparison aside to check your work. (I use ExamDiff make comparison of less prone to human error long text files.)

  When you have preshared keys (which appear as hashes when you perform a simple "show run"), you must use the following (when recording the output of your senior year):

  term pager 0more system:running-config

  The first line will make all output scroll by at the time and the second will print configuration with pre-shared plaintext keys.

• Satellite Pro L300 - wireless network adapter issues

  Hi guys

  Im having problems with the wireless connection, he sees its network but wont connect.issues with access point or adaptor.i tried everything and still no joy.

  im hoping some cheering helps

  Satellite Pro L300

  Win 64

  You can connect your laptop to the router using the LAN cable?

  Try restarting your router. Disconnect password and check if the WIFI connection working.
  Also, check the router and WLAN card settings. Don't forget that both devices use the same WLAN mode.

  

• Satellite L500D wireless network card issues

  Over the last week I had problems with my Realtek wireless adapter... The wireless or the other works for about 30 minutes, a troubleshooting questions or laptop
  cannot locate the adapter wireless at all.

  Whenever I restart the laptop, he returns with one of the following error messages on the network wireless driver

  (1) Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  (2) this device cannot start. (Code 10)

  or other times wireless driver cannot be found at all.

  I tried to uninstall the driver wireless and re - install... updated the BIOS and even a full recovery of the system however nothing seems to work.

  Any ideas?

  Hmmm, I think it might be from hardware, which means that wireless network adapter needs to be replaced, but before that you would get in touch with a local ASP, please set the BIOS to default settings and install the WLan driver from this page:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• domestic network printer print not

  Suddenly, one of the two Brother printers on my home network is not printing. When I send a print job to it, a box will appear in the taskbar after a delay, saying that the document cannot print. If I click on open all printers Active and faxes of this popup, I see the print job stuck there saying print error. I have changed some setting somewhere that caused this problem. One who does not is a multifunction 7820N printer/scanner/copier/fax. The other, my HL-2700CN color laser printer, works very well. They are connected to a Linksys router, and each is on an ethernet cable. They have both worked very well in the past.

  Fix but don't know how. I disconnected the cable and replugged it. Tried printing. Did not work. Went to Microsoft problem, fix it and took the first step and it printed a test print in Wordpad. Then I opened Word and created a test doc and he did print. So it's fixed! Cool

• printer hp officejet pro 8610: new HP Officejet Pro 8610 Plus router network setting locked by admin impossible to reconfigure

  need to change the network settings on officejet pro 8610 more printer but locked by admin settings. Also, I have printed the network configuration page but could not open http://192.168.223.1with browser, connection has expired.  Help, please.

  Hi kimvb,

  Thanks for joining the forum to Support HP for a solution to your problem.

  I understand that you have a HP Officejet Pro 8610 e-all-in-one printer you need to change the network settings on but you can't because it has locked by admin and also, you can not access the Servicer (EWS) Web embedded with the IP address of the printer. I would like to help with that.

  There is a stain on the integrated Web server that you can join the admin settings, but if you are unable to access the built-in Web server with the IP address of the printer there is another way may work around this problem.

  I'll send you a (PM) private Message with reset information that can help. If you are unsure how to check your PMs, click here.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• The network connection issues of comments with EA6300 (Linksys Smart wifi router AC1200)

  I have a friend who runs a Bed and Breakfast, and it is problems with guests to be able to connect to the Guest network.  She bought this router on the recommendation of Best Buy Geek Squad, after that she had a few problems with his predecessor.

  Everything is configured correctly, the router seems to work very well, especially with the normal network.  Network comments can be seen, with a decent amount of signal strength, but when people try and connect to the network and try to use it, they are never invited for comments login screen.

  I was able to verify that it works in fact - I helped set it up, but apparently there are several people who use Android phones and tablets and iPads that do not receive a prompt to enter the password of comments and continue.

  Is there any manual addresses can be entered in a browser to access the web connection screen invited?

  OR even better, is there a way to assign the password to the guest SSID as a normal wireless access point rather than allowing customers to connect to a password-promptless guest SSID and must try to finagle screen comments for pop up password?

  It's very frustrating for both my friend who runs a business and myself who are in favour.  The router is defective?  Y at - it a new firmware?  Any help would be appreciated.

  Hi troybenedict. For Android tablets and phones, there is an option there to forget the network.  Let them do first and connect again.

  In addition, they should asked for the password only when they begin to access Web sites.  They do not have that?

  You can also check the number of comments allowed Guest Access tab. There are limits the number of authorized clients.

• Dial-up error 720 and network card issues

  When I try to connect to my dial-up connection, right after that it says "Register your computer on the network" I get

  Error 720: a connection to the remote computer could not be established.

  I contacted my ISP and the issue appears to be on my end, not their

  Moreover, in my network adapters: you can see the maps marked in yellow in this screenshot

  http://i1178.Photobucket.com/albums/x374/K29000/network_adapters.jpg

  errors:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I don't know if that is related to my problem of remote access. They all seem to be duplicates of NICs are working properly. (Except that they say 'miniport eacfilt' at the end)

  I tried to uninstall these duplicates which I think are the leftovers of other software that I have installed at one time (he said that the seller is Nortel, but I have more no Nortel software on this machine), but they won't disappear.

  I can still connect to the internet fine through a usb 3G modem that I borrowed. Although, when I do gives me a message that "another computer on the network has the same IP as this one" but after the closure of the message, the internet still works fine.

  I could not check if ethernet and wifi services works properly. The last time I used them was a year ago.

  I'm on Vista Business 32-bit SP3. Laptop: Acer Travelmate 5320

  Any help would be greatly appreciated.

  Hello

  I suggest you to follow the link and run Microsoft Fix - it and check if that helps.

  Hardware devices do not work or are not detected in Windows

  I hope this helps.

• Windows Vista network card issues: limited connectivity

  My Compaq Presario laptop apparently has "problems with one or more network adapters. My connection shows only "limited connectivity" with the little yellow triangle. I tried several times to restart, update and turned off my computer so that the re - activate and update network cards. The wireless works fine on all other computers in the House, so I know it's my computer and not the modem. What can I do? I need help as soon as POSSIBLE. Thank you.

  Hello

  1. You have the latest service pack installed for Windows Vista?

  Method 1:

  The issue could be related to corrupt check Windows Socket the link provided below to troubleshoot issues with the nerve to Windows in Windows Vista.

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  Method 2:

  First, disable all other connections to try to force the wireless connection to request the information needed in the router.

  (a) click Start

  (b) Control Panel

  (c) network and sharing Center

  (d) managing network connections.

  (e) click every link that is EXCEPT the wireless LAN connection, and then click on disable this network device.

  (f) then see if your wire will connect.

  (g) you should probably run the diagnostic and repair utility on the Network and Sharing Center menu to force the wireless card to request information from the router IP.

  Method 2:

  If all else fails, go back into the network and sharing Center, manage network connections and right click on the wireless network connection and select Properties.

  Then click Internet version 4 Protocol and select Properties.

  Click in the box that says "Use following IP address" and enter the information that has been shown in IPCONFIG report for your connection to the Wired Local network above.

  Do the same for "use the following DNS servers."

  Make sure that you type the IP address, mask subnet, default gateway, and DNS addresses exactly the same than the connection to the Local network was when he got the information from the router.

  To learn more about how to troubleshoot network connection problems, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  If none of these things work let us know and we will continue to help you.

• more a looping on domestic network (MS loopback adapter)

  I have a question, my home network has a PC using a loopback adapter is required to control the remote server software running locally for people outside the network can connect to the internet and use the server.  Now it works very well on a PC with the closure, I can access the server locally to make changes, as if I were a remote user.

  The router is configured, and the address is static, so people can connect remotely and I can only use one PC as well locally to access the server.  Is here that is the problem I need to have more than one computer on the installation of the LAN to access the remote server software.  When I take another PC on the local network and add a closure to it when I try to connect the other PC running the software server refuses the connection.  I did a PC addressed as 192.168.1.150 looping has the address real IP as it should, the other PC has an address 192.168.1.250 and closure is at the address real IP as well as it should. If the two PCs have their separate address and internal have the same real IP of such 108.X.X.X assigned by the carrier of the ISP.

  Is it possible to have two internal on the same local network to access the same server?    If so, how?

  The server PC is Windows 7 Pro, the other PC on LAN is Windows 8.1

  Hello

  Thanks for posting your query in Microsoft Community.

  The problem you are having is better suited in the Microsoft TechNet forum, we have a dedicated team with advanced tools and permission to help with such issues. I suggest you post the same question in the Microsoft TechNet forum for more help on this issue.

  https://social.technet.Microsoft.com/forums/Windows/en/home?category=w7itpro

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• network conectivity issues

  I started windows7 under "safe mode with network" option and since then I am unable to connect to wifi or play any audio file... the ability to solve the problems of networking does not work... the network icon is not visible and the printers and devices window does not load anything... How do I

  go back to the way it was earlier...

  Hello

  If you're still in Windows 'Safe Mode with networking' 7 Wi - fi drivers and Audio drivers are not loaded by default.

  If you want to use the Internet in Mode safe mode with networking, use an Ethernet cable for the Internet connection.

  In Safe Mode or Safe Mode with networking, very few services are started, because it is a troubleshooting mode that you, not a normal mode of operation

  ________________________________________

  To exit Safe Mode or Safe Mode with network, follow these steps:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon