Domestic service to aid in the diagnosis of network

Similar Questions

• error system 0 x 80300113 for the diagnosis of network

  why I get this error, 0 x 80300113, package ID: diagnostics of the network, the path: windows/diagnosis/system/network, source integration results, the context limited

  Hello

  1. when exactly you get this error message?

  2. what exactly is the problem?

  Please answer these questions and tell us more about the issue. This could help us help you better.

  This error occurs generally when the date and time of the system does not coincide with the actual date and time. Check if your system clock is set according to your time zone.
  Reference: http://windows.microsoft.com/en-US/windows7/Set-the-clock

• My PC is connected to the wireless network, but it is impossible to open any internet page. I went through the diagnosis of Internet Explorer, see below.

  Diagnosis of last run time: 28/01/12 10:16:32 Gateway diagnosis

  Entry door

  Info the following proxy configuration is used by IE: automatically detect settings: enabled Automatic Configuration Script: Proxy Server: Proxy bypass list:

  info could not get the proxy settings via the Proxy Automatic Configuration mechanism

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  repair automatic action: reset the network connection

  action to disable the network card

  activation of the card network action

  successfully activated information network adapter

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  user redirection of information in support of the appeal

  IP layer diagnostic

  Corrupted IP routing table

  prevent the default route is missing or not valid

  Invalid entries in the ARP cache

  action cache ARP has been emptied

  Diagnosis of IP Configuration

  Invalid IP address

  detected info valid IP address: 192.168.0.1

  Wireless diagnosis

  Wireless - Service disabled

  Wireless - user SSID

  required user input action: specify the name of the network or the SSID

  Wireless - first installation

  Info the name of the wireless network (SSID) to which the user wants to connect is IrinaLaptop-router.

  Wireless - Radio

  detected info valid IP address: 192.168.0.1

  Wireless - off limits

  Wireless - hardware problem

  Wireless - Novice user

  Wireless - network Ad - hoc

  Wireless - less preferred

  Wireless - 802. 1 active x

  Wireless - Configuration mismatch

  Wireless - low SNR

  WinSock diagnostic

  WinSock status

  info all base service provider entries are present in the Winsock Catalog.

  channels of information the Winsock Service provider are valid.

  Info entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

  Info entry RSVP UDP Service Provider provider passed the loopback communication test.

  Info entry RSVP TCP Service Provider provider passed the loopback communication test.

  Info connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter

  Network location detection

  Info to help home Internet connection

  Identification of network adapter

  Info network connection: name = connection to the LAN, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN

  Info network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless

  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394

  Info network connection: name = connection high speed, device = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info network connection: name = blank, peripheral = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info both Ethernet connections and wireless available, ask the user for selection

  required user input action: select network connection

  Info Wireless connection selected

  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn HTTP: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn HTTP: error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  WARN FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  WARN FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  error could not make an HTTP connection.

  error could not make an HTTPS connection.

  error could not make an FTP connection.

  I did not want to do this (restore point). However, I found a solution. It comes: http://forums.techguy.org/networking/1029348-network-connection-status-media-disconnected.html

  Where there are two crucial steps (do not know if the two were needed) RUN command (1) netsh int ip reset reset.log and (2) netsh winsock reset catalog
  
  
  After a restart, hey presto my wireless connection was repaired. This seems useful, but not essential (shows wireless performance but not the solution): http://wpc.475a.edgecastcdn.net/0047...etup.1.2.0.exe which is run Xirrus Wi-Fi Inspector 
  Thanks for your time!
  Good bye

• Is it possible to pair my iPhone with my car stereo and my hearing aids at the same time.

  Is it possible to pair my iPhone with my car stereo and tooth blue hearing aids at the same time.

  I've never been able to 2 bluetooth devices at the same time work with the phone

  If it is coupled with my car and then he throws the bluetooth headset and vice versa

  Not sure, there is a way to allow both

• Satellite M70-190 - program for the diagnosis and WLAN

  Toshiba Satellite M70-190.

  What is the program and how it put in place?
  Appears in the bottom right of the screen. Inside there was the diagnosis of the computer, a wireless network...

  Helps to restore?

  Hello

  Can you please tell us what operating system do you use?

  I think you mean that the PC and ConfigFree diagnostic tool. The two you can download on the Toshiba site.
  Check this box!

• Cannot find the 'first aid' in the Keychain Access application

  Hello

  After experiencing a few problems with the keychain (several programs asking for lokal objects access all of a sudden - change the pw days) I browsed the net and found several reference to use "first aid" ind the Keychain Access app.

  Yet, I could be too stupid, that I can't find anywhere in the menu. And I have all the scanned several times

  He has changed lately? Is this a known issue

  Version used:

  OS X 10.11.2.

  Any help much appreciated

  First aid for trousseau has been removed in 10.11.2, because of a "security breach". Working with the support technique apple about this problem, you will essentially have to manually perform certain actions same as first aid carried out, namely synchronize your password. Local release and change the password, what should change for everything the.

• My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?

  My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?

  Several clues:

  1. HARD and SATA drive in the message... On the way SATA HARD drive
  2. Clicking noise, which is an early signal of imminent death for HARD drive (there are only two types of readers... those who died and those who will be)

  I would like to start keep good clones (CarbonCopyClone, bombich.com, $40) for external drives or backups Time Machine.  Any backup of the drive, not just your favorite parts.  Perform backups on a schedule without fail IMHO.

  You can also start to consider a SSD at macsales.com (their mercury collection is highly recommended) or a new HARD disk, at least start planning if the SSD cost is worth the benefit of speed on the HARD drive.  You can buy it later.

  Just my paranoid approach to this situation.

• Can the Format date/timestring service that can control the execution of the loop to a VI?

  Can the Format date/timestring service that can control the execution of the loop to a VI?

  Example,

  a VI is running at August 25, 2010 and print a txtdata(3)) '100825.

  Then follow when time system running at 2359hrs, August 25, 2010 at 0000hrs, August 26, 2010.

  and print a txtdata(3)) '100826.

  How?

  When the system changes a new date, problems occur.

  
  

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager

  Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• Can I make my Vonage phone service and always access the internet through MSN Premium

  Can I make my Vonage phone service and always access the internet through MSN Premium

  Hello

  The question you posted would be better suited to the MSN support. I suggest you to contact MSN support for assistance.

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784
  https://support.MSN.com/contactus.aspx?scrx=1
  http://answers.MSN.com/forums.aspx?ProductID=29

• When you try to add 'fédération Service Active Directory' in the VM, it fails with exception after clicking on the last step of the wizard.

  Log Event Viewer as below.

  *****************************************************************

  Event log:

  Log name: Microsoft-Windows-ServerManager/Operational
  Source: Microsoft-Windows-ServerManager
  Date: 07/03/2012 18:09:06
  Event ID: 1600
  Task category: no
  Level: error
  Keywords:
  User: HDC\Administrator
  Computer: Win2K8HDCRoot.HDC.Com
  Description:
  An error has occurred in the Server Manager. An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1600
      0
      2
      0
      0
      0 x 1000000000000000
     
      15
     
     
      Microsoft-Windows-ServerManager/Operational
      Win2K8HDCRoot.hDC.com
     
   
   
      http://schemas.Microsoft.com/win/2004/08/events"xmlns ="Event_NS">
        An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)
  
     
   
  

  *****************************************************************

  Details of home:

  Win 2K 8 R2 Enterprise
  Processor: Xeon x 3440
  Roles: Hyper-V, file Services
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  Virtual machines running: 6
  Total none of the network adapters: 2
  1 NETWORK card: (Intel (r) 82578DM Gigabit Network Connection is connected to service internet broadback. "Statis IP" is set for my server.
  Not virtual networks: 2
  Virtual Network 1 is "External" type and connected to the NIC1. The value settings IPv4/IPv6 IP addresses and DNS automatic.
  Virtual Network 2 is of the type 'internal '. IPv4/IPv6 settings is set to Auto for IP and DNS addresses.

  *****************************************************************

  Information on the virtual machine:

  Win 2K 8 R2 Standard
  Roles; "Domain service active Directory", "DNS Server", "File Services" and "Web Server (IIS).
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  None of the network adapters: 2
  Network adapter 1 connected to 'Internal' with IPv4 set to a static IP address '192.168.10.1 ' and DNS set to ' 127.0.0.1'. IPv6 is disabled
  Network 2 connected to 'External' and IPv4 adapter set to automatic for the IP and DNS addresses. IPv6 is disabled
  Domain controller for HDC.Com.

  *****************************************************************

  History of the virtual machine:

  Initially, she felt just VS2010 and SP2010 installed without DNS and AD DS roles added. Later, we VS and SP2010 has been uninstalled via the Control Panel, as well as other programs, I can't recall. Then added roles DNS and Active Directory domain to create and control the field x ".com". After a few days, another virtual computer has been configured in the same way and 'AD FS' role added to try app based on the claims. In the coming days, all of the roles above have been removed and added to create and control the current domain ' HDC. Com'. Before this step, the self-signed certificates that have been installed as part of the App claims have been removed from MMC, and IIS services. Don't forget to change the name of the computer as well.

  *****************************************************************
  I'm not good at bases of the any tried out above learning, but ask the members of the scholarly community to help me solve the problem and I'm sorry if I ask some silly questions as part of this thread.

  Hello

  Is generally answer the question you have posted in the Microsoft Answers forums. It is better suited on TechNet forum
  TechNet Forums -http://social.technet.microsoft.com/Forums/en/categories/

• Printer installation tries to install e-printer on a netbook... don't get a message on the spooler service. What is the spooler service?

  Try to install e-printer on a netbook... don't get a message on the spooler service.  What is the spooler service?

  Hi Pat,

  Spooler service manages print jobs by saving in a queue and submit them to the printer in order specified instead of sending them directly (which can cause the printer back up if too is sent at a time depending on how printing is setup and the printer works).

  Try the simple fix to see if it works.  Go to start / Control Panel / Administrative Tools / Services and place you on print spooler and double-click it.  Click the Dependencies tab, go to all the services listed there and confirm that they are automatic and started.  If this is not the case, change it to automatic, and then restart them.  Once finished, return to the print spooler and set it to automatic and start it.  Click OK and close out Services and control panel and restart.  When you come back, come back to Services and check that the print spooler again told automatic and started.  If this isn't the case, after back and let's check other things.  If so, proceed to the installation of the printer, and this particular problem should no longer be a problem.

  I hope this helps.

  Good luck!

• Code 80240016 has received after trying to download Service pack 1 updates, the download listed below will not load even after a computer restart, also I can not update my yahoo Messenger 10.

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Download size: 6.8 to 26.6 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  The Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features gradually based on .NET Framework 2.0, 3.0, 3.5 and includes the cumulative upkeep updates for .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates. This update is provided to you and under Windows Vista and Windows Server 2008 license terms.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=133335

  Help and Support:
  http://support.Microsoft.com

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner