Dimensions of the lattitude E6320 HDD

Similar Questions

• Dimensions of the image

  I do not understand the dimensions of the preview image. What number is the height?

  First number is the width, the second height.

• Cannot show the dimensions of the image on a Mac?

  Hello

  I know in the 'Pictures' folder, you can select "Show view options" and then "view info point" and it will show dimensions photo... but it is not possible in a different directory, not to mention that the pictures folder?

  I photograph weddings for a living, and I'm fairly new to mac. Naturally, all my images are stored on external drives... I don't see the dimensions of the image? It seems that I have to open each image individually within the preview, and then press CTRL + I to see! Please tell me I'm wrong.

  4 K - end iMac 2014

  You can right-click (command-click a button or the trackpads) on the image file and select information.

  The title of the chapter more information, one of the entries is dimensions

  

  Alternatively, if you set the display of the viewfinder to the list, is one of the optional columns to Dimensions. Command-click on the column headers to add or remove columns.

• Drive hard hdtb310ek3AA green / red - is the two identical HDD?

  Hello. Model HDTB310EK3AA comes in a red and green packaging. Now I have two, one is packed red, the other green. The Red packed HDD has a number of HDTB310EK3AA ACS: L A, the Red packed a college HDTB310EK3AA: P B.

  Now, these two drives are considered to be a single model? I see that the packed HDD red often tend to cost more to purchase than the packed green ones. I wonder why. Thank you. Rich.

  P.S. I have a picture that shows the colors of the packaging: Red: standard; Green: advanced and gray: Professional. Which is also to ask me.

  In any case, this is why look like than pay the higher price for the packed HARD drive in red, when you arrive (apparently) the same product packaged in green. Also, I think this model is now only being packed in green. I think that this is the case, do not know about you.

• The dimensions on the mobo MTQ45MK need, ThinkCentre M58P desktop computer

  All - beginners, glancing a ThinkCentre M58P, not the SFF desktop computer, with MTQ45MK mobo and my understanding is that there mATX mobo, but I need the dimensions because it may wind up in a different chassis until this project is completed. I think they call this Panda Board. Thank you

  Bob87

  Receive my eBay system, dimensions on the mobo are 9.6 x 9.6, which is the larger of the two form factors card mother mATX. It makes sense, since it is so complete. I will detail my swap of the system in another forum,

  Bob87

• What are the dimensions of the ipad2

  What are the dimensions of the iPad 2 that I own.  Can not find them anywhere.  Looks like the iPad 2 of the same size?

  iPad 2 Air care http://www.apple.com/ipad-air-2/specs/

  iPad 2 form https://support.apple.com/kb/sp622?locale=en_US

  They are not the same size.

  -AJ

• Need help with the dimensions of the wallpaper

  I'm having trouble with the size of the paper painted. I created a wallpaper of 640 x 480 for a friend who was composed of a glass for each row of icons - so the icons looked like they were sitting on the glass shelves. However, after the wallpaper has been transferred to the phone, the shelves were out of position. I edited the wallpaper to 455 x 320 (height less the area occupied by the notification bar), transferred to the phone and the shelves were in different places, but always out of position.

  Some other wallpapers I created include gradients had horrible air once set as the background of the phone. This tells me that the phone is stretching or compressing the wallpapers. I saw that some of the default look wallpapers. Anyone know where I can get copies of the default wallpapers? This could help me with dimensions.

  Here's an example: I have attached a background degraded at this post. When I transfer this wallpaper on my phone, I see individual strips of coolor rather than gradual change from blue to black which was intended. If the wallpaper is the exact dimensions required, the gradient effect is expected instead of the bands of color display.

  What is the exact size required for the best wallpaper? I've been using 640 x 480, but this isn't the best size.

  It seems to be the screen of the Cliq XT, can't get on Vibrant, HD2, or MTS.

• DisplayImageFile() does not change the dimensions of the image control

  Hello

  I put in an image with DisplayImageFile() control image + assigning to the attribute of control ATTR_FIT_MODE = VAL_SIZE_TO_IMAGE. The image size is larger, then the size of the control and I want the control to resize to the size of the image.

  It works fine except when I ask the dimensions of the control with GetCtrlAttribute (panel, control, ATTR_HEIGHT, & height), I get the original size (before calling DisplayImageFile())...

  It seems I missed something basic...

  Environment: LAB Windows CVI 2012, Windows 7

  Thanks in advance

  Ramy

  I don't know if you still experience this problem or not, but I came across this discussion now and wanted to point out that this could happen if your picture controls if it is covered by another control or is it hidden altogether (and there might be other similar situations that I can't think of right now).

  When this happens, the CVI runtime can pull the image directly on the image. Instead, he plans an asynchronous action that will redraw this section of the Panel from the back to the front (if it's just overlapped, not hidden). It is only in the later action that the image is applied to the control, and it is only then that the control is resized to fit the image. This may seem immediate to the casual observer, but, because it is asynchronous, you can't try to get new size immediately after calling DisplayImageFile, because the image is not yet in control at that moment.

  Ironically, this occurs only if the control has already been set to the image size at the time you call DisplayImageFile. If this isn't the case, then the new size is applied when you later change the mode made programmatically. Whereas if the adjustment mode has been already updated the image size, trying to programmatically set the same value of the image size has no effect and nothing happens then.

  If this is what is happening, one way around this would be to call ProcessDrawEvents or ProcessSystemEvents immediately after the call to DisplayImageFile. Unless the control or Panel has been hidden way explicit, which will require the drawing action will take place at this time, and you should then be able to get the new size of control at any time after that.

  Luis

• Exchanging the 500 GB HDD with a SSD 128 GB on a fancy m6 1101-so

  Hello

  I was trying to replace/change the 500 GB HDD with a 120 GB SSD installed on this laptop. My plan was to use the SSD as boot drive and the HARD 'normal' storage disk in a cradle of HARD drive in the optical drive Bay. But my problem is that during the backup of the disc at first, I did install, the installation leaves boot loop once the installation is finished and he wants to start windows for the first time.

  All those who know what is my problem? At the beginning I had problems with even getting to the start screen, but I solved it with the boot and installation of windows with the BIOS in legacy mode.

  Hope that there is a magician who could help me.

  You cannot use recovery discs that you made from 500 GB HARD drive to restore a 120 GB drive in most cases.

  You can clone the SSD HARD drive. (Note: total capacity used on the HARD disk must be less than the total size of SSD for cloning to work). Use Macrium reflect free cloning tool & SATA Adapter USB to connect the SSD for laptop by USB.

  Concerning

  Visruth

• Dimensions of the OfficeJet 6100 with tray in use

  I'm wondering someone can tell me the 'other' dimensions of the OfficeJet 6100 printer.  They give the dimensions with the ferry closed paper but I would like to know the measures (particularly depth) when the printer is used.

  Also... the paper go in and out at the front of the printer?  Thank you very much!

  No problem, Cindy, happy to help. Have a good!

• What are the dimensions of the Pocket-size images and Board Contact?

  Dimensions of the photo images print Windows 7

  No one knows what are the dimensions in the Pocket and the images of the Board-Contact format? I can't crop to fit without knowing what size I have to crop.

  Hi Weaselspoon,

  Dimensions for portfolio would be 2.5 x 3.5 inches.

  Dimensions for photos of the contact sheet should be 2 x 2 inches if you are using the Windows Photo Viewer.

  See picture printing: frequently asked questions to get answers to some common questions about printing in Windows Photo Viewer.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Dimensions of the Image App for v5.0.0.328

  Hi all

  I don't know if anyone else has encountered this problem before.  I tried to search this forum and others, but no one mentioned it yet. I have a BB Storm 9530 and recently upgraded the operating system to 5.0.0.32 8.

  The app I'm developing detects the value of HomeScreen.getPreferredIconHeight () and HomeScreen.getPreferredIconWidth () and figures what icon to use. Based on this list of devices and the dimensions of this url

  http://docs.BlackBerry.com/en/developers/deliverables/6625/Dimensions_for_screens_images_and_icons_4...

  the dimensions of the icon on the homescreen for the storm is 73 x 73.

  The app pulled up to the icon of evil with the operating system set to day, so I did a bit of debugging to see what has changed. I discovered that the value of preferredIconHeight is 70 instead of 73. I also tested this point on the 9530 with 5.0.0.32 Simulator 8, and I get the same result. I was wondering if the dimensions of the favorite icon changed with the new OS - so if I need to update my code to keep account of the change. I have not seen anywhere that the dimensions have changed, then maybe I'm picking up on the dimensions wrong somehow?

  Thank you!

  Hello

  Sorry it took me a while to answer this.  I got a response from the BlackBerry Support on this subject. There was a problem with the HomeScreen.getPreferredIconHeight () method. This will be fixed in a future release. 73 x 73 is the resolution of the correct icon.

  Thanks for your help,

  Shirwah

• Contact not appearing is not in the Lattitude

  In attitude when I try to send a friend who is in my phone and my position Google address books, they do not appear in the list of contacts. This is even if it is set to all contacts.

  He is the only person to whom I sent an 'official' invitation to grace to my online Google account via my computer.

  Any suggestions? Thank you.

  Well, I received including this one.

  You must go to your Gmail contacts and change the e-mail address for each contact label.

  My contacts that have e-mail addresses have been labeled as "other". When I changed the label of 'Home', they began to appear in the Lattitude.

  In addition, on the Droid, I had to do a manual for my Gmail account sync after I changed all the labels.

  Menu / settings / accounts & sync / select Gmail / Menu / Sync now

• What are the dimensions of the envelope sizes listed in the drop-down list?

  HP 1050 J410 All in One

  Windows 7 Home Premium SP 1 64-bit

  Microsoft Office Word 7

  New printer. My old that offered the opportunity to allow me to measure the envelope and enter the size of the custom formats. My new printer offers no custom formats and I don't know what size other than A 10 for letters.

  Where can I find the dimensions of the options available in the menu drop-down?

  Why print instructions also suggest the use of address labels instead of printing the address of the sender on the envelope? This printer has a known calibration problem?

  Never mind.  This new guarded printer kept giving error messages, that is ink.  Icons flashing.  Very noisy.  I got and will try to use my old printer.

• Dimensions of the pie chart

  I have a Camembert in InDesign. When I click on it, the dimensions seem to be 203 x 203 pixels:

  

  I want to make a graph in similar sectors in Illustrator. So, when I click to create a new pie chart, I put the dimensions of 203 x 203 pixels:

  

  But when I try to copy/paste the new graph in InDesign, it does not match the dimensions of the original graph. You can see if I overlay the new graph on the old chart:

  

  What I am doing wrong?

  The size of the pie in Illustrator are not accurate, and the transformation Panel does not work with tables. This has been a bug for eons.

  After you create the chart, you will need to resize the graphic to the size you want, and if you do several charts of the same size, it might save some time if you duplicate the first properly sized graphics.

  In addition, when you create the graph of x 203px 203px, which multiply by 1.15. If you do not have a stroke, which protrudes beyond the border of the chart, this should give you what you need.