Don't fill with color frame?

Similar Questions

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Framework will not completely fill with color InDeisgn CS

  I have a recurring problem in InDesign CS, but this project don't happens only every six months, and I don't remember how I came across the solution from last time. Hope someone might be able to help.

  I have a page layout left magazine, that I have used for years with just a couple of blocks of text and a picture. I have not changed in ages content, except to switch text updated with each new issue. (It's just an editorial page, essentially).

  Behind this layout, I placed a picture and filled with a beige background.  It begins at the gutter (right side) and then reaches the purge in the other three directions.

  For some reason, on the left side and at the bottom, I have a domain that will not color fill.  If I duplicate the image on the right page, this substantive area extends all the way at the bottom of this page, too.  It's almost as if there is something with a text wrapping or a white fill bumping into the outer edges (not the gutter and not by the top) of the page.

  For the life of me I can't figure out what it is.  I have recreated the spread, started, stopped the program.  I paused to screw up my preferences because I hate the idea to recreate.  But I have this vague memory, the last time I think than that, it was something pretty simple and does not require screw up my preferences.

  I know I'll feel stupid when the answer presents itself - whether by someone on the forum or if I remember on mine.  But of course, I do not no progress trying to figure out or work my memory.

  I have, moreover, ensure transparency, attributes and effects.  Nothing there.  I'm puzzled.  And I'm in the middle of a date limit.  Anyone who has the magic answer?  Do not hesitate to make me feel as stupid as you want

  Thank you!

  There could be a corruption in your InDesign document in this case.

  Try the following:

  1. Choose file > save as
  2. In Save As Type (Windows) or Format (Mac), select InDesign CS4 or earlier (IDML)
  3. Click Save.
  4. Then choose file > open in InDesign and go to the. You have already saved and open the IDML file.
  5. If everything seems OK, then save this file and use that one.

  CARI

• Filled with color HP do not print

  I filled cartrage color HP in the past and all worked very well.  This time the yellow & blue will not print.  I have the head of alcohol-soaked and cleaned, but no change.  He did dry a lot so I don't know if it is the cause or not.  Anyway to clean better what should I do or is it irreparable?

  Thanks Glen

  You asked what you need to do.  I told you.  Please call the manufacturer of ink and ask them why their ink does not work.

• Page point fill with color or no fill

  It's about Adobe in the design of the CPP.

  In the Adobe page, we frame graphic and TextFrame

  I want to know the element of page (eg. Text block) fill it with the color or no fill.

  IDataBase * db =: GetDataBase (iDocument);

  UIDList pageItems (db);

  InterfacePtr < ISpreadList > iSpreadList (iDocument, UseDefaultIID());

  for (uint32 i = 0; i < iSpreadList > - GetSpreadCount(); i ++)

  {

  SpreadUID UID = iSpreadList-> GetNthSpreadUID (i);

  InterfacePtr < ISpread > spread (db, spreadUID, UseDefaultIID());

  for (int32 i = 0; i < spread > - GetNumPages(); i ++)

  {

  spread-> GetItemsOnPage (i, & pageItems, kFalse);

  for (int j = 0; j < pageItems.size (); j ++)

  {

  UIDRef pageItemRef = pageItems.GetRef (j);

  / / Question: look for the Page Item fill or no fill
  

  }

  }

  }

  Previous question: How do I move a page to a location IDocument element (x 1, y1) to (x 2, y2)

  GetFillRenderingUID returns swatchUID.

  check colorUid is noneSwatchUID?

  NoneSwatchUID UID = Utils()-> GetNoneSwatchUID(::GetDataBase(document));)

• Fill with color

  I can just fill my drawing with a color box, or what I go through and make layers etc.?

  Look at the toolbar on the left side. You will see an icon with a dotted line. If you hold down the mouse a few seconds on the Tools icon more will pop up. Here are the tools of selection as well as the icon that resembles a rope lasso and a brush with a line dashed.

  You will use the brush with the dotted line the most. This is called the quick selection tool. You can paint over an area to make a selection and he try to help you. At any time you can hold ALT on windows or opt key on the mac to remove a part of the selection.

  No matter which icon in the toolbar that has a small triangle in the lower right corner has additional tools that you can use. Just hold the mouse for a few seconds, as you did with the rectangle Select tool (the first icon that looks like a dotted line)

  The rectangle selection tool is great for the selection of a rectangle, you will find that the modifier keys are very useful with the use of those selection tools, as well as most of the other tools.

  The shift key will restrict the selection to a perfect square or a circle for example. ALT/Opt is to remove and ctrl/cmd is to use the move tool temporarily. Manufacturing is easier to move a selection or object.

• Object drawn with a pencil will not fill with the paint bucket tool

  I draw an object using the pencil tool in Flash CS5. Since I use several traces I connect them all by clicking on Edit, combine objects then Union combining the traits in a single object. But when I try to fill it with the color that it doesn't work. Even if I make sure there is no gap. A few small areas that are closed in the fill of the object with the color, but do not know why the rest of the object refuses to be filled with color.

  

  I fiddled around and switch between the object drawing Mode and drawing Mode, but that doesn't work anymore. Usually when I use the Brush tool I have no problem filling the object with colors. But for some reason, I can't when I use the pencil tool! Help, please!

  OK, think about it. If you select your character and in the properties to ask him to be 3000 wide, then zoom in to just behind his ears, you'll see a gap. There is another gap directly in front of the ears.

  The thing filling gaps that Chris mentioned does not immediately work, because your lines are still in odd drawing object, the union did you yet left the tiny holes. You can exit this mode by a Break Apart and select all. Areas with gaps fill again right away, but the small fill openings feature will work. The option size of gap is in the tools downwards when the paint bucket is selected.

  I'm going to insert an image, which shows the great super version, where you can see two gaps, and you can see how the right box is filled, even if there is a gap.

  

• Problem of fillup with colored rectangles

  Here is my canvas

  < mx:Canvas id = "b1" x = "10" y = "10" height = "40" width = "300" borderStyle = "solid" borderColor = "black" / >

  To fill the canvas with rectangles, I wrote the following code

  for (var i: int = b1.x; i < b1.x + b1.width; i = i + 15)
  {
  var line1:UIComponent = new UIComponent();
  var lineThickness1:Number = 1;
  var lineColor1:Number = 0 x 000000;
  var lineAlpha1:Number = 1;
  LINE1. Graphics.LineStyle (lineThickness1, lineColor1, lineAlpha1);
  LINE1. Graphics.MoveTo (i, B1.y);
  LINE1. Graphics.drawRect(i,B1.y,15,B1.) Height);
  this.addChild (line1);
  }

  amount of the fine can

  < mx:HBox = "40" x y = "450" >
  < mx:Label text = "" enter units: "fontWeight ="bold"fontSize ="15"/ >"
  < mx:TextInput id = "tiUnits" width = "30" maxChars = "1" / >
  < mx:Button id = "btn" label = "OK" click = "btnCall (tiUnits.text); "/ >
  < / mx:HBox >

  In btnCall()

  entry entry in tiUnits should be converted to integer, and taking into account this value, I need to fill the canvas with color rectangles(width-15)

  for example: If an entry is 15 the first rectangle must fill with color and if I come back in 30 then after first two rectangle rectangles each width 15 must fill

  in this way I have fill the canvas one after the other

  Please help me...

  Hope that this code solves your problem

  private var lastPos: int = 0;
  
  private function drawRectangle(event: MouseEvent): void {
       var unit: int = (Number(tiUnits.text) / 15);
       var colors: Array = [0x0000FF, 0x00FF00, 0xFF0000, 0xFF00FF, 0x00FFFF, 0xFFFF00]
  
       for(var i: int = 0; i < unit ; i++) {
            var lineThickness1: Number = 1;
            var lineColor1: Number = 0x000000;
            var lineAlpha1: Number = 1;
            var bgColor: uint = colors[Math.floor(Math.random() * colors.length)];
  
            var line1: UIComponent = new UIComponent();
            line1.graphics.lineStyle(lineThickness1, lineColor1, lineAlpha1);
            line1.graphics.beginFill(bgColor, 1.0);
            line1.graphics.moveTo(((lastPos + i) * 15), b1.y);
            line1.graphics.drawRect(((lastPos + i) * 15) - 1, -1, 15, b1.height - 1);
            b1.addChild(line1);
       }
       lastPos = lastPos + unit;
  }
  

• Define the pattern fill and gradient with color

  Hi all!
  
  This is my first post in the forum of fireworks. Also, this is the first time I'm using Fireworks 8. It's a bit like Photoshop and Photoshop, I can do a fill with a custom pattern by creating a template and do a 'use as motive' and selecting this model and do a fill with it using the bucket fill and then by selecting the model, and fill with a gradient (such as blue-white)
  
  I'm trying to do the same thing with Fireworks 8, but I don't know how. First of all, I created the template in a file separated and saved as a PNG image then in Fireworks, bucket filling (not degraded bucket) on model and then click 'Other' and opened upward model that I created and I filled the area that I wanted to. Now, this is the part that I can't figure out how to do. My boss is points spaced with 1 pixel between each point. I want their gradient fill and I can not blend them. Any help? Thank you

  Quote:
  Posted by: ODoyle rules
  Hi all!

  This is my first post in the forum of fireworks. Also, this is the first time I'm using Fireworks 8. It's a bit like Photoshop and Photoshop, I can do a fill with a custom pattern by creating a template and do a 'use as motive' and selecting this model and do a fill with it using the bucket fill and then by selecting the model, and fill with a gradient (such as blue-white)

  I'm trying to do the same thing with Fireworks 8, but I don't know how. First of all, I created the template in a file separated and saved as a PNG image then in Fireworks, bucket filling (not degraded bucket) on model and then click 'Other' and opened upward model that I created and I filled the area that I wanted to. Now, this is the part that I can't figure out how to do. My boss is points spaced with 1 pixel between each point. I want their gradient fill and I can not blend them. Any help? Thank you

  Hi all!

  In fact I just understand how do.

  Once I made the filling inside the Rectangle, I flattened selection, took the magic wand to select and did a reverse selection filled with gradient with the color I wanted and I checked in the properties of the gradient tool marked "selection of filling" and it worked. I don't know if there is an easier way to do it, but that's how I thought of it.

  Thank you

• In collaboration with the canvas. Don't fill the rectangle.

  Hey, I work with the canvas.

  [code]

  G2d GraphicsContext;

  g2d.strokeRect (x, y, w, h); Rect is drawn.

  g2d.setStroke (Color.White); Strokes are white, works just as well.

  g2d.setFill (Color.Blue); Nothing happens. I'm waiting for the rectangle to be filled with blue. I'm doing something wrong?

  [/ code]

  Thanks to you all.

  Edit: lmao, try to format my text.

  import javafx.application.Application;
  import javafx.scene.Scene;
  import javafx.scene.canvas.Canvas;
  import javafx.scene.canvas.GraphicsContext;
  import javafx.scene.layout.Pane;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  
  public class CanvasFillRectTest extends Application {
  
      @Override
      public void start(Stage primaryStage) {
          Canvas canvas = new Canvas(400, 400);
          GraphicsContext gc = canvas.getGraphicsContext2D();
          gc.setFill(Color.BLUE);
          gc.setStroke(Color.WHITE);
          gc.fillRect(50, 50, 300, 200);
          gc.strokeRect(50, 50, 300, 200);
  
          Pane pane = new Pane();
          pane.getChildren().add(canvas);
          Scene scene = new Scene(pane, 400, 400, Color.CORNFLOWERBLUE);
          primaryStage.setScene(scene);
          primaryStage.show();
      }
  
      public static void main(String[] args) {
          launch(args);
      }
  }
  

  Edit: lmao, try to format my text.

  Choose "Use the Advanced Editor" at the top... and then select your code, press the button marked "insert" >, select syntax, Java.

• Fill with solid color problem

  Please, please help to find out why Photoshop fills a selection of transparent color, while opacity and fill with a layer are set to 100% and blend modes is 'normal '.

  Thank you!

  Olga,

  In this case I have no idea, sorry.

  The only thing I can think off is to reset the preferences. When Photoshop sometimes doesn't Photoshop behave.

  But before you do this make sure you save your actions, gradients, shapes, brushes, etc. or you will lose the ones you made.

• Keyboard shortcut for fill with the color layer are opposed on my PS CS6 OSX install help?

  Hi all

  I'm kinda a noob and following a tutorial... and found something strange and I wonder if you could help me understand what is happening.

  I have Photoshop CS6 extended on a macbook pro (late 2011).

  I am running OSX v 10.7.5

  I'm the long and the instructor has added a new layer. I did it.

  He then filled the white layer which is its background color (it has foreground black, white background). I have same evidence / background colors.

  Now I thought on mac to fill with the foreground color, you hit Apple + Delete and to fill it with the background, press Option + delete

  It's the exact OPPOSITE for me. I hit Apple + DELETE (or even BACKSPACE) and filled it with my background color, which is white

  If I hit Option + DELETE (or RET.), filled it with my foreground color.

  I tried searching in the area of keyboard shortcuts change... but I do not see these settings anywhere.

  I have an external keyboard plugged into my mac. It is a 3rd party one, but seems otherwise never function normally.

  Keyboard here is: http://pckeyboard.com/page/UKBD/UB40P4A

  Any suggestions why my shortcut keyboard for a fill with the color layer could be reversed?

  Thanks in advance,

  CC

  Looks like it doesn't work as expected

  keyboard shortcuts in Photoshop to paintng:

  https://helpx.Adobe.com/Photoshop/using/default-keyboard-shortcuts.html#keys_for_painting

  

• How to fill open with color spaces?

  I have a picture of a dog, which I traced, and he left the image with open space that makes up the major part of the body of the dog.

  How to close the body, inbetween all rough texture that is his hairy body, closing roads, will fill another color?

  I am a beginner Illustrator and have been through "Classroom in a book" excellent Adobe and while not an expert, hazard a guess which "Paint" is what you should look at? Drag a marquee around the dog and select the object-> paint Live-> do to a live paint group, then look at Options space and detection of space to have Illustrator select detect and close any gaps. Even if I'm wrong of course!

• Auto fill cells with color based on the result in the cell

  Is it possible to automatically fill a color in an excel cell based on the result that is displayed in a cell

  for example, if the result is in (0.00 - 1.00 = green), (superior to-2.00 orange)...

  	-1.00
  	0.54
  	-2.50

  Hi CP.

  If you use excel 2007
  Use the conditional format in the home TAB
  http://www.excelbanter.com/showthread.php?s=ae23ced152268f200ceb2072db8ca262&t=212501

  Kind regards

  Chauvet J.

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.