Don't monitor no signal detected after Windows update

Similar Questions

• Battery not detected after Windows update

  Hello

  I own a HP Pavilion G series laptop and I have windows running on it 8.1. Windows just made me finish an update, after which it is not detecing my battery more. Initially, he says: "trendy but no charging current. That's why I shut down the computer, removed the battery and plugged in. Now, he said only: "no battery is detected.

  I should mention that I do not use the original supplied with the laptop battery. It's a long battery life that worked well until the update. Please note that I am not too good with computers.

  I appreciate any kind of help in this situation. In addition, please let me know if any other information is needed to help out me.

  Thank you

  Edit: Now, sound to pass the message between: "no battery is detected" and "trendy but no charging current.

  That of Emad,

  Welcome to the HP Forum.

  The updated patch is maybe not able to detect "non standard" battery you are using.

  You could try to use a Restore Point and affecting the system to a date before the update was installed.  In this way, the offending update will be deleted from your computer.

  Using Microsoft System Restore (Windows 8)

  Contrary to belief, you have a choice on the installation of the updates.   Windows cannot make you install updates on your computer.

  You can set Windows updates notification, so you can decide what updates are valid for your situation.  Many people choose this course as one that fits, even if it forces you to do a little more work.

  If you set the Windows updates to be notified

  • and you always create a Restore Point before you choose to install updates
  • and ONLY install you the important updates (never optional updates)
  • and you've read about the updates that you have any concerns at all
  • then, you may find that you have less long-term problems
  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8

  Click on the thumbs-up Kudos to say 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Monitor does not work after windows update failed

  After the recent updates on my computer Vista installation seemed stuck to update 2. I pressed the off button and he turned his back and now my monitor does not display anything, he spends just the analog to the digital looking for a signal. I tried the computer to another monitor with different tracks and it's the same thing. Can anyone help?

  Starting in recovery system (from the Vista DVD) options and do a startup repair.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  Reference: http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  If the startup repair does not resolve the problem, try other system recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7 Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• Laptop Presario CG56: CG56 crashed after Windows Update

  After Windows update, set during the race, woke to find a "scree Orange" with the logo of Compaq.  Press F11 to enter in recovery mode has organized the restoration of the system for each restore point.  Finished with 0x8000ffff.  A ran the recovery system completely at the end.  Finished with the Orange screen.  Minimized ran impage recovery all the way to the end.  Repeat screen Orange.

  I find that the BIOS is corrupted in Windows Update, somehow.  I can get to the line of command in recovery mode, but I don't know what to do.

  Help!

  Me am HP Advanced System Diagnostics V3.0.3.0 by pressing f2 until the screen has finally come.  Do you have the System Diagnostics.

  Have you hard reboot by removing the battery, press the button for 15 seconds, extra power, hit start and the start up like a new PC was started and Windows.

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Cannot view full screen flash and silverlight media after Windows Update

  problems with flash and silverlight Muslim poor after windows update said updated the driver and will not play in full screen right.

  Windows Update told to update the driver of the GUI.  After I did my computer do not play in full screen with flash and silverlight. It makes a square with 3 inches on each side.  previously, it would fill the entire screen.  I already talked to Nivdia and they helped me to install again and it runs right is not their product.  I don't know if it's the Avermedia driver then that is the problem.  I have windows vista 32 bit.  When I try to click with the right button on the silvery light, it causes the failed computer.  I uninstalled flash light and silver and it does not solve the problem.

  Windows Update told to update the driver of the GUI.  After I did my computer do not play in full screen with flash and silverlight. It makes a square with 3 inches on each side.  previously, it would fill the entire screen.  I already talked to Nivdia and they helped me to install again and it runs right is not their product.  I don't know if it's the Avermedia driver then that is the problem.  I have windows vista 32 bit.  When I try to click with the right button on the silvery light, it causes the failed computer.  I uninstalled flash light and silver and it does not solve the problem.

  ===================================
  It might be worth a try to do a system restore to
  an hour before installing the updated video driver.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• After windows update, I tried to reinstall acrobat adobe XI that installed fine, but when I opened it, the language had changed into a kind of Cyrrilic alphabet. Weird! During installation I choose English as my tongue so have no idea what's going on

  After windows update, I tried to reinstall acrobat adobe XI that installed fine, but when I opened it, the language had changed into a kind of Cyrrilic alphabet. Weird! During installation, I choose English as my tongue so have no idea what's going on here. Any experience with this? I used the same dvd that when I initially installed so should have come out as done original installation in ' English.

  Hi rebrad999,

  Please see the following KB doc on this topic: error 'incompatibility of language between the entered serial number and language of launch Acrobat | Windows

  If the problem persists, I recommend you to uninstall acrobat and reinstall it after you download it from the following link: download Acrobat products | Standard, Pro | DC, XI, X

  Kind regards

  Rahul

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• slow after windows update

  Hello
  After windows update:
  my PC slowing significantly
  Windows search sometimes opens spontaneously
  pages (explorer) sometimes becomes white and the icons disappear and takes a long time to be closed
   
  I have ms security essential and it is updated, so I do not think that my system is infected.
  Thank you.

  MajidNavabi,

  • See the following topics

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us >

  http://support.Microsoft.com/FixIt/ >

  06/28 / 1106:37: 19 am

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can I remove the patch uninstall program after Windows Update completed?

  can I remove the patch uninstall program after Windows Update completed?
  are the uninstall program is temporary file? or the update file?

  because my full HARD disk starting with the files

  can I remove the patch uninstall program after Windows Update completed?

  Only if you are sure that you will never need to uninstall the update of 100%.

  my full HARD disk starting with the files

  See this discussion archived instead-online http://aumha.net/viewtopic.php?f=62&t=33827

• I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

  Hello
  I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

  Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

  Any guidance will be appreciated. Thnx Nick

  Hello

  If you meet this new,
  http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html