Dot11radio interface down

Hi Experts,

I have a Cisco AIR-AP1252AG-A-K9 in stand-alone mode on which access point it the dot11radio interfaces declined recently. All other interfaces are up. The dot11radio1 interface has been down/down state. I closed / not closed it & its now in down state:

Can someone help me please check why its down?

access-point1 #sh ip short int

Interface IP-Address OK? Method State Protocol

BVI1 x.y.z.a YES NVRAM up up

Dot11Radio0 unassigned YES NVRAM up up

Dot11Radio1 unassigned YES NVRAM until the bottom

GigabitEthernet0 unassigned YES NVRAM up up

I checked the power inline on the switch to which it will connect:

access-point1 #sh power inline GigabitEthernet 0/33

Admin Oper Power Device interface Class Max

(Watts)

--------- ------ ---------- ------- ------------------- ----- ----

Gi0/33 auto off 0.0 s/o s/o 15.4

AdminPowerMax AdminConsumption interface

(Watts) (Watts)

---------- --------------- --------------------

15.4 15.4 Gi0/33

There is currently no association on the AP:

access-point1 dot11 Association #sh

access-point1 #.

FOR INFO:

access-point1 #sh version

Software VERSION of the SOFTWARE (fc2), Cisco IOS, C1250 Software (C1250-K9W7-M), JA1 Version 12.4 (10B)

Technical support: http://www.cisco.com/techsupport

Updated Thursday 30 January 08 12:04 by prod_rel_team

ROM: Bootstrap program is C1250 boot loader

BOOTLDR: C1250 bootloader (BOOT-C1250-M) Version 12.4 (18A) JA1, RELEASE SOFTWARE (fc1)

access-point1 uptime is 1 year, 12 weeks, 3 days, 21 hours, 45 minutes

System to regain the power ROM

System restarted at 14:02:43 GMT Friday, October 12, 2012

System image file is "flash:/c1250-k9w7-mx.124-10b.JA1/c1250-k9w7-mx.124-10b.JA1".

This product contains cryptographic features and is under the United States

States and local laws governing the import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third party approval to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. laws and local countries. By using this product you

agree to comply with the regulations and laws in force. If you are unable

to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:

http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at

[email protected] / * /.

Cisco AIR-AP1252AG-C-K9 (PowerPC 8349) Prozesseur (revision C0) 49142K / 16384K bytes of memory.

Card processor ID FGL1502Z0BC

PowerPC 8349 clocked at 533 Mhz, the revision number 0 x 0031

Last reset of tension

1 gigabit Ethernet interface

2 802.11 radios

32K bytes memory simulated by flash not volatile configuration.

Basic Ethernet MAC address: E0:5F:B9:9 C: A6:1 A

Part number: 73-10425-06

Kit numbered PCA: 800-27630-06

Revision number of PCA: B0

Serial number of PCB: FOC145229FE

Top Assembly part number: 800-29531-03

Top of page the Assembly serial number: XXXXXXXXXX

Top of page revision number: A0

Product/model number: AIR-AP1252AG-C-K9

Configuration register is 0xF

access-point1 #sh inv

NAME: 'AP1210', DESCR: "Cisco Aironet 1200 Series Access Point.

PID: AIR-AP1252AG-C-K9, VID: V03, SN: FGL1502Z0BC

NAME: "Dot11Radio0', DESCR:"802.11n 2.4 Ghz Radio.

PID: AIR-RM1252G-E-K9, VID: V01, SN: FOC145157B2

NAME: 'Dot11Radio1', DESCR: "802.11n 5 GHz Radio.

PID: AIR-RM1252A-C-K9, VID: V01, SN: FOC145236NK

Your radio module is a failure. I think that your access point is > 4 years old.

Sent by Cisco Support technique Wii App

Tags: Cisco Wireless

Similar Questions

High HEAT related physical Interface down

Hi guys!

We try connect FI 6248 (UCSM 2.1.1a) of Brocade 6510 swtich (FI a Brocade both switches separately). The ports are configured as port Uplink FC and the work of the FI in end-host mode. We have created the service profile. Occurs immediately after combining the SP to one of the blades two errors:

High HEAT related physical Interface down

High HEAT related physical Interface down

and it's the 2 vHBAs created in MS. Is this a normal situation if the OS is already installed on the host? We cannot set up SAN side Brocade because we don't see any WWPN of the vHBAs configured in MS. We see only FI WWPN (as I think). NPIV mode is activated by the side of Brocade.

Can someone explain what can cause this problem?

Sergey,

What is expected if there is no OS installed yet, see the possible reasons for the BRISK down in this bug:

https://Tools.Cisco.com/bugsearch/bug/ CSCul99847

Note THE answers useful.

-Kenny

Static route disappears when the interface down

Can someone please help me on this:

I have the static route on a router to a remote network, remote network interface was in a line down to the low State and static entry has disappeared from the routing table, I could see the entrance to the road, static in the config but it possible? It's a router 3745 with a Diginet 128 K link to remote network.

It is perfectly normal behavior. If the static route would remain in the routing table, the router might be transfer traffic to an interface that is not working properly.

An exception is a dialer interface, which connects to the application. The router must be able to transfer the traffic through a dialer, even when there is no call in progress. In this case, the router will be "spoof" the connection as being upward. You can see with ' show the Dialer interface... '

HTH

Cisco aironet 1131AG AP radio interface down

Hello
I have a problem with my cisco aironet 1131ag AP radio interface.
I configured the ssid, authentication and encryptation me have it (the ssid) associated with the radio interface, but the interface of dot11radio still in a State of remission to zero, and if a restart the interface this msg appears "% DOT11-4-NO_SSID: no SSID configured." Not started Dot11Radio0 ' what I need to do?
Help, please

Configuration:

Building configuration...

Current configuration: 1394 bytes
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host ap name
!
Select the 5 secret $1$ Mf3YfBFQQS2.6MSWHQOeG0 $URAK
!
No aaa new-model
domain IP Nida.local
!
!
!
dot11 ssid Nida
VLAN 1
open authentication
authentication wpa key management
Comments-mode
WPA - psk ascii 7 01100F175804575D72
admit-traffic
!
!
diet pre-standard trading online
!
!
username Cisco privilege 15 password 7 123A0C041104
!
Bridge IRB
!
!
interface Dot11Radio0
IP 192.168.1.80 255.255.255.0
no ip route cache
!
algorithms for encryption tkip encryption mode
!
encryption vlan 1 tkip encryption mode
!
SSID Nida
!
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0
192.168.1.81 IP address 255.255.255.0
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface BVI1
customer_id FastEthernet0 dhcp IP address
no ip route cache
!
IP http server
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
1 channel ip bridge
!
!
!
Line con 0
line vty 0 4
local connection
!
end

You must create the dot11radio0.1 and fastethernet0.1 interface

Must be something like this:

version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host ap name
!
Select the 5 secret $1$ Mf3YfBFQQS2.6MSWHQOeG0 $URAK
!
No aaa new-model
domain IP Nida.local
!
!
!
dot11 ssid Nida
VLAN 1
open authentication
authentication wpa key management
Comments-mode
WPA - psk ascii 7 01100F175804575D72
admit-traffic
!
!
diet pre-standard trading online
!
!
!
Bridge IRB
!
!
interface Dot11Radio0
no ip route cache
!
algorithms for encryption tkip encryption mode
!
encryption vlan 1 tkip encryption mode
!
SSID Nida
!
root of station-role

interface dot11radio0.1
encapsulation dot1q 1 native
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0
no ip route cache
automatic duplex
automatic speed

interface Fastethernet0.1
encapsulation dot1q 1 native
192.168.1.81 IP address 255.255.255.0
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface BVI1
customer_id FastEthernet0 dhcp IP address
no ip route cache
!
IP http server
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
1 channel ip bridge
!
!
!
Line con 0
line vty 0 4
local connection
!
end

PS has also removed the ip address dot11 interface slot and I'm not sure why the role of station is root?

VSL interfaces down

We have two new 6513 s with two 2 t modules Supervisor each. I put their place for quad sup vss sso and connected interfaces 10Gbs in the form of 'X '.

switch 1 t7 / 4---> switch 2 t7/4

swtich t7 1 / 5---> switch 2 t8/4

switch, 1 t8 / 4---> switch 2 t7/5

switch 1 8 / 5---> switch 2 t8/5

The conversion seems to be okay, but I see now that only two 10Gbs interfaces are active: t7/4 on each side. All others are down with no link (dark) light.

If I run the command

Sho switch port-channel virtual link

I see

Flags: - Low P - D bundled in port-channel

I have - autonomous s - suspended

H Eve (LACP only)

R - Layer 3 S - Layer2

U - N running - is not in service, no aggregation

f cannot allocate an aggregator

M not in use, no aggregation due to minimum links has not met

m don't use, port do not associate due to not meeting minimum links

u - unfit to tied selling

d default port

w waiting to be aggregated

Protocol for the Port-Channel port group

------+-------------+-----------+-------------------

Po1 (RU) 1 - Te1/7/4 (P) Te1/7/5 (D)

Po2 (RU) 2 - Te2/7/4 (P) Te2/7/5 (D)

Is there something more, what should I do? Something that I missed?

Have you also added t8/4 and t8/5 to the portchannels?

Can you post sh run and also sh etherc somm?

HTH

851W w / WPA - PSK - Interface goes down.

Hello

I tried to configure WPA - PSK on the router 851W. I followed the instructions using the SDM and properly active wireless WPA - PSK network. I have connected a MacBookPro to the network wireless, with all the features, then after a minute or two, separates the client and Dot11Radio interface goes down.

I have install a network open without any connectivity problems. I have search the net and forums of Cisco without success for a solution to this problem. Here is the link to the guide: http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_example09186a00808acf2f.shtml

Any ideas what might be causing the radio interface down with WPA - PSK configured?

Thank you.

For some it's IOS version WPA - PSK, which proved to be intermittent. Cisco CSCeh90412 bug describes it. Try to update the IOS version and check.

Troubleshooting of the IDS 4215 interface detection

Hello!

I am deploying IDS4215 with interface of remote sensing (Fa0/1) connected to the SPAN Cat3750 Gig1/0/1 interface.

The problem is the following. The ID works for a while (I am able to view alerts and States 'show int' Fa0/1 located upward). Then after awhile Fa0/1 goes down, I don't know why.

The Cat3750 shows that State of Gig1/0/1 passes the "follow-up" to "notconnect. All I can do is restart IDS.

Catalyst shows no error on the interface.

I am a novice in ID, and I appreciate any idea where to start troubleshooting.

Thanks in advance!

SSM

Catalyst settings:

GigabitEthernet1/0/1 interface

Span ID description

full duplex

Speed 100

end

control interface of the session 1 source article gi1/0/27 - 28

control interface of the session 1 source Gi2/0/27 - 28

control interface of destination session 1 item in gi1/0/1

Config of IDS:

! ------------------------------

! Version 5.1 (1)

! Current configuration changed the game 22 dec 10:11:22 2005

! ------------------------------

service interface

Physics-interface FastEthernet0/0

automatic duplex

automatic speed

output

Physics-interface FastEthernet0/1

FE0/1 description

Admin-state enabled

full duplex

Speed 100

output

output

! ------------------------------

service-analysis engine

vs0 virtual sensor

Physics-interface FastEthernet0/1

output

output

In my view, that there is something seriously wrong with version 5.1 (1). Why Cisco continues to allow users to download is beyond comprehension. I will be rebuild about 20 sensors today because of this problem. I have rebuilt 6 sensors Friday [from an ISO image, models 4235,4240,4255] and let them run this weekend. 5 out of 6 have the sensor interface down once again.

VPN tunnel interface causes

Hello
Can someone tell me various reasons/causes for the interface of VPN tunnel drops?

Thahkyou
Kind regards.
Aateek singh

Depends on your type of encapsulation. The most common:

-GRE: source down, not routable destination, GRE KeepAlive interface has failed.

-VTI: source interface down, not routable destination, security associations IPsec are not upward.

Lost the user interface in Premiere Pro?

A few weeks ago I signed up for creative cloud. I started using the first Pro CC. I knew that I couldn't take advantage of the Mercury engine because I have ATI Radeon HD 4870 512 MB. I was still able to edit and work. Today I went to send timeline to grade speed and it took forever to export, finally to halfway to send it, I gave up and revived Premiere Pro. When the first opened my UI had disappeared. Drop-down menus have all their but disappeared from the user interface. If I went in create new title, I could see that window, but the chronology, garbage, source and windows Records were not visible. I know that the sequence is always there because if I hit the space bar the sequence plays through my Kona card. I closed the first and I got a pop up menu Nvidia Cuda ask my update of drivers. It's strange because I have a card ATI not a Nvidia card. If I open all the other apps After Effects or Photoshop, all of the user interface is here. What gives?
My specs: CPU 2 x 2.26 GHz Quad - Core Intel Xeon,.
12 GB 1066 MHz DDR3 ECC memory.
ATI Radeon HD 4870 512 MB graphics card
AJA Kona IO Card

Ann Merci for the info, Ann. However I realized that it was just that the interface was dragged all the way upward under the white bar that says first projects.

When I saw the arrow pointing down I realized that I had to just drag the interface down. Simple mistake. Thanks again.

Patch

AIR-LAP1242AG-A-K9 cannot adhere to WLC

Guys,

I have problem, I try to connect AIR-LAP1242AG-A-K9 AP WLC 4400 with the 7.0.98.218 software, but the HA indicator is blink and always request new IP address (based on console logg AP), this device can ping from LAN but unstable (based on logg, the always AP request new IP address).

Anyone have experience with this case?

It's newspaper when I try the console to AP.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

XMODEM file system is available.

flashfs [0]: 15 files, 4 folders

flashfs [0]: 0 orphaned files, orphaned directories 0

flashfs [0]: Total number of bytes: 15998976

flashfs [0]: bytes used: 10084864

flashfs [0]: available bytes: 5914112

flashfs [0]: flashfs fsck took 36 seconds.

Basic Ethernet MAC address: 00: 1 d: 45:36:86:ca

Initialization of the ethernet port 0...

Reset the ethernet port 0...

Reset done!

upward, 100 Mbps, full-duplex Ethernet link

Ethernet port initialized 0: connection is established

Loading "flash:/c1240-k9w8-mx.124-23c.JZ/c1240-k9w8-mx.124-23c.JZ"...########################################################################################################################################################################################################################################################################################################################################################################################################################################################

'Flash:/c1240-k9w8-mx.124-23c.JZ/c1240-k9w8-mx.124-23c.JZ' file, unzipped and installed, point of entry: 0 x 3000

execution of...

Legend restricted rights

Use, duplication, or disclosure by the Government is

subject to such restrictions as set out in paragraph

(c) Commercial - limited computer software

The rights to FAR clause 52.227 - 19 and subparagraph s

(c) (1) (ii) rights to technical and computer data

Clause of DFARS 252.227 - 7013 section software.

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS software, software of C1240 (C1240-K9W8-M), Version 12.4 (23 c) JZ, RELEASE SOFTWARE (fc1)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Updated Thursday, April 6, 11 15:01 by prod_rel_team

Proceed with the initialization of the system

Proceeding to unmask interrupts

Initialization of flashfs...

flashfs [1]: 15 files, 4 folders

flashfs [1]: 0 orphaned files, orphaned directories 0

flashfs [1]: Total number of bytes: 15740928

flashfs [1]: bytes used: 10084864

flashfs [1]: available bytes: 5656064

flashfs [1]: flashfs fsck took 5 seconds.

flashfs [1]: the complete initialization... done Initializing flashfs.

Radio0 present A506 7100 E8000000 A0000000 80000000 3

Radio1 present A506 6700 E8000100 A0040000 80010000 2

This product contains cryptographic features and is under the United States

States and local laws governing the import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third party approval to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. laws and local countries. By using this product you

agree to comply with the regulations and laws in force. If you are unable

to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:

http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at

[email protected] / * /.

Cisco AIR-LAP1242AG-A-K9 (PowerPCElvis) Prozesseur (revision A0) 25590K / 7168K bytes of memory.

Card processor ID FTX1135B3ZF

PowerPCElvis CPU at 262 Mhz, revision number 0 x 0950

Last reset of tension

Image LWAPP 7.0.98.218 version

1 interface FastEthernet

2 802.11 radios

32K bytes memory simulated by flash not volatile configuration.

Basic Ethernet MAC address: xxxxxxxxxx

Part number: 73-9925-06

Kit numbered PCA: 800-26579-05

Revision number of PCA: xxxxx

Serial number of PCB: xxxxxxx

Top of page Assembly part number: xxxxxxx

Top of page the Assembly serial number: xxxxxxx

Top of page revision number: A0

Product/model number: AIR-LAP1242AG-A-K9

% Please first set a domain name.

Press RETURN to get started!

* 00:00:06.526 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed

* 00:00:08.150 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0

* 00:00:09.747 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on 1 Dot11Radio interface

* 00:00:09.863 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized AP event log (contains 1024 messages)

* 00:00:09.895 Mar 1: State of the voice_diag_test of WLC is false

* 00:00:12.004 Mar 1: % LINK-3-UPDOWN: Interface FastEthernet0, changed State to

* 00:00:12.072 Mar 1: % SYS-5-RESTART: System restarted.

Cisco IOS software, software of C1240 (C1240-K9W8-M), Version 12.4 (23 c) JZ, RELEASE SOFTWARE (fc1)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Updated Thursday, April 6, 11 15:01 by prod_rel_team

* 00:00:12.072 Mar 1: % SNMP-5-start COLD: SNMP agent on host AP001d.4536.86ca knows a cold start

* 00:00:12.154 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 00:00:12.161 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 00:00:12.161 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 00:00:12.369 Mar 1: % SSH-5-ACTIVATED: SSH 2.0 has been activated

* 00:00:13.016 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed State to

* 00:00:13.170 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 00:00:13.170 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 00:00:20.493 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 10.10.11.150, mask 255.255.255.0, hostname AP001d.xxxx.xxxx

* 00:00:30.976 Mar 1: State of the voice_diag_test of WLC is false

* 00:00:31.083 Mar 1: message logging LWAPP to 255.255.255.255.

* 00:00:34.263 Mar 1: % CDP_PD-4-POWER_OK: full power - supply NEGOTIATED online

* 00:00:34.304 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio1, changed State to

* 00:00:34.342 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

* 00:00:35.265 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 00:00:35.265 Mar 1: % SYS-6-LOGGINGHOST_STARTSTOP: logging to host started 255.255.255.255 - initiated CLI

* 00:00:35.304 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

Translate "CISCO-CAPWAP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

Translate "CISCO-LWAPP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

* 00:00:42.131 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.

* 00:00:42.135 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CAPWAP-CISCO - CONTROLLER.tester .net

* 00:00:42.139 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP - CONTROLLER.tester .net

* 00:01:32.143 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.

* 00:01:34.274 Mar 1: % CDP_PD-4-POWER_OK: full power - supply NEGOTIATED online

Not in a bound State.

* 00:01:40.659 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.

* 00:01:40.778 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 10.10.11.150, mask 255.255.255.0, hostname AP001d.xxxx.xxxx

Translate "CISCO-CAPWAP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

Translate "CISCO-LWAPP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

* 00:01:48.652 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.

* 00:01:48.655 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CAPWAP-CISCO - CONTROLLER.tester .net

* 00:01:48.657 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP - CONTROLLER.tester .net

* 00:02:28.661 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.

Not in a bound State.

* 00:02:37.173 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.

* 00:02:37.290 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 10.10.11.150, mask 255.255.255.0, hostname AP001d.xxx.xxxx

Translate "CISCO-CAPWAP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

Translate "CISCO-LWAPP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

* 00:02:45.164 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.

* 00:02:45.167 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CAPWAP-CISCO - CONTROLLER.tester .net

* 00:02:45.169 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP - CONTROLLER.tester .net

* 00:03:25.170 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.

Not in a bound State.

* 00:03:33.681 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.

* 00:03:33.798 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 10.10.11.150, mask 255.255.255.0, hostname AP001d.xxxx.xxxx

Translate "CISCO-CAPWAP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

Translate "CISCO-LWAPP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

* 00:03:41.673 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.

* 00:03:41.676 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CAPWAP-CISCO - CONTROLLER.tester .net

* 00:03:41.678 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP - CONTROLLER.tester .net

* 00:04:21.679 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.

Not in a bound State.

* 00:04:30.191 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.

* 00:04:30.308 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 10.10.11.150, mask 255.255.255.0, hostname AP001d.xxxx.xxxx

Translate "CISCO-CAPWAP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

Translate "CISCO-LWAPP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

* 00:04:38.181 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.

* 00:04:38.184 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CAPWAP-CISCO - CONTROLLER.tester .net

* 00:04:38.187 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP - CONTROLLER.tester .net

* 00:05:18.191 Mar 1: % CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP. Renew DHCP IP.

Not in a bound State.

* 00:05:26.703 Mar 1: % 3-CAPWAP-ERRORLOG: event white 38 & combination of State 2.

* 00:05:26.820 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned address DHCP 10.10.11.150, mask 255.255.255.0, hostname AP001d.xxxx.xxxx

Translate "CISCO-CAPWAP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

Translate "CISCO-LWAPP - CONTROLLER.tester .net '... the domain server (10.10.10.40)

* 00:05:34.694 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.

* 00:05:34.696 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CAPWAP-CISCO - CONTROLLER.tester .net

* 00:05:34.699 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP-CONTROL

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Thank you!!!

Hi John,.

If your WLC mgt vlan does not enable DHCP, yes you can try to manually configure an IP address like below (IP & Gateway and WLC mgt IP info that you need to change to according to your intellectual property regime). If the keyword CAPWAP does not use LWAPP keyword in the syntax of the command

LWAP #debug capwap console cli

LWAP #capwap ap 10.10.110.5 ip address 255.255.255.0

LWAP #capwap ap ip default gateway - 10.10.110.1

IP LWAP ap controller 10.10.110.10 #capwap

LWAP #debug lwapp console cli

LWAP #lwapp ap 10.10.110.5 ip address 255.255.255.0

LWAP #lwapp ap ip default gateway - 10.10.110.1

IP LWAP ap controller 10.10.110.10 #lwapp

This refer for details

http://mrncciew.com/2013/03/17/AP-registration/

Position the console AP output this time if it does not work

HTH

Rasika

Pls note all useful responses *.

1602i-e-k9 AP and WLC 5508 issue of Cisco

Dear forum participants,

I experience a problem connection Access Point 1602i-e-k9 to WLC 5508

I upack and taken an AP on the network, it appears on the WLC (monitor > all APs), I can see it using the link details for several time.

Then he desappears, restart does not help.

I searched the forum for solutions, made AP reset via command "cli rommon-like" + button "MODE" and "reset" . After that, the same thing happens again: he appears on WLC and disappears.

What I am doing wrong?

Brief info on devices and newspapers partial

Please see the full changelog of the AP attached (contains info after the reset command has been entered).

The AP Info

looking at the picture...

extracting information (283 bytes)

Image info:

Version suffix: k9w8-. 152 - 2.JB

Image name: ap1g2-k9w8 - mx.152 - 2.JB

The release directory: ap1g2-k9w8 - mx.152 - 2.JB

The iOS Image size: 9400832

Total image size: 9769472

Image device: Wireless LAN | LWAPP

Family pictures: AP1G2

Wireless switch management Version: 7.4.100.0

WLC Info

Name of the manufacturer... Cisco Systems Inc..

Product name... Cisco controller

Version of the product... 7.4.100.0

Bootloader Version... 1.0.1

Retrieving Image Version field... 6.0.182.0

Firmware version... Console USB 1.3, 1.6 Env FPGA, 1.27

Build Type....................................... DATA + WPS, LDPE

Journal of the AP

reset

[BEGIN] 20.03.2013 14:09:31

Are you sure you want to reset the system (y/n)? There

System reset...

Boot from flash

>>>>>>>>>>>>>>>>>>

"Loading Flash:/ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx"...### ".

File "flash: / ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx" unzipped and installed, point of entry: 0x100000

execution of...

>>>>>>>>>>>>>>>>>>

Software Cisco IOS, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2 (2) JB, RELEASE SOFTWARE (fc1)

>>>>>>>>>>>>>>>>>>

^

Invalid entry % detected at ' ^' marker.

no ip address of the http server

^

Invalid entry % detected at ' ^' marker.

use. Delivery of Cisco cryptographic products does not imply

third party approval to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

by default the authentication of connection

^

Invalid entry % detected at ' ^' marker.

compliance with U.S. laws and local countries. By using this product you

agree to comply with the regulations and laws in force. If you are unable

to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:

http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at

[email protected] / * /.

>>>>>>>>>>>>>>>>>>

% Please first set a domain name.

Kern of logging mechanism

^

Invalid entry % detected at ' ^' marker.

emergency logging trap

^

Invalid entry % detected at ' ^' marker.

Press RETURN to get started!

* 00:00:12.787 Mar 1: % LWAPP-3-CLIENTERRORLOG: Config flash load failed. Initialization of Cfg

* 00:00:14.047 Mar 1: % LINK-6-UPDOWN: Interface GigabitEthernet0, changed State to

* 00:00:15.059 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to

* 00:00:15.507 Mar 1: % SYS-5-RESTART: System restarted.

Software Cisco IOS, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2 (2) JB, RELEASE SOFTWARE (fc1)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Updated Wednesday, December 11, 12 04:52 by prod_rel_team

* 00:00:15.627 Mar 1: % LWAPP-3-CLIENTERRORLOG: Config flash load failed. Initialization of Cfg

* 00:00:15.631 Mar 1: % CAPWAP-3-Journal of ERROR: could not load the configuration of flash. Reset to the default configuration

* 00:00:16.671 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed to uplwapp_crypto_init: MIC present and analyzed successfully

No source of bridge-Group 1-learning

^

Invalid entry % detected at ' ^' marker.

% Without Gateway default route, if not an interface point, may affect performance

* 00:00:46.131 Mar 1: % CDP_PD-4-POWER_OK: all disabled radio - power INJECTOR_CONFIGURED_ON_SOURCE online source

* 00:00:49.411 Mar 1: DHCP-6-ADDRESS_ASSIGN %: BVI1 Interface assigned address DHCP 172.17.254.6, mask 255.255.255.0, hostname AP0006.f618.1d3b

Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (172.17.254.1)

* 00:01:00.347 Mar 1: % CAPWAP-5-DHCP_OPTION_43: the 172.17.254.203 drive address obtained by DHCP

* 00:01:00.347 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.

* 00:01:09.347 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER

* 00:01:19.347 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

looking at the picture...

extracting information (283 bytes)

Image info:

Version suffix: k9w8-. 152 - 2.JB

Image name: ap1g2-k9w8 - mx.152 - 2.JB

The release directory: ap1g2-k9w8 - mx.152 - 2.JB

The iOS Image size: 9400832

Total image size: 9769472

Image device: Wireless LAN | LWAPP

Family pictures: AP1G2

Wireless switch management Version: 7.4.100.0

Extraction of the files...

AP1G2-k9w8-MX.152-2.JB/ (directory) 0 (bytes)

extraction of ap1g2-k9w8-mx.152-2.JB/K5.bin (75790 bytes)

* 14:10:57.000 20 Mar: % CA

extraction ap1g2-k9w8-mx.152-2.JB/S2.bin (9328 bytes)

extraction of ap1g2-k9w8-mx.152-2.JB/S5.bin (106106 byte) PWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:10:57.539 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:10:57.543 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:10:57.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:10:57.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:10:57.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:10:57.543 Mar 20: % CAPWAP-3-Journal of ERROR: could not process the encrypted package capwap 172.17.254.203perform archive download capwap: / ap1g2 tar file

* 14:10:57.547 Mar 20: % CAPWAP-6-AP_IMG_DWNLD: not found required image on AP. image controller download.

extraction ap1g2-k9w8-mx.152-2.JB/info (283 bytes)

AP1G2-k9w8-MX.152-2.JB/HTML/ (directory) 0 (bytes)

AP1G2-k9w8-MX.152-2.JB/HTML/level/ (directory) 0 (bytes)

AP1G2-k9w8-MX.152-2.JB/HTML/level/1/ (directory) 0 (bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/forms.js (17492 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/appsui.js (563 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/ap_home.shtml.gz (1297 bytes)

AP1G2-k9w8-MX.152-2.JB/HTML/level/1/images/ (directory) 0 (bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/images/info.gif (399 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/images/cisco-logo-2007.gif (1648 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/images/background_web41.jpg (732 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/images/login_homeap.gif (19671 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/config.js (25507 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/sitewide.js (16554 bytes)

extraction of ap1g2-k9w8-mx.152-2.JB/html/level/1/officeExtendap.css (41801 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/1/back.shtml (512 bytes)

AP1G2-k9w8-MX.152-2.JB/HTML/level/15/ (directory) 0 (bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/15/officeExtendapBanner.htm (7114 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/15/officeExtendapConfig.shtml.gz (2864 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/15/officeExtendapSummary.htm (718 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/15/officeExtendapHelp.htm (5013 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/15/officeExtendapMain.shtml.gz (3350 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/html/level/15/officeExtendapEvent.shtml.gz (988 bytes)

extraction ap1g2-k9w8-mx.152-2.JB/K2.bin (5830 bytes)

extraction of ap1g2-k9w8-mx.152-2.JB/8005.img (200872 bytes)

extraction of ap1g2-k9w8-mx.152-2.JB/ap1g2-k9w8-mx.152-2.JB (9196955 bytes)

* 14:12:57.694 Mar 20: % 3-CAPWAP-ERRORLOG: white event 48 & combination State 10.

* 14:12:57.694 Mar 20: % 3-CAPWAP-ERRORLOG: SM Manager: failed to process the message of the timer. Event 48, State 10

* 14:12:57.694 Mar 20: % CAPWAP-3-Journal of ERRORS: do not handle the message from the timer.

* 14:12:57.694 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the message of the timer.

extraction info.ver (283 bytes)

Removal of target version: flash:/ap1g2-k9w8-mx.152-2.JB...done.

New image of the software installed in flash:/ap1g2-k9w8-mx.152-2.JB

System to use new IMA configuration

Flash event log entry: / event.log...

GE... done.

Download of archive: 212 seconds

* 14:14:28.389 Mar 20: upgrade successfully, the system image is now reloading

* 14:14:28.425 Mar 20: % SYS-5-RELOAD: reload requested by capwap image download proc. reload reason: NEW IMAGE DOWNLOAD.

* 14:14:28.425 Mar 20: % LWAPP-5-CHANGED: CAPWAP changed State to DOWN

Event.log written

Boot from flash

>>>>>>>>>>>>>>>>>>>>

WARNING: the checksum of compiling code doesn't seem to be present.

Radio0 presents 8764B 8000 0 A8000000 A8010000 0

Rate table has 180 entries (48 variations of BF IMS/72)

Radio1 present 8764B 8000 0 88000000 88010000 4

This product contains cryptographic features and is under the United States

memory checksum validate 30

^

Invalid entry % detected at ' ^' marker.

by default the authentication of connection

^

Invalid entry % detected at ' ^' marker.

>>>>>>>>>>>>>>>>>>>>

Press RETURN to get started!

* 00:00:11.995 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed

* 00:00:14.451 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0

* 00:00:14.575 Mar 1: % LINK-6-UPDOWN: Interface GigabitEthernet0, changed State to

* 00:00:15.563 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on 1 Dot11Radio interface

* 00:00:15.619 Mar 1: % LWAPP-3-CLIENTERRORLOG: Config flash load failed. Initialization of Cfg

* 00:00:18.283 Mar 1: % SYS-5-RESTART: System restarted.

Software Cisco IOS, C1600 Software (AP1G2-K9W8-M), Version 15.2 (2) JB, RELEASE SOFTWARE (fc1)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Updated Wednesday, December 11, 12 04:45 by prod_rel_team

* 00:00:18.283 Mar 1: % SNMP-5-start COLD: SNMP agent on host ap knows a cold start

* 00:00:18.339 Mar 1: % LWAPP-3-CLIENTERRORLOG: Config flash load failed. Initialization of Cfg

* 00:00:18.339 Mar 1: % CAPWAP-3-Journal of ERROR: could not load the configuration of flash. Reset to the default configuration

* 00:00:18.355 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 00:00:18.355 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 00:00:18.819 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to

* 00:00:19.439 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed State to

* 00:00:21.699 Mar 1: % SSH-5-ACTIVATED: SSH 2.0 has been enabledlwapp_crypto_init: MIC present and analyzed successfully

% Without Gateway default route, if not an interface point, may affect performance

* 00:00:47.127 Mar 1: message logging LWAPP to 255.255.255.255.

* 00:00:52.059 Mar 1: % CDP_PD-4-POWER_OK: full power - supply line INJECTOR_CONFIGURED_ON_SOURCE

* 00:00:53.107 Mar 1: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 00:00:54.031 Mar 1: DHCP-6-ADDRESS_ASSIGN %: BVI1 Interface assigned address DHCP 172.17.254.7, mask 255.255.255.0, hostname AP0006.f618.1d3b

* 00:00:54.107 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 00:00:54.163 Mar 1: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 00:00:55.163 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (172.17.254.1)

* 00:01:04.927 Mar 1: % CAPWAP-5-DHCP_OPTION_43: the 172.17.254.203 drive address obtained by DHCP

* 00:01:04.927 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.

* 00:01:13.927 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER

* 00:01:23.927 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:16:30.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:16:30.539 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:16:30.539 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:16:30.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:16:30.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:16:30.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:16:30.543 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:16:49.211 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:16:49.211 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:16:49.211 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:16:49.267 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:16:49.287 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:16:49.287 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:16:49.303 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:16:49.343 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:16:50.287 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:16:50.335 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:16:50.343 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:16:51.327 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:16:51.335 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:16:51.379 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:16:51.387 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:16:51.395 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:16:52.379 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:16:52.387 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:16:52.423 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:16:53.423 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:16:59.343 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:16:59.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:16:59.539 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:16:59.539 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:16:59.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:16:59.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:16:59.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:16:59.543 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:17:17.699 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:17:17.699 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:17:17.699 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:17:17.755 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:17:17.771 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:17:17.771 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:17:17.783 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:17:17.819 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:17:18.771 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:17:18.819 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:17:18.827 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:17:19.811 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:17:19.819 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:17:19.863 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:17:19.871 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:17:19.879 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:17:20.863 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:17:20.871 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:17:20.907 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:17:21.907 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:17:27.819 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:17:28.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:17:28.539 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:17:28.539 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:17:28.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:17:28.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:17:28.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:17:28.543 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:17:47.203 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:17:47.203 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:17:47.203 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:17:47.259 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:17:47.275 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:17:47.275 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:17:47.287 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:17:47.323 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:17:48.275 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:17:48.323 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:17:48.331 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:17:49.315 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:17:49.323 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:17:49.367 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:17:49.375 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:17:49.383 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:17:50.367 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:17:50.375 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:17:50.411 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:17:51.411 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:17:57.323 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:17:57.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:17:57.543 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:17:57.543 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:17:57.547 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:17:57.547 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:17:57.547 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:17:57.547 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:18:15.699 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:18:15.699 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:18:15.699 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:18:15.755 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:18:15.771 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:18:15.771 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:18:15.799 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:18:15.831 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:18:16.771 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:18:16.835 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:18:16.843 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:18:17.827 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:18:17.835 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:18:17.879 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:18:17.887 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:18:17.895 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:18:18.879 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:18:18.887 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:18:18.923 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:18:19.923 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:18:25.831 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:18:26.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:18:26.543 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:18:26.543 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:18:26.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:18:26.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:18:26.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:18:26.543 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:18:44.699 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:18:44.699 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:18:44.699 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:18:45.163 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:18:45.183 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:18:45.183 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:18:45.195 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:18:45.227 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:18:46.183 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:18:46.231 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:18:46.239 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:18:47.223 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:18:47.231 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:18:47.275 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:18:47.283 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:18:47.291 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:18:48.275 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:18:48.283 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:18:48.319 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:18:49.319 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:18:55.227 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:18:55.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:18:55.543 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:18:55.543 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:18:55.547 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:18:55.547 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:18:55.547 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:18:55.547 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:19:13.695 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:19:13.695 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:19:13.695 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:19:13.751 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:19:13.767 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:19:13.767 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:19:13.783 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:19:13.815 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:19:14.767 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:19:14.827 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:19:14.835 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:19:15.819 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:19:15.827 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:19:15.871 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:19:15.879 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:19:15.887 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:19:16.871 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:19:16.879 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:19:16.915 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:19:17.915 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:19:23.815 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:19:24.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:19:24.539 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:19:24.543 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:19:24.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:19:24.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:19:24.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:19:24.543 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:19:42.695 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:19:42.695 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:19:42.695 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:19:42.751 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:19:42.767 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:19:42.767 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:19:42.783 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:19:42.815 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:19:43.767 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:19:43.815 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:19:43.823 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:19:44.807 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:19:44.815 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:19:44.859 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:19:44.867 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:19:44.875 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:19:45.859 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:19:45.867 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:19:45.903 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:19:46.903 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:19:52.815 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:19:53.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:19:53.543 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:19:53.543 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:19:53.547 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:19:53.547 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:19:53.547 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:19:53.547 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:20:12.111 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:20:12.111 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:20:12.111 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:20:12.167 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:20:12.183 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:20:12.183 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:20:12.199 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:20:12.231 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:20:13.183 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:20:13.235 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:20:13.243 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:20:14.227 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:20:14.235 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:20:14.279 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:20:14.287 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:20:14.295 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:20:15.279 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:20:15.287 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:20:15.323 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:20:16.323 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:20:22.231 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:20:22.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:20:22.543 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:20:22.543 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:20:22.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:20:22.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:20:22.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:20:22.543 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:20:40.699 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:20:40.699 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:20:40.699 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:20:40.755 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:20:40.771 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:20:40.771 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:20:40.787 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:20:40.819 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:20:41.771 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:20:41.819 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:20:41.827 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:20:42.811 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:20:42.819 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:20:42.863 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:20:42.871 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:20:42.879 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:20:43.863 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:20:43.871 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:20:43.907 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:20:44.907 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:20:50.819 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:20:51.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:20:51.539 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:20:51.539 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:20:51.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:20:51.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:20:51.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:20:51.543 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

* 14:21:10.107 Mar 20: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (UNKNOWN_MESSAGE_TYPE (5))

., 1)

* 14:21:10.107 20 Mar: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

* 14:21:10.107 Mar 20: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.17.254.203:5246

* 14:21:10.163 Mar 20: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

* 14:21:10.179 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 14:21:10.179 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

* 14:21:10.191 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:21:10.227 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:21:11.179 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:21:11.227 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down

* 14:21:11.235 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset

* 14:21:12.219 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:21:12.227 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down

* 14:21:12.271 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to

* 14:21:12.279 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down

* 14:21:12.287 Mar 20: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 14:21:13.271 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

* 14:21:13.279 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 14:21:13.315 Mar 20: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to

* 14:21:14.315 Mar 20: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 14:21:20.227 Mar 20: % 3-CAPWAP-ERRORLOG: go join a capwap controller

* 14:21:20.000 Mar 20: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.254.203 peer_port: 5246

* 14:21:20.539 Mar 20: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.17.254.203 peer_port: 5246

* 14:21:20.539 Mar 20: % CAPWAP-5-SENDJOIN: send request to join 172.17.254.203

* 14:21:20.543 Mar 20: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.

* 14:21:20.543 Mar 20: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.

* 14:21:20.543 Mar 20: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller

* 14:21:20.543 Mar 20: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 172.17.254.203 capwap

[END] 20.03.2013 14:21:55

Azim,

I wonder if the regulatory domain of the AP is correct.

Please provide the result following (authorization according to Leo)

1 WLC: sh sysinfo

2 PA: sh version

3 PA: HS inventory

Thank you.

Amjad

Rating of useful answers is more useful to say "thank you".

Cisco Aironet 1262N stuck during the startup process

I'm banging my head against the wall, trying to figure out why my AIR-AP1262N-A-K9 will start all the way. He'll get all the way to initiate interfaces and stop. I can never get to control the CLI. This is my first time with a cisco ap but everything I read it very easy sewing.

This unit from what I understand will work on its own with no controller. Therefore, it is called a "stand-alone" model Yet he seems to be looking for something to complete during the boot. Below the out put for starting. The last line is where it stops.

If anyone can help me I would be very happy.

WRDTR, CLKTR r: 0x8200083f 0x40000000
r RQDC, RFDC: 0 x 80000033 0 x 00000212

using the values from the eeprom

WRDTR, CLKTR: 0X8200083F 0X40000000
RQDC, RFDC: 0 X 80000033 0 X 00000212

MCNG ddr static values of the eeprom series
init done DDR

IOS Bootloader - start System.
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......
XMODEM file system is available.

DDR used values of the system serial eeprom.
WRDTR, CLKTR: 0X8200083F, 0X40000000
RQDC, RFDC: 0 X 80000033, 0 X 00000212

PCIE0: the connection is established.
PCIE0: VC0 is active
PCIE1: the connection is established.
PCIE1: VC0 is active
PCIE 64-bit devices
PCIEx: initialization done
flashfs [0]: 147 files, 7 folders
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 31739904
flashfs [0]: bytes used: 6435328
flashfs [0]: available bytes: 25304576
flashfs [0]: flashfs fsck took 9 seconds.
The system eeprom read cookie series... Fact
MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.
Error: Speed RGMII

The system has encountered an error during initialization
the Ethernet port.
The system is ignoring the error and continue to start.
If you stop the system startup process, what follows
orders will be re - initialize Ethernet, TFTP and finishing
loading the operating system software:

ether_init
tftp_init
boot

for 22 seconds
process_config_recovery: set the IP address and the default config 10.0.0.1
process_config_recovery: image recovery

PA:
WRDTR, CLKTR r: 0x8200083f 0x40000000
r RQDC, RFDC: 0 x 80000033 0 x 00000212

using the values from the eeprom

WRDTR, CLKTR: 0X8200083F 0X40000000
RQDC, RFDC: 0 X 80000033 0 X 00000212

MCNG ddr static values of the eeprom series
init done DDR

Normal running Memtest...
Past.
IOS Bootloader - start System.
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......
XMODEM file system is available.

DDR used values of the system serial eeprom.
WRDTR, CLKTR: 0X8200083F, 0X40000000
RQDC, RFDC: 0 X 80000033, 0 X 00000212

PCIE0: the connection is established.
PCIE0: VC0 is active
PCIE1: the connection is established.
PCIE1: VC0 is active
PCIE 64-bit devices
PCIEx: initialization done
flashfs [0]: 147 files, 7 folders
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 31739904
flashfs [0]: bytes used: 6435328
flashfs [0]: available bytes: 25304576
flashfs [0]: flashfs fsck took 9 seconds.
The system eeprom read cookie series... Fact
MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.
Error: Speed RGMII

The system has encountered an error during initialization
the Ethernet port.
The system is ignoring the error and continue to start.
If you stop the system startup process, what follows
orders will be re - initialize Ethernet, TFTP and finishing
loading the operating system software:

ether_init
tftp_init
boot

"Loading Flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1"...### ".
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
###############################################################################

File "flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1" uncompressed one
ND installed, point of entry: 0x4000
execution of...
ENET stopped

Legend restricted rights

Use, duplication, or disclosure by the Government is
subject to such restrictions as set out in paragraph
(c) Commercial - limited computer software
The rights to FAR clause 52.227 - 19 and subparagraph s
(c) (1) (ii) rights to technical and computer data
Clause of DFARS 252.227 - 7013 section software.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Friday, August 11, 11 02:07 by prod_rel_team

Proceed with the initialization of the system

Proceeding to unmask interrupts
Initialization of flashfs...
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......

flashfs [1]: 147 files, 7 folders
flashfs [1]: 0 orphaned files, orphaned directories 0
flashfs [1]: Total number of bytes: 31481856
flashfs [1]: bytes used: 6435328
flashfs [1]: available bytes: 25046528
flashfs [1]: flashfs fsck took 7 seconds.
flashfs [1]: initialization complete.
flashfs [2]: 0 files, directories 1
flashfs [2]: 0 orphaned files, orphaned directories 0
flashfs [2]: Total number of bytes: 11999232
flashfs [2]: used bytes: 1024
flashfs [2]: available bytes: 11998208
flashfs [2]: fsck flashfs took 1 seconds.
flashfs [2]: initialization complete... done Initializing flashfs.

Radio0 presents 8364B 8000 B8020000 0 B8030000 10
Present Radio1 8364B 8000 B0020000 0 B0030000 C
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.

This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at
[email protected] / * /.

processor of Cisco AIR-AP1262N-A-K9 (PowerPC460exr) (revision B0) with 81910 K/4
9152K bytes of memory.
Card processor ID FTX1716E2DN
PowerPC460exr CPU 666 Mhz, the 0x18A8 revision number
Last reset of tension
1 gigabit Ethernet interface
2 802.11 radios

32K bytes memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: 7 c: AD:74:93:36:BA
Part number: 73-12175-06
Kit numbered PCA: 800-32268-06
Revision number of PCA: B0
Serial number of PCB: FOC17106662
Top Assembly part number: 800-33866-02
Top of page the Assembly serial number: FTX1716E2DN
Top of page revision number: A0
Product/model number: AIR-AP1262N-A-K9

Press RETURN to get started!

* 00:00:09.481 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS t auto
is spent
* 00:00:09.490 Mar 1: * CRASH_LOG = YES

* 00:00:09.490 Mar 1: PCIE 64-bit devices
* 1 Mar 00:00:09.789: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
n level 4
* 1 Mar 00:00:10.088: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
n level 4
* 00:00:12.966 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
test successful Dot11Radio interface 0
* 00:00:15.649 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
test successful 1Base Dot11Radio interface Ethernet MAC address: 7 c: AD:74:93:36:
BA

* 00:00:56.377 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
up to
up to
ernet0, changed state down
* 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio1, changed state of a
dministratively down
* 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state of a
dministratively down
* 00:11:00.003 Mar 1: % CDP_PD-4-POWER_OK: full power - AC_ADAPTOR inline power s
ource
* 00:11:00.012 Mar 1: % SYS-5-RESTART: System restarted.
Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Friday, August 11, 11 02:07 by prod_rel_team
* 00:11:00.012 Mar 1: % SNMP-5-start COLD: SNMP agent on host ap undergoes a c
old beginning
* 00:11:00.994 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
State of GED until
* 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed down state
* 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed down state
* 00:11:11.956 Mar 1: % LINK-3-UPDOWN: Interface BVI1, changed State to down
* 00:11:12.957 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
State of GOL downstairs

What are your settings of the nec console?

You must be 9600, none, 8, 1 and flow controll set off to be able to interact with the CLI

HTH,
Steve

------------------------------------------------------------------------------------------------
Please don't forget to rate helpful messages and mark the questions answers

Cisco AIR-LAP1041N-E-K9 does not not with WLC 4402 version 7.0.116.0

Hi all

appreciate your support for a problem I started to deal with today. I have a Cisco WLC 4402 running the 7.0.116.0 version and it's great to work with 25 Cisco 1252 access points. We received a new 20 Cisco 1041N APs today and I installed one in our site, but it does not work. He well worked and loaded the flash image and obtained WLC ip through DHCP option address and began to show the below error:

* 00:00:10.021 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed

* 00:00:10.033 Mar 1: * CRASH_LOG = YES

* 00:00:10.333 Mar 1: 1 Port is not presentSecurity base.

MAC Ethernet address of base: C8:9 C: 1 D: 53:57:5E

* 00:00:11.373 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0

* 00:00:11.465 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized AP event log (contains, 1088 messages)

* 00:00:11.494 Mar 1: State of the voice_diag_test of WLC is false

* 00:00:12.526 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to

* 00:00:13.594 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to

* 00:00:13.647 Mar 1: % SYS-5-RESTART: System restarted.

Cisco IOS software, software C1040 (C1140-K9W8-M), Version 12.4 (23 c) JA2, VERSION of the SOFTWARE (fc3)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Updated Thursday, April 13, 11 12:50 by prod_rel_team

* 00:00:13.647 Mar 1: % SNMP-5-start COLD: SNMP agent on host APc89c.1d53.575e knows a cold start

* 00:08:59.062 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 1 Mar 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio

* 00:08:59.138 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 00:08:59.837 Mar 1: % SSH-5-ACTIVATED: SSH 2.0 has been activated

* 00:09:00.145 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

* 00:09:09.136 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e

* 00:09:17.912 Mar 1: % PARSER-4-BADCFG: unexpected end of the configuration file.

* 00:09:17.912 Mar 1: State of the voice_diag_test of WLC is false

* 00:09:17.984 Mar 1: message logging LWAPP to 255.255.255.255.

* 00:09:19.865 Mar 1: % CDP_PD-4-POWER_OK: full power - supply NEGOTIATED online

* 00:09:19.886 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

* 00:09:20.873 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

* 00:09:20.874 Mar 1: % SYS-6-LOGGINGHOST_STARTSTOP: logging to host started 255.255.255.255 - initiated CLI

Translate "CISCO-CAPWAP - CONTROLLER.atheertele.com"... the domain server (172.16.40.240)

* 00:09:29.029 Mar 1: % CAPWAP-5-DHCP_OPTION_43: the 172.16.100.102 drive address obtained by DHCP

* 08:27:02.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:02.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

* 08:27:03.175 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:03.177 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

* 08:27:03.177 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

* 08:27:03.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

* 08:27:03.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

* 25 May 08:27:03.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

* 08:27:03.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

* 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 25 May 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio

* 25 May 08:27:03.448: State of the voice_diag_test of WLC is false

* 08:27:14.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:14.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

* 08:27:15.185 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:15.186 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

* 08:27:15.186 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

* 08:27:15.330 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

* 08:27:15.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

* 25 May 08:27:15.334: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

* 08:27:15.334 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

* 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 25 May 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio

* 25 May 08:27:15.450: State of the voice_diag_test of WLC is false

* 08:27:26.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:26.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

* 08:27:27.182 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:27.183 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

* 08:27:27.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

* 08:27:27.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

* 08:27:27.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

* 25 May 08:27:27.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

* 08:27:27.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

* 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 25 May 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio

* 08:27:27.433 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 08:27:27.446 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.

* 25 May 08:27:27.447: State of the voice_diag_test of WLC is false

* 08:27:27.448 may 25: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

* 08:27:27.456 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

* 08:27:38.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:38.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

* 08:27:39.183 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:39.184 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

* 08:27:39.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

* 08:27:39.326 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

* 08:27:39.329 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

* 25 May 08:27:39.329: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

* 08:27:39.330 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

* 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 25 May 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio

* 25 May 08:27:39.446: State of the voice_diag_test of WLC is false

* 08:27:49.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:49.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

* 08:27:50.179 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

* 08:27:50.180 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

* 08:27:50.180 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

* 08:27:50.323 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

* 08:27:50.326 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

* 25 May 08:27:50.326: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

* 08:27:50.326 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

* 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

* 25 May 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio

* 08:27:50.425 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

* 08:27:50.438 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.

I searched the difference in regulatory areas between AIR-LAP1041N -E- K9 and AIR-LAP1041N -A- K9 and no difference was found which may affect the operation of this access point.

to cite our WLC configuration for regulatory areas is:

Country set AR codes

Area of regulation 802. 11A:-A

802.11bg:-a

My question is should I just include my country in the WLC (IQ) add the field of requlatry (-E) to solve this problem? or change the country will affect the operation of all APs workers?

Appreciate your kind support,

Patrick Q.

Try adding a European country to your regulatory domain.

Guest never appears in a 2602i access point

Hello:

Today, I converted an access point AIR-CAP2602I-A-K9 to stand-alone using the mode button/tftp, but any IOS Installer (I tried 2 other IOS and also tried to enter Rommon - I am able to change IOS because that the procedure I used is a not any command), I never get to see the prompt so that I can introduce commands to configure the AP. It's as if it hangs after initialization "successfully."

The only thing I see all the time is the 'normal' console messages, and it displays no error message at all. It happened before the downgrade.

That's where stops the PA, but it is not really hung up because the console messages could keep appearing. He simply never gets the PROMT so I can enter a few commands. Not same acept would come.

Cisco IOS software, software C2600 (AP3G2-K9W7-M), Version 15.2 (4) JA1, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Updated Wednesday, July 30, 13 23:12 by prod_rel_team

Initialization of flashfs...

flashfs [3]: 200 files, 7 folders
flashfs [3]: 0 orphaned files, orphaned directories 0
flashfs [3]: Total number of bytes: 31739904
flashfs [3]: bytes used: 14286848
flashfs [3]: available bytes: 17453056
flashfs [3]: flashfs fsck took 9 seconds.
flashfs [3]: initialization complete.
flashfs [4]: 0 files, directories 1
flashfs [4]: 0 orphaned files, orphaned directories 0
flashfs [4]: Total number of bytes: 11999232
flashfs [4]: used bytes: 1024
flashfs [4]: available bytes: 11998208
flashfs [4]: fsck flashfs took 0 seconds.
flashfs [4]: initialization complete.
Copy of the radio flash files: RAM:
Current copy... CARTER
Current copy... CCC
Current copy... CCBC
Current copy... CCBC
Current copy... CC
Decompression of files radio...
.. initialization flashfs .done.

Radio0 presents 8764 8000 0 A8000000 A8010000 0
Rate table has 244 entries (IMS/104 BF 64 variants)

Radio1 present 8764 8000 0 88000000 88010000 4
This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at
[email protected] / * /.

Cisco AIR-SAP2602I-A-K9 (PowerPC) Prozesseur (revision A0) 180214K / 81920K bytes of memory.
Card processor ID FGL1716S0Q6
PowerPC CPU at 800 Mhz, the revision number 0 x 2151
Last reset of tension
1 gigabit Ethernet interface
2 802.11 radios

32K bytes memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: BC:16:65:95:A7:C3
Part number: 73-14588-02
Kit numbered PCA: 800-37899-01
Revision number of PCA: A0
Serial number of PCB: FOC17151DSW
Top Assembly part number: 800-38356-01
Top of page the Assembly serial number: FGL1716S0Q6
Top of page revision number: A0
Product/model number: AIR-CAP2602I-A-K9

Press RETURN to get started!

* 00:00:11.819 Mar 1: % IFMGR-7-NO_IFINDEX_FILE: could not open the nvram: / ifIndex-table no such file or directory
* 00:00:11.935 Mar 1: FIPS IOS Image Checksum successful test
* 00:00:11.935 Mar 1: FIPS IOS test Crypto RNG DEK key to success
* 00:00:11.939 Mar 1: FIPS IOS SHA-1 successfully test
* 00:00:11.939 Mar 1: test of FIPS IOS HMAC-SHA1 successful
* 00:00:11.939 Mar 1: test FIPS IOS CBC AES 128bits successful Encrypt
* 00:00:11.939 Mar 1: test FIPS IOS CBC AES 128bits successful Decrypt
* 00:00:11.939 Mar 1: test FIPS IOS IOS AES CMAC encrypt successful
* 00:00:11.939 Mar 1: test of FIPS IOS IOS CCM encrypt successful
* 00:00:11.939 Mar 1: test of FIPS IOS IOS CCM decipher successful
* 00:00:11.939 Mar 1: test FIPS IOS successful RSA Signature generation
* 00:00:11.939 Mar 1: FIPS IOS test with success the RSA Signature verification
* 00:00:11.939 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed
* 00:00:18.863 Mar 1: test RADIO FIPS AES 128-bit encrypt for TX on Dot11Radio successful 0
* 00:00:18.863 Mar 1: test RADIO FIPS AES 128-bit CCM encrypt on Dot11Radio successful 0
* 00:00:18.863 Mar 1: RADIO FIPS test AES 128-bit CCM decrypt on Dot11Radio successful 0
* 00:00:18.863 Mar 1: test RADIO AMAC AES FIPS encrypted 128-bit CMAC on Dot11Radio successful 0
* 00:00:18.863 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0
* 00:00:24.991 Mar 1: test RADIO FIPS AES 128-bit encrypt for TX on Dot11Radio 1 successfully
* 00:00:24.991 Mar 1: test RADIO FIPS AES 128-bit CCM encrypt Dot11Radio 1 successfully
* 00:00:24.991 Mar 1: RADIO FIPS test AES 128-bit CCM decrypt on Dot11Radio 1 successfully
* 00:00:24.991 Mar 1: test RADIO FIPS AMAC AES 128-bit CMAC encrypt Dot11Radio 1 successfully
* 00:00:24.991 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on 1 Dot11Radio interface
* 00:00:25.007 Mar 1: initializing dot11 onplus
* 00:00:25.259 Mar 1: not pΘriphΘrique active autoconfig!
* 00:00:27.039 Mar 1: % LINK-6-UPDOWN: Interface GigabitEthernet0, changed State to
* 00:00:28.039 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, state change downstairs
* 00:01:13.383 Mar 1: "Promiscuous" from Ethernet mode
* 07:12:42.000 Apr 12: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 07:12:42.000 Apr 12: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively
* 12 Apr 07:12:42.003: % CDP_PD-4-POWER_OK: full power - supply line AC_ADAPTOR
* 07:12:42.011 Apr 12: % SYS-5-RESTART: System restarted.
Cisco IOS software, software C2600 (AP3G2-K9W7-M), Version 15.2 (4) JA1, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Updated Wednesday, July 30, 13 23:12 by prod_rel_team
* 07:12:42.011 Apr 12: % SNMP-5-start COLD: SNMP agent on host ap knows a cold start
* 07:12:42.991 Apr 12: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed State to
* 07:12:42.999 Apr 12: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 07:12:42.999 Apr 12: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 12 Apr 07:12:44.651: % SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: crypto HW FIPS self-test passed
* 07:12:44.651 Apr 12: ACCA complete initialization
* 07:12:44.651 Apr 12: % SYS-3-HARIKARI: first level of ACCA INIT process routine is out
* 07:12:44.971 Apr 12: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to<--- cursor="" stops="" here="" and="" won't="" accept="" enter="" or="" any="" other ="" keyboard="">

Any thoughts?

Best regards and thanks in advance

Are you sure that you have turned off the flow control settings?

Cisco SGE2010P LAG in access or trunk mode?

Hello.

I have a client who has two SGE2010P connected by four LAG ports.

Switch has all the users, and B a whole server. All used on the vlan 1.

Now I had to add the point with multiple SSID access.

Here the port I created trunk port since the AP had to pass several tag/no identified images.

So now the two trunk vlan is spent. One is the vlan 1 and other native vlan 2 for the wireless of comments.

If I were to set up access to this port, the AP Gets the ip address of the DHCP server on the other switch.

When I set up the trunk, the gi0.1, which is part of the vlan native Gets the ip address.

However, the Gi0.2 interface, which is part of the vlan 2 does not get an ip address.

When I put the port vlan 2 access mode and got the AP to be in this vlan.

I was able to get the ip address on the scope of vlan2. It's only when I set up the trunk port.

the vlan 2 (not native vlan) does not get an ip address.

So I think it is, maybe the LAG port is in access mode in the vlan 1 and not in trunk mode.

Is it possible to change the port of OFFSET to be in trunk mode?

Thank you in advance.

Hi Thomas, that there should be "M1" in the list of the interface down. Or some channel port that you assigned. As an OFFSET, these ports are more specific. It works exactly the same in a catalyst environment, difference is, it's on a GUI config vs a CLI config.

-Tom
Please mark replied messages useful

Dot11radio interface down

Similar Questions

Maybe you are looking for