dot1x system-auth-control on 62xx and all port/traffic goes down?
Hello
with three VLANS, and now presenting only certain ports that I do the dot1x:
RD (config) #dot1x # system - auth - control enable
RD (config) #aaa authentication dot1x default # spot within a RADIUS to RADIUS
RD (config) #interface ethernet 1/g1 # bind it to a port
RD #dot1x (config-if-1/g1) auto # config dot1x port-control
I assumed dot1x must be forced/enabled on port/int per basis and before it's done there's no dot1x, but it seems that - dot1x system-auth-control - does not wait for anything and everything stops instantly.
Is this desired behavior?
And if yes then how introduced little by little dot1x, looking fixedly with an ethernet port that are configured as here:
1/g1
Flow control: enabled
Port: g1/1
Belonging to a VLAN: access mode Mode
Operating parameters:
PVID: 1
Capture filtering: enabled
Acceptable frame type: no label
Default priority: 0
GVRP status: Disabled
Protected: disabled
-Other - or ITU (q)
Port 1/g1 is a member of:
Rule of VLAN name evacuation Type
---- --------------------------------- ----------- --------
1 by default not marked by default
Static configuration:
PVID: 1
Capture filtering: enabled
Acceptable frame type: no label
Port 1/g1 is configured statically:
Output name rule of VLAN
---- --------------------------------- -----------
Prohibition of VLAN:
Name of VLAN
---- ---------------------------------
A lot! Thank you
L.
OK, you can implement other dot1x controls without having them no effect on the switch until the "dot1x system-auth-control' is given.
I will certainly take a look at your other post.
Tags: Dell Switches
Similar Questions
-
When windows update is running on my machine (and updates), my screen goes down to 1024 x 768. I have a HD card of ATI all-in - Wonder and an Acer X203H LCD with DVI connection. If I use system restore to go back, I can get higher resolutions, but Windows does its thing and I'm back at low resolution. I can't change the settings manually as 1024 watch as the highest res available to the general public when this happens. There must be some weird conflicts. I tried to update the drivers, that made no difference. Is there a setting Aero or the conflict at stake here? In the past, I've had trouble with a display of balnk and I had to go back to the 2008 version of the driver to get things to work. From there, whenever I update, I can keep high resolution, but after the last windows update (security of IE8 and much smaller pack that was released on March 28-30), it dates back to 1024 x 768 again. Control Panel and catalyst control the two show that as more high resolution available for refresh rate. Suggestions?
Change your update settings to find the problem, we > then right-click on > hide.
And don't do hardware drivers through Windows updates.
Find them in the equipment or the system direct manufacturer.
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understanding Windows Update and Extras in Windows Vista
Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
See Update above settings to solve this problem
See you soon.
Mick Murphy - Microsoft partner
-
Installed system mechanic on the HP Pavilion.
Sorry I posted this problem so soon. I found the answer, when I used bing to search for this problem. No need to answer now. My screen is upright and I don't have to use the monitor upside down! This forum of love.
-
How to completely uninstall autofil suggestions and all of the drop downs and bookmarks.
You should know that I followed the instructions canned. History of compensation is clearly misspelled web address nor the list of old bookmarks that go down. Example: walmartmoaneycard.com. instead of walmartmoneycard.com.
Another: 192.168.01 instead of 192.168.0.1.
Are there files I can delete completely?
Second, is there a file to remove the bookmarks drop-down without losing them as a book mark.
Is it necessary to remove the from the drop-down list at the same time? I have a lot of these, and some that no longer exists.You may have switched to the keyboard navigation.
You can activate or switch by pressing F7 keyboard navigation (Mac: fn + F7).
- Tools > Options > advanced > general > accessibility: [] "always use the cursor keys to navigate through the pages."
Note that this is a function of Firefox Accessibility.
- http://KB.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
- http://KB.mozillazine.org/Accessibility_features_of_Firefox
To retrieve the bookmark favicons, you must visit a bookmark to retrieve the favicon or use a Firefox extension.
- Restorer of favicon: https://addons.mozilla.org/firefox/addon/favicon-restorer/
-
I hope someone can help LiveChat not working.
See the links provided. There are detailed instructions on how to do it.
If you cannot follow these instructions please try chat
-
Can't get msn hompage to come? put in all the controls of ssl and TLS]
I can't get the page of Msn to come home today. I just went into tools and changed security to check the mark on all controls of tsl and ssl, instead
the STL 3 and ssl 2? This does not work either, any suggestions?
Hello Elizabeth,.
1 did you change on your computer before the show?
2. what version of Internet Explorer is installed on your computer?
3. which version of the operating system is installed on your computer?
4. have you tried to open another web browser MSN?
I suggest you to add MSN to trusted sites and then check if you are able to open it.
Check out these links to add Web sites to the trusted sites.
-
I had the virus 'file system' and ran the Microsoft Essentials who kidnapped... Then the screen turned grat and all my tyop desktop icons disappeared and my files... I tried to use the restore but it wouldn't return back or in SafeMode... also, I get a notice that the Task Manager is disabled? How can I turn back?
Hi David McGeady.
· You are able to open in safe mode Task Manager?
Follow these methods.
Method 1: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 2: It seems that the virus is still there. Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.
Method 3: Create a new user account.
How to create and configure user accounts in Windows XP
http://support.Microsoft.com/kb/279783
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
How to copy data from a corrupted to a new profile in Windows XP user profile
-
Original title: I lost the office and all programs-system restore won't work
I don't know what happened, now all I have is a blue screen, if I click on programs it says 'empty' can not get on anything
Hello
1. what exactly happens when you try to perform the system restore? If you receive an error message then, send the same return.
2 have you made changes on the computer before this problem?
Please answer these questions and to provide more specific information on the issue. This could help us help you better.
The following articles could be useful.
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
http://support.Microsoft.com/kb/318027
When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
http://support.Microsoft.com/kb/941248 -
ICAN can't get my windows xp help and surport to run when I go to him, he told me surport and help is not running and I have to start Help and surport where ido, I start this program tried to find in Control Panel and all proograms until I do
Restore help and Support Service (line 235 left) - http://www.kellys-korner-xp.com/xp_tweaks.htm help repair Windows XP and Support - http://www.dougknox.com/xp/scripts_desc/fixwinxphelp.htm
"Help and Support" link from the Menu start does not work - http://windowsxp.mvps.org/startmenuhelp.htm
Solving problems with Help and Support Center - http://windowsxp.mvps.org/helpctr.htm
MS - MVP - Elephant Boy computers - don't panic! -
The HD to SSDS: how to restore the system and all the drivers?
Hello
I changed the HDD with a SSD. Now I want to restore the system (Windows 8) and all the drivers and applications. To do this I use (with DVD) HP Recovery Manager and I choose to install a clean install of the system, drivers and applications. After the copy of the set in the new hd, when the computer is reset, I get the message that there is no system in my HD!
Why? What can I do?Thank you
Enter the BIOS
Go to the tab system set
Scroll Startup Options
Go to boot order
Move the current SSD as the first device by following the instructions in the right pane
After making changes to the boot order, press F10 and click Yes to save the changes and then exit from BIOS -
I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone
Try this to rebuild icons: -.
Open the command prompt as administrator and copy and paste each command and press ENTER after each command:-
- Taskkill /IM explorer.exe/f
- CD /d %userprofile%\AppData\Local
- DEL /a IconCache.db
- Shutdown /r
-
Original title: clicking on but nothing happens
When I select "backup and Restore Center', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel, nothing happens. Sometimes a window flashes for a split second before disappearing. Any suggestions?
Hi Ron68PB,
1. you remember to make changes to the computer before this problem?
2 are you able to open other programs?
3. do you get error messages or error codes?
Method 1:
You try to run a SFC scan to check the corrupted system files.
You can read the following article to launch the SFC scan:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Alternatively, you can try to check if the problem occurs in safe mode.
Check out the link:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
-
I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?
* original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.
Hi jsserrano68,
Read the following article about the product keys for Windows:
In addition, if you need to contact Toshiba support:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true
Thank you
Deb
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Order for the properties of system in Control Panel (and not the page sysdm.cpl)
I'm looking for the command to run to open this page. I don't know what this page other than the properties of system in Control Panel is called and each search using this name returns hits for sysdm.cpl which is the 'XP version ' of the system properties page. Anyone know?
You can use the Windows key + Pause/Break
-
IM on windows 7 and on the 19/11/2011 i got a virus and it erased all my data off of the pc also restore points system and all backup and resrtore removed points ive used many recovery programs installed on usb drives and they say all my files are damnaged how to restore all my files to the previous locations without them being damaged for example mp3 video & images
Hello
If the files are deleted, then you will need to use any third party recovery software to recover files.
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope the helps of information.
Maybe you are looking for
-
Computer laptop cracked screen sent for warranty repairs!
I recently had my laptop that is only two months old (Qomisio X 10 500 t) sent back to Toshiba for repair of the fingerprint reader. When the left laptop was in perfect condition and not a top scratch. having paid £1,500 for it I was very careful to
-
Re: Protected M100: Configfree connects automatically matched pair
I have solved my problems of driver wlan and can acquire a connection of my M100 protégé. However, with configfree I see all my local wireless networks on the virtual radar/map, including mine, but I can't choose which one I want to connect to and co
-
I can't set up a new account with T-Mobile 4G
I have recently buy a slate of 10 HD 3600 us with Android JellyBean and I was just the initial game upward. Instructions to set up a new account 4G with T-Mobile seem simple enough in the tutorial:http://WWW8.HP.com/us/en/ads/free-mobility/overview.h
-
I can't dual boot my PC pre-installed Windows 7 with Windows XP?
I created a primary partition on my Windows 7 PC preinstalled in freeing up space. When I start my PC the Windows XP installation CD, Windows XP will in the usual configuration process by displaying the F6 option on the screen blue etc and it unloads
-
I ordered and paid Photoshop element four days ago, and I was told that the order must be processed within 24 hours. It is still not happened.