Double Page layout

Similar Questions

• Creation of double page layout for use in schema

  Hello

  Could someone briefly get thorugh the steps to create a double page layout after EM simulation for use in a scheme to fill the localized elements and active device for a simulation of power amplifier in terms of layout? (I know it's possible in an another, popular EDA tool where the look of the layout as will have ports to the places where the discrete elements are to be connected)

  Thank you much in advance.

  Hey Jake,

  Use the wizard symbol generator: in the project tree, open the node of assistants and double click on symbol generator.  You can find information about how to use the wizard for help (search for "symbol generator" without the quotes in the index), or online at https://awrcorp.com/download/faq/english/docs/Users_Guide/i488885.html#symbol_generator.

• Page in double page layout long process

  Hello everyone,

  I have the following in apex oracle 4.2 problem.

  On some pages on click of button I have the sending page using dynamic action. Submit this request I have some instruction insert for number of records on the page. For this Summit insert need about 17 min. When the process is complete, I see number of duplicates of records in my table of data. I concluded that apex submit double in this case. After that, I put 'Submissions in double page to allow' to 'Non-prevent page be re-posted' and now when I submit this page again once I get the following error "APEX. PAGE. DUPLICATE_SUBMIT ERR-3331 this page had already been supplied and cannot be re-submitted. »

  Anyone know where I can change the timeout of response or something like that?

  I thank in advance.

  D.

  Hi D,

  Please check setting Glassfish-> Configurations-> by default/Server - config-> network-> network of listeners 1 Config / 2-> Http.  Session Timeout value by default is 900 s. change in 1800 and again test the issue. Please keep in mind that this settings page requires to change the maximum message size setting as well. Adjust this setting for your business needs.

  Kind regards

  Savo

• Double layout: on double page layout go to this URL

  Oracle 11g, Apex 3.1, embedded Gateway
  
  With the help of Scotts's suggestion I used the page attribute: presentation of duplicate and set it to no.
  
  I wanted to have the user sent to the homepage and so I put it in the field "on double-page memoirs go to this address.
  
  
  http://myserver.com:8080/apex/f? p = 202:1: & SESSION.
  
  It does not work.
  
  What happens:
  Error page displays
  ERR-3331 this page had already been supplied and cannot be re-introduced.
  Back by demand.
  
  and return to the application is set to: javascript:window.history.go (- 1).
  
  I think I have a valid URL. What did I miss?
  
  TIA,
  
  Sam

  As a best practice, you should reference it the ID of the application as & APP_ID. instead of the real ID.

  You will need to apply the 3.1.1 patch to get the fix for this bug (but simply apply the 3.1.2 patch which is cumulative).

  Scott

• Peut liquid/Alternate one-way to double page layouts

  I am creating a portfolio for my ipad and I have not "been able to find a way to do it.

  What I want to do is:

  If I have a portrait page with 2 images of landscape on this subject.  I want to rotate ipad to landscape and have these two images become two separate pages.

  The only way I can think to do is to double the pages or mess up the order of count of pages so that when the next page was turned, it would not correspond with the right image.

  Thank you!

  I suspect that this is a matter of DPS, and it is requested before. No, there is no way to do what you want and to be honest I have no idea why you want to do it this way.

  Dual orientation is, IMO, a waste of time and effort, and to do what you describe adds nothing to the reader experience at all.

  Save yourself the aggrivation and choose a direction and pour your effort in which using MSOs to allow the reader to commit to enlarge the images.

  You can follow in the DPS forum.

  Bob

• Feature Request: Double page layouts for phone / Tablet collections

  This is a feature suggestion, especially where you have sensitive items in the collections that extend across the phone and Tablet top level NAV.

  IE: same collection includes two provisions applied - one for Tablet, one for the phone.

  Dream scenario would be a presentation for iOS phones, tablets, Android phones, tablets.

  Not too much to ask, is it?

  D

  I had posted this same request a few days ago. Neil has indicated that this is a feature they want to deploy Q1 2016!

• InD double page presentation Presentation creative cloud?

  Hello

  
  

  stored my InD document to get a brochure in the CC. Here, I can only navigate through simple pages, but I want to see the complete double page layout. Is it possible to change this? Can not find...

  Thank you! Boris

  I don't think so. I think you need to open the InDesign file to preview spreads. Or make a PDF of it with gaps selected and view the PDF file.

• Change the Error Message of the presentation in double Page

  Hello
  
  How can I change the error of double page layout in apex?
  I'm currently going to another page, but I want to change the error message.
  
  The vehicle has currently has to continue related
  Error ERR-3331 page had already been provided and cannot be resubmitted.
  link OK.
  
  I would like to say
  
  The page had already been supplied and cannot be resubmitted
  Conitue bound, who will return to the page.
  
  I want the link OK and the error code.
  
  I'm still new to APEX, so I don't know where to go to fix this.
  Can anyone help in this area? Is this even possible, is there another solution to this?
  
  I use the template buttons and most of my pages are model based also.
  
  Thank you
  Mary
  
  Published by: Lucky on January 14, 2010 07:38
  
  Published by: Lucky on January 15, 2010 08:44
  
  Published by: Lucky on January 19, 2010 07:36

  Mary:

  Model based buttons are indeed harder to gray-out/disable HTML buttons are. Demanding that the other buttons on the page are also subject to the same action more complicated the problem.
  It may be possible to have your custom error message to return only for error "dup submission."

  Change the model of error as follows

  Set the "Error Page template" in the "error page control model ' as '.
  #MESSAGE #.
  In the footer of the model section add {code}
  
  {code}

  CITY

  Published by: city has on January 19, 2010 10:52

• Mainting double page in the PDF layout

  Hello.

  I created a document using pages face to face in indesign. Once printed to PDF, it opens properly in safari, that is to say a single page (cover), followed by the double pages all the way, just like his laid out in indesign. It is important, or the document seems strange that aren't facing pages.

  However, in adobe reader by default for single pages. Or the double pages, but the first page became a facing page with the next page which is false.

  Can I do so that when the player double click the PDF file, it will open to two pages in the face of the first page as a single?

  Set the initial view in Acrobat, then save the file. It's the way your customer we'll see when it opens.

• Page layout is the gel

  Hello! I have a problem with my layout of dasylab. I'm collecting data of 8 channels with my USB 6009, sampling frequency is 50 Hz. I am see this data in a page layout and the problem is that the plot is freezing. The plot is given every 20 seconds about actualising. any ideas what's happening? (On the whole interval is 1 minute)

  It was no problem until I implemented some new features like a light signal of my digital input.

  Thank you and have a nice day.

  OK sry for the double post, but after think during the drafting of the last message I found the solution. In the configurator to MAX that I have found a 'Value to read' setting and cela me 1000 k with sampling frequency of 50 Hz I got data every 20 seconds.

  Good bye

• What is the best way to do a double page spread for a magazine?

  I'm trying to put together a magazine and would like to double-page spreads in it, but my printer has asked that the magazine sent him into single pages.  If I have set up as 'pages face to face' and then change of unique pages when I'm done, if this will upset my page layouts double?

  Set up as faced with pages, then when you make the pdf DO NOT CLICK SPREADS.

  When you click Spreads you ask InDesign to produce a PDF file or page 2 or 3 are joined, and 3-4 are attached etc.

  When you have chosen Spreads Indesign product then one Page pdf.

  A single page, this is what is required by a printer with the pages running in the reading order of page 1 - finishing (for example).

  Do not attempt to impose the document yourself.

  Be sure to include your crop marks and your purge.

  Sidenote on the crop and bleed marks:
  

  Crop marks are needed to adjust the page size when printing. Printers do not print to the edge of a tarpaulin, as it's almost impossible to cut a sheet of paper to the side of a color - color shall extend beyond the line of culture, it's called bleed.

  When you're bleeding of the document, for example, to extend any item that is returned right to the foredge (edges in front of the spinal column), then you need to extend this object off the page in a box of "bleed."

  This allows for human error when it is cutting paper, as each leaf is not truncated individually (which take forever!) they are stacked on the other and cut each into piles. It would be impossible to stack all the sheets exactly the same and there is a movement on the press, offsetting so the movement and the fact that they can never be stacked exactly-why you need objects to extend beyond the edge of the page.

  Crop marks tell the guillotine operator where to cut the sheet. Once they have the measures in their guillotine machine it is a simple matter of rinse and repeat with as many piles of paper there.

  And printers can sometimes bend and cut a brake job, and since it is a machine and you keep mechanical errors and human error, you must bleed too.

  Bleeding is important - if you do not add bleed, then, the object stops on the foredge of paper. And if the blade MIC/crops near the object, but the young woman with a Ribbon - then you have a small piece of white on the piece of paper, which is highly undesirable.

  If you need crop markers so printers know where exactly to cut paper and cut in the purge so that you don't have any white chips.

  And Yes you must crop marks even if you do not bleed, if you have no purging it is likely that the edges of the paper are all white, there is no marks where to cut to the right size you want. Therefore, crop marks appear anything.

  And the placement of the crop marks is important. As I said earlier, the crop are to let the guillotine operator know where to cut the page so that it sinks in the background box lost. The background area lost to allow a mechanical, physical, and human error. And saw that the purge can sometimes be included in a final printed piece, it is not desirable to have anything other that bleed objects in the background box lost.

  For this reason stagger you your crop outside the substantive area landmarks lost. As I am in Europe I work mainly in millimeters, so I had put my region to purge must be 3-5 mm (check with your printers for what purge you should allow) and I had put my crop marks offset of 1 mm more than the purge (i.e., 4-6mm).

  This ensures that the crop marks do not infringe the substantive area lost. If your crop marks do not infringe the lost bottom box, you run the risk of the landmarks of crop on a piece of paper final.

  So in summary

  Make sure you have bleed if necessary on your document.

  Add the desired amount of purge - in my case 3 to 5 mm.

  Offset guides to crop so they do not infringe the substantive area lost - in my case 4 to 6mm.

  (purge depends on requirements of printers - make sure that stagger you your crop marks to be outside the substantive area lost).

  Post edited by: Eugene Tyson

  Correction to mm in summary

• Customize the page layout

  Hello!

  By default, in Thunderbird, there are three provisions: Classic, wide and vertical.

  The questions is: none of them is comfortable for me.
  The main part for me is the preview of the email, cause usually I just read letters, email list, cause I need to see when, who and the subject is the least important. I have 4 accounts, many letters, pretty small screen (notebook with 15.6') and the poor eyesight (which means - I put in enough big characters).

  No provision does not allow comfortably read me the letters.

  Is there a possibility to make custom page layout? Using some plugin maybe? I tried to search, but did not find these plugins.

  Any ideas?

  Thanks in advance.

  I think you want 'vision stacked' offered by this add-on:

  http://morelayoutsforthunderbird.mozdev.org/

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• Hi, on my iPhone > grouping > page layout... I do not have access to my: weather, camera, phone, google maps, stopwatch, photos, world clock, alarm, training, messages, monitor activity, mail, wallet, music, shazaam, go pro... I had them before, but

  Hi, on my iPhone > grouping > page layout... I do not have access to my: weather, camera, phone, google maps, stopwatch, photos, world clock, alarm, training, messages, monitor activity, mail, wallet, music, shazaam, go pro... I had them before, but now no more.  Why

  Hello

  If your applications do not appear in the implementation in the app shows, it can help to restart your iPhone and your watch. Close the two devices together, and then restart your iPhone first:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• Broken YouTube page layout?

  Why my Youtube look like that? The normal page layout has disappeared and has been replaced by this linear and dull words collection! Now, that's all I get when I go to YouTube. I can watch videos, but the site seems broken. I run the most current Safari and Flash. How can I fix it?

  Try to clear your caches and see if it works.

  Preferences of Safari--> Advanced--> Show develop menu in menu bar--> develop--> empty Caches

• HP6830: HP6830 no 'page layout' in no excel

  I have an excel spreadsheet when I show preview print landscape mode there are a couple of colunms overflowing on a 2nd page.  On other HP printers, there is a page layout that I select Mount 1 page wide high 1 page.  and it fits on a single page.

  The HP6830 S/W does not have the "page Setup" option, then now it prints on 2 pages.  This printer is connected to a Windows 8.1 System.

  Hi there @RayNK

  Welcome to the forums of HP,

  I read your post on printing problems you run into with MS Excel. I suggest to check the links, I gathered for you below on how to change the settings for Excel. I think and I hope that they will help you.

  Where is the Page layout in Microsoft Excel 2007, 2010 and 2013