Double-sided printing OK except page 1

Similar Questions

• HP OfficeJet 6700 prints page 2 upside down when you select double-sided printing

  Product name: HP OfficeJet 6700 Premium

  OPERATING SYSTEM: OS X 10.8

  * Latest firmware installed

  * Installed drivers from HP

  Printing works fine, except that when you select print double-sided on the back page is backwards.

  I tried using the 'Long' edge and "short edge binding", but it's not changing anything. Yes, I save the settings.

  It works OK under Windows 7.

  Hi Geert,

  Sorry, it supposed to be 'Sign', have no idea how it came as such a typo in

  Update of the OS before the Officejet is not enough, these updates are owned by the operating system.

  The HP update printer driver is also provided via Apple Software Update, an update, you did before having unit did not have the HP update as there was no HP devices connected to your Mac, so please be sure to follow these steps both to update the drivers of HP.

• Double-sided print second page upside down HP6700

  When I print 2 Facer, the second page is upside down. I looked for solutions on this forum and on the net, but nothing helped. I have installed new drivers, checked all the available boxes. The one I need ('turn page' or something like that) is not found.

  I have a new HP6700, to replace an old HP6700 which made duplex very well, but became old. Why is it suddenly so hard to make something of my old printer without problems?

  I use a MacBook Pro with OS X 10.9 laptop.

  I hope someone can help me.

  Hello Cheetah12,

  Thanks for your reply. In the meantime I discovered that the most important step is NOT to install the printer via AirPrint, but using HP6700. Only, then you have the possibility to click on the duplex option and install the printer with the 4.1.2 pilot.

  The solution mentioned by Roger2499 in the following thread has helped me tremendously, after a day of frustration!

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/double-sided-printing-with-6700-e/TD-p/3476773

  Thanks for trying to help!

• LaserJet pro M277dw MFP: double-sided printing

  Really frustrating! New printer, put in place and works well with El Capitan except I can't seem to find a way to configure for automatic duplex copy. Read all the forums, but the options do not exist with El Capitan! Can someone help me please?

  Hello

  You related to automatic duplex printing or copy? While your title refers to printing your description refer to the copy...

  Regarding printing, follow the steps below to automatically print double-sided print jobs:

  In the file being used to print click the file menu and select print.
  NOTE: The print window might be minimized. Press show details to show all available print option.

  In the print window expanded you will find next to Copies the checkbox for duplex. Select the check box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  To select the connection type click the selection box below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  5. Select the menu drop down.

  6. set the duplex option as the binding edge (Portrait) Long or short edge (landscape) bond.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  About two-sided copying, the M277dw offer that duplex printing features, not copy both sides of a document original two-sides.

  Kind regards
  Shlomi

• HP officejet pro 8610: double sided printing - brochure

  I'm trying to print a booklet from a pdf file.  When I print double sided printing pages in reverse.  Front of the faces of the page to the top and back of the page down.

  How can I get to printing, so that I can form a booklet?

  Hi @roza,

  I'd love to help you with your duplex settings. Looks like you will need to change the short edge binding on the long edge. I found something that might help with these settings: with long edges and parameters of short edge duplex printing.

  I hope this helps.

• HP Officejet Pro 8610: Automatic double-sided printing

  Lost my automatic double-sided printing - now it's printing of the front of the page and then he wants to get back into the tray to print on the back, which I never did before.  Please help me to get it back.

  The function "automatic detection" used by some drivers during installation does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that he is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• OfficeJetPro8710: Disabling automatic double-sided printing

  I just installed this new printer (8710) and use the operating system macOS 10.12 Sierra. I can't understand how the new printer to a default back. It is defaulted to double sided printing and I want to change that. Any suggestions?

  Hello
  Follow these steps to disable two-sided printing:
  
  Open the file that you want to print. On the file menu, select print. The print window is displayed.
  
  NOTE: The print window might be minimized. Click Show details to display all available parameters.
  
  Click on the settings drop-down list, it usually appears under the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.
  
  Select layout from the drop-down.
  
  Set the duplex as Off.
  
  You can save the settings as a preset by clicking preset > save current settings as preset.
  
  By default, the print job by completing these settings will remain until another preset is used in the future.
  
  Kind regards
  Shlomi

• LaserJet P1102w: Double-sided printing will not turn off

  Even if double-sided printing is NOT selected in the printer properties, printing all ask for double-sided printing.  So if I go to print a single page printjob, the computer asks to have the blank page that was 'printed' just to get back in the tray.

  How can I get this fixed?

  Hi @Skunkeeper,

  Welcome to the HP Support forum.

  I understand that you use a HP LaserJet Pro P1102w printer with a Windows 10 computer and when you try to print a single page, the printer ejects a blank page and ten invites you to put in the tray, so the second side can be printed, even if double-sided printing is not selected. I would like to help with that.

  This really looks like a software problem. I would like to start by running this HP print and Scan Doctor. It is a tool that allows you to diagnose and solve the problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Envy 4500: Double-sided printing

  I've had my printer for about two months now, and at the beginning I had no problem with printing. I was thrilled that the printer has the ability to duplex printing to save paper, but all of a sudden my printer is more two-sided printing even if the "meetings" are checked in the print menu that appears before printing. I would go to the bottom of this, because I prefer to take advantage of the features of the printer and save paper. Please let me know what I am doing wrong and advice to solve this problem, thank you!

  Collected has nothing to do with the double-sided, this means that when you print 3 copies of a document that is five pages long, it will print pages 1 to 5 three times instead of print page 1 three times and then page 2 three times and so on. Double-sided printing can be enacted in one of two ways. Either you select double-sided as an option when you go to print a print job, or you set the driver to duplex by default values. According to the printer model, you can also apply duplexing by telling the duplex printer all. It is model specific and you do not specify the pattern here, so I can't give you the exact details.

• double-sided printing on my mac - no luck!

  I have an officejet 4500 G510g and Mac OS 10.7.4.

  I can't get my printer to do 2-sided. Help, please! It's so frustrating.

  Thank you!

  Hello
  The two-Sided feature reffer automatic two sided printing.
  As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:

  To perform manual duplexing, Joanie you use the Pages to the printer setting, you can find below:
  http://support.HP.com/us-en/document/c01663233

  Thus, another alternative is to use the HP two-sided printing software:
  http://FTP.HP.com/pub/softlib/software12/COL35975/MP-88750-2/HP_Two-sided_Printing.dmg
  You can access this tool by clicking the PDF button at the bottom of the print dialog box, and then select double-sided printing and follow the on-screen instructions.

  Kind regards
  Shlomi

• HP 2549: HP 2549 and Mac OS x: double-sided printing does not work

  Hello!

  I just installed this printer on my Macbook Air and I cannot print double-sided. I tried by USB / wireless (in the case where there is a difference between the two) but no luck.

  I followed the advice in this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/two-sided-printing-no-longer-availble-...

  but I did not tab "driver". I only have "Général", "Levels of power" and "utility." I tried to delete the printer and then add it with HP 2359 and AirPrint not but that does not change.

  When I print a pdf document, double-sided printed is greyed out and I cannot change.

  What should I do? I already reinstalled the drivers on the HP Web site, I selected all the things that I can install it, but that has not changed anything.

  Thank you.

  Hi @blablaalf,

  Welcome to the HP Forums!

  I see that two-sided printing does not work with your printer HP 2549 on Mac OS X 10.10. I'm happy to help with this problem!

  I assume that your printer is a HP Deskjet 2549, otherwise please reply with the exact type of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  Otherwise, if the type of printer you have. According to this guide, print on both sides of the paper (duplex printing). He said: this printer is not an automatic duplex unit integrated, you can always print on both sides of the page to manually reload paper in the paper after printing tray first to print on both sides of the paper.

  This is the reason why this option is grayed out.

  If you print on letterhead, pre-printed paper or paper with watermarks and pre-drilled holes, the printer prints first the front of the document. Load the paper with the top edge first and the side to be printed facing downwards.

• OfficeJet Pro 8000 double-sided printing will not respond to the control software #2

  Win XP Pro SP3

  OfficeJet Pro 8000 Wireless

  Does anyone know why Officejet Pro 8000 had control of double-sided printing, removed from the spec software?

  Does anyone know if there is a printer of this type which will respond to such control?

  UPDATE!

  ----------

  This printer is now works very well with total control on duplex printing. But how did this happen...?

  Two things have changed - well, maybe three.

  But first of all to mention another very annoying problem: wireless printer to my network connection always collapsed which was a double nuisance (23/06/2016 see also installing the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0)

  The road to happiness... I've finally updated my PC to a laptop HP Win7 (there is a problem with the laptop, but that's another story...)

  During the process of setting up laptop, I had to set up the network and add the printer. In between aid was a FAQ something like "the wirless connection drops regularly." What interested me.

  The fix was so simple - mychosen IP address has always been in the DNS range which was probably not very smart, but I didn't know any different. No one had ever mentioned before.

  The idea is to select an address in the static range IE outside the DNS. So I took a number x.x.x.249 and bingo!, a solid and reliable connection that is always there.

  Given the new laptop for download the drivers again. What went well and of course, the new machine is much faster.

  Anyway after a few tries, much to my delight I discovered that two-sided printing worked with auto rotation if I check the box. Printing a document like that I would see in portrate (horizontal spine) and read down the two pages, turn to the next page and the same thing at the end of the document. Or, if you use the rotation of non - normal mode - the printing orientation is 'normal '.

  It's a shame that it was necessary to buy a new laptop with a new o/s just to discover the problem by chance...

• HP Photosmart 5524 - double sided printing - back comes out backwards

  I bought this printer last week and she chose specifically because it's "automatic double-sided printing. However, when it is set to print (flip on short edge) the back is reflected backwards.

  Does anyone know how to get all pages of reading in the same way?

  Two sided with the parameter ' Flip on short edge ' prints the pages in this way. When you bind the sheets of paper on the shorter side (top of page) the reverse page should be printed in reverse to ensure readability.

  If you want both sides to be printed the same way, try the two sided with the option ' Flip on the side the longest. "

• more than 8600 double sided printing

  How can I turn off the double-sided printing 8600 more.  There is NO setting for printing.  I've reloaded the software on my Mac and still no settings anywhere.

  Hello
  Please follow the steps below to disable grubbing double-sided:

  The application used to print, click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized. Click the blue triangle next to the name of the printer or on the button view details to see all the available parameters.

  In the print window expanded you will find next to Copies the checkbox for duplex. Uncheck the box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  Click on the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  Select layout from the drop-down.

  Set the duplex as Off.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  Kind regards
  Shlomi

• Horizontal stripes on the DOUBLE-SIDED PRINTING?

  Have you ever notice horizontal lines on the side front or back a page double-sided printing?

  This particular series is caused by ink printed on the first page is does not completely dry before going to the back. When the first page of traverse, the ink doesn't have enough time to dry the back of the page before printing.

  When the back page comes from print, the rolls of smear the wet ink and made streaks.

  The only way of all about this particular situation is to print manually both sides. Although it will be a lot of your time, it's a work around.

  Hope it will be useful to many of you.