LaserJet pro M277dw MFP: double-sided printing

Similar Questions

• M277dw MFP: Double-sided COPY (do not print) with the ADF and MFP M277dw color printer

  This unit can perform a copy front and back on a pile of documents front / back, loaded in the ADF? (I know that it is able to copy both sides of a single page).

  In the list of options in control panel touch control for "duplex", it has classified 2 options from which to choose:

  1 - face to face 1

  1 - face to face 2

  It seems that I need a "2-sided to 2 faces" option, correct?

  It seems that the device must be capable of 2 faces double-sided COPY and more double-sided printing.

  I tried several combinations of different settings but cannot figure it out (if it is even possible) to take a stack of documents face 2. Put them together in the ADF and the output device an identical pile of copies 2 faces.

  Thanks in advance for any help/suggestions.

  Hey @AA10,

  Welcome to the Forums of HP Support!

  I see you try to double-sided copy on your HP Color LaserJet Pro MFP M277dw. There the duplexer to print system which allows you to print 2 sides, but does not have a duplexer built-in automatic document feeder. That's why you miss the 2 head to head 2 under the menu copy option. The two-sided to 2 in the menu copy allows you to copy documents two unique faces the printer would then print 2 sides. You must copy a page at a time and return them to make Copies in duplex.

  Please let me know if you have found this information useful.

• LaserJet Pro M127fn MFP: Stuck on "Print Fax Front Page.

  This MFP is stuck with the message, 'Printing Fax Page One' I've tried the reset instructions are on the forums, but cannot get rid of this message. Is there a reset 'hard' or 'factory' I can do? Thank you

  Hi again,

  I would say for updating the firmware of the printer.

  Here is the link just choose your operating system and select the firmware download.

  HP LaserJet Pro M127 MFP series Firmware update

  Make sure that you scroll to the Firmware section.

  See if that helps

• HP Officejet Pro 8610: Automatic double-sided printing

  Lost my automatic double-sided printing - now it's printing of the front of the page and then he wants to get back into the tray to print on the back, which I never did before.  Please help me to get it back.

  The function "automatic detection" used by some drivers during installation does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that he is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• OfficeJet Pro 8600 Plus: double-sided printing HP8600 has stopped working

  My HP8600 911 g printer double-sided printing has stopped working. Duplex accessory is still in place. Forum told to go into system preferences, open print queue and click on the driver tab. There is no driver tab. Just, it displays 'Driver 2.0' and does not give me the option to change this.  Don't know why? Duplex to work properly and now it doesn't. Any help would be greatly appreciated. Thank you!

  Hello

  I guess you can use AirPrint driver seeing your description.

  If please, try to add the printers printer & scanner, this time, click the use drop down and select the model of the printer default AirPrint option instead.

  Now check these settings and try to print a double-sided work again.

  Shlomi

• HP Color LaserJet MFP M277 Pro: No software or drivers are available for HP Color LaserJet Pro M277dw MFP

  Trying to download the latest drivers (I couldn't scan with Easy Scan more after the release of macOS sierra 10.12) I received the following massage

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-m277-series/7089945/model/...

  No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.

  PS: My OS has been identified correctly in the web page.

  Hi @pisca46,

  Thank you for joining the HP Forums!

  I understand that there is no drivers for your HP Color LaserJet Pro MFP M277dw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

  You are right that there are currently no drivers available at this time. In the meantime, I suggest trying the rest of this guide, of install a printer Mac driver by using Apple Software Updateand then try using the Apple Image Capture.

  Otherwise, all we can do is wait for the drivers and software provision, or plan to use an older version of Mac OS X.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• OfficeJet Pro 8600 Plus: double sided printing

  Since the 'Windows 10' upgrade, I can access only the "manually" printing double sided documents have, while in "Windows 8.1" document double face printing functionality worked well.» I think I have the latest drivers.

  After upgrading to W10, I tried to print a doco double sided and couldn't, then entered the HP support and looked the new driver relevent and had also a check to see if I had the driver the most recent it says that I do, but the problem persists.

  Concerning

  PS: I've since deleted any reference to my printer my printer & menu devices and then added which solved the problem.

  Refer to the Multiple of printer names display in the HP printer assistant.

• HPlaserjet3390: My Laserjet 3390 offers more double-sided printing after upgrading windows 10

  My all-in-one worked perfectly but after windows upgrade 10 I can't solitaire to print double-sided and does not

  as one more option.

  How can I get print double sided once again.

  Make sure the driver knows that a duplex unit is present on the printer (assuming that one is):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

  If the device does not have a double-sided hardware unit, then you can not do Automatic duplexing, but you should be able to do duplex printing Manual (print odd sides, reinsert the paper print same sides) if the demand for source document and printer driver supports this.

• LaserJet Pro M426fdw MFP: Automatic duplex printing works in 2016 in Word but not in 1 c Enterprise 8

  Automatic duplex printing works in Word 2016 but no 1 c company. When I choose "Print on both sides" in Word 2016 it works as it should. But in the 1 c company it prints 2 pages instead of 1. Can someone explain why?

  The problem is with 1 c Enterprise 8. In version 8.3, it is possible to select two-sided printing in file-> Page Setup. This program doesn't respect changes to the settings of the printer in the print dialog box. You must change the configuration of the default printer in the control panel.

• HP Color LaserJet MFP M277 Pro: Problem in black with print on the right side of the paper on a HP Color LaserJet Pro M277dw MFP

  When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed.  I tried to shake the black toner, but nothing has changed...  Should I replace the black toner?

  Hey @candreas,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing faded on the side of your impressions of your printer Laserjet M277dw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after following the above, are you always see fainted to prints, either the cartridge or the printer needs to be replaced. You can contact the HP Support by clicking here and filling out the form below.

  Please let me know the results after following the above. If you are able to improve the print quality or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Color MFP M277dw LaserjetPro: Problem in black with print on the right side of the paper on a HP Color LaserJet Pro M277dw MFP

  When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed.  I tried to shake the black toner, but nothing has changed...

  There is obviously enough ink that the rest of the page prints fine.

  Please advise on how to deal with this.

  Thank you.

  Can you post a sample. It could still be the toner cartridge there is a load inside roll and if a part of the roller is defective so that area will print light or does not print at all. It could also be the laser/scanner lens dusted the course in this area. Most of the time, it is the toner cartridge.

• HP LASERJET PRO m277DW mfp: Printers Multifunction LASERJET PRO m277dw WARNIN CARTRIDGE NOT RECOGNIZED PROBLEM

  After you download an update from HP, I can't print because there are the following warning: "memory of the cartridges defective material consumption in ciano black - yellow - red.
  How can I solve the problem?
  Thank you

  Hey @manekineko,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a cartridge on printer Laserjet M277dw error. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the problems of the cartridge with your printer.

  Please let me know the results after following the above. If after following the above, you are able to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Color LaserJet MFP M277 Pro: History FAX for HP Color LaserJet Pro M277dw MFP

  Hello, is there a history of fax for the m277dw? We use the fax of harware so far, not the web interface.

  Thank you

  Hello @Vassili,

  It is a great place to get help! I read your post and see that you want to know if there is a history of available fax. I want to help you solve this problem.

  You can print a report from the Fax activity log. In my view, there is a limit that it can print from history.

  • Touch the Fax icon on the printer.
  • Menu fax.
  • Fax reports.
  • Fax activity log.
  • Print the report.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• OfficeJet Pro 8600: No double-sided printing/Officejet Pro 8600 + 10 Windows

  I've just updated my software driver for the Officejet Pro 8600 and do not see an option to print on both sides of the page. Using Windows 10.

  Any suggestions on a pilot or a process that can get me back in the duplex printing function? It is not an option in the print menu more.

  Thank you for pointing me in the right direction, that worked!

• Color LaserJet Pro M277dw MFP: MFP M277dw paper tray

  The paper tray does not completely fit in the printer.  It's coming out about 2 ".  I don't see anything block.  Printer jobs – pick up paper from the bin, etc, but it will not duplex printing, and if I photocopy something, there is a white margin on the copy.

  Help!

  May (inadvertently) pressing the blue "the tray Extender" latch, which aims to extend the status bar in the order so that it can adapt to (longer) the legal paper size.