Doubt pivot

Similar Questions

• View doubts pivot

  Hello
  I use 11g. I created the pivot report (table and graph). Now, I want to display this graph pivot only in my compound layout. How to set in 11g.
  
  Thank you
  Gram

  PivotTable Edit-> Position drop-down list: select chart only...

  PLS, mark it contributes to...

• Gasoline and pivot table uses in OBIEE

  Hello people,
  
  Please help understand what PIVOTTABLE DYNAMIC and CALIBER in OBIEE answers
  in what cases or scenario will be used for these things.
  
  and what is the CASE in OBIEE, where it is used and what is its purpose.
  
  Thanks in advance
  
  JMs

  The pivot table view is an interactive view which allows you to rotate the lines, columns and headers to get different perspectives of the data section. PivotTables is navigable and percables and is particularly useful for trend reports.

  Gauges are useful to show the performance against objectives. Gauge types supported include dial and bar style light bulb gauges.

  CASE statement is used for conditions, its use is the case when x = y end doubts... Its similar IF statement in programming.

  -Madan

• Peux I installed iOS 10 from my iPad to my iPhone6 or my PowerbookPro? Or 10 doesn't automatically do that? Doubt it!

  Peux I installed iOS 10 from my iPad to my iPhone6 or my PowerbookPro?

  Or 10 doesn't automatically do that?

  Doubt it!

  If you're wondering how to install iOS 10, go to settings on your iPhone. Then click on general, then software update. Wait to check out the update, and then click Download and install at the bottom of the iOS 10 pop up.

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• I have a doubt... the two Firefox syn account and firefox support account are the same or not

  I have a doubt... Firefox and firefox syn account for both are the same or not change support

  Hello shivarajnaidu, not for the moment these two accounts are completely separate, although it is planned to link the two of them on behalf of persona in the foreseeable future: https://login.persona.org/about

• I got a message saying my iCloud id has expired. The text has a link and asks me to enter bank details. Is this doubtful

  Ive got a text saying my iCloud ID has expired and its got a link and asks me to enter bank details. Is it doubtful?

  Do not reply or reply!  Sounds like a phishing attempt.

  http://www.Apple.com/legal/more-resources/phishing/

  Identify the fraudulent 'phishing' - Apple Support e-mail

• I'm ready to buy a Apple Watch in this week... so my doubt

  I'm ready to buy a Apple Watch in this week... so my doubt and fear is if Apple Watch 2 starting soon can exchange with my product? Anyone hv any idea or much knowledge about the launch d & all please help me with your valuable answers.... plz

  < published by host >

  Apple has made no announcement about Apple Watch 2. Speculation is forbidden on the forum, so without an official announcement, nobody here could say. Given that nothing has been said, I doubt that you would benefit from an exchange of your product. They do not trade for new devices in any case for the watch. iPhones and iPads can be returned for recycling and a store credit, but that's it.

• Doubts on my new book

  Hi all:

  I bought a new book a few days ago. I am really satisfied with this wonderful machine. After using it for a few days, I have two doubts:

  (1) the fan in my booklet is most of the time. Is this normal?
  (2) what are the specifications of memory? I want to upgrade the RAM in my machine, but I have no reference manuals for do I have to use the memory modules.

  Thank you very much

  In case it helps to... My experience with my U100 is the fan is certainly * not * "almost all the time." For example, I went about 40 minutes before to check emails, news, etc., using the power of the battery and the default 'normal' power setting, and the fan is not switched on once. (Room temperature is 23 degrees c).

  If I use it outside in the Sun very as the case becomes hot to the touch, the fan tends to come regularly.

  If it runs on my desk from the power outlet (using the parameter 'high power' by default) and I do the work of the processor hard as when you make a disk backup or editing photos, then yes the fan are quite light. But it's just like most laptops.

  If she does everything what * and * the sun shines directly on it as well, then the fan comes on saying maybe 50% or more of the time. (A silver case would have reduced the effect of solar heating - but look very smart matte black ;-).)

  How does this compare with your experience?

  To the subject of RAM, yours came with 512 MB like mine? (I guess this would be the module PA3312U - 2M 51, as described on this site - 512 MB memory PC2700 DDR SODIMM (333 MHz)).

  Before I bought the machine the provider told me that he has that one slot RAM and that in order to upgrade the memory, I would need to take the existing 512 MB and replace it with a 1 GB module. But I have not confirmed which and there is no mention of a module of 1 GB on this site. The 512 MB so far seems sufficient, but I would be interested to know if you are able to increase the RAM on your U100.

  Kind regards
  David Tong.

  PS. It occurs to me that if you feel the need to increase the RAM, then maybe you do work pretty hard machine, in this case you expect the fan to be busy.

• The pivot in Tecra S1 and duplicator?

  I would like to use the pivot of my TFT under my Tecra S1 which is anchored.

  No chance for this?

  See you soon

  Lutz

  Hello

  As far as I know you need a 3rd party software that should be supplied with the monitor.
  But it works on the unit not rooted?

  Also check this post on a similar question:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=5&ThreadId=9726

• How can I rotate an image of a pivot point?

  Hello

  I have a problem, the rotation VI Imaq only rotate an image at its Center. My problem is that I need a pivot known to this point. How can I achieve this?

  Thank you

  Francesco.

  This message can help?
  http://forums.NI.com/T5/LabVIEW/rotate-an-image-by-specified-pixel/TD-p/2570453

• Display pivoting on the 8600

  OK, I have a 8600 All in 1 more. When I tried to open a document on the scanner, I caught the display, which pivoted upward and now faces almost to the top. I can't seem to find an exit or a button, so I can rotate downwards. Any ideas?

  Hi there ebeisher,

  Feeling just right of the screen to the Panel, you should feel raised 3 points. Push here and pull. This should return the screen in position for you. Let us know if it helps.

  Good luck!

• Table - doubt

  Hello. I have a job to do which is: we have to create a table of random numbers () and the user gives a number he chooses. We need to create a new table with all table at random numbers that are larger than the number of the user.

  I did this: http://img291.imageshack.us/my.php?image=helpaipeop3.jpg

  My question is: How can I create a new table with all the numbers that are larger than the number?

  In the future, please attach images directly to your message instead of placing them on ImageShack so people can access it directly.

  To answer your question: you're not understanding dataflow. Since there is that no dependencies in the data between the 2 loops then the 2 loops will be different at the same time. However, the background loop runs with empty bays are filled until the top loop ends. Your incorrect use of local variables is a mistake and the number without a doubt one of the reasons why we see programmes does not properly. Please make sure that sets are filled before you try to use them. That said, is there no need 2 loops first. The comparison just there where you generate the random number. Use a shift register to accumulate a table. If the random number is larger than the control, and then add it to the table. If this isn't the case, pass through. Use a box structure. Like this:

  To learn more about LabVIEW, it is recommended that you go through the tutorials and look over the material in tutorials the NI Developer Zone Learning Center , which provides links to other materials and other. You can also take a course online for free.

• When I open my browser Google Chrome I get error "could not find the translation file:...\pivot.ini [WPCTRL95] does not work.

  Hello

  I have the same problem. The error message appears when I open my browser Google Chrome (Yes, only that browser). The full message is: could not find the file:...\pivot.ini translation [WPCTRL95] will not run.
  What kind of changes? As far as I know, I did not bring changes of lipids to my computer or programs. The thing is that I for a moment, and I don't recall the exact moment when it appeared.

  Hello

  Please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Doubts on Xperia Z3 double Downgrade, enter recovery

  Hi, I upgraded my dual Z3 using PC companian and I do worse than worse battery life that lasts hardly 8 hours with an average of 2 hours on the screen using only a SIM... Don't recommend me to cut my mobile data live wallpaper etc... I don't need two days back up like advertising, I just need at least a day...

  And my question is can it downgrade to KitKat without rooting my phone? When I used the Sony Emma software to connect my phone with PC, it showed that your phone is locked and you need to unlock your phone to activate the features...

  And other doubt is how to reset recovery mode my phone? I tried with a large number of key combinations and all are allowed in normal startup upward...

  And tell me any othere ways to regain my battery upward without decommissioning if there is place (even though I don't think so)

  I appreciate your valuable suggestions... Thank you

  Yes, you can downgrade without rooting see here for a guide on how to create your own firmware and how manually Flash your phone, but you may need to find the firmware from another country if it is available or search XDA

  Said EMMA instructions Sony what - for use with compatible phone and only for phones that have a Bootloader unlocked

  Finally there is no magic button combo to go into recovery mode as Xperia devices do not have unless you have rooted and installed a custom recovery