Downhill from the Red epic

Similar Questions

• Re: Importing R3D Red EPIC 5 K?

  How to import pictures from the Red EPIC shot in 5 K resolution in a R3D file?

  EPIC RED importer | digital video software - Adobe Labs

• My husband and I have the same phone.  We see the two of you on each of our phones calls him, and that missed us a call from (the phone number is in red when it's a missed call).  Thanks for your help.

  My husband and I have the same phone.  We see them entering and fact phone outgoing calls and missed calls (phone # is in red) from the other phone.  Thank you for your help.

  This happens when you both share the same Apple ID. It is recommended - for a number of reasons - that each have their own Apple ID and then uses the sharing of the family for things you want to share. http://www.Apple.com/icloud/family-sharing/

• Unable to start - the Red voltage switch going from 240 to 110

  original title: the Red voltage switch

  the Red voltage switch went from 240 ø110 and now the computer will not turn on. What this mean and can I fix it?

  If you are in Europe you probably fried something on the motherboard, in any case, there are not much of what we can do to help you here.  You will need to take the machine to a competent person of material and have it or its audit of the machine.  If you're lucky, that the power supply may be the only victim, if you're not as lucky the motherboard can be toast!

  John

• Color problems: the red color has disappeared from my computer

  Original title: color problems

  The red color has disappeared from my computer. The moniter is ok.

  Hello
   
  You did it changes on your machine before the problem?
   
  It could be a hardware failure.
   
  Things that can be loaded are listed below:
  
  broken monitor cable has...
  b. defective monitor.
  c. faulty graphics card.
   
  You can consider measurements:
   
  Step 1:
   
  Double check that monitor cable is firmly attached. Try the Wiggles, see if the color returns.
  Step 2:
  
  Test another monitor on the PC (Personal Computer), and/or the monitor on another PC.
  Step 3:
  
  You may have a bad cable, or the monitor may be defective.
   
  Step 4:
   
  Right-click on the desktop and select Properties. Go to the tab settings, and report on what choice was filed under 'Color quality' and what is the other choice in the drop-down list?
   
  If there is no choice of color quality better than what you have, you may not use the correct driver for your video card or monitor.
   
  Uninstall and reinstall the drivers for video card and see if the red color appears.
   
  Follow the steps in the link to uninstall and reinstall the video card drivers.
  http://www.Microsoft.com/windowsxp/using/Setup/support/driver.mspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• Ok. so, when I sync my music to the ipod, it can read my computer to play, but it is not recognized as the device when I unplug it from the computer.

  my ipod plays only a few original downloads on my sound surround of boise, but the most recent downloads will only record and play on my computer. When I download music it synchronizes and can be found and played back on the computer but is not found on the actual screen of the ipod to play my biose surround sound, but there is space on the ipod.

  If you wait for the new songs (in your iTunes library) to automatically synchronize to the iPod, it must be configured to use automatic synchronization (setting synchronization music ).  Select iPod in iTunes by clicking on its button on the device.  For current iTunes, the screenshot below shows top left corner my iTunes, iPod touch window circled in red.

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, the music from the iPod settings screen.  Check mark for Sync music box (if it isn't already)

  NOTE: No matter what songs on iPod that are not in your iTunes library (on computer) will be lost.

  This enables automatic synchronization.  You can choose to synchronize the entire music library (if it fits on the iPod) or a part of the selection .  Implement this screen as you want, and then click apply.  Further, iTunes automatically keeps iPod "in phase" with the changes to your music library (or the selected part of it) when you connect the iPod (or click sync , if already connected).

  If this isn't your problem, please post back with additional details.

• Why I can't download snapchat from the App Store?

  Because my snapchat does not open, I have demolished it and tried to download it again from the App Store. It shows a circle and a square in the Middle, as it is updated or download it again, but it is not does not appear on my homescreen it downloads again. Sometimes he sshows a cloud with an arrow pointing down and I click it and it says that it would not be a surcharge is my phone before, but it will not download. What can I do about it?

  Hello

  Restart your iPhone.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Then try to download Snapchat.

• I lost the red, amber and Green Shield logo shown against websites that indicates course to use, how can I implement this?

  Displaying web sites do a search, I used to get the small shield logo appears to the right of each web address.

  This shield was either: -.
  -Red - site at risk
  -Amber - WARNING
  -Green safe to open it.

  I don't know that I have created this via Firefox, but is no longer displays. If that was the case where can I find the etting to implement?

  That must have been added by an extension that check web pages.
  
  It could be WOT (Web Of Trust) or add something from security software.

  Have never reset Firefox because this will create a new profile and you lose installed extensions?

  In this case, you would have a 'old Firefox Data' folder on the desktop.

  • https://support.Mozilla.org/KB/reset-Firefox-easily-fix-most-problems

  It is possible to retrieve the data from the old profile, but be careful not to copy the files corrupted to avoid transporting on the problem.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• Why do I get messages saying that I have not destroyed tabs; I ususally click on the red dot. why I get this error message?

  In the past I could navigate from one site to another without closing a tab. The messages now appear that say I have does not close a tab and need to close or to restore. I tried closing of tabs as I've used them but my tab bar shows no tabs open when I close Firefox. When I restart Firefox I get messages saying that I did not close the tabs! It's very annoying. How do I put it back for when I click the red dot, it is closed. and when I restarted Firefox it just goes to my home page? I use a Mac 10.6.8

  No, there is no problem now with this parameter when the bug is fixed.
  the problem is basically firefox 20 wrong classifies this way to close the browser as an accident & will launch the restore function of session at the next launch of the browser. the key to everything: config above completely shuts down service sessionrestore for accidents.

  Once the bug should be fixed in firefox 21, I would recommend resetting browser.sessionstore.resume_from_crash back to its default value "true" If, so that you get the benefit of a restored session, where firefox crashes really some time.

• Is it possible to disable or remove an add-on from the outside of the FF (it does not start after adding an addon)

  I installed the addon and now FF won't start and seems to be a loop. Is it possible to uninstall the addon or configure FF so that it starts with disabled addons? Don't forget that FF does not at all so I don't have access to one of the internal functions.

  Release the FF is 17.0.1, on Windiows XP/SP3

  In addition, as soon as I did this, I would have the addon added to the red list.

  Open Firefox in Safe Mode diagnosis by holding down the SHIFT key when you start Firefox. Firefox will start with Extensions and some other things off. When done with the Safe Mode, the release of Firefox, wait a few seconds and click the Firefox desktop icon to start Firefox in normal mode.

  More info on who and by removing manually extensions, if any, included in the following articles:

  • https://support.Mozilla.org/en-us/KB/cannot uninstall an add-on
  • http://KB.mozillazine.org/Uninstalling_extensions

  Additional follow-up questions:

  • Name of the add-on?
  • Link to which you downloaded the add-on?
  • Was this a separate application? If Yes, have you looked in Control Panel > add or remove programs (or programs and features) to see if it is listed and remove from there?

• I can't get my iPod to charge, it turns on, but the red light flashes once

  My iPod will not charge.  I had it plugged in for more than 3 hours and still not a red flashing light once and then that turns off.

  The battery can be worn out and unable to hold a charge when it is disconnected from the power supply.  How old is your shuffle?

  When you are connected to the power, is light the shuffle ON?  If WE, is it blinks or is it solid (not flashing)?  If solid, what color?

  Is not added as a new device or sync

  If it is a brand new 4th generation iPod shuffle you are using for the first time, make sure that the USB docking cable plug is fully inserted into the headphone jack of the shuffle, as indicated in the present document

  iPod shuffle (4th generation): not seen in iTunes - Apple Support

• Having trouble getting rid of the red triangle...

  Expert guys, please help me...

  I've been looking for the solution, but I could not find.

  I made a simple worksheet with simple calculations, but insists a 'wild' red triangle by not going not far from saying that "numbers can be divided by zero. But my problem is that I do not have the numbers to be placed in the cells again. I am planning a cost for my small store journal. Is there not an OU "IF" formula, a formula of "conditioning" that prevents the red triangle to appear?

  Thanks in advance.

  Assuming that it resembles your situation:

  

  D2 = B2÷C2

  that occurs because and empty cell will return zero

  You can solve this by:

  (1) ignore OR

  (2) use the formula

  = SIERREUR (B2÷C2, "")

  OR

  (3) use the formula

  If (C2 = 0, "", B2÷C2)

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• in labview how can vision 2013 I extract image from plane red color color image in fromRGB?

  ...

  Okay, now I have what I consider to be an "acceptable" solution showing the R, G and B had an Image color.  He doesn't require a "pixel-by-pixel" approach that I posted yesterday, but works directly with color plans you get the RGB image splitting in his 3 grey U8 images.

  I enclose a demo project that I saved in LabVIEW 2012.  It is quite rudimentary - you provide a picture (I used the Microsoft sample pictures folder Desert.jpg) and it shows you the Image and the red, green and blue color had.  A switch allows you to view the plans of color and the scales of gray U8 (very easy), but also allows you to consider the R, G and B channels of color (a little harder to do).  In the latter case, the Image is, indeed, not the original Image, but the Image resulting from recombination R + G + B.

  For this image to 1024 x 768 pixels, decomposition and display three color plans updated to (I estimate here) 100 times per second.  When using the gray scales, it was about 20 times faster (note that color requires make first of all the gray scale, as well as each resulting image R, G and B requires 4 bytes instead of 1 byte per pixel).

  Here is the front - note that the blue channel has almost nothing except 'sky', while the reddish rocks are particularly acute in the red channel.

  

  Bob Schor