Download becomes slow and then stops

Similar Questions

• Why Flash stop download to 30% and then stops.

  I had a flash on my mac and I had to update so I tried. After going through all the steps, I proceeded to download the new update and as it was downloading it just stopped at 30% and I left it there for a while and it remained only on 30%. I then uninstalled Flash and tried to reinstall it and it's the same thing and I also tried to do the clean install and that does not work either. I don't know what's going on, but now I'm not able to watch videos or play games on my mac because it continues to be. Help, please.

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

• After buying items 11 download has started and then stopped

  11 items bought and received a card with a number of redemption on this subject. Went to the site suggested which is a look not correct and finally found the right screen.

  Entered the number of redemption, got the serial number then the downloadstarted all well and good then after about 60 percent a dialog box appears stating something like down

  charge has been arrested, and I needed to refer to an orignial e-mail. I don't have any email and you simply want to download items being entered the reference numbers for 11...

  You should be able to activate any program of PES 11 with serial number: www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

• I downloaded ie9, it does not open. a window opens as it tries to start and then stops (very quickly)

  I downloaded ie9, it does not open. a window opens as it tries and then stops (very quickly) no error messages appear.

  I tried to reinstall, ran a scan for problems, the saved settings. I can still access to safari or chrome.
  I noticed that some other features in windows now do the same thing while trying to open a new window and it does not work. I have vista 32 bit.
  IE9 is showing as a program and all the settings seem ok
  my windows will not install updates?

  Hi Robin,

  Since you are facing problems of opening IE 9 and a few other features in Windows, you can try these steps and see if it helps

  Step 1:

  Check if the problem persists in safe mode with network.

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with networking, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Windows media player, when I try to download a cd, it burns completely to 99% and then stops with an error message indicating that it may miss a codec.

  When I try to download a cd, it burns all the way to 99% and then stops with an error message indicating that it may miss a codec. How could I be missing this and how I get it back or find exactly what it is that I'm missing? Help!

  Hi jeanamae,

  the error message shows which codec is missing?

  Is there a 'additional information' icon or the link?

  Try to reduce the speed of the burn and see if you get the same question.

  B Eddie

• My software stops downloading at 50% and then tells me to contact adobe support if it continues to be.

  My software stops downloading at 50% and then tells me to contact adobe support if it continues to be.

  is this a download or installation message?

  If download, use a different browser or an another wired connection and/or a download from prodesigntools.com download manager

• Firefox has becomes slow and unresponsive after that I tried to install the addons (not installed)?

  I recently format my computer and reinstall windows 7, since it was the only way I know of to solve the problem with Firefox (I already had this problem too). I download the latest version of firefox 33.0.2 and install it. This version was super fast. But becomes slow and unresponsive when I tried to install the Add-ons. I visited the official site of firefox and searching for addons, when I tried to install addons, Firefox crashed. Therefore, it has becomes quite slow and cannot restore previous sessions. Even to type my email address, it takes more than 5 minutes and reacts more frequently (after typing each letter).
  I want to know if this is due to some viruses, or this version of firefox is not "stable".

  Hey there,

  We are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID begins with bp - and then back to your forum question but that stick in the box of "Post a response. (Please do not take a screenshot of your plant, just copy and paste the ID image below is just an example of what your Firefox screen should look like)

  

  Once you have done so, you could try the Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  I hope this helps!

  Curtis Parfitt-Ford
  Support for Mozilla

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• After you apply the fixit on windows update error 8000ffff PC starts "prosessing update 3 50%" and then stops again and again

  have had windows update problems for awhile now, 8 months or more

  I did E-mail support instructions for a few weeks with the help of computer technology

  Error 80070057

  Asked to uninstall Kaspersky AV

  same error

  Tech found the personal firewall that still on the pc of the previous installation using msconfig and unintalled using a program uninstaller for ca

  restarted and I have tried to update again and had error 8000ffff

  This led the tech to run microsoft fixit in default mode

  now, loops start mode PC rises to the small circular windows vista logo then says appliing update 3 3 50% sayes welcom and then stops, restarts, and loops on this subject.

  Can I get the pc to boot wihtout install updates?

  Tried safe mode and last good config known

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• When I try to import audio it becomes slow and deep? Help!

  Hi I just downloaded flash cs6 pro (I'm on windows 8) and whenever I try to import audio it becomes slow and deep... I'm really new and I don't know what's happening please help! (I hope this is the right place to post the discussion)

  Adobe audition is a good.  you have a subscription to the cc.

• from mac gray screen and progress bar goes to about half way and then stops

  from mac gray screen and progress bar goes to about half way and then stops

  It's probably failed hardware, take the machine to an Apple authorized service provider and get that fixed. You can locate one in your area by clicking on the Service Provider Locator authorized Apple

• This security update is constantly appearing: a security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) I successfully download the update and then it reappears to be downloaded again. ___

  Automatic updates of Windows

  This security update is constantly appearing: a security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) I successfully download the update and then it reappears to be downloaded again.

  See the sections «How to get help...» "and 'known issues' here:
  http://support.Microsoft.com/kb/954430

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.
  Read also: http://support.microsoft.com/kb/941729/

  Hope this helps, Vincenzo Di Russo
  Microsoft® MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003.
  My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213

• error 'Unable to write' 1x10001c30 address error message at shutdown began after you download Explorer 8 and then remove Explorer 8.

  "Write failed" error message during shutdown began after you download Explorer 8 and then remove Explorer 8. How can I get rid of him?

  Thank you, Matthew. I have eliminated the error message by reinstalling Explorer 8. I'll leave on my computer and the problem is solved.

• Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

  Original title: windows search service does not start.

  When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
  It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

  I no longer need it, I just backed up all my files and re - install windows XP.