Download image failed when create image asset

Similar Questions

• Profiles of DRM fails when creating EPMA Interface

  Hello

  DRM getting authentication failed when creating profiles of EPMA.

  I tried several times but his failure to get. do I need to do something in DRM. Please some guide.

  Hello

  Please follow him below the steps and, hopefully, this should solve your problem

  1. connect to the DRM application server.

  2. launch the DRM configuration console

  3. click on the Application to change

  4. on the register EPM tab, click the button cancel the registration.

  5. in the identification information section change of user name and password for the correct credentials (as a general rule, the user is epm_admin)

  6. click on the button Save

  7. Enter the credentials of the user CSS (as a general rule, the user is epm_admin)

  8. click on Save Configuration

  9 restart DRM Services

  10. try to create an import profile in EPMA

  Thank you

  ~ KKT ~.

• Skype 5.3 unable to download message failed to create device directx; then Skype crashes and I have to remove it

  I'm unable to download the latest version 5.3 of Skype; I get the message unable to create directx device. then Skype crashes and I have to remove it.    What I am doing wrong?  I have no access to Skype.

  Hi Mary,
  I suggest you to reinstall Direct X and then Skype. All this after a clean boot!
  http://support.Microsoft.com/kb/179113

  Also, make sure that you try to install the correct version of Skype
  https://support.Skype.com/en-us/category/tech/

  hope this helps,
  B Eddie

• trying to connect my Pantech P9050 phone on computer to download images and it keeps failing

  trying to connect my Pantech P9050 phone on computer to download images and it keeps failing suggestions?

  Hello

  1. what operating system is installed on your computer?

  2. it linked earlier? If so, remember you have changed your computer?

  3. you receive an error message?

  4. what exactly happens when you connect your phone?

  Provide more information to solve problems. Refer to this article How to ask the question: http://support.microsoft.com/kb/555375

  You can also post your questions in the forum of Pantech: http://forums.att.com/t5/Pantech/bd-p/Pantech

• How to create multiple thumbnail images while creating the Image assets

  Hi all!

  
  

  I have a requirement to create several thumbnail images (of different sizes), while creating new assets of image. These vignettes must be associated with different attributes after the recording of assets. I thought you used miniature filter, but I read that it uses a library of swing, it's very very inefficient memory-wise and we can experience the memory leak and crashes with only a very limited number of images... Another solution is to set up the filter citing ImageMagick with a system exec: it's fast, it does not have the memory and it also generates a much greater quality of thumbnail image resizer that comes with swing.

  
  

  What do you think, and how can I implement this?

  
  

  Thank you very much!
  

  Hello Elena,

  We noticed some performance issues in our current client, so we changed the miniature filter by default:

  A temporary file is no longer used for the input image. The source image is used directly, because it is not changed by the thumbnail generator.

  This avoids some performance issues, we have detected. First of all, because of the way the image has been copied (a byte is read and written each time), and second, because of some file systems environments run badly.

  In addition, it relies on "deleteOnExit", which can produce an impact on the performance of the application server, as the JAVA virtual machine must maintain a list of files to delete when leaving, and which consumes memory. It is even more problematic on servers that are not restarted very often.  And if at the end the application server is not normally off, these files would not be removed.

  On the other hand it seems that the thumbnail generator is not necessary that the image source file ends with the extension of the right.

  Now we use the provided source image directly, it's a ".tmp" instead of a file (for example) the file ".gif".

  It will be useful,

  Gerardo

• Failed to create a System Image

  I have Windows 7. In the past, I've created several images of system to my external hard drive of an application in accessories. Now it is possible from the control panel by selecting "return of a computer". The computer says it will create a system for my backup hard drive image, but it never gets there.

  Original title: create a System Image

  Hello

  Welcome to the Microsoft community.

  I understand that you can not create the system image.

  I will definitely help you with this.

  Please provide the information below.

  1. do you have any error message when creating system image?

  2. have you made any changes to the pc before that?

  I suggest you go through the below methods:

  Method 1: Try to run the system maintenance Troubleshooter:

  1. Press Windows + R key.

  2. Type command and press ENTER.

  3. Click on troubleshooting.

  4. In the left pane, click View all.

  5. In the list, click System maintenance and run the troubleshooter.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Also check out the link below:

  Restore your computer from a system image backup

  http://Windows.Microsoft.com/en-us/Windows/restore-computer-from-system-image-backup#1TC=Windows-7

  Back up your programs, files and system settings

  http://Windows.Microsoft.com/en-us/Windows/back-up-programs-system-settings-files#1TC=Windows-7

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• How to activate a part of an image with a link when creating emails?

  How to activate a part of an image with a link when creating emails?

  Hello. You can do this with an image map, but there are some questions that you need to consider before using a. Check out this blog for some thoughts on the subject:

  http://www.campaignmonitor.com/blog/post/3475/image-maps-in-HTML-email/

• Not enough disk space when creating ISO from DVD image

  I use first elements 14.1.  I encountered a very strange problem when you try to create an ISO image DVD, editing content in the available space (space required is 4.35 GB 5.12 Mbps throughput).  I get the message ' not enough space for the engraving', even if the drive I use has more than 1.5 TB of free space!  All files work in Premiere Elements are on this drive.  I cleaned all the relevant elements of the first, work folders before attempting to create the ISO image.

  Here's the weird part... If I try to create an ISO image of a Blu - Ray disc, editing of content space (space required is 18,87 GB to 20.19 Mbps bitrate), I don't get the error message.  I can create the ISO image of Blu - Ray with no problem!

  I tried to reboot several times.  I completely uninstalled EP 14.1, rebooted and reinstalled with the same results.

  Someone at - it ideas?  Has anyone ever encountered this?

  The running time is 1 hour 50 minutes.  I chose "Insert the contents of the available space", just as I did when creating the ISO from Blu - Ray.  PE shows that seeks to create a 4.35 GB file, which should easily fit on a 4.7 GB DVD.  I just tried open the same project on another computer and the same generation of PE, with the same result.

  I think I discovered a bug freak EP Version 14.1 (20151208.daily.895401).  The exact length of the film is 1:50:16:08.  I discovered that if I increase or decrease the duration of the video of just 1 frame, I is no longer the mistake and am able to successfully create a picture ISO of DVD!  Go figure.

  I would be interested to know if anyone else can duplicate this fault!

• I created a web gallery in lightroom 4 - y has a capacity 'download image' or is it just for viewing?

  I created a web gallery in lightroom 4 - are there capacities 'download image' or is it just for viewing?

  Thank you.

  The galleries of LR are not protected, right-click so a visualization of your image will be able to right click and save your image on his computer.

  That said, if you are looking for an option 'Download a copy of fullsize', which does not exist in one of the galleries LR.

• Creating custom themes and download images in the directory is online

  Hi there everyone, it's been more than a year I visited this forum!
  
  
  My team has a period where we are required to provide a demo of our development ideas to another establishment and application development quick, that we decided to use Oracle Apex. It's good to work with her again! I want to know how to create a custom theme and download it in the development apex.oracle.com environment. Application templates need images and I usually use an FTP client like filezilla or the bitkinex to download image files in the virtual directory is in my local computer so I can use them in my designs. However, I want to create a template like this for our test area using apex.oracle.com. I'm not sure what I'm supposed to do, has anyone tried this before?
  
  Thank you very much
  -C

  How much space does take to application? I use a company hosting that costs $19 a month to host my APEX stuff. Allows me to ftp and download themes and other too via local ftp client...

  http://www.enciva.com/index.html

  Thank you

  Tony Miller
  Webster, TX

  What happens if you were really stalking a paranoid schizophrenic... They would know?

  If you answer this question, please mark the thread as closed and give points where won...

• I downloaded a game on games of freeride and when I push play for free he says failed to create the Direct3D device

  My grandson got to my computer and I don't know what he was doing. Some of my games, etc no longer work. I don't know if the things were deleted which are supposed to work or not. HES 8, so you can imagine what can happen. Thank you very much, your all so wonderful here. Nadine

  Hello

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in a clean boot and check if the problem still persists. Link below will help you to start the computer in clean boot: http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7 after the troubleshooting steps.
  

  Step 2:

  If the problem persists, Uninstall and reinstall the game and check.

  You can also follow the procedure suggested by Rayellis in this link and check if the problem persists

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/critical-error-failed-to-create-DirectX-device/a2061d79-eec4-4363-bc65-83fb1b0adb12

• Download Images dynamically

  Hello

  Is it possible to download images dynamically and add them to an ImageView?

  Ive got a listView withcustom ListItem elements, which are essentially an imageView and a label. After you have added the list on a page I would like images in a dynamic list and put them in the ImageViews of my custom components displayed on my listView.

  I already download the image and create a bb::cascades:Image (QByteArray). But I can't find a way to assign them to the custom my components in the ListView. I got this error in the console:

  Error: Access to ListItem.indexInSection on a node that is not the node root of a Visual list.

  Code of P.S.:any would be great!

  So I developed this class which will allow you to display the internet dynamically downded images without having to be stored in the unit:

  /*
   * RemoteImageView.h
   *
   *  Created on: Oct 2, 2012
   *      Author: aluialarid
   */
  
  #ifndef REMOTEIMAGEVIEW_H_
  #define REMOTEIMAGEVIEW_H_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  
  namespace bb {
      namespace cascades {
          class Container;
      }
  }
  using namespace bb::cascades;
  
  class RemoteImageView: public CustomControl {
      Q_OBJECT
      Q_PROPERTY(QString url READ URL WRITE seturl NOTIFY urlChanged)
  
  public:
      RemoteImageView(Container *parent=0);
      virtual ~RemoteImageView();
      Container* mRootContainer;
      ImageView* imageView;
      Q_INVOKABLE void loadImage();
      void seturl(QString url);
      QString URL();
  
  public  slots:
      void onImageLoaded(QNetworkReply* reply);
      void onurlChanged();
      signals:
              void imageUnavailable();
              void urlChanged(QString url);
  
  private:
      QString murl;
  
  };
  
  #endif /* REMOTEIMAGEVIEW_H_ */
  

  /*
   * RemoteImageView.cpp
   *
   *  Created on: Oct 2, 2012
   *      Author: aluialarid
   */
  
  #include "RemoteImageView.h"
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  
  RemoteImageView::RemoteImageView(Container *parent) :
          CustomControl(parent) {
      //Q_UNUSED(parent);
      mRootContainer = new Container();
      mRootContainer->setLayout(new DockLayout);
      imageView = ImageView::create().image(
              QUrl("asset:///images/defaultarticlelist.png")).horizontal(
              HorizontalAlignment::Center).vertical(VerticalAlignment::Center);
      imageView->setScalingMethod(bb::cascades::ScalingMethod::AspectFit);
      mRootContainer->add(imageView);
      setRoot(mRootContainer);
      connect(this, SIGNAL(urlChanged(QString)), this, SLOT(onurlChanged()));
      //  connect(mRootContainer->layout(), SIGNAL(CreationCompleted()), this, SLOT(onurlChanged()));
  
  }
  
  RemoteImageView::~RemoteImageView() {
      //delete mRootContainer;
  }
  
  void RemoteImageView::loadImage() {
      qDebug() << murl;
      QNetworkRequest request = QNetworkRequest();
      request.setUrl(QUrl(murl));
      QNetworkAccessManager* nam = new QNetworkAccessManager(this);
      bool result = connect(nam, SIGNAL(finished(QNetworkReply*)), this,
              SLOT(onImageLoaded(QNetworkReply*)));
      Q_ASSERT(result);
      Q_UNUSED(result);
  
      nam->get(request);
  }
  void RemoteImageView::onurlChanged() {
      loadImage();
  
  }
  void RemoteImageView::onImageLoaded(QNetworkReply* reply) {
      if (reply->error() != QNetworkReply::NoError) {
          emit imageUnavailable();
          return;
      }
      Image image = Image(reply->readAll());
      imageView->setImage(image);
  
  }
  void RemoteImageView::seturl(QString url) {
      if (murl.compare(url) != 0) {
          murl = url;
          emit urlChanged(murl);
      }
  }
  QString RemoteImageView::URL() {
      return murl;
  }
  

  See you soon!

• Problem: getting the return code 7 downloading image

  Hello everyone. I get the response from the server in the return Code: 7 when downloading images to my server. Can someone help me? What does this return code?

  Thanks in advance.

  I have it. Its because my memory server was full. Thank you.

• Download images on a separate thread?

  I use http://supportforums.blackberry.com/t5/Cascades-Development/Download-Images-Dynamically/m-p/1927137#...

  successfully, but it seems that everything is done on the thread of the event, because the user interface is not created before that all the images (12 atm, but can be more) are downloaded.

  How to move the download in another thread with Qt? Is there a queue of the executor who would be appropriate to use?

  And what do I come to the event later like invokeLater thread in bbjava?

  Just answered my own question:

  There is a simple mechanism, it is QtConcurrent
  http://doc.Qt.Digia.com/stable/qtconcurrentrun.html

• Cannot download images from Canon to the computer

  I have a new Dell running Windows 7.  I installed the software for my Canon PowerShot SD550 camera, but I can't download photos from my camera to the computer.  I tried to uninstall, but it won't let me.  Is this a compatibility issue.  I have a camera perfectly, and it saddens me to think that it is useless on Windows 7.  Any help would be appreciated.

  Original title: I have a camera Canon PowerShot SD550.  I installed the software on the new computer to Windows.  I can't download photos from my camera. 7

  Hello

   
  1. what happens when you tried to download images from the camera?

  2. do you get an error message?

  3. how you connect the device to the computer? What is USB?
   
  We have checked and checked the camera Canon PowerShot SD550 is compatible with Windows7.
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Canon%20PowerShot%20SD550%20&OS=32-bit
  
  Method 1:
  
  Step 1: I suggest you to connect to another computer and check the issue.
   
  Step 2: Try to connect to another USB port and check with the question.
   
   
  Method 2: Run the troubleshooter of material
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 3:
   
  If you have connected the device via a USB port to the computer. Make sure that you follow these steps to download pictures from the Canon.
  a. turn on the Canon camera and put it in playback mode by pressing the button with the triangle "play" on this subject.
  b. plug the small end of the USB cable to the device and plug the other end into a USB port on your computer.
  c. click on the "Start" button in the lower left corner of your desktop and click on "my computer.» Double-click the icon of the gun in the left pane of the window "Workstation". If another file exists inside the folder of the Canon, so open that until you reach the image files.
  d. Select the files to be transferred to your computer. Hold 'Shift' click on the two separate files and it selects all of the files between the two. Otherwise, hold 'Ctrl' to select multiple files that are not adjacent.
  e. click on 'get images from the camera' If Windows recognizes the Canon as a camera 'Scanners and camera,' Wizard which will guide you through the download of your photos on your computer and remove them from your camera. Click on 'copy selected files' if 'get images' is not an option, this will open a dialog box where you select the location to which you want to download your photos.
   
  Let us know the results.
   
  I hope this helps.