Download LabVIEW Development System 2010 SP1 64 bit
Hello
I am looking to download the development system LabVIEW 2010 for 64 bit on windows Server 2008, but I can't find link: the only one I found is a 2011, and I don't want to upgrade the project for 2011.
Best regards
HI V. f.,.
Simply call your local representative of NEITHER, they will help these issues...
Tags: NI Software
Similar Questions
-
A link to download the development for the LV 2009 64-bit software
We have a license for the 32-bit version of the development and the app Builder. According to NOR gives us rights to the 2009 64-bit also. I can't find a download of the system Base 64 bits 2009 dev. I see F2 and F3 patch? I guess that there is a basic first installation, then the patches. Any help is appreciated
Steve
Looks like it should be: http://www.ni.com/download/labview-development-system-2009-sp1/3343/en/
-
Hello
TS4.2 LV8.6.1
I have a strange behavior of TS. All of the code works well under the development system. But when I pass the server of LabView runtime LabVIEW development system then, during the call one of my screws (action step calling the LV adapter), I have the window 'vi search' open looking for the Key.vi to write (one of the interns LV VI). Finally, is the write file Key.vi and TS is happy, however, I don't want it to happen on the production floor.
Is this a bug or I have some sort of option or something?
Why this does not happen under the development environment? What is the mechanism?
K.
(1) more complex nodes in LabVIEW are stored in vi.lib. This is not uncommon. Are not only very basic items (add, subtract, table functions, etc...). They are usually yellow and you can not open them.
(2) they need to go somewhere, and vi.lib is the standard location for all built-in screws
(3) instr.lib is very similar to vi.lib, just a different location. LabVIEW stores a relative path for the screws here called in. This path does not exist with the runtime, although TestStand will add it in the search directories if you installed LabVIEW Development.
(4) if it is possible to use LabVIEW to do this, there are more ways to get into trouble, because doing it this way would never update your sequence or find problems that would be specific to TestStand. Is there a reason why you don't want to use the TestStand deployment utility? Behind the scenes, TestStand calls in the same frame as LabVIEW for the deployment, but do it with more knowledge that LabVIEW alone would have. This can be done, but there are more considerations, and you can meet potential problems. Unless you have a good reason for this, it is generally not advisable.
I recommend reading the chapter on deployment in the handbook here (Chapter 14):
-
Where can I download LabVIEW NI Developer Suite 2012 64-bit?
We have for LabVIEW NI Developer Suite 2012 32-bit installation DVD. On the support page for LabVIEW 64-bit vs 32-bit FAQ, it says to download the 64-bit version in the "Windows Setup can be downloaded via the drivers and updates: LabVIEW 64-bit section of our Web site", but the Developer Suite for 2012 64 bit is not listed.
Please notify.
Yes, you need SSP to make from this link. Really should have kept active ssp. Try the ftp site - http://download.ni.com/evaluation/labview/ekit/other/downloader/
-
Need link to download LabVIEW 2011 Windows 32-bit SP1
I looked up the link to download LabVIEW 2011 SP1 32-bit Windows for an hour. I thought it might be incorporated in the version SP1f2. Nope. SP1f1 version. Nope. Research of ni.com do not, Google does not find it, I'm stuck.
How about this?
-
Development system LabVIEW 2011 fails to install
I just tried several times to install my new copy of LabVIEW 2011 Suite of Dev, but get an unknown exception (with no details - see photo) from the beginning of the installation of the development system (32-bit English). I restarted and closed all applications, including the virus scan, but still the same. I use Windows XP Pro SP3 and have LV 8.6, 2009 and 2010 is installed. I'm completely baffled as this type of problem has never happened before, and there is no information on the cause of the exception.
Mike
-
The PSC-2000 is programmable with LabVIEW 2010 SP1 / Real Time 10.0.1?
I have a PSC-2000 camera I want to use for a small project. I see on the site OR that it is said»
- "Support for LabVIEW Real-time 8.5.1 and earlier" and "Support for Windows Vista and earlier versions. It means that I can not use the latest version of LabVIEW (2010 SP1) with time real (version 10.0.1) running on a Windows 7 computer? If not, what version of LabVIEW, real-time and operating system do I need?
-
LabVIEW Professional 2012 development system
Please provide us the link to download 2012 LabVIEW Professional Development System.
Look here:
http://download.NI.com/evaluation/LabVIEW/ekit/other/Downloader/
Search for files beginning with "2012sp1LV" and pick your flavor.
-
How do we install support for labview 2012 sp1 64-bit
Hello
I downloaded and installed Labview 2012 sp1 64-bit and
the installation requires a drive support.
Where can I download a dvd for 64-bit Labview support?
Thank you
desiko
You must install the drivers again so that it will install support for the 64-bit version of LabVIEW.
-
NOR Developer Suite 2010 is not LabVIEW 2010
Received new drives which read "NI Developer Suite 2010", which is misleading, because it's not LabVIEW 2010, is LabVIEW 2009 SP1. So now, we are not Developer Suite / LabVIEW.
Difficulty...
-
I installed 32-bit and 64-bit LabVIEW 2012 SP1 on Windows 7 X 64 computer. After that, I installed SP1 FPGA Module. While module FPGA completely installed in the 32-bit version and could develop projects fpga, FPGA interface has not installed the 64-bit version. Anyone had this before question?
The document 5WMF8NQ2 knowledge base says it's doable.
I have tried to repair the installed module, remove and then reinstall the module. Nothing helped me to get the FPGA interface on a 64-bit host VI. Any suggestions? Addition of the individual screws through the range of editing functions like a tedious process and the palette is not completely functional.
I solved the problem. Had to repair each driver separately for LabVIEW 2012 SP1 64 bit installed on the default drive. You may need to copy paste files to the folder that it installed in function.
-
[Bug]? LabVIEW 2010 SP1 - Device Drivers Incorrect link
Hello
This page link to download LabVIEW 2010 SP1 Device Drivers Feb 2011 on this page points actually to November 2010.
See you soon
-JG
-
LabVIEW Communications System Design Suite with 10 64-bit Windows
I would like to know is possible to run LabVIEW Communications System Design Suite on Windows 64-bit 10. According to the Web site of NOR, he says that he only supports 64-bit Windows 7. So is it possible to run it on Windows 64-bit 10.
Please guide.
Thanks in advance.
Hi josephkirmani,
Currently LabVIEW Communications System Design Suite is not supported on Windows 10-64 bit. You may be able to make it work on your machine, but unfortunately it is not officially supported outside of Windows 7-64 bit.
BeenCoughin
-
Patterns of data record TestStand 2010 SP1 default shared this cluster in two tables stored as binary data, resulting in two graphs displayed in the report: one for data and one for X data Y. We need the elements X and Y, couples on the same graph. This cluster is marked for logging as a step output variable. It seems possible to add a table "PROP_XYGRAPH" (similar to the PROP_ANALOGWAVEFORM) to the schema to simplify the other treatment after the database record, but how can we get the Builder, to accept this type of data is displayed correctly? XY graphics come from LabVIEW 2013 SP1 exclusively as a cluster of two matrices, usually between 500 and 1,000 items long.
... Geoff.
Hello Geoff,
Had a few resources for you to check. Let us know if none of them work for you.
Inserting an image of LabVIEW Control:
<>http://www.NI.com/example/30736/en/ >
Display of graphics in TestStand:
<>https://decibel.NI.com/content/docs/doc-38945 >
Display of measurement data in the shape of graph:
<>http://zone.NI.com/reference/en-XX/help/370052J-01/tsref/infotopics/measurement_data/ >
See you soon!
-
The CVI 2010 SP1 download link works?
The downloaded file from SP1 link seems to be the unserviced pack version. After the 'install' which took place much too quickly, the help > about shows LW/CVI 2010 Version 10.0.0 (360). Am I missing something or am I just too early?
Hello
There has recently been some changes made to the experience of downloading on ni.com. To get the latest download for the ICB, please visit ni.com/downloads. There you should find the LabWindows/CVI 2010 SP1 download.
Let me know if you have any problems,
NickB
National Instruments
When I tried to add a new target under LabVIEW 2010 SP1, the PSC-2000 was not among the choices.
As the support NOR documents indicate, you need LV version 8.5.1 or earlier to program the cFP-20xx devices family. Version 8.5.1 of LabVIEW does not work under Win7. You will need Windows Vista or something earlier like XP.
Maybe you are looking for
-
Firefox is totally slow and unresponsive
Hello! I need a little help. My FF is totally slow. I don't know where is the problem. I opened only a few tabs and it is loading too long, maybe 20 seconds or more and also "not responding" for a few seconds. I've never had these problems in a way.
-
Satellite P200 (PSPB3E) - HDMI audio driver, Windows XP Home edition
Hello I use Windows XP at the moment and I can't seem to find a driver to get the sound on the functioning of the HDMI port. I have the latest drivers for the graphics card using mobility modder. The sound works without no driver install Linux ubuntu
-
Can I buy or make a backup of disk for me to restart my computer should it crash and it does not start at the top
-
Get property sheets Serif fonts
Original title: Control of system fonts I always try to get the serifs on policies of property sheets, tabs, etc.? I realize that I can't (easily) change the bitmaps embeded fonts.
-
whenever I try to use my image file, windows Explorer sets up an error message saying that need to stop, I can't go to my photo, help?