Download Missing 6480 HP all-in-One button

Similar Questions

• All-in-one HP Officejet 2620: A5 format missing in the all-in-one printer HP Officejet 2620

  I use a HP Officejet 2620 all-in-one printer and I need to print some documents using paper size A5 format but not miss the formats available on the A5 format list box.
  I want to know if there is a way to define this format.

  Hi lucausa75,

  You are welcome!

  To answer your questions:

  I would recommend the HP Deskjet 990c driver, as it supports printing A5. When you change to this driver it can restrict your printer to print only as the HP Deskjet 990c is a printer function only. In order to restore the features of scanning, etc... You may need to return to the driver HP Officejet 2620. But it is possible that scanning, etc. may continue to work with the original drivers as well. The only way to know for sure is to try it and test it.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this answers your questions, and I thank you for posting!

• Tried to download Kodak ESP C310 All in one Printer

  I am trying to install my Kodak ESP C310 printer. I have an Acer 5552 portable 64-bit. I can't use this wireless - no problem. But when I try to configure the printer it does not recognize. I tried to download the all-in-one firmware of the printer, but my laptop does not recognize the printer, she needs to do. Would appreciate ANY help. I'm not technologically conscientious so its perhaps my fault. !!!

  I tried to download all in one printer firmware

  To install the printer, you must download and install the drivers, which are not the same as the firmware.

  Kodak ESP C310 drivers:
  http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/true

  Installation instructions

  1. Check that your computer meets the system requirements.
     NOTE: WINDOWS XP 64 - bit Operating System only is not supported.
  2. Disconnect your all-in-one printer from your computer.
  3. Make sure you have connected to the computer using the administrator account.
  4. Close all programs.
  5. Download the software on your computer.
  6. Double-click the *.exe file, and then follow the on-screen instructions.
  7. Once the installation is completed, connect your all-in one to your computer.
  8. Select Start > programs > Kodak > Kodak AiO Home Center.

• Missing information on all bars reading button

  I am using Captivate 4 and the information button is absent from all the playback bar options. In the help document it says that the Information button should appear in every bar in playback. Does anyone else have this problem?

  Hello

  This button is present for the default playback bar.

  I think they took from others because of all the suggestions made ban people. In fact, it would be nice if it were optional.

  As following for Captivate development is underway, you should consider the development team, express your feelings about it. Do you so by sending a form of Wish. (The link is in my signature)

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• I can't download the driver for HP Photosmart C4150 all-in-one

  I can't download driver for printer all-in-one HP Photosmart C4150.

  Downloads of software & driver - range of all-in-one printers, HP Photosmart C4150

• problem of download/install HP psc 2355 all-in-one driver

  With the help of the operating system of windows xp with service pack 3. Printer model hp psc 2355 all-in-one. When the driver download/install is done I get the pop-up window

  2.5 FEAD OPTIMIZER.

  "The device is not ready".

  File:C:/Temp/hp_web release

  Error code: 21.1812.01.2.25016

  Please send error to [email protected]

  Using the USB connection method.  I had my computer repaired by Geek Squad and need to reinstall my printer driver. Any help much appreciated. I tried all that I know is not much.

  Hello

  This message is related to the downloaded package that comes with the setup of the netopsystems.com created install creator.

  Solution:
  1. perform an uninstall of level 3.

  1. turn the all-in-one off and disconnect all cable USB/Ethernet of all-in-One to the computer.

  2. Insert the CD-ROM of all-in-one in the computer. Cancel any windows installation that appear.

  3. click on start in the bar of tasks and then run.

  4. in the command box, type command, and then press Next:

  X:\Util\CCC\Uninstall_L3.bat

  (X: is the drive letter of the CD-ROM the CD-ROM of all-in-one is in, if the CD-ROM drive letter is "the command must be D:\Util\CCC\Uninstall_L3.bat)

  2. use the Windows Cleanup utility and remove all entires of netop software systems or HP AiO

  This is the web link to download the "Windows Cleanup utility".

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Below listed Remove HP related entries if they are registered.

  The HP Imaging device functions
  Documents HP Viewer
  HP Photosmart Essential
  HP Image Zone
  Gallery HP Photo and imaging
  HP Photosmart, Officejet, Deskjet, or Scanjet, (with the name version number and product software)
  The HP software update
  HP Share on web
  HP Solution Center
  HP Director
  HP memories disc
  Greeting Card Creator 32
  NOTE: Do not remove all the elements other than those mentioned above.

  3. download the package again and re-install.

  Here are the web l ink to download and install the all-in-one software for PSC 2355 all-in-one drivers

  FTP://ftp.HP.com/pub/softlib/software4/COL10513/OJ-30616-1/nn_rub_w01_Americas_Euro1.exe

  Installation instructions:

  (1) disconnect the USB cable from the back of the computer.
  2) double-click the downloaded file and install the all-in-one software, in the middle of the installation, it will prompt you to connect the USB cable then connect it and continue with the installation.

  In my view, these solutions have helped to solve the problem.

  Kind regards.

  Monalisa.

• drivers for my HP 7410 all-in-one printer

  Can I download drivers for my all-in-one HP 7410 printer on my laptop, and transfer them on a disk, and then on my desk. I don't have a wireless to the desktop.

  Thank you

  Hey Heezie. You can certainly do. Then tranfer to another computer, you will need some sort of storage such as a USB device, a disc external hard or you can burn them on a CD. What operating system do you use?

  Here is the link to the drivers: Driver & Software Downloads - all-in-one printer, HP Officejet 7410

  You provide me what operating system you were using, so I couldn't give you the direct link to the drivers. In the link above, you will need to choose your operating system. Select the driver tab, and then download the "full feature drivers."

  If you have problems to find the pilot informed me to your operating system and I will point you to the download.

  Thank you

  Sean

• OfficeJet 7210 all-in-one

  I have had this printer for about 5 years, running on an XP system.  I recently bought a new computer running Windows 7.  Windows 7 found the drivers to operate the printer and it is high and fine.  However, I lost the ability to scan with the printer. I have the old CD (version 4.7.1) but this is for XP.  I can't install software to run my scans on the part of the printer scanner?  If not, what are my other options?

  Hey there scott77, welcome to the Forums!

   

  I noticed that you bought a new computer now on Windows 7 and looking for the full functionality of driver and software so you can have the capabilities of scanning back as you did with your XP.

  The good news is, you do not need the diskette, given that a download available that you can use to install the software.

  Click here to start and click on download: HP Officejet 7210 all-in-One Printer

  I really hope this helps you! Feel free to write me back on your progress!

  Best wishes

• All-in-One L7550: all-in-One printer L7550 stop working after a Win 10 update

  In the last two days my printer has stopped working after many updates to Win 10.  Functions in fact any printing has stopped (swirling points) to include my PDF SW.  I downloaded the last SW all-in-One and tried to install it.  The first thing that happened is that he tried to remove the previous SW.  Hooked to halfway through it.  Then, it was a nightmare.  I can't get the rest of the SW uninstalled nor can I install the latest SW.  I even tried to install the previous SW in Win 7 compatibility, but after extraction it just stops.  Tried to install the current version in Win 8 conpatibility, but it also wrong on.

  Any ideas wher can I start?

  Welcome to the Forums of HP, @CharlieCC,.

  I hope to help you with installation and uninstallation issues you are having with your Officejet L7550 on Windows 10. Before you get any software troubleshooting, try to make a copy of the front of the printer. If copies work fine, continue with the steps below to work on the issues of software!

  Step 1: perform a level 3 Uninstall to remove completely all the files to your system printer.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop: all-in-one printer, HP Officejet Pro L7550
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe (or .bat).
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• OfficeJet all in one printer 5510 installed: no printing

  I downloaded the officejet 5510 all in one, message stood ready to work, click it to print printer: error message, what do I do now? I just can't get anything to print. Thank you.

  Kunick wrote:
  I tried the copy, nothing copied, I made this about 4 times still nothing. I install and I got 3 colors on a sheet. No copy.

  What was the error message?  When you try to copy is a blank page out or are there flashing lights or an error message?  If there is no impression then I suggest the contacts of the cartridge cleaning as shown here.

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• OfficeJet 5740 e-all-in-one: the printer display shows 'downloading' message despite no web service implemented

  I got a new Officejet 5740 e-all-in-one and put in place a few days ago. It is implemented in a router which is also a modem.  I've implemented any web service.  My network is password protected, and I'm the only one on this subject.

  A couple of times I arrived in front of the printer and there was a screen that says that there is a current download, and he showed the percent completed. This surprised me because I have not implemented in web services for the printer.

  I cancelled the download, both times.  The second time I accidentally typed the screen again.  I don't know what button I hit, but it has printed a message that says that my printer is now web enabled.  He also says that my printer has an email address.

  I went into the web installer, and it seemed to me that I had not implemented the web.

  1. what could it possibly download?

  2. If it does not complete a download while I'm not looking for, will there be a record of this?

  Hi @Andrew111,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a 5740 Officejet from HP printer e-all-in-one with a computer of Windows 7 and you noticed that the screen of the printer said there was a current download, which you surprised because you but you did not set up web services. I would like to help with that.

  You mentioned that the printer has its own e-mail address. Web services have been enabled for the printer to have an address of mail @hpeprint.com. It is possible to disable the ePrint and printable HP once the HP Web Services has been enabled.

  The download that was underway was probably a printer update, which will come by automatically. Nothing to do with the computer. I don't think there is a record of updates of the printer anywhere.

  Please let me know if that answers your question...

• Scan button disabled HP5510 all-in - one Win7

  HP5510 All-in-One
  Win7
  
  Please give me a link to the thing that I have to get the Scan key on the Control Panel before work? I tried just about everything I could find here and I must be missing something, I don't know what. Impossible to install from the CD original, says I need administrator rights (even if I'm using setup.exe as an administrator) and I don't have the right OS for the disc.  Cannot find the complete software recommended here. Tried printing HP and doctor Scan with no joy (says I need all the stuff that is on the CD!). Tried to install the framework of Solutions HP too. No joy. He always asks the Solutions Center on the CD.
  
  I need this scan button. My camera is not right next to my PC and have to go back from the PC to the scanner is ridiculous.
  
  If there is no way to get the scan button for more work, why not put to work (other than what is obvious and that is to make us buy another device)?

  I found my solution.  I installed the device on an old PC I had in stock, who always had WINXP top.

• Software to scan picture and analysis of documents are missing from the installation of a all-in-one HP Photosmart 2608

  I had installed the software and drivers from the disc that came with the all-in-one multifunction printer HP Photosmart 2608 on Windows XP Home SP2. The menu Manager HP had icons for software photo Scanner and scan a Document and setting options for such software. After I installed SP3 and update the HP software to the latest version (installed by using the full version downloaded from the HP website), these two icons and software are missing by HP Director and as well as the PC.

  I ask that the method to get the software from the HP website and install these software only while the HP Director will fill up with these two icons of software and definition for these two software options can be provided free of charge. Or, please provide me the solution so that these two software installed on my PC.

  Thank you.

  This can help in scanning problems:

  http://support.HP.com/us-en/document/c02114802

  But this document specifically addresses the Director HP scanning:

  http://support.HP.com/us-en/document/bpu00781

• Download all-in-one problems driver HP psc 1350

  Hello

  I have a Toshiba laptop and a printer all-in-one hp psc 1350.  Both worked fine until Sunday.  Now the printer will not work.

  The light on the printer is constantly on when it is attached to the power, I can press the button, so it doesn't seem to be broken, but the light does not turn off.

  When I remove the power cord, the lights to scroll the Panel of the printer (and the button light goes off momentarily) then the light on stays on and will not turn off.

  I did not download the updated driver from Windows Update or all Web sites automatically or manually - TOSHIBA USB DVB-T/analog hybrid Tuner (391 KB).  Still, the download fails. I also tried installing Microsoft FixIt, but he tells me that he has no problem.

  Does this mean that the driver is the issue, or do I have to buy a new printer?

  Thanks for your help.

  Hi Gerri_31,

  I understand that you are not able to stop the printer with the power button.

  Thank you for your response.
  I'll be happy to help you with this.

  I'd do a power reset to see if that will solve the problem. When the printer is still lit, disconnect the power cable from the back of the printer, press and hold power for 10 seconds to drain any power, if the printer has external power supply with a detachable power cord unplug for 15 seconds and reconnect it. Then, disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  I have provided a document for power issues.

  The HP printer power on not or answer.

  If these steps do not resolve the problem, so that I would recommend to call the HP Technical Support
  more help to see what other options are available to you or to know the
  trade and commerce to the top of the program.

  Contact HP worldwide.

  I hope this helps.
  Thanks for posting on the HP Forums. Have a great day!