Download all-in-one problems driver HP psc 1350

Similar Questions

• PSC 1350 all-in-one: HP Director for PSC 1350 all-in-one - using Windows 10 (64-bit)

  Hello!  I recently had a new hard drive installed on my Samsung laptop year-and-a-half-year-old, as well as 10 (64-bit) Windows as well. Instead of using the original installation disc for my printer range all-in-one HP psc1350 (bought 1/2004), I have used your site and just did a download tonight HPPIW. EXE .  My question is: I do not see the original HP Director on the desktop now after the above file download. The copying, printing, scanning are all working well, if that's fine! So all the "Director" now wonder, if I can get in a way that - since the original my installation disc or HP support Web site? Thank you, CR-Issquah (26/08/2015, 21:00 - PT)

  Hello

  HP Director has been supported only for your printer up to Windows XP, since Windows Vista full features software is no longer available for your printer, and there is no HP Director application or provided HP solutions Center.

  You can follow the following document which lists no available workaround solution and the limitation of the provided solution:

  http://support.HP.com/us-en/document/c04740294

  Shlomi

• HP Officejet 4630 e-all-in-one: problem of margin Officejet 4630

  I need to have a few very small margins on a document.  Even if I set the margin to 0, when I print it is always about a 1/2 inch margin and cutting off content that shows well on the page mode.  I use a Mac with os x Yosemite.

  Help please!

  Hello @lauriekeys,

  Thanks for getting back to me about this issue. I'm sorry to hear that the setting without borders could not solve your problem. Now, I'm going to make sure that your driver is properly installed on your Mac OS X 10.10 Operating System. On Mac OS X 10.10 sometimes a generic driver from Apple AirPrint will load on your printer and gives you only the basic printing functionality. To ensure that this is not the case, can I please have you perform the following steps:

  How to check the driver:

  1. click on the menu Apple and then click on System Preferences.

  2. click on Print & Scan

  3. click the name of your printer on the left side, click the sign minus (), then remove the printer.

  4. click the sign plus (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer in the context menu

  

  6. click Add to add the printer to the list.

  7. close Print & Scan

  Once the correct HP Officejet 4630 e-all-in-one printer driver is checked during loading, please try printing your document again.

  If the issue persists, please should I tell you:

  1. what type of program you are using to print the document with the small borders of?

  2. What size is the page that you print with small borders (letter, legal, 4 X 6, etc.)?

  Please let me know if the steps I have provided resolve your problem of margins. I look forward to hear from you!

• Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

  Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

  Tried the Canon support? That would be my first port of call...

• HP DeskJet Ink Advantaje 4535: HP DeskJet All in One-4535 driver problem

  Hello, I do not know if this has been posted before, if it were, I'm sorry.

  I recently bought a printer from a store in my country, HP all in one ink advantage 4535. The box came with a small cd with software (4530 all in one set), but I use a macbook air with no CD is useless. I could not find the driver for this printer anywhere on the web or on your site. Can you help me please?

  Hi Routzi,

  Here is a LINK from hp.com for drivers and software for your Mac.

  Let me know if this solves your problem!

  Thank you

• HP OfficeJet 3830 all-in-one: problem of driver HP OfficeJet 3830

  Very recently, I installed the 3830 OfficeJet from HP printer all in one so that the documents can be printed from an iPad and also my desktop computer wireless.

  Installation seems fine - however there scanning questions and when I ran the doctor of printing & scanning HP the fix seemed to correct the problem.  I had to run the Scan Doctor again for the same problem - so there is of course another issue here.  Now, Dr. Printing & scanning says that the product could not be found even after a reboot, and the recommendation was to contact HP support.

  As I am much a technophobe I don't really know what is happening here and how to correct the situation.  Can someone please tell me - in the simplest language possible - how this problem can be treated.

  Thank you very much.

  Dottylass

  Hello

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-3830-all-in-one-printer-series/7172321/model/7172322#Z7_3054ICK0K8UDA0AQC11TA930C7

  2 uninstall the software from your computer
  3. install the FULL feature software "saved".

  Hope that helps!

• PSC 2410 photosmart all-in-one PROBLEM

  Hello, hoping someone can help me with this...

  I have a problem with my printer (psc 2410 all in one)

  During a simple formulation document printing, the printer ran out of paper and could not continue printing paper had been completed. I checked for paper jams - there is no. The print job has been cancelled and the printer and turned it over.

  From the market, it seems now stuck - the power button flashing continuously and the display only I get is the 'busy' hourglass icon... no other error messages or beeps. I can hear the printer through movements start, the flow of paper moving and then he seems hang somewhere and made a repetitive thud. This noise stops after about 1 minute and the display and flashing remain.

  I tried the hard reset several times, I even left it the day after. I noticed that the USB cable, jumped, but the printer also shows online on the computer... I tried to a maintenance operation, but he is not letting all through all print jobs. It's happened a few times when starting upwards, but apparently not however resolve no chance this week.

  Any help is greatly appreciated.

  Thank you

  Sam

  The operating system is Windows XP

  Hi samanthapson2,

  Have you thought about upgrading your printer for a newer model. Here is some information that will help you get into a new printer.

  HP trade-in program

  Please contact our technical support at the 800-474-6836. Customer support can also help you to get a new printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• HP 915 all-in-one: printer driver for Windows 10

  Dear Sir/Madam,

  My printer model is HP 915 all in One.After check the compatibility of the printer with Windows 10, I could not find the printer my name in your list. I intend to update my pc Windows 10, which is currently on Windows 8.1, I really bad move to Windows 10, but the only problem is the printer driver.

  Please suggest a solution as soon as possible.

  I thank you and look forward to hearing feedback.

  If all goes well

  Mocanu

  Hi Mocanu,

  Looks like you're right. It might not be a complete driver of features still to the all-in one HP Inkjet 915, but looks like there could be a BONE or integrated driver, which you can download. Go to installation and using the built-in Windows print driver for the steps.

  Hope that helps!

• Photosmart c6250 all-in-one: frustration driver location

  New hard drive replace crapped-out of road.  Try to find and download the printer driver [Photosmart c6250 all-in-one] successfully to zero on the HP support site... remarkable circular effort: point to drivers, identify the printer, poster printer photo on the screen does not work... Thank you very much!  This should not be comparable to eye surgery.  I started by trying to stay away from sites not HP, but it isn't work.

  Hello:

  Here is the link to the page support and driver for your printer.

  http://support.HP.com/us-en/product/HP-Photosmart-C6200-all-in-one-printer-series/3194493/model/3308552/drivers

  I can access the selection of the pilot very well.

  I discovered by another forum member who:

  1. for pages works properly, you must use Internet Explorer 10 or 11.

  It is a problem for some of us who climb to IE9 such as those who have Vista or a new install of W7.

  The workaround to get IE8 or IE9 to access the page of the pilot is to:

  1. activate the command bar at the top of the browser (click just to the right and check the option of command bar).

  2. then click on the small arrow to the right of the Tools menu.

  3. click on compatibility view settings

  4 uncheck use Microsoft compatibility lists.

  5. close and refresh the page.

  You will probably then a message you must run IE10 or IE11, but you can close this and get to drivers.

• 7310 all in one problem

  Windows XP Professional 7310 all in one

  I had a HDD out on my computer after repair and loss of amount of data I reinstalled everything for my 7310 and the printer works but none of the FAX or scanning software I used to have HP director on my desk that went too the only thing that appears in the programs is the HP product Assistant I downloaded the driver from HP.com and that did not work either problem even when loading It goes through the printing orders and then shortly after all just disappears without successful installation or anything

  Help

  Hi labmanjohn,

  Please follow the steps outlined in the document at the link below. Let me know if you still have any questions.

  http://support.HP.com/us-en/document/c00836418

• Epson all-in - One Printer Driver Runtime error

  I'm having trouble with the installation of the printer drivers for an all-in-one Epson Stylus 7520 which is shared on a network.  When you try to install the software, I get this error:

  Runtime error!

  Program:

  C:\Windows\system32\spool\DRIVERS\x64\3\E_YATIHDA. EXE

  R6034

  An application has made an attempt to load the C runtime incorrectly library.

  For more information, contact the application support team.

  This error will continue regularly until I have turn off the print spooler in services tab.  If I use the print command in any program, this program will immediately freeze and require a force close by the Task Manager.  To completely uninstall the software print spooler must remain disabled, else it will give an error that it is in use.  After uninstalling using Add/Remove programs so that I have to manually go in system32\spool\DRIVERS\ files remove traces remains of the software (including the offending .exe program).

  When I say the machine to locate the drivers alone, it will bring up a window with the "WSD printing device" and an icon indicating that it is busy, which will eventually turn into a red X indicating that he failed to find a driver.

  Default Epson software package includes bells and whistles as a utility that monitors ink levels and checks the firmware updates, which inevitably cause this error.

  But Epson also allows you to download driver separately this package.  When I install just the driver, no error message appears, the computer communicates with the printer and use the functions scanner and fax without error (it displays its IP address, MAC address and even to send print orders), but it does not actually print a file.  The work appears in the status display of the printer on the computer, but eventually the delay and error.

  The machine that gives me the error is an Acer with Windows 7 Pro installed by the manufacturer.  It's a whole new machine.

  These same drivers work without error on a HP Windows 7 Home machine installed by the manufacturer, as well as several XP machines we are trying to eliminate out of use.

  Both machines also have a Konica Minolta printer installed that they will print to any question.

  After researching the issue, Epson insists that there is nothing wrong with their pilots, but I will communicate their support today.  If they come up with a solution I will try to remember to post it for the benefit of others.

  I have tried many suggestions available online without any change in the results:

  Tried uninstalling and reinstalling several times since the epson CD.

  Run windows update.
  Tried uninstalling and reinstalling several times with the latest drivers available on the epson site.

  Checked that I use the 64-bit and 32-bit drivers.

  Run "scannow" which gave no abnormal results.

  Delete all the files in the AppData/Temp folder

  Reassigned to the location of the temp folder.

  Tried to install with the Windows Firewall disabled.

  Removed from the McAffee trial provided with the machine entirely.

  I have not tried to uninstall and reinstall the software C ++ yet (as suggested in similar topics) that other users have pointed out, it does not solve the problem.

  In my case, this was due to a conflict with Acer Proshield. I removed Acer Proshield, then the driver is installed correctly.

• C410a HP all-in-One Printer Driver Patch for AMD chips doesn't work on HP ProBook 6565 b

  Oh, the irony.  I can't install the driver for my all-in-one HP C410a printer to my laptop HP ProBook 6565 b.  The laptop is running Windows 7 64 bit and a smart AMD-A4-3310MX.

  I downloaded the patch designed to fix the problem with the other recognizes AMD chips in the HP troubleshooting page.

  Hello

  Try these steps and check whether that can help you:

  Follow the steps until the license agreement, click the 2nd link on this screen (using the Internet).

  Both mark as no, thank you, and then click OK.

  Agree to the terms, proceed to the installation and verification for the difference.

  Shlomi

• How to get the Dell 944 Photo all-in-one printer driver to work

  I just bought the Inspiron 580 and am trying to use my existing printer (Dell Photo All in One 944) how to download correct driver for the printer to work with the new computer?

  S Pipkens,

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (utility cleaning printer) untip it prompts you to restart your computer.

  Restart your computer. Make sure that the printer has been deleted. Driver Manual printer removal

  Download and install the proper drivers from...

  Reference Dell 944 all-in-One Printer owners thread (W7) (Patch is also located here)

  Firewalls and anti-virus programs will block communications.

  Rick

• All-in-one software driver hp Pavilion G6-2324

  Thank you for supporting Hp Pavilion G6-2324SL/D4M98EA #ABZ for all-in-one driver

  Hello

  Please find the link given below might help you to select the operating system and download the driver.

  Link