download PC speed limit

Similar Questions

• Is there a speed limit on the ethernet cards?

  Hey guys do you have an idea who is at - it a speed limit on the Ethernet cards, because I can use the P2P so fast that, after awhile, my internet connection is stopped as, I can't do anything unless I unplug, wait a while and connect again. Don't you think that it is a hardware or software problem?
  By the way: my Ethernet card is Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
  I need your help. Thank you.

  Hello

  In my opinion, if you have some problems with the internet connection the reason should not be any kind of speed limit but also other different reasons.

  In your ad, you're not mentioned that you do exactly. You write e-mails or do the download of two different movies and many mp3 files?

  As far as I know if you do the full download the connection can be slowed or even stopped by FAI. Is your cable may be defective. The LAN cable has 8 lines and if one line is faulty speed will fall automatically.

  I also recommend you use a malware scanner and check the unit.

  Good bye

• Satellite Pro A300: XP - Internet HSDPA speed limit - only 1 MB

  Hello

  I am user of 2 different models of Toshiba Satellite Pro A300-1NT.
  I use XP Professional extracted from the original XP Recovery disk.

  When it is connected to internet provider GSM using ExpresCard HSDPA modem or HSDPA USB modem I get 1 MB speed limit control on speedtest websites (ie: speedtest.pl) and internet usage is relatively slow when comparing other computers.

  When Windows Vista was installed on the model of the A300 speed was greater than 5 MB.

  I already checked, I'm in the range of UMTS and speed on other computers (Toshiba Tecra with WinXP Pro, Toshiba A100) and M70 with Win XP Home with the same modem (Huawei) has no such speed limit

  What might be the case and the solution?

  Hello

  Have you checked the WLan performance using different WiFi standards?
  You can change the Wlan standards in Device Manager-> card Wlan-> properties-> Advanced tab.

  Check the settings there.
  I recommend using a WiFi standard 802. 11 G for example instead of B/G

  In addition, you should check if you can update the WLan driver and if the BIOS is updated.

• SPEED LIMIT OF DOUBLE CLICK KEY

  I have a HP Probook4540s runing Windows 7 Professional. Last night, he started a speed limit on double substitution in a screen or program any key. Whenever I have a double character like "ee" or "oo" or same double line spacing or BACKSPACE or delete, once I hit key desired, I have to wait a second or 2 before I hit him again so he could register.  I don't know that there is a setting somewhere where I need to check or uncheck a box, but I have no idea where he might be. I've looked everywhere I can think of. It is not specific to a certain program, it happens in all programs, all screens.

  Hello

  Check the following points.

  Open windows control panel, open ease of access Center and click on the link "make the keyboard easier to use.  If there is a check mark in the box beside "Turn Sticky Keys" or "Turn on filter keys", delete them and then click on apply to save the changes to see if that solves the problem.

  Kind regards

  DP - K

• WRT160NL Exchange download and speeds.

  Hello world!

  WRT160NL Exchange download and speeds.

  

  Before the router, everything's fine, then it is wireless or Ethernet port is over situation.

  No difference what firmware it is (1.0.02, 1.0.03, DD - WRT...)

  There are many things to take into account for the same problem, I found this link then. You can check this, http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22110

  Also, have you tried to reset and reconfigure the router? If this is not the case, try to do first.

• Speed limit of network in the workstation?

  Do you know if there is no speed limit of network between the virtual machines running on the same workstation to Vmware? I think remember something about say 1 Gbps as maximum, but if virtual machines can provide throughput more - it will go by?

  Do you use bridged or one of the networks vmnet1 hostonly or 8

  hostonly networks are limited only by the host CPU resources

  But anyway - Gbit network is much faster than anything that can manage virtual disks

• vSphere virtual integrated cpu speed limit?

  Hello

  I have a group of four vSphere 4.0u1 guests with many free resources (4-core nehalem 2.27 GHz + 32 GB RAM for each host). There is a virtual machine (linux Debian 5, 64-bit) with one vCPU. Though this VM would have more speed CPU (trigger alerts on the CPU usage), it becomes ever more than 2 GHz. In the resource pool, I tried to add several actions (up to 8000), but without success

  Is there a speed limit of vCPU in vSphere so that the computer only vay to increace pover of VM is to add an another vCPU? Or am I missing something basic, where can I put the maximum vCPU for all my virtual machines? I think vCPU shloud be scalable in DURATION up to 4x2.27GHz less what console service needs, while the other usingVMs of lesscpu must be migrated to other hosts by the Drs Is is it true or not?

  Thanks in advance,

  David

  Hello

  You'll never be more than the power of one heart for each vCpu. At any time, each vCpu is attached to a physical core. The ESX Planner do not aggregate the power of multiple processors to "emulate" a super processor.

  In your configuration, will have no more than 2.27 GHz each vCpu.

  Franck

• Download WiFi speed is poor

  I use a router broadband SMC 50 n. My phone gives me a download speed of 40 more, while the touchpad HP 32 GB cannot cross 4.83. Installed preware, pad running 3.04 last. Put the Touchpad with all settjngs preware updates. I wonder why its so slow operation.

  YES BOTH OF YOUR QUESTIONS. ROUTER HAS RECENTLY BEEN INSTALLED BY MY CABLE PROVIDER. ITS A SMCD3GN. Very strange, I must say. Touchpad was sent to HP for repair

  the case was cracked at the area of two speakers. When she came back to me, I had

  Re - install preware etc. I believe that unity is not the same as the one I sent, but refurbished. What made me suspicious, it is that I got to reregister the unit. I guess I'll have to contact HP.

  Thanks for your help... much appreciated

• HP laptop - 15-af030ca: download WiFi speed reduced by 50% +.

  Way too often triggers my wifi and I need to use the troubleshooter of the restart, when he returns my speed are matched by 50 to 90 percent. It is NOT a problem with my wifi as speeds on my desk stay stable.  My download speed remains the same. Really tired of a new computer failrly often have this problem.

  Thanks for getting back to me. Don't worry about removing the driver, just go ahead and start the installation program. You can also use the Recovery Manager if need be: P PCs - using the Recovery Manager to restore the software and drivers (Windows 8).

  If the problem persists, please include answers to the following questions in your response:

  1. How are determinants 50-90% of the speed of falling?
  2. This is based on a download speed?
  3. Where exactly you find this out?
  4. Are how close you to the router?
  5. You run 2.4 GHz of the laptop?
  6. You compare it to a speed on another computer? The computer is also wireless?
  7. You have a "inhalers connection" located on your laptop? See set up a connection as counter

  Thanks, I look forward to hearing back on your part.

• Download slow speed using router TimeCapsule.

  Hello, I am from Romania.

  I use a gigabit internet provider connection. I'm also employee support helps this provider.

  For about 2 weeks, I have a TC 1 to 3rd gen (2009 model) which is gigabit wan and lan.

  I used prior to a D - link DIR 626 L router with gigabit wan and lan.

  With the D-Link router, the actual download speed was 89-94 MB/s with the TC, but not more than 21 mb/s.

  I used same cables checked their. I am connected directly to Gpon Gigabit Ontario who works perfect.

  I use an iMac mid-2011 with 16 GB of ram, i5 image 2.7 ghz and a SSD Samsung 840 Pro.

  If I connect my cable internet provider directly in the Federal Polytechnic of gigabit iMac I get arround 92 - 96 MB/s.

  If use the TC as a router... using cables between transport CANADA and iMac... not more than 21 mb/s. The patchcord between the TC and the iMac is cat6 cable.

  But for sure isn't the cable... do not forget that the DLINK router has no problem.

  What is the problem with the TC?

  The strange connection between the Gpon and my TC is granted to be gigabit and it's for real.

  Me and my work guys we have tested with another 2 gigabit router and computers of Microsoft cpu/minimum 3 another gigabit/ssd/minimum i5 8 GB of ram.

  ALL of them were at least 80 MB/s download.

  Thx for your help,

  George Stoica help support @ RCS - RDS S.A. Romania.

  There are a few tests that you can run.

  1. check the LAN speed works well. Easy way to do this is to copy a file from the computer to the hard drive on TC.

  One big file of about 1 GB or more. What speed do you have? You should be able to manage 20-30MByte/s

  Make sure that the wireless is turned off on the Mac for this test. IPv6 on the Mac should be set on the local link only.

  2. If the test still gives you very low speed, you did the Gen3 ethernet... It's called problem.

  Test again in wireless... Ethernet is unplugged. Force connection to 5 GHz and make sure the wireless speed is max... IE 450Mbps.

  Re-do the test copy of file and it should still get up to 20MBytes/sec

  3. If all of the above tests give you the speed you would expect local network, then the problem is the WAN port.

  You do not specify the Mac operating system. but you can do it from a PC using windows version 5.6.1 airport utility

  Set the WAN port for lower speed. Try 100 Mbps half duplex.

  

  You can make this change with a utility of v5. If your Mac is the Lion or Mountain Lion, you can easily install 5.6.1 but you must use a method IE decompress the installer.

  http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-OS-x-v10-8-mountain-Li on /.

  If you have the Mavericks El CAPO, you can use this method.

  http://coreyjmahler.com/2014/10/16/airport-utility-5-6-1-on-OS-x-10-10-Yosemite/

  If that does not speed up data flow WAN to LAN, then the TC is really defective.

  Open the TC and tell me if it uses a power brand Flextronics or Delta... the Flextronics are much less reliable than the Delta. A power supply going bad will cause problems accelerate.

  There is also a rare fault... I fixed just a TC there. Where the capacitors on the 1.8 v power inside converter lose capacity.

  See the following page.

  s/apple-time-capsule-repair/new-issue-wi https://sites.Google.com/site/lapastenague/a-deconstruction-of-routers-and-modem...

  The solution is very simple if you have DIY skills... weld a Dec...

  Give me your test results.

  A Gen3 TC should be around 300-400Mbps Wan on the flow of the Lan without too much problem.

• Internet connection with a wired network card Gigabit speed limit

  Can you reach 150 speed Mbps Internet connection on a computer running Win XP SP3 and IE8 with the help of the Gigabit wired network adapter?
  What kind of drivers are required in such a case?
  Currently, I have 150 Mbps of connection, and what I get according to the speed tests is of the order of 60 Mbps with pings of 30 to 60 ms.
  My troubled wired adapter is TP-LINK Model: TG-3269-based Realtek RTL-8169SC chipset and its driver: rtnicxp.sys, v.5.649.0615.2006 (WinDDK) provided by Realtek

  The fact that your Ethernet card is theoretically capable of 1000 Mbps does not mean that everything in the path between your computer and the fiber cable (which is what your ISP based his spec 'speed' on) is capable of the same way.

  For example:

  • What type of cable you are using between the computer and the modem/router... and how long is it?  You did the cable yourself or did you buy it with the connectors already attached?  You must at least Cat 5 cable and attach the connectors yourself is not recommended, unless you have a good amount of experience doing.
  • What brand/model/version of your modem/router?  It has the latest firmware installed?

  You have a second computer that also has a Gigabit network?  If so, check the transfer speed of A computer through the router to computer B (i.e. What is the transfer speed of your LAN, completely apart from the speed of transfer between you and your ISP).  Use a stopwatch and a large file or use a utility such as LAN Speed Test.

  What TG-3269 version do you have?  The current one is V3.

  Assuming you have v.3, you appear not to have the latest version of the driver (though I doubt that's the problem).  The package labeled TG-3269_XP_beta a 5.719.0325.2009 XP driver version.  http://www.TP-link.com/en/support/download/?model=TG-3269&version=v3#tbl_a
  Finally, you may want to think about your connection setting, what is most important for XP and later versions of Windows: http://www.dslreports.com/tweaks and http://www.psc.edu/index.php/networking/641-tcp-tune

• Download WRT110 speed drops if I use ESET NOD32 Antivirus

  My PC: Pentium 4, Windows XP SP3 home edition.

  D - Link dsl modem, router Linksys WRT110

  DSL 15 Mbpsdownload speed.

  WIFI disabled.

  A PC connected to the router.

  With NOD32 Antivirus installed on my PC and without the router:

  Download speed is 15 megabits/sec.

  With the router and NOD32 installed on my PC:

  Download speed drops to 2 megabits/sec.

  If I uninstall NOD32, everything is OK.

  the download speed is 15 megabits/s new

  (with the router).

  What should I do?

  Download speed of connection, NOD32 Antivirus, internet slow is OK once again - SOLVED!

  Internet (ISP) - D-Link DSR-360R ADSL2 + modem-

  Wired ethernet - Linksys WRT110 router-

  -Network card integrated Realtek - PC Pentium 4.

  - Windows XP Home SP3 - NOD32 Antivirus - Firefox browser

  15 Mbps speed I can get only 1 Mbps of download

  I found a solution to this problem:

  I have this experience at the start of Windows XP is:

  My NOD32 starts slow, it takes about 1 min 35 sec, until everything is frozen on the screen:
  http://www.abload.de/IMG/boot_photom4f6.jpg

  And NOD32 also does:

  This is how he should like my system tray after installation and use of NOD32
  If I connect directly to the internet.
  But this is a rare opportunity:
  http://www.abload.de/IMG/alloftheiconsdisplayeddo2f.jpg

  Namely, my network card icon disappears quite often if I have NOD32 installed on my PC.
  It works, but somehow it does not appear on the system tray:
  http://www.abload.de/IMG/network_icon_doesnt_ap3scz.jpg

  And it also happens that the NOD32 icon does not appear on the system tray.
  but it works in the background and catches the virus to be a.
  http://www.abload.de/IMG/nod32_and_network_iconxraq.jpg

  So, this can be a problem: NOD32 and my network card are disturbing each other?

  I did a search on Google: slow internet nod32

  found this:
  http://www.wilderssecurity.com/showthread.php?t=140298&page=3

  #58 gave me an idea

  Really my network integrated some card problem?

  (Realtek RTL8139/810 X Family Fast Ethernet NIC)

  This is why I made the following points:

  1. I have installed NOD32 and PC restarted.

  2. uninstalled the driver for my network card,

  3 , I took the original CD, I had to my motherboard

  and I reinstalled my CD drive integrated network card driver and restarted the PC

  (something tcpip.sys has been installed during the process - as my firewall displayed)

  And that's. My download speed is like never before. It works perfectly.

  Measures of the website speedtest.net always silly results if NOD32 is installed.

  but who cares. The download speed is OK: 10-15 Mbps

  Even if I connect to the internet via the router.

  And what is more, it seems that my PC is a little faster than before.

  After you have reinstalled the network of my network adapter driver, I measured this datas:
  
  NOD32, direct adsl connection:
  http://www.abload.de/IMG/xpsp3_direct_adsl_nod3m19c.jpg - stupid speedtest
  BUT
  http://www.abload.de/IMG/xpsp3_direct_adsl_nod3134f.jpg - perfect
  http://www.abload.de/IMG/xpsp3_direct_adsl_nod3d31q.jpg - perfect

  We can say, it's a good download speed, BUT speedtest results are false.

  
  NOD32, router connection:
  http://www.abload.de/IMG/xpsp3_router_nod32_firx4bx.jpg - stupid speedtest
  BUT
  http://www.abload.de/IMG/xpsp3_router_nod32__dif307.jpg - perfect
  http://www.abload.de/IMG/xpsp3_router_nod32_jdo33l8.jpg - perfect

  We can say, it's a good download speed, BUT speedtest results are false.

  When NOD32 is uninstalled and antivirus is installed:

  No Antivirus, direct adsl connection:
  http://www.abload.de/IMG/xpsp3_direct_adsl_nod3q2ls.jpg

  No Antivirus, router connection:
  http://www.abload.de/IMG/xpsp3_router_nod32_unic4fq.jpg

  My download speed is OK now,

  but the slow start has not changed.

  .

• RV082 WAN speed limit

  Hi all

  I worked for years with RV042 and RV082 routers will detect any problem.

  Now, I have implemented a RV082 connected to a router (cisco) of my ISP (fiber) which provides 30 MB. I cannot download more than 10 MB/s. I can almost Download 30 MB/s.

  If I connect my Airport Express directly to the Cisco router I can reach close to 30 MB/s download and download without problems.

  I played with MTU (auto, 1500, 1492,...) without success. I used Load balancing, backup or just a Wan connection cable but no result.

  Can someone help me?

  Thank you very much!

  Alberto

  OOOOO, I remembered where I saw this kind of problem before!

  Check the setting of the ethernet in the WAN port and make sure that it is set manually to match the speed of the port on cisco routers.  For example, if Cisco is 100 MB half-duplex, be sure that the rv082 is set to the same.  I saw the same thing on a router, I had who had only 1 mb down and 11 MB upwards.  The duplex setting was wrong.

  I hope that this solves the problem!

  First car of Huntsville and bike e-magazine: www.huntsvillecarscene.com

• Can not know why my VM download high speed but horrible upload speed... help?

  HI -.

  I hooked 5.1 on a gigabit network and just do a few network tests. I tested a Win 2 k 12 virtual machine using LAN Speed Test and got up to 475 Mbps down but only 38Mbps verifying against a NAS part I. By way of comparison, I checked a physical machine against the NAS share and saw 350-400 on both sides. I'm naïve about why the download speed would be so slow when downloading indicates clearly that I have gigabit speeds. Has anyone ever encountered this before?

  Thanks in advance for any help...

  I solved my problem. I ordered and installed an Intel EXPI9301CTBLK PCIe NIC, and suddenly my network throughput is completely within the limits on my VMs. thanks you all for the help...

• VM CPU speed limit - why?

  In our environment, I have been asked to limit the MHz available to virtual machines with multiple vCPUs.  I got it because it will prevent a VM with bad software or process broke to consume multiple cores on the host.

  My thought is that this is not serious if we limit the speed.  If a virtual machine will enter 2000 MHz or 1000 MHz, anyway it has a heart on the host.  If my host has power 3000 MHz and my VM cannot take 1000 MHz of this power (because it is his limit), it still has the heart.  I don't think that the 2000 MHz extra on this kernel is available to other virtual machines until the virtual machine with the wrong process restores the kernel.

  With this reasoning, I should remove the limits and let the VMs system run.  A bad process that will break the VM will impact the host even if the MHz is limited or not.

  Am I right or not?  Someone can explain better, or is there a documentation I can read and use as justification?

  1000 MHz or 2000 MHz, anyway that there the heart on the host.

  VM do not have access to material that's a software emulated time slice.

  You can set limits of pools, give you a limit to the pool, the virtual machine shares the pool if one of these virtual machines exceeds this limit of pool, this will not affect ANY site of vm this pool.

  By the way... even if an application is crazy... This is whence the priorities, you can make this virtual machine a lower priority such as the other virtual machines may take precedence over the CPU.