Vista SP3?

Similar Questions

• How can I get windows vista sp3 on windows vista sp2?

  How can I get windows vista sp3 on windows vista sp2? I need this to start school as soon as possible. I have no idea what I'm doing

  SP2 is the latest service pack for Windows Vista.

• Windows vista sp3

  Hello
  At the exit of windows vista pack 3 service postponed to July 2011? Thank you!
  Shen Qin

  "Those who say cannot know, and those who can't."

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista has SP3 yet?

  Hello

  In fact, I use Win Vista SP2, so I need to know if there is any version of Windows Vista SP3... because when I check my updates to the computer there is still no update for Windows Vista SP3.
  Thanks ago
  Luc-link

  . No..

• Bluetooth lost after updating Vista SP1 on Satellite P200

  Hello

  I'm desperate...

  I use a mini Logitech dinovo keyboard like a keyboard for my P200. It connects via Bluetooth. My Bluetooth connection is a Bluetooth USB device provided with the keyboard. Until yesterday, everything worked fine, but then I installed the Vista SP1 and I lost the bluetooth connection. The computer does not recognize the device Bluetooth USB and bluetooth Control Panel contral disappeared.

  I have one installed SP1, it does not solve
  I have restore before SP1, it does not solve
  Nations United installed the software of Logitech and re install, it doesn't work.

  I downloaded and installed the driver from the BT monitor and it does not change anaything. I installed the drivers of BT stack, but it doesn't

  Please can someone help me?

  Much appreciated,

  WR

  In such situations, there are two sides. It will be interesting to know if there is a problem if you try to connect another BT device to your laptop. Try it with your mobile phone if BT is available.
  I can't imagine the BT device doesn't properly work.

  Have you tried to contact Logitech technical support? Maybe they have the solution to this.

  All you have done is OK, but I can imagine that that SP1 of Vista SP3 in Windows XP Home edition can perform or certain disorders.

  Please check other BT device functionality and display the results.

• Preparation tool update system for Vista

  Vista Home premium 32-bit with Vista SP3

  Norton Internet Security 2010

  back in June 2010, I received an update to run the preparation tool update for Vista system. I ran that tool, but may not have let finish because it took almost an hour with no end... not sure if the tool ran and completed its function. Now, I've read that the process of this tool work can take well over an hour

  Anyway, nothing thought up until this last week

  I installed Norton Internet Security 2010 last week. I noticed that Norton detected a kind of error with ccSvcHst.exe function program and the error code was

  0 x 80070490

  which seems to indiacte something wrong with my Vista operating system

  I went and made a check of updates from microsoft, but the tool is not yet available

  Norton forums suggested that the tool must be run again. I noticed there is a more recent version of the tool (seven 29, 2010) than what I ran in June 2010

  ALLOW ME TO NOTE THAT I DON'T HAVE ANY PROBLEM WITH RETRIEVE AND PROCESS THE MICROSOFT UPDATES > UPDATES MICROSOFT INSTALL WITHOUT PROBLEMS

  1 should I I manually run the system update readiness tool again? (I now understand that I need to leave him alone and let him finish) I know that the current tool was revised in September 2010.

  2. can I cause system problems if I run the tool again?

  3. what version of the tool manually should I download and run x 86 vista or vista x 64? MYSYSTEM is vista Home premium 32-bit and a dual core processor

  The CheckSUR.log file is the only thing that we really need to look at in this case,

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22441
  Version 9.0 package
  2010-10-19 18:52

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI shows missing 0 x 00000002 x86_microsoft.windows.common - controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436.manifest x86_microsoft.windows.common - controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436
  (f) CSI shows missing 0 x 00000002 x86_microsoft.windows.common - controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest x86_microsoft.windows.common - controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3
  (f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20.manifest x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20
  (f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639.manifest x86_microsoft-windows-smbserver - v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639

  Summary:
  Seconds executed: 8959
  Found 4 errors
  CSI shows lack Total count: 2
  County CSI shows zero total length: 2

  Unavailable repair files:
  winsxs\manifests\x86_microsoft.Windows.common-controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436.manifest
  winsxs\manifests\x86_microsoft.Windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest
  winsxs\manifests\x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20.manifest
  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639.manifest

  I have an example of how to solve this problem here , but you will need to get the missing files above instead of the ones I have identified for the other user.
  -Mike Burr

• When there is a Windows Vista Service Pack 3?

  Some Web sites said that there is a Windows Vista Service Pack 3. Is there a Windows Vista SP3 or not?

  Tuesday, December 25, 2012 22:12:10 + 0000, SonPhan wrote:

  Some Web sites said that there is a Windows Vista Service Pack 3. Is there a Windows Vista SP3 or not?

  See
  http://Windows.Microsoft.com/en-us/Windows/service-packs-Download#sptabs=Vista

  who says "the latest service pack for Windows Vista Service Pack
  2 (SP2). "

  Ken Blake, Microsoft MVP

• Hotfix for KB 2470478 Vista moved it - error 0xc8000247

  I have a HP Pavilion dv6700 laptop running Windows Vista Home Premium SP2. I got my drive hard original factory replaced with a Western Digital Scorpio Black 750 GB hard drive, WD7500BPKT-22PK4T0. The store of the computer creates an image of my old drive using Acronis True Image Home. Everything seemed to work fine until I noticed that Windows Update did not work and said that the service was not working, while he was actually. The error in the WindowsUpdate log was 0xc8000247.

  I discovered a thread from 2011 indicating this problem, others that I lived because of my new HDD is an advanced Format drive that uses a 4 K sector size rather than size of 512 K older sector. The Microsoft Knowledge Base has an article on issues that I am experiencing. specifically, the 2470478 KB. I tried to install the fix that is provided in this article, but it won't work. It throws the same error, 0xc8000247. Similarly, I can not install the system update readiness tool.

  I read that Microsoft could be published a new version of this fix that works in 2011 (!) or including a fix in Vista SP3. However, none of them happened. Is there a way to fix this?

  Thank you!

  Hello

  Going to answer my own question here, because I finally found the answer in this thread of the Acronis forum:
  http://Forum.Acronis.com/Forum/25558
  I followed the steps posted by tubebend and ncsdiver towards the end of the thread.
  Bottom line, to make Vista works on the new hard drive for Advanced formatting, I had to restart the old drive hard in, install the Microsoft KB 2553708 hotfix on the old disk and then re - clone the drive on my new advanced Format drive.
  Then, because my computer has an Intel chipset, I also had to install a driver Intel Rapid Storage Technology 9.6 versioned (or most recent) on the new drive to support Advanced Format drives.
  After these steps, we worked through Windows Update.
  Research still wasn't working, so the last step was to boot from the Vista installation disc, choose repair, open a command prompt and issue the command /FixMbr. Bootrec After that, all the services and applications that depend on ESENT worked again.
  Here's a great article for anyone installing Windows Vista or Windows 7 disk Advanced Format that explains the problem in simple terms and provides a bunch of good links:
  http://mavmesa.com/what-you-need-to-know-about-Windows-and-advanced-format-hard-drives/
  One of the links is to the next page of Microsoft which has a table showing what it takes to run correctly on a hard drive of the Advanced Format various Microsoft OSes:
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/hh848035 (v = vs. 85) .aspx
  Hope this post makes this information more visible and help others who have cloned without wanting their systems Windows Vista or Windows 7 on an older drive on an advanced Format drive. The problems that Windows running on Advanced Format drives don't seem to be common knowledge.

• update my windows vista to windows 7, I need new product key for windows7?

  Additional question:

  I bought my laptop included windows vista Home premium 32 bit SP2 with System Recovery Manager
  I read that there is an upgrade from windows vista to 7 in basic information on my computer in the following manner:
  Windows vista edition Home premium
  Copyright 2007 Microsoft corporation. all rights reserved
  Service Pack 2
  Upgrade to Windows Vista
  what my question is, if I update my windows vista to windows 7, I need new product key for windows7? ,
  or can I use the same product key of windows vista in windows 7 after upgrading?
  and can I upgrade windows vista service pack 2 with service pack 3?

  Hello

  You will need to purchase a license/disk/upgrade Windows 7 product key.

  Microsoft sells more Windows 7 and you would have to buy from Amazon, etc.

  There was a free upgrade offer, but it expired a long time ago:

  "The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option. »

  __________________________________________________

  There is no Vista SP3; SP2 has the latest Service Pack for Vista and will be the last.

  __________________________________________________

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• Fix for KB 2470478 Vista install-Setup has encountered an error: 0xc8000222

  original title: hotfix for KB 2470478 Vista will not install

  Hello

  I have a HP Pavilion Elite Notebook DV7t-1000 running Vista Home Premium SP2 with all updates installed. To replace my original factory now too small hard drive, I installed a Western Digital Scorpio Black 750 GB hard drive (model number WD7500BPKT). With the help of Acronis True Image Home 2011, I restored the original scores of my system disk (disk Local C: and D: HP_RECOVERY) factory on the new drive.

  The transfer of my system partition and recovery to the new drive more big seems to succeed. The system booted normally and my Office and Windows installations reported to be installed correctly. But when I checked Windows Update, the system reported that the service was not available and offered to restart. I restarted but still, the service reported that it was not available.

  I predicted that this behavior could happen and that he had prepared for her. In my research for the upgrade of my hard drive, I had learned that my new HDD is an 'Advanced Format drive"that uses a sector size of 4K rather than the traditional 512 K sector size. The Microsoft Knowledge Base contains several articles on this issue and the specific article for Windows Vista is 2470478 KB. Following the tips in this article, I waited until what the symptoms of a problem appeared until I tried to install the patch. Disabling the Windows Update service was one of the symptoms that I was looking for.

  The file from the hotfix associated with this Knowledge Base article is a .zip file only when it is extracted product a file called 'Windows6 '. 0-KB2470478-x 86.msu. However, when I try to run this file, I get the following error report: "Setup has encountered an error: 0xc8000222. I tried to turn off my antivirus Norton and restart the system, but all attempts to install this fix have the same error.

  Outside waiting for Microsoft to formalize this fix as an update (part of Vista SP3?) someone has suggestions to make the installation of this hotfix to succeed? While I did not check for other errors related to this problem, my situation of upgrading to the new drive convinced me that my problem is the one indicated in the Knowledge Base article. My original Esent.dll files are significantly older than those reported in the patches section. When I replaced the new drive with my original Windows Update drive normally.

  Outside of reboot or turn off the antivirus protection, someone has suggestions to work around the error to install 0xc8000222 in order to safely install the patch file (. Windows6 0-KB2470478-x 86.msu) for the Microsoft article 2470478 Knowledge Base?

  Thank you for your response.

  I followed the advice in this thread by adjusting to make it use the System Update Readiness Tool for Windows Vista (KB947821), rather than tool for Windows 7. When I tried to run the tool I met the same problem when I tried to install the hotfix: error installing 0xc8000222.

  Because I had the same problem to install the tool on to Windows Vista after I had moved the image of my old drive to the new drive, I saw two choices. See 1) file a journal report as suggested in the thread of Technet or 2) if I could install the hotfix on my original hard drive and then rebuild the disk image for installation on the new hard drive for Advanced formatting.

  After you set a system restore on my source drive point, I chose to install the patch and rebuild the disk image. For security reasons, I installed upgrading preparation system tool for Windows Vista (KB947821) beforehand. When I restored the image of the disk on my new advanced Format drive software seems behaves normally. Windows Update works now and Windows and Microsoft Office indicate that they are enabled. This solved my problem. I also notice a nice increase startup speed on my new drive system.

  The instructions on the fix should not use unless the problem appeared, that I interpreted to mean do not install it on the new Advanced Format HDD unless I saw a problem. However, once I saw the problem, I couldn't install this hotfix or any other Windows Update. Indeed the files included in the fix has featured several hardware drivers rather than standard system software.

  A problem with my approach, is that I had the luxury to regenerate my disk image after the installation of the hotfix. If one is obliged to restore a backup image to due to hardware failure, I don't believe that, after copying the disk image on one of these new Advanced Format drives, we could install the hotfix or the update of all other windows. The fix needs to be improved to the point that it is a standard part of Vista. I'm pretty sure that Microsoft is already planning to do.

  My system works, though if you think it would help, I could always point out my logs in a location of Skydrive for people of Technet.

• Windows update is not download and install Service Pack 1, 2 3

  Did a fresh install of Vista 32 bit Home Premium on Acer Extensa 4420. After repeatedly run Win Update and installation of more than 60 update updates said that I was aware. HOWEVER, SP - 1 was not detected as missing but was necessary for the other software work. I found SP-1 and installed manually. Now Win Update refuses to download Service Pack 2, so of course it also doesn't download Service Pack 3.

  Why is Win defective Update and do not install it no matter what Service Packs?

  Do I have to manually install SP2 & SP-3 or should I wait until I discovered problems or get a virus or another bad thing because Win Update did not bother to run properly?

  Did a fresh install of Vista 32 bit Home Premium on Acer Extensa 4420. After repeatedly run Win Update and installation of more than 60 update updates said that I was aware. HOWEVER, SP - 1 was not detected as missing but was necessary for the other software work. I found SP-1 and installed manually. Now Win Update refuses to download Service Pack 2, so of course it also doesn't download Service Pack 3.

  Why is Win defective Update and do not install it no matter what Service Packs?

  Do I have to manually install SP2 & SP-3 or should I wait until I discovered problems or get a virus or another bad thing because Win Update did not bother to run properly?

  ===========================================
  I think it may be better if you download full
  files on your desktop and then install from there. And... BTW...
  There is no Vista SP3.

  Once you have the file on your desktop, it can be a useful
  try to unplug the net and turn off your anti-virus
  before installing.

  The following links may provide something useful... the links are
  intended for 32-bit and 64-bit versions.

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1
  (expand the section: "manually install SP1 using the ')
  Microsoft Download Center")

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-GB/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2
  (expand the section: "manually install SP2 using the ')
  Microsoft Download Center")

• After replacing my HARD drive with a 1 software to, serverals collapsed at work, such as messenger, Windows Update, network (printers and computers cannot be seen).

  I use Windows Vista SP3, Intel core Duo, 1 TB HDD processor. I copied the two partation, I had (from old HARD drive). After that my msn, the network (only the local network, internet is ok), Update Windows... stoped working. I got a messenge for windows update in saying that the service is not running, but according to services.msc it still running. When I try to sign in to Messenger, it is said that the service is temporarily unavailable.

  How ould I do to fix?

  Kind regards

  Carlos sales Junior

  Hello

   
  How the printer is connected to the computer-wired or wireless?
  
  Method 1:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  Method 2:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• ' Check for Updates ' mobile opens instead of program

  OS: Vista SP3

  Error message: I noticed recently on my Vista system, when I click
  on the check for option updates to CCleaner or IObit Advanced System Care,.
  website update for products used for the open, but now the notebook opens instead.

  By doing some research online, I found that there is a problem
  reported repeatedly that when we click on an EXE file, Notepad is
  called.  This problem is apparently due to a wrong value
  (Notepad.exe) in a registry key.  Sometimes it is caused by a virus, I have
  read.  I scrupulously updated the operating system and of the MSE.  There is a fix from Microsoft
  for the problem of the EXE/notebook, which I tried, but it does not solve my
  problem.

  My problem is not that the EXE files called Notepad, but only these check for
  Update the links.  I'm guessing that verification of the links was updated on these
  programs (and perhaps others) are using some other registry key that is wrong
  set.

  You have an idea what check these registry key updates are links
  the call, or maybe you have another idea of how to solve this problem?

  Hello

  The issue seems to be with the corrupted file system, I suggest you check out the link below and run the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

• TCP/IPv4 obtain DNS automatically

  Hi all

  I have my router configured to use dns to opendns servers, and everything works fine except for my desktop under Vista SP3 PC.

  I have my router set up because of the IP based on MAC addresses, so I have the TCP/IPv4 set to obtain an IP and DNS address automatically.

  My problem is the PC of Office Watch reset itself and registering an address in the DNS server box. How do I delete these addresses and force it to Auto adjust.

  I don't really want to put in the openDNS servers, in case I decide to go back to my ISP servers. I prefer to keep auto and make the changes on the router.

  It becomes very frustrating to have to keep resetting.

  Go to start / Control Panel / Internet Options / connections / select the connection and click settings.  Click on properties and go to work in network and select TCP/IPv4.  Under TCP/IPv4, select properties and make sure that the first page says get an address of DNS server automatically.  Click Advanced and then click DNS.  Make sure that the only two boxes checked are Append primary and Suffixes connection specific DNS and add relatives of the main DNS - nothing else suffix suffixes.  Click OK and save this.  This should solve the problem.  But I suspect that you already did (probably several times) so let's move on.

  The only other option that I can think of is to reset the TCP/IP stack that can get rid of the incorrect addresses and run and fresh with the correct settings.  Here is the procedure:http://geekswithblogs.net/mattcampbell/archive/2007/09/30/Resetting-your-whole-IP-stack-in-Vista.aspx.  I don't know if this will help, but if you are having problems with TCP/IP, it is one way that many people use to solve.  Then you will need to reconfigure the TCP/IP settings and then you can see if that does the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No advance WARNING when a limited time the user is disconnected

  I put in place until the account of my children (Vista SP3). There is however, no prior warning, when the spam of time has elapsed. The screen is just blank out of the blue!
  Is there a setting that I have the system to display a warning advance e.g. 5 minutes before reaching the time limit?

  Google comes up with no solution; Only third-party applications are given to access this feature.

  Solved on Windows 7.