Download Pro XI problem

Similar Questions

• OfficeJet Pro 6830: Problem with multiple Pages into one file

  I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

  I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

  Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

  Please advise.  Thank you.

  Hello

  Scan you from the glass flat or the top of the charger page?

  If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

  If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.

• CS6 first Pro installation problem

  I am trying to install the Premiere Pro CS6, but when I do, I guess these files are supposed to be pro first appear (note that I tried to install several times)

  

  I'm running on Windows 10 Pro 32 - Bit x 64 - according to the owner, the problem doesn't force me to do anything, if I leave and you try to install the Premier Pro, the problem occurs, and it is never worked before on my computer, I don't have Add ons.

  It's confusing me, CC said I installed it and I don't have Photoshop installed fine, but Premiere Pro is not, anyway I can fix this?

  Bryson,

  You need an OS to run Premiere Pro 64-bit. It has been like that for quite a while. Sorry...

  Thank you

  Kevin

• I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  Hello

  Please see the thread: https://forums.adobe.com/thread/2028937?start=0&tstart=0

  Kind regards

  Shelly

• I've updated the plan of the photographer and since the download, I had problems nonstop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or should I cancel

  I've updated the plan of the photographer and since the download, I had problems with non stop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or do I cancel my subscription to the CC and return to the CS6?

  The problem of fluidity can be the result of a graphics card problem:

  Try to uncheck the box in the preferences > performance > graphics processor use, then by restarting Photoshop. If this solves the problem, check with the manufacturer about a possible update.

  On the bridge: when you select an image and press the space bar, what happens?

• How can you download pro Prime Minister when the icon does not exist in the clouds? [was: pr]

  How can you download pro Prime Minister when the iucon doesent exist cloud?

  In order to download the software, your computer must meet the system requirements to run the software.

  http://helpx.Adobe.com/x-productkb/policy-pricing/system-requirements-Premiere-Pro.html http://www.Adobe.com/products/premiere/tech-specs.html

  The usual for not being able to download reason is that Premiere Pro (and other video applications such as After Effects) are 64-bit only what they need for a 64-bit computer and a 64-bit operating system.

  If you use a 32-bit computer and operating system, and then you see the icon of Premiere Pro as the software will not work on your computer.

• Download Acrobat Pro DC problem

  I tried to download Acrobat Pro DC. Gets to half way through and 'Conflict' will not download. Tried twice. Same error message. So far, I just downloaded illustrator of the Master Collection

  Hi Markpublishing,

  Please make sure that you don't have another version of Acrobat is installed on your machine.

  Reference: https://answers.acrobatusers.com/Acrobat-X-Pro-conflict-acrobat-reader-DC-q285211.aspx

  I hope this helps.

  Concerning

  Megha Rawat

• Download Adobe Pro XI problem

  Hello, I bought a downloadable version of Adobe on the internet and I'm having problems to complete the download. I followed the steps outlined in the email. Can someone help me with this problem?

  Hello, I was able to get the download to cross. Thank you for your

  quick response.

  Dennis J. Kohn Jr.

  Administrative assistant

• Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

  Thank you for taking your time looking in my question.

  My Machine: Macbook Pro retina no Mid 2012

  What I wanted: install win 8.1 pro 64 bit on a second SSD completely (without Partition) / replace the optical drive

  My problem: everything works fine, but no sound. Drivers seem to be the cause:

  
  How I installed windows:

  1. I put the own ssd in the main Bay + optical drive with disk 8.1 win

  2. Windows disk initialized and installed windows 8.1 64-bit without errors

  3 install the drivers for bootcamp support

  4 returned the Mac ssd go back to the main Bay and put the ssd of windows in the caddy and then in the optical Bay

  5. starting is by holding alt and choosing between mac os, recovery and boot efi (which contains windows)

  What I tried (all of the following are ineffective):

  1 reinstall/repair drivers bootcamp support from different sources (of the download on the website of apple and the bootcamp assistant application)

  2 reinstall the realtek drivers

  3. how to install intel drivers graphics hd 4000 (found a source who said it would do the trick, there is no)

  4 uninstallation of controller high definition Audio (it always seems to come back)

  5. manually download and install the drivers http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip cirrus

  I get the following error:

  

  6. place the ssd of windows in the main Bay

  7 troubleshooting sound (a 99% sure that this would not work)

  8 throw up my hands in despair and uncontrollable crying afterwards (was probably the most effective on 8)

  That I need clarification on:

  I found found some sources say that installing windows via EFI mode causes no sound, but I'm not sure if the way I installed it is considered to be the efi mode as I have never had an option for efi mode. However when I start upward and hold option the name of the windows disk named ' BOOT EFI. Efi mode is how I installed windows?

  What I need instructions on:

  Some sources claim that I need to install windows in hybrid MBR mode however I do not know how I would install windows any differently than the way I did above. How can I go about installing, not in start efi mode, if I want to spend the whole ssd for windows / that I would do anything differently than the steps I listed up there?

  Thanks a lot again for your time and help!

  Windows must be in the main Bay and must stay in the main Bay after installation. You can either use the wizard of BC and create a USB installer which will also create a legacy BIOS/MBR W8.1 (default value for your specific model) or if you choose to do it manually, make sure that the icon of Windows from the installation media, not EFI Boot.

  If you start from the DVD W8.1, the default value is Boot EFI. BC Assistant did a bit of work for you, in order to avoid the is not a good idea.

• Satellite Pro A300: Problem with Microsoft Security Essentials

  Hello

  I have a Toshiba Satellite Pro A300 with XP SP3 and now deleted AVG Free and installed Microsoft Security Essentialls (MSE).

  The result is after installing MSE and begin my laptop cursor is stuck in the center of the screen and will not respond to the inputs of the mouse or the keyboard.

  In aid of F12 to get my startup options allowed me to try the Safe Mode and last known good Configuration etc but they all show the same functionality, IE freeze when the desktop appears. XP seems to be operating in the background, for example system clock stays on time, "notice" system if its wifi singal is removed etc.

  Just to make the day to try to do an OS reinstall pressing 0 to on has no effect - system just boots in XP - so I can't my recovery partition!

  I have now is not a HW problem as the /kbd cursor works if I boot into a non-windows system, for example UBUNTU CD

  Any suggestions welcome - such as can I download a recovery on antother PC CD and burn a recovery CD?

  Hello

  I have no idea what happened after installing Microsoft Security Essentials, but it seems that you are not able to access the files on the HARD drive
  I think you need to reinstall the operating system using HARD drive recovery.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  But this would format the system partition :(

  In order to save the files from the HARD drive, I recommend using / boot from a bootable floppy from Win PE.
  Win PE (also called BartPE) is a thin window OS that is bootable CD and don t need to be installed on the HARD drive.
  http://en.Wikipedia.org/wiki/Windows_Preinstallation_Environment

  Select this check box.

• Virtual sound on Satellite Pro A100 problem

  Hello.

  I have the Satellite Pro A100 (PSAAC) "PSAACE - 00200DG 3"with Windows XP."
  I recently formatted my hard drive and run my Toshiba Recovery CD. Everything worked very well. As I downloaded the latest drivers for my computer including the Toshiba Virtual Sound drivers. After I deleted the old Virtual Sound driver and started installing new version of same message appears "Toshiba Virtual Sound can't stand your computer."
  Then I tried to install a later version of the same thing that was on the recovery CD and I would get the same message again. Moreover, after any new installation of Windows XP, Virtual Sound works OK. Please someone had the same problem and could you give me a solution.

  Thank you!!!

  Have you downloaded the right version? I mean the version for your model of laptop (PSAAC)?

• Startup MacBook Pro-comment problems prevent health going to disk/check once again

  My 13 inch Macbook Pro running OSX 10.9.5 (said mid-2012, but it was purchased in fall 2014) has had problems starting

  A few weeks ago the computer is stuck on the loading screen (white, with the Apple and the buffering of spinning icon) without marketing properly. After you have manually turned off and left for a long time he worked well on the next test, so I took care of it has been saved and so didn't think much, and it works pretty well in recent weeks, sometimes being a little slow but that very occasionally and not debilitatingly so and it probably is not related to this problem.

  This morning it was still once stuck on the loading screen, and try again in 5 or 6 times solves nothing. The VRAM reset did not help either. After an attempt to boot into safe mode (filled a little progress bar then disappeared and the computer continued to buffer without purpose), I once again reset the NVRAM and tried a different boot safe mode, with the same results. But this time I left it half an hour or so and on the next attempt (start normally) it miraculously worked a new and everything seems functional. After a new backup with a preparation period slightly extended backup (at least half an hour on the first abandoned attempt, then at least 15 minutes, until correct on the second trial has started), although it is common on my computer, I have enough fear turn the computer off and tempt fate again, if I want to see what can be done now.

  What should I do to check the health of the disk, potentially fix it, find out why this is happening and avoid this problem again in the future?

  I decided to watch from the disk utility and am confused by the Setup program. There is an 'APPLE HDD Media HTS541010A9E662' entry in the list, with a "MacIntoshHD" paragraph below, and both have different information displayed... I ran check disk on the higher level entry and it seems to be out very well ("the Volume Recovery HD seems to be OK"), but I haven't run one on the low level input as it says my computer may be "slow and unresponsive" while doing so, and I'm not entirely sure of what use there.

  It cannot be storage associated with as I stil have 610 gb of free 1 terra (although a large part of what I have (130 GB) is in the other category for a reason any).

  How to fix the slow down time and start. | MacTip.net

  Resolve startup issues and perform maintenance on disk with disk utility and fsck

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  Repair the hard drive and permissions - Yosemite, Mavericks, Cougar or Lion

  HD recovery start:

  Restart the computer after the ring, press in and hold the ORDER et R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Now, download and install the update of OS X Mavericks 10.9.5 (Combo)

• HP pro 3500 - problem with ethernet driver

  Hello to everyone.

  I have a HP 3500 Series Macrotower pro and I have problem and I can not find how to install the ethernet driver.

  Can you help me please?

  Thank you very much

  Hello:

  If you are running Windows 7, download and install the second pilot on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

• [New Sony Vaio Pro] WiFi problem!

  Hey!

  I recently acquired the new Vaio Sony Pro 13 "."

  Everything seems to work admirably except for the Wifi card.

  In fact, the card works fine in a range of 15 feet around the router.

  But when I cross this beach, wifi download & upload speed drop strongly: download of ~ 20Mbps to 0, 5Mbps!

  This problem is clearly linked to the Vaio Pro as the other computers in my household are not such questions.

  What I tried to do:

  > Re-install card driver intel (available on the Sony site)

  > Change the properties of the map

  Unfortunately, these actions did not solve the issue...

  Do you have any idea what could be the problem and a way to fix it?

  A few ideas:

  > Card vice (bad connectivity,...)

  > Global issue with new laptops Sony Vaio Pro

  > Not good map properties

  > ???

  Hoping to get some answers,

  Kind regards

  Jon

  
  

• HP Officejet Pro 8620: HP Officejet Pro 8620 - problem with wireless connection w/computer

  Hi all

  I recently bought the HP Officejet Pro 8620 and I have problems connecting with my computer.

  I used the Setup Wizard to connect the printer to the wireless network of my University, and when it's over, the blue light of connectivity remains a solid blue and the screen says it is connected, which is great. However, when I use the HP Officejet Pro 8620/software of connection instillation, I always get the message,

  "-L' the entered IP address is either incorrect, or it is another wireless network that has the same name as your network." Please ensure that your printer has this IP or enter the correct address below and click on search. Also, confirm that you wireless network is unique. »

  I did somehow on the printer IP address is copied 100% exactly the same with the points and the message still appears and my printer is unable to connect with my computer. As another option, it says that I can use the host name to find the printer as well. However, the same thing happens. I'll type in the name of host by number and letter by letter, and again, it does not find my printer. In addition, there is only 1 network name so I know I hit the right one. Being a student, it is very important that I get things printed off the coast, it is essential for me to solve this problem. Also, I spent a lot of money on it so I need to work properly.

  It should be easy to communicate that it gives me all the necessary information right in front of me, but as I said, it was not easy or fun experience. I don't really know how IP work addresses but I tried to use all the only thing that I can find that is relevant. From now on, I have to record everything in PDF format on my computer, send me unwanted, printing documents download them on my Galaxy Note 4, connect my phone to the printer using the wireless HP Direct on the Officejet and then finally I can print my things. Yes, it works like this, but it is also a concern and I shouldn't do that. I realize that I can't buy a USB link cable to connect my printer to my computer but I don't want to ride the 2 every time I want to print.

  (Also something to note, since I'm on WiFi from the University, I don't have access to the router of course so I don't know if this is a contributing factor in why things do not work).

  If anyone has suggestions/advice/answers on the issue, please let me know. Thank you!

  Hello @Plz_Help.

  Welcome to the Forums of HP's Support. I understand that you have a problem connecting to your computer and your printer via Wifi from the University. I would like to help.

  The only thing that really POPs, is that you use the network of universities. This can cause a lot of problems.

  Question: When you connect your computer or Note 4 on the network, should a pop-up saying you accept the terms of service? If so, this would prevent an air of challenge the printer properly connected to the network.

  If you had access to the router I would recommend checking the network connection by typing the printers IP address in a web browser. If you can access the printers webserver shipped, then, the connection is fine. If you can't you need to reset the router. Of course, you can do this.

  Also, here's something to consider: If the printer successfully on the network, everyone else on the network will have access to your printer.

  A USB connection will be the most reliable and safe way to go. Another thing, why send your rating 4 print jobs? Why not save the PDF files and connect the computer to the wireless network direct printers? In this way, you can print from your computer.

  Sorry I can't give you a solution ' to do this and it will work. You must convince the universities IT department to get things related.