Download speed drops but returns to normal after reboot

Similar Questions

• white background of the screen of my HP dv9700 turns blue powder when open completely, but returns to normal when I close to halfway...

  white background of the screen of my HP dv9700 turns blue powder when open completely, but returns to normal when I close to halfway...

  Hello

  You did changes to the computer before the show?

  There seems to be a known problem with DV 9700 model; I suggest you to contact the HP support team for assistance.

  http://WWW8.HP.com/us/en/contact-HP/contact.html#

• Download speed drops to 15000 + kbs to 7000-12000kbs after the installation of Vista Ultimate

  I've recently upgraded to XP Home to Vista Ultimate. I have Time Warner Cable as my ISP. After upgrading my download speed went from 15000 + kbs to maximum 12000kbs. My download speed has not changed.

  I have removed the excess programs and am initialization with minimal configuration. I use IE8. Using Firefox is not better. Everything seems to work fine. Average download is now 9000-10000kbs. Time Warner Cable has checked evertyhing, street speed is 24000 kbs.

  Somewhere, something must be running somwhere and eat my bandwidth. I can't find. Also, using Norton 360 v4. Can anyone offer ideas about what happened when I installed Vista?

  So it comes to a computer you built yourself or built a generic, not a machine OEM brand? If it is an OEM brand machine you get the drivers from the website of the OEM, not directly from Intel. If it is a generic office, try to throw in a PCI network card and see if that helps. One you use is perhaps not all that compatible with Vista. MS - MVP - Elephant Boy computers - don't panic!

• IPhone 6 dropped, the screen goes black, but returns to normal

  I dropped my iphone 6, initially, the screen was black, but everyting worked perfectly I could even take pictures. I put on charger and tapped on the back of the iphone and the screen comes alive and everything was normal, nothing strange occurred during use, but after blocking and leaving intact, the black screen again to open. I had to put it in the charger and the tap at the back as before. Now I can't leave my iphone intact or the screen will become black again. I need help please! Is there a solution for this or would I need to take it to a shop to fix it?

  Hardware problems should be diagnosed at the Apple Store, or an authorized service provider.

  My guess would be that you probably have a damaged connection or in bulk as a result of the fall. That is why she helps when you press back.

  Backup your phone to iCloud and iTunes (encrypted) while you still can.

• Photoshop button in the State of the asset returns to normal after turning over?

  Hello

  I work on a site of reference glossary in Muse and have hit a roadblock with my buttons in photoshop.

  I created the menu buttons in Photoshop that have two different States - an asset and working capital and another for normal and down (the button is actually saved with four layers/States, one for each, but for what the user sees, it's really only two options). I used these menu buttons as triggers of reversal for blank publications, and when the user hovers over the button, the page name will appear below and then disappears in slowing (otherwise the names ecaple and it would look very crowded).

  The issue I found is that when I preview the page in my browser, the buttons seem to work properly as they appear in the active state, which indicates that the page they are linked is one they are on.

  Initial view - homepage:

  

  .. .and when I reversal of the image of the page that I am currently on, the button displays the name of the desired page, like so:

  

  However, when I have the deployment, the button goes back back to the normal/down state, even if I'm still on the home page.

  

  Here is a screenshot of the composition settings that I set up for this widget. I tried the target 'hide' switching to zero, but as the target refers to the word 'Home', the word 'Home' has remained visible and more button remains in the active state, which is not what I want. I also tried selecting "triggers on Top", but the problem was solved not here either.

  

  What Miss me? How can I make sure that my button remains in the active state when it is on it is linked to the page?

  Thanks for your help!

  Rachel

  Looks like a bug that is the impact of the meaning overloaded state 'active '. 'Active' is the State used for an article with an applied hyperlink that points to the current page (or an anchor point in the current scrolling range on the current page) and the State used for a trigger or a sticker in a widget of Composition or a slide show that matches one element current assets of the composition or the slide show.

  It seems that we honor the hyperlink definition of 'Assets' on the loading of the page for a composition trigger with a hyperlink to the applied current page, but not to honor this definition of active when the transition to having no element in the composition active (or when presumable to transition to another element of the composition is active).

  The only solution that comes to mind would be the approach very tedious to reproduce this widget of composition on each page, delete the hyperlink on the 'active' trigger and put shaped manually its 'Normal' State for Quicken.

  I wrote the bug. However, it cannot be corrected immediately. (We tend to collect small bugs in a box and then answer all at once or when other changes are planned in this area, because of the overhead involved in the ramp up to work on a surface and completely redone the test after changes).

• Download WRT110 speed drops if I use ESET NOD32 Antivirus

  My PC: Pentium 4, Windows XP SP3 home edition.

  D - Link dsl modem, router Linksys WRT110

  DSL 15 Mbpsdownload speed.

  WIFI disabled.

  A PC connected to the router.

  With NOD32 Antivirus installed on my PC and without the router:

  Download speed is 15 megabits/sec.

  With the router and NOD32 installed on my PC:

  Download speed drops to 2 megabits/sec.

  If I uninstall NOD32, everything is OK.

  the download speed is 15 megabits/s new

  (with the router).

  What should I do?

  Download speed of connection, NOD32 Antivirus, internet slow is OK once again - SOLVED!

  Internet (ISP) - D-Link DSR-360R ADSL2 + modem-

  Wired ethernet - Linksys WRT110 router-

  -Network card integrated Realtek - PC Pentium 4.

  - Windows XP Home SP3 - NOD32 Antivirus - Firefox browser

  15 Mbps speed I can get only 1 Mbps of download

  I found a solution to this problem:

  I have this experience at the start of Windows XP is:

  My NOD32 starts slow, it takes about 1 min 35 sec, until everything is frozen on the screen:
  http://www.abload.de/IMG/boot_photom4f6.jpg

  And NOD32 also does:

  This is how he should like my system tray after installation and use of NOD32
  If I connect directly to the internet.
  But this is a rare opportunity:
  http://www.abload.de/IMG/alloftheiconsdisplayeddo2f.jpg

  Namely, my network card icon disappears quite often if I have NOD32 installed on my PC.
  It works, but somehow it does not appear on the system tray:
  http://www.abload.de/IMG/network_icon_doesnt_ap3scz.jpg

  And it also happens that the NOD32 icon does not appear on the system tray.
  but it works in the background and catches the virus to be a.
  http://www.abload.de/IMG/nod32_and_network_iconxraq.jpg

  So, this can be a problem: NOD32 and my network card are disturbing each other?

  I did a search on Google: slow internet nod32

  found this:
  http://www.wilderssecurity.com/showthread.php?t=140298&page=3

  #58 gave me an idea

  Really my network integrated some card problem?

  (Realtek RTL8139/810 X Family Fast Ethernet NIC)

  This is why I made the following points:

  1. I have installed NOD32 and PC restarted.

  2. uninstalled the driver for my network card,

  3 , I took the original CD, I had to my motherboard

  and I reinstalled my CD drive integrated network card driver and restarted the PC

  (something tcpip.sys has been installed during the process - as my firewall displayed)

  And that's. My download speed is like never before. It works perfectly.

  Measures of the website speedtest.net always silly results if NOD32 is installed.

  but who cares. The download speed is OK: 10-15 Mbps

  Even if I connect to the internet via the router.

  And what is more, it seems that my PC is a little faster than before.

  After you have reinstalled the network of my network adapter driver, I measured this datas:
  
  NOD32, direct adsl connection:
  http://www.abload.de/IMG/xpsp3_direct_adsl_nod3m19c.jpg - stupid speedtest
  BUT
  http://www.abload.de/IMG/xpsp3_direct_adsl_nod3134f.jpg - perfect
  http://www.abload.de/IMG/xpsp3_direct_adsl_nod3d31q.jpg - perfect

  We can say, it's a good download speed, BUT speedtest results are false.

  
  NOD32, router connection:
  http://www.abload.de/IMG/xpsp3_router_nod32_firx4bx.jpg - stupid speedtest
  BUT
  http://www.abload.de/IMG/xpsp3_router_nod32__dif307.jpg - perfect
  http://www.abload.de/IMG/xpsp3_router_nod32_jdo33l8.jpg - perfect

  We can say, it's a good download speed, BUT speedtest results are false.

  When NOD32 is uninstalled and antivirus is installed:

  No Antivirus, direct adsl connection:
  http://www.abload.de/IMG/xpsp3_direct_adsl_nod3q2ls.jpg

  No Antivirus, router connection:
  http://www.abload.de/IMG/xpsp3_router_nod32_unic4fq.jpg

  My download speed is OK now,

  but the slow start has not changed.

  .

• Updated from Apple x download speed

  I tried to update my iPhone a month 6 this morning (because iTunes told me that it was a new version of the iOS).  I chose to download and I got an estimate of 38 minutes.  After about 15 minutes, I was up to about half of the remaining files and 21 minutes left.  I am away from my computer (Mac Mini, OS, iTunes, etc.) and I got a message that the download could not be not done, no reason why.  I restarted the download and got an estimate of 17 hours to download.  I started the download anyway and is now to show that it is actually downloaded (increase in MB) download, but the estimate of the remaining time is now in more than 22 hours and goes upward instead of down.  Also noticed that although there is a download past (from any site) my Wired Apple mouse scrolling works only in the way down, using any application, not only of Safari.  After a download is complete, he returned to normal.  BTW, there are no other devices not connected to the internet, with the exception of a Mac Mini AND I live in the country where there is no 'interference' from other devices, there are very few people on my ISP connection speed issue exists only when downloading updates on Apple's site (streams Netflix etc. fine and speedtest shows more than 10 Mbps.  What is going on?

  The Internet is also called the World Wide Web for a reason. Each intersection where web threads meet is a major Internet connection where traffic can build up and slow down your download. Or a web wire could break causing the Internet redirect download packages around this break. In other words when your Internet slows down it just didn't say where the slowdown is or what is the cause. Maybe that it's Apple, maybe it's an Exchange along the way. The wire coming from your House or apartment is perhaps the problem.

  All I know is, like you, sometimes my downloads are fast and other times they are not.

• LRT224 and WAP801N of TP - Link point of access - low download speed

  I just installed a LRT224 for the use of two ISP connections, one is a modem connection cable with 75 Mbit/s and the other a connection ADSL 4 Mbit/s in download. It is reserved for the failover.

  For the WLAN access point, I use a WA801N of TP-link v2 with the latest firmware.

  When I connect this access point WA801N directly to the cable modem, I get about 75 Mbps of download speed.

  What is the case, when I use a LAN cable to connect to the LRT224, which includes 75 Mbps.

  But when I connect the WA801n to one of the LRT224 LAN ports, the download speed drops to about 10 Mbps.

  The LRT224 is configured to function as a DHCP server for my LAN, all devices get their IP by DHCP to the 192.168.2.x row address. The main WAN connection is configured to use addresses 192.168.0.x, the other WAN connection to use 192.168.1.x.

  Everyone knows about similar problems using a WIFI (b/g/n) access point?

  Thanks for any help.

  Okay, I think that the question is the access point.

• Download speed very slow on the wired Ethernet connection

  I am currently getting 200 Mbps down and 0.3 MB/s on my desk wired Ethernet connection. I should get 200 down and 20 upwards.

  • On my wireless adapter on the same router, I have ~ 18 Mbit/s to the top and about 15 Mbit/s down, which seems that the wireless adapter works fine.
  • I plugged in another computer with the same cable on the same router port and got the full speed (200/20), then the problem lies within my computer.
  • I made a transfer of files to and from my computer to another computer connected to the same router and I got the full speed Gigabit times come and go.

  I searched high and wide on the internet and forums, and that many people have had the same problem I have, nothing of the multitude of solutions worked for me.

  That's what I tried without success:

  • Uninstalled the Ethernet card, deleted the drivers, forcing the new drivers to install again. No change of speed.
  • Carefully checked for Virus and malware programs (crossed the registry as well), but found nothing, and nothing has been installed recently other than windows updates.
  • The only antivirus I have is Windows Defender. I turned off and turned off the Windows Firewall, but speed did not improve.
  • I tried with IE, Chrome and Firefox, speed with different services and all tests show similar speeds. I also used FTP to a server I have, and the speeds were the same.
  • There is no other traffic devours bandwidth.

  So what I have gathered so far, it's that my Ethernet card works very slow only when downloading from the internet. Within my network, it works fine.

  What is a service that does not work well? If so who? I am not knowledgeable on the use of all services. I checked IPv4 and IPv6 and they both seem to be configured correctly, but I can't say that I am certain of what "correctly configured" is.

  These are my specs:

  HP Desktop H9 - 1215t

  Windows 7 Ultimate SP1

  32 GB OF RAM

  64 bit

  Chip Intel i7-3770

  Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)

  I would really appreciate some help here because this problem I'm paralyzed.

  Thank you for your time,

  Tom

  By George, you got it!

  For someone who thinks he's good at Googling, I could sure use some improvements!

  The key has been the link to explanation. While I had been close to my tests, this for shows that even when you sort-of-one little-peut-be-think you know what you're doing to keep your legs unless you know EXACTLY what you are doing.

  The answer was definitely Large Send Offload, but it was a little more complicated, at least to understand what really happened. Neutralization of him gave the tour, but now I work with an active v2 and it works like a charm.

  I will detail what, in my opinion, happened here for those who may have similar problems so that they (you) may be able to figure out, as all cards are different and may require slightly different settings.

  I live in an area where so far the download speed over fast, I was able to get is 2 Mbps, on a good day, it's usually on average 1 ~ 1.5 Mbps. download speed is between 5 ~ 20 Mbit/s.

  I do a lot of video work and I constantly have to download large files on my servers. I got the computer described above about 8 months ago, and my Age (2 years) one remained on my home network.

  For a week or two, I was cursing my ISP because the internet was slower than usual and very glitch. I tested my speed and got 20 down and 0.2, repeatedly. So I went through the long and technology-challenged call representative to 'help' me, I was paying for 20/2. Only option was to wait a week for a technician to come out of my house, he stressed have shot my injurybut not before you ask me, that there are faster speeds to internet available in my place. 200/20 which is 10 times what I had, so of course I went with her. In doing so the representative asked me to Exchange my modem/router for a new handle faster speeds.

  When I replaced the modem/router, I found that the download speed went from 50/0.2 (after the new request speed but still with the old router) to 200/0.3~0.5 with the new router. I also had a Cisco E2000 router that I turned into a switch, which was also bogged down internet high speed (now that they have been much faster). But still the download speed has not really improved.

  This long and winding history is so that you (read this with a similar problem) might find the answer to your particular problem.

  Looking back when I said that the issue was in my computer because that became high speed was not quite accurate. The 'problem' was beyond my router, if the solution was in my settings with the LSO parameter. The 'problem' was not really a problem since what I see (guess) that's happened is that my ISP has been updated with equipment, and the settings on my new pc has become a problem while paradoxically not so in my old pc.

  My old pc equipped with a "Realtek PCIe GBE Family Controller" and the IPv4 LSO parameter turned on, that she was no problem under the new set of circumstances ISP. 200 / 20 Mbit/s.

  Then when I compared the setting on my new computer, it never crossed my mind that the neutralization of him would solve the problem.

  My new pc has a Atheros AR8161/8165 controller PCI-E Gigabit Ethernet (NDIS 6.20). This adapter has a setting "IPv4 LSO" more setting "IPv4 LSO v2" and "IPv6 LSO v2" décor. I don't think that my ISP uses IPv6.

  In my quest to solve the problem, I placed all of the above settings to "Enabled", without success and in my fog don't reverse these settings.

  With the 3 off, it worked fine, but I got a 5 ~ 10% improvement on the download speed with the LSO IPv4 v2 enabled and the other disabled.

  There is no way representing the service provider on the phone could know this, so calling them would not / has not solved the problem. Even waiting a week for the technician most likely would not have solved the problem as it would be measured using a laptop full download and the download speeds.

  I'm sure this will become a problem most current internet speeds that House are starting to soar (thanks Google!), so I hope this helps those who have similar problems.

  To summarize:

  Click on start->Control Panel->Device Manager->network adapters-> your adapter name (mine is Atheros AR8152/8158 PCI - E Fast Ethernet Controller (NDIS 6.20), right click and select Properties. On the advance tab, find good Large Send Offload (IPv4) and change its value to disabled , and then click on OK.

  If you have a Large Send Offload (IPv4) v2 try to set that to enable (with either a handicapped of course).

  I hope this helps!

  And thank you George.

  Tom

• RV042 causing 10 X reduction in the internet download speed?

  I have a rv042 router that is used for the base and internet telephone VOIP (without VPN).  I have recently started having poor quality phone and called my internet provider to help diagnose the problem.  He noticed that when my computer is connected directly to the modem, the download speeds are about 3-4 Mbps.  However, when connect us the modem to the RV042, then my computer download speeds drop to all 0.3Mbps.  I am under the version of the firmware 1.3.12.19 and SPI and Multicast disabled.  Is that what sounds like the router is defective and the time to buy something new?  Or the window, I could simply have something strange that might lead to a reduction of X 10 download speeds? 1.3.12.19 - tm Firmware Version: 1.3.12.19 - tm Firmware Version: 1.3.12.19 - tm

  Hey Marc, try disabling SPI function on the firewall.  It inspects all packets through the firewall and performance is reduced.  Another thing you can do is go to the bandwidth under the management of the system and set the download and upload manually to what your ISP gives you.
  

• Slow download speed after downgrading to Windows 7 64 bit

  Hi all!

  I'm new here! My first laptop is a Toshiba Satellite since 2003. Since then, I got one couple of others.
  Now I bought a new: Satellite P70-A-11V, a portable professional high-end computer, which came with Windows 8, which I upgraded to 8.1.

  Unfortunately, the degraded system so bad that all pendrives made plant. I have connected my Toshiba camcorder, and it also crashed the laptop. The search indexing was not working outside the C: drive. The pointer of an optical mouse has started to freeze for seconds on the screen.

  This last problem, which I think was due to the low power USB ports. So, I really had no choice after 2 restorations system total and installed Windows 7 Enterprise x 64 SP1. The operating system seems ok, but I always have problems, and one of them is that my download speed is very low, as well with LAN cable or wireless. I can't tell how is download speed.

  My internet provider provides 100 MB/s internet access via optical cable. I test on Speedtest.net and normally, it gives a range of 50 to 80 Mbps actual download speed. Then, if I check the speed of the connection Wireless wireless connection status, I experience a maximum of 130 MB/s, which is constant. Large.
  Yet, no download occurs at a speed of wretched 400 to 500 kbit/s, as if it was a dial-up connection. This problem was not present before.

  I tried to change several settings according to the forums, but nothing helped. I disabled the firewall and stimulated wireless (duplex 100 MB) and also tried through LAN cable. The rated speed is great, but apparently the slowness problem is inside the laptop, not outside. Any ideas will be greatly appreciated!

  I checked the Toshiba download page and your laptop is fully supported for Win7 64 bit. Drivers LAN and WLAN are available also so I hope that you have installed all the drivers, tools, and utilities including LAN and WLAN. Can you confirm this?

• After spending about a virus now my PC is in safe mode and will not return to normal. What can I do?

  After downloading an updated version of the Internet Exployer, I received a virus called system tools. It really messed up my laptop. I paid to download a cleaner, but tool systems let me download only in safe mode. Now I can't get my laptop back to normal. In safe mode, printing is so great, that it is difficult to navaigate. Now every time I have open an email or a Web site I get this pop up that says it is a non-secure site and click to run. I want to get rid of this pop up. I have turn turn off my machine and selected normal mode, but when it restarts automatically returns to safe mode. I have done this several times with the same results. Help, please. Thank you, Karen

  Hello

  1st thing to do is to make sure that your computer is completely clean of malware

  What exact process did you remove it?

  Here's the right way to remove it

  change you the malicious software LAN what settings can be changed, then stop the process before the scan with Malwarebytes Anti-Malware

  read this tutorial

  http://www.bleepingcomputer.com/virus-removal/remove-system-tool

  and to change the startup mode:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.

  1. The System Configuration utility will open and you will see a screen similar to the one below.

  Click the Startup tab.

  1. You will now be on the screen start as shown below options.

     Click the Startup tab.

  2. You will now be on the screen start as shown below options.
  • and under the STARTUP tab, make sure that SAFE BOOT is not checked

• Pavilion g6-2260sh but slow download speed download is very good

  Greetings!

  I have a HP Pavilion g6-2260sh laptop with Windows 8.1 Pro operating system.

  My problem is that the internet download speed fell from 80 Mbps at 3-4 Mbps. Download speed remained the same as before, the 25 Mbits. My laptop is connected to a router with another laptop and a PC. These 2 computers have excellent internet speeds.

  I reinstalled the operating system, but the problem persists. After reinstalling, the speed was very good, maybe an hour and then she fell to 3-4. I only installed the drivers from hp, nothing else driver finder.

  I tried connecting by cable and wireless with the same results.

  The Device Manager shows 1 unknown device and 1 missing driver for Ralink_RT3290_Bluetooth_01

  Please help me,

  Jandras

  Well, I found the answer in a comment on a youtube video...

   

• Greatly reduced after standby download speed

  About 2-3 years ago my dropped download speed of about 14 Mbps to 5 Mbps after getting out of the mode standby.

  I am running xp with all updates and everything works ok - cpu temp is ok, HD temp is ok and works well and motherboard temp is ok, all times are running C. 38-42. This can happen after an update from Ms. Everything works well. This unit was bought new in 05 and only 2 hardware problems that have been fixed - audio device replaced after about 6 months and one power supply has been replaced in the last year or so.

  Of general interest, I'm running an Athlon 64 3000 + and AMD All In Wonder 9600 with 128 MB card.  In general, the amount of energy is reduced in sleep mode, a value of % is ok.

  Many thanks - Doug

  Hi Dougin,

  Thanks for posting your query in Microsoft Community.

  According to the description, it seems that you are having problems with slow connection speed. I will definitely help you with this problem.

  I would appreciate it if you could answer the following questions to help you best:

  (1) Explorer that is installed on your computer?

  (2) you have latency issues when browsing?

  (3) you use any Download Manager to download files?

  (4) you are using cable or wireless Internet connection?

  (5) is the issue limited to a specific download?

  (6) you use Internet Explorer to download? If Yes, what version of Internet Explorer is installed on your computer?

  For reference:

  Possible issues and resolutions for slow connection in Windows XP speeds

  http://support.Microsoft.com/kb/310590

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Low download speeds Internet Sophos UTM VM - but only the other virtual machines; Physical PC without issue

  So I have something very strange going on. I have a Dell custom host ISO on a Dell R310 ESX 5.5. My problem is that the Internet download is bad, but ONLY to other virtual machines. The Upload is normal physical computers.

  I currently have 4 virtual machines running:

  FreePBX, Win 2012 R2 Server, Sophos UTM (ISO VMware with the latest updates) and Win8.1 Ent.

  I have the following physical machines, I also used for testing:

  8.1 Win Office - wired

  Win portable 8.1 - wireless

  The lower test details, you can see on the image below.

  Iperf tests with 64 k window:
  Win Server 2012 to VM VM win 8 - 6.8Gbps <-VM VM good xfer
  Wireless Win 8.1 laptop to Win 2012 VM Server - 172Mbps <-VM to the well physical wireless
  Desktop 8.1 Win Win Server 2012 VM-619Mbps <-well wired VM
  
  Xfinity speed tests:
  Wireless laptop: 90Mbps down, 9Mbps place <-physical good Upload PC speed
  Wired Desktop laptop: 90Mbps down, 9Mbps place <-physical good Upload PC speed
  Win Server VM: 86Mbps down, place 0.6Mbps <-SLOW on VM!
  Win 8 VM: 90Mbps downwards, upwards 0.6Mbps <-SLOW on VM!
  
  As you can see in my tests, the only place the problem presented is VM to the internet. Physics to the internet works fine. My only thought is that there is something with the switch to the host or the MAC address.

  
  

  I don't think it's the Sophos Nic because it works very well from the physical to Sophos to Internet. I also have a ticket with Sophos Support; they look on the side of Sophos.
  

  Thoughts?

  

  I sent Wireshark packet capture of the Sophos support and they had this to say:

  This is to inform you of the issue, you face the slow, ask you please see attached screenshot of the capture of packets. We have found the package wth ECN (explicit congestion Notification) and CWR (Congestion window reduced on the VM machine, please get this checked with support of virtual machine or VM adapter. This happens when he fell over packages and the congestion window is reduced, that the issue is not with the UTM.

  In addition, indicator of Congestion window reduced (CWR) is defined by the host sender to indicate that it has received a segment TCP with the ECE flag set and that she had responded to the congestion control mechanism that indicates there is a congestion in the patch.

  So I did some research and the solution is to disable all options of unloading in the advanced settings of the NIC as shown in these two links:

  Cyber Explorer: Improved VM broadband network VM on an ESXi platform

  Disable offloading TCP in Windows Server 2012 | Knowledge Center | Rackspace Hosting

  This solved my problems. I now cross 9Mbps downloads on my VMs. hope this helps someone else!