Download the data using UTL_FILE

Similar Questions

• BLOB data in the directory using UTL_FILE

  Hi all
  
  "I wrote a procedure to store BLOB data in the directory using * UTL_FILE.
  
  
  
  Using the package UTL_FILE, I created procedure below. Procedure runs successfully without any error, but the file is not written to the directory. Pls find my procedure below.
  * CREATE OR REPLACE PROCEDURE Write_BLOB_To_File
  AS
  v_lob_loc BLOB;
  v_buffer RAW (32767).
  v_buffer_size directory.
  v_amount directory.
  v_offset Number (38): = 1;
  v_chunksize INTEGER.
  v_out_file UTL_FILE. TYPE_DE_FICHIER;
  BEGIN
  -- | SELECT THE LOB LOCATOR
  SELECT an attachment
  IN v_lob_loc
  ATTACHMENT
  WHERE attachment_id = 720;
  -- | DISCOVER THE CHUNKSIZE FOR THAT LOB COLUMN
  v_chunksize: = DBMS_LOB. GETCHUNKSIZE (v_lob_loc);
  IF (v_chunksize < 32767) CAN
  v_buffer_size: = v_chunksize;
  ON THE OTHER
  v_buffer_size: = 32767;
  END IF;
  v_amount: = v_buffer_size;
  -- | OPENING A LOB IS OPTIONAL
  DBMS_LOB. OPEN (v_lob_loc, DBMS_LOB. LOB_READONLY);
  -- | WRITE THE CONTENT OF A LOB IN A FILE
  v_out_file: = UTL_FILE. FOPEN)
  location = > "EXAMPLE_LOB_DIR"
  filename = > "Test.doc."
  OPEN_MODE = > 'w ',.
  max_linesize = > 32767);
  While v_amount > = v_buffer_size
  LOOP
  DBMS_LOB. READ)
  lob_loc = > v_lob_loc,
  amount = > v_amount,
  offset = > v_offset,
  buffer = > v_buffer);
  v_offset: = v_offset + v_amount;
  UTL_FILE. () PUT_RAW
  file = > v_out_file,
  buffer = > v_buffer,
  AutoFlush = > true);
  UTL_FILE. FFLUSH (file = > v_out_file);
  -UTL_FILE. NEW_LINE (file = > v_out_file);
  END LOOP;
  UTL_FILE. FFLUSH (file = > v_out_file);
  UTL_FILE. FCLOSE (v_out_file);
  -- | THE LOB OF CLOSING IS REQUIRED IF YOU OPENED IT
  DBMS_LOB. Close (v_lob_loc);
  END; *
  
  
  I have provided the necessary privileges for the schema and directory. But the file is not written to the directory. can you please advise me

  OPEN_MODE-online 'w' change to open_mode-online "wb."

• Download the data recorder of NOR

  How can I download the data recorder of NOR?

  It depends on what OS you are using and what data logger you talk.  Do you mean Signal Express or the data recorder included with the NOR-DAQmx Base driver?

  Signal Express for Windows

  NOR-DAQmx Base for Mac OS X, Windowsor Linux (Mandriva, OpenSUSE, Red Hat WS 4 or 5 only).

• Download the data page in the database Application example

  Can anyone help me in the process to create a page to download the data to a spreadsheet (csv or tab delimited file) to an existing table or a new table.

  Attached file has screenshots of the page I'm talking about.

  Thank you

  Prasanna

  Hello

  Documentation can help

  https://docs.Oracle.com/database/121/HTMDB/advnc002.htm#HTMDB28980

  https://docs.Oracle.com/database/121/AEEUG/upload_data.htm

  Kind regards

  Jari

• Writing a file on the network using UTL_FILE

  Hi all
  
  Can we write a file on a path to the network using UTL_FILE. I have full access on the network folder, which I use as directory object.
  
  Details of the environment:
  Oracle Database 10g XE
  WIN XP
  
  
  Concerning
  SIS

  SMON wrote:
  but I remember not so utl_file works with UNC paths or not, just try it & see!

  To do this, if the account that runs the writing has permissions to the destination. We use UNC paths in some of our environments.

• What is needed to download the software using Adobe Download Assistant?

  What is needed to download the software using Adobe Download Assistant?

  Adobe Download Assistant mainly use Adobe AIR.  This allows him to run as its own program instead of requiring the use of a web browser.  Adobe AIR is cross-platform and is currently compatible with Mac OS, Windows XP, Windows Vista and Windows 7.

  Click here for more information on Adobe AIR.

• Download the data in Excel to flex

  My flex page has a button to download and when you click on this button, I need to download the data in the data grid to excel. If anyone have clues as to how this can be achieved.
  
  Thanks in advance

  You will find a lot of excel solutions via google.
  Tracy

• Problems to download the PDF using Zscaler in iPad

  Hello

  My problem is that my students are unable to download the PDF download files as a material to put it in a trust. When they click on the possibility to download the PDF of the circle which appears is in the last game, and students are unable to access the assignment to solve. My school uses Zscaler and MDM. We think the problem is the Zscaler, but someone has an idea or a solution?

  Thank you

  Iñaki

  in Spanish....

  Hola,

  tenemos UN serio problema using iTunes U, porque los students ros no pueden descargarse los PDFs y hacer las tasks. Cuando hacen click en the tarea para descargarse el PDF, el Círculo begins a show download pero's paradox al final, finalize the descarga sin is.

  Utilizamos Zscaler y MDM para fieltro y todos los los students iPads manage. Are a serious problem that without amendments already get el Máximo partido an iTunes U y, lo peor todo, los students no pueden access al material y exercise than the economics.

  ¿Alguien tiene como resolverlo, por favor idea?

  Gracias

  Iñaki

  Based on the information published in other threads, your admin Zscaler should whitelist *. Apple.com and *. icloud.com. If this does not work, I recommend that you only contact AppleCare for Apple whitelist recommendations.

• delete the data using the slider to tape

  Hello

  I have some log files that I need to deal with. For some of these files, I'll have to remove the beginning and the end of them. For this I intend to draw the newspaper and set of 2 sliders, and then the user move the sliders in a way that he would leave the unwanted data out of the band and then it would be a button to continue to delete the unwanted data of all channels within the group.

  So far I traced the data and set the band using the following script:

  view. ActiveSheet.Cursor.Type = "band".

  view. ActiveSheet.Cursor.Mode = "graphPoints".

  view. ActiveSheet.Cursor.X1 = CMin ("Y_Accel") + 0.25 * (CMax("Y_Accel")-CMin("Y_Accel"))

  view. ActiveSheet.Cursor.X2 = CMin ("Y_Accel") + 0.75 * (CMax("Y_Accel")-CMin("Y_Accel"))

  Now, I would use the positions where the sliders have been moved by the user to remove data but I don't know how to read the position of the cursor. With it, I would use a function like DataBlDel or similar.

  Does anyone have an idea how to do that?

  I'm just starting with DIAdem so if anyone found out that there is an easier way to do it please let me know.

  Thank you

  Leo

  Hi Leo,

  If you're just starting with DIAdem and scripts then the following article is a great resource. It examines interactions between users and the cursor data.

  DIAdem - using scripts to run the dialog box file, intervention by the user, using the data of frame slider and good even more!

  https://decibel.NI.com/content/docs/doc-5771

  Good reading and let me know if you have any questions.

  Best regards

  Chris

• How can I change the data used by a graph of a waveform depending on which tab is active?

  Hello

  First of all, I want to say thank you in advance!  Let me describe the situation a bit.  My front panel VI (see attachment) has a tab control and on each tab of the window, I have a graph of intensity with a free drag cursor.  On the tab control window that I try to display the row or column of data where the cursor is, I can do this for each in the intensity chart individually.  I'm trying to clean up the block diagram a bit and instead of using 4 waveform graphs, I want to use one, can the data that is displayed in the graph of the waveform are associated with which page is active in the tab control.  Is this possible?  And how can I do?

  Thank you once again,

  ~ Daniel DeWitte

  Thread just the terminal tab to a case structure, switching data going graphic terminal

  (Sorry, message by phone, can not look at your code...)

• Problem to adjust the data using the algorithm of lev - mar...

  Hello

  I'm a casual user of LV, and I need signal level using a non-linear custom model. The signal is basically a decay of exp (order 1) with a continuous component, so it's pretty simple.

  When I apply the routine of Lev - Mar's non-linear editing, I've always had the famous "an exception has occurred in externally called by a function of the call library node. This could have corrupted memory of LabView. Save any work., etc.. VIwas stopped to node "" a call to "NI_AALPro.lvlib: Real - Decomposition.vi of SWINE vesicular disease.

  The thing is I've already adapted successfully some basic (linear model) data using this form of Lev - Mar non-linear... but it won't work this time... and I don't see why.

  Could you watch my VI and model definition and tell me what I need to improve, and what might cause the problem? The main VI (TPV_Fit_ExpDec1_v1.0.vi) open a text file that contains my data (3 columns: time, a pulse (not useful for editing), the signal to fit). At the beginning, I isolate the part of the signal that matches t > = 0, because it is where begins the exponential decay. So I want just to get the part. I join the main VI, a txt file containing typical data, and made the VI that define the model to the lev-mark function.

  I would appreciate your help and suggestions!

  Thank you very much in advance.

  MY VERSION of LABVIEW is the 8.2

  JB

  Here's a quick rewrite. You should ALWAYS figure the curve for the initial parameter estimates see if they are in the ballpark. Rather than modify the data, you could just put the weight to zero for negatvie x. see if it works better.

  

• Unable to retrieve the data using self join

  I'm trying to find the time required to close a ticket. The ticket goes through different stages: NEW, INPROCESS, CLOSED, REOPENED. If the ticket is reopened so the next step would be INPROCESS and then CLOSED.

  The CC_TICKET_INFO table contains information on the last step of the ticket. Table CC_TICKET_HISTORY contains information on every step of the ticket.

  The challenge here is that if the ticket is reopened so it should be considered as 2 instances instead of 1.

  Trial of stages: NEW-INPROCESS-> CLOSE >

  Second instance of stages: REOPEND -> INPROCESS-> CLOSE.

  Following SQL is to generate the data:

  CREATE TABLE CC_TICKET_INFO

  (

  TICKET_ID VARCHAR2 (20 BYTE) NOT NULL

  TICKET_STATUS VARCHAR2 (60 BYTE)

  , created_date timestamp (6)

  , LAST_CHANGED timestamp (6)

  , ASSIGNED_TO VARCHAR2 (20)

  CONSTRAINT PK_CC_TICKET_INFO PRIMARY KEY

  (

  ticket_id

  )

  )

  CREATE TABLE CC_TICKET_HISTORY

  (

  TICKET_ID VARCHAR2 (20 BYTE) NOT NULL

  TICKET_STATUS VARCHAR2 (60 BYTE)

  , CREATED_DATE TIMESTAMP (6) NOT NULL

  ASSIGNED_TO VARCHAR2 (255 BYTE)

  CREATED_BY VARCHAR2 (60 BYTE)

  CONSTRAINT PK_CC_TICKET_HISTORY PRIMARY KEY

  (

  TICKET_ID

  CREATED_DATE

  )

  )

  insert into cc_ticket_history values ('D21207155', 'NEW', 6/28/2013-17:28:59 ', null, 'jsg - st');

  insert into cc_ticket_history values ('D21207155', 'INPROCESS', 6/28/2013-17:48:19 ', 'ah-eg","ah-eg");

  insert into cc_ticket_history values ('D21207155', 'CLOSED', 6/28/2013 18:54:23 ', 'ah-eg","ah-eg");

  insert into cc_ticket_history values ('D21207155', 'REOPENED', 7/2/2013 19:55:04 ', 'ah-eg","jsg - st");

  insert into cc_ticket_history values ('D21207155', 'INPROCESS', 7/2/2013 20:11:17 ', "sr - eg", "sr - eg");

  insert into cc_ticket_history values ('D21207155', 'CLOSED', 7/2/2013 23:06:16 ', "sr - eg", "sr - eg");

  insert into CC_TICKET_INFO values ('D21207155', 'CLOSED', 6/28/2013-17:28:59 ', ' 02/07/2013-23:06:16 ', "sr - eg");

  ______________________________________________________________________

  I want to find the time difference between 6/28/2013 18:54:23 'and 6/28/2013-17:28:59 ' (first instance)

  and between 23:06:16 7/2/2013 ' and 7/2/2013 19:55:04 "(second instance)

  Is the closest, I make the through this query:

  Select L.ticket_id, L.CREATED_DATE, R.CREATED_DATE as close_date, L.TICKET_STATUS, R.TICKET_STATUS cc_ticket_history cc_ticket_history join RIGHT L R on (L.rowid < R.rowid) where (L.TICKET_STATUS = 'NEW' R.TICKET_STATUS AND 'CLOSED' =) OR (L.TICKET_STATUS = 'REOPENED' AND R.TICKET_STATUS = 'CLOSED');

  Can it be done through SQL?

  Hello

  ORA - aff wrote:

  Etbin thanks for the reply. I think you're closer!

  The first 3 orders insert above form the first instance. The second 3 inserts statements form the second instance.

  Ideally, I'd like the output to something like this (values taken by top of insert statements):

  Ticket_ID STATUS CREATED_DATE CLOSED_DATE TIME_DIFFERENCE

  D21207155 CLOSED ON 28/06/2013 17:28:59 6/28/2013 18:54:23

  D21207155 CLOSED ON 07/02/2013 19:55:04 07/02/2013 23:06:16

  You can do this by using the analytical LAST_VALUE function:

  WITH got_opened_date AS

  (

  SELECT ticket_id, ticket_status, created_date

  LAST_VALUE (CASE

  WHEN ticket_status IN ('NEW', 'REOPENED')

  THEN created_date

  END

  IGNORES NULL VALUES

  ) OVER (PARTITION BY ticket_id

  ORDER BY created_date

  ) AS opened_date

  OF cc_ticket_history

  )

  SELECT ticket_id

  ticket_status AS status

  opened_date AS created_date

  created_date AS closed_date

  NULL AS time_difference

  OF got_opened_date

  WHERE ticket_status = 'CLOSED '.

  ORDER BY ticket_id

  closed_date

  ;

• Impossible to download the Document using the service GET_FILE

  Hello
  I have a personalized service of custom component called from a workflow, which downloads the file in an external file whenever a recording is made with the parameters corresponding to the criteria of the workflow.
  Now the question is whenever the file is checked for the first time, the file that is downloaded only the information linking with the status message as:
  "StatusMessage = failed to download"ABC022257". Cannot find the latest revision for the element "ABC022257". »
  Can someone indicate probable causes?

  For those who might need this, we discovered this thread actually consists of two questions:

  #1-comment call a sub-service from a service
  #2-Comment get the results of calling the function GET_FILE

  Regarding the #1, this issue has been discussed in this thread: [best practices] how to call a custom Java code service (note that the solution has been achieved by decompiling the order of idocScript of executeService )

  As for #2, I happened to find http://docs.oracle.com/cd/E28280_01/doc.1111/e11011/core.htm#CSSRG2319 which States that "this service call the sub-service GET_FILE, called using Java code for method intradoc.server.FormHandler.retrieveHtmlFormState ().", even once, I decompiled this class. ""

  The end result may look like

    public void downloadDocument() throws DataException, ServiceException {
  
      SystemUtils.trace("system", "downloadDocumentInWorkflow starting");
      String dID = m_binder.getLocal("dID");
      String contentID = m_binder.getLocal("dDocName");
      String serviceName = "GET_FILE";
      String userName = m_binder.getLocal("dUser");
  
      SystemUtils.trace("system", "dID-->" + dID);
      SystemUtils.trace("system", "contentID-->" + contentID);
      SystemUtils.trace("system", "User:" + userName);
  
      DataBinder serviceBinder = new DataBinder();
  
      serviceBinder.putLocal("dID", dID);
      serviceBinder.putLocal("dDocName", contentID);
      serviceBinder.putLocal("IdcService", serviceName);
      Workspace workspace = getSystemWorkspace();
  
      try {
        SystemUtils.trace("system", "started");
        ServiceData serviceData = ServiceManager.getFullService(serviceName);
        workspace = getSystemWorkspace();
        Service service =
          ServiceManager.createService(serviceData.m_classID, workspace, null,
                                       serviceBinder, serviceData);
        UserData fullUserData = getUserData();
        service.setUserData(fullUserData);
        serviceBinder.m_environment.put("REMOTE_USER", userName);
        service.initDelegatedObjects();
        service.executeSafeServiceInNewContext(serviceName, true);
        SystemUtils.trace("system", "succeeded");
        String path = (String)service.getCachedObject("PrimaryFilePath");
        SystemUtils.trace("system", "Path-->" + path);
      } catch (Exception e) {
        SystemUtils.trace("system", "failed");
      }
  
    }
  

  Note that this code has been tested in a system where the documents are stored on the file system and the returned parameter contains the full path to the directory of the vault.

• Cannot set the focus when reset the data using data sets

  Hi all

  When I click Reset button of the form. I would like to reset the data and then to focus on the first field. I can delete the information I've provided but setFocus in the name of the first field does not work. Help, please.

  I use datasets to reset data.

  Here is my code:
  event: click on

  xfa.datasets.data.loadXML ("< form1 / >", true, true);

  xfa.host.setFocus ("xfa.form1.contactInformation.firstname")

  Thank you

  Cindy

  Put the setfocus on the form event: loan of form1

• Loading of the data using the ODI Crores

  Hi Experts,
  
  I'm loading data 16.5 crores from source to target with in the only Oracle DB (for source and target Ihave two different schemas) and the target tablespace have 180 GB, whereas I am running using the ODI interface, found the extension tablespace TEMPerror. but I did not have enough space to increase the TEMp tablespace in my PB.
  Please help me any other solution to solve the same.
  
  Thank you in advance,
  
  Kind regards
  Chaitanya.

  Hi Chaitanya,

  Please add separate column (column sequence number) in the source table and retrieve the data with the sequence number and apply the index on the sequence column.
  Add the filter to the sequence column condition in interface and run the interface in order to transmit the data between the source and target wise bouquet

  for example: Add the command to the filter condition and transmit values like below

  Command: sequnce_column_name between 1 and 100000

  sequnce_column_name later between 100001 and 1000000 next sequnce_column_name between 1000001 and 10000000

  Continue to run based on the calculation of your previous run time

  It will be the word incase there no column of date as lupdated_date, created_date, created_by and updated_by

  Kind regards
  Phanikanth