Download vi on arduino

Similar Questions

• All the default values of control programmatically (arduino distribution)

  So I know this has been discussed before, but I have a unique situation.  I will download code to Arduinos using Labview for Arduino toolkit compiler.  I want to programmatically set some default control values on each Arduino using a Labview GUI.  The Arduino kit that I use has a VI of compilation which takes a VI, it compiles, and then it downloads to the Arduino.  How can I change the default value for controls of the VI before he compiled and downloaded?

  Have you tried to use nodes property to set values and nodes of the method of "current default" and save the VI then?

  

• labVIEW Arduino interface

  Hey,.

  I've interfaced arduino and labVIEW 2012. I run the LIFA_Base file in the window of the arduino and then close it and run my program in labVIEW. whenever I have stop the labVIEW program and the next time I run the program in labVIEW, that it's not until I reupload the LIFA firmware. So, what is the solution such that I did not download the LIFA firmware every time.

  Good quick response.

  Rich.

  Rich,

  I think your code is good enough to read the data in series.

  Please check the attached sketch (which is the same as what you have downloaded to the arduino) also I join the LabVIEW VI to read data series.

  Please make sure that the COM port that you use for arduino should be the same for LabVIEW.

  Also close to the arduino.exe (the software through which you have downloaded the sketch.

  Then, run the supplied LabVIEW VI.

  Better use of the arduino with LabVIEW, you can find step by step here information

• Bluetooth SPP very slow on the macbook 13 retina early 2015

  I use the Bluetooth SPP profile much download code the arduino-based robots in my classes. This used to work fine on a Macbook (13-inch late 2011) unibody + Yosemite, but since I have upgraded to a Macbook 13 beginning 2015 retina, transfers are > 20 x slower with Bluetooth Explorer showing many broadcasts, although the RSSI is very high, and both devices are close together.

  I have already filed a bug report to bugreport.apple.com (15 days ago), still no response whatsoever.

  It happens to someone else? That is to say is - this just my computer that is faulty? It would also be useful if the computer even with an older version of OS X (Yosemite) working for someone else.

  This is a screenshot of a transmission with the internal Bluetooth adapter to 115200 bps. Transfer rate should be, well... aound 11520 bytes/s. I get 550 B/s instead, a LOT of broadcasts:

  

  And an another screenshot using an external USB bluetooth adapter (noname brand) (~ 12 Kbps good speed and 0% retrasmissions).

  

  TL; DR: Flow slow Bluetooth SPP has been fixed in 10.11.4.

  Answer...

  I reported this through http://bugreport.apple.com/ jan-9, then the mar - 21, I was warned that the next version should fix. The same day, I upgraded to 10.11.4 and it is indeed fixed. I get normal speeds (12 KB/s for a 115,2 Kbps link), see screenshot.

  After a few months, I thought that this would never get the attention of Apple. Then... Thank you very much!!!

  

• "Launch4j" error message when you try to download the Arduino Uno start-up program

  I successfully downloaded and used this program in the recent past, using Windows 8, but even if I can download it now, when I try to open it on the desktop, I get the message: error "Launch4j. I'm not a computer specialist and have not been able to get much help from the local computer providers, but I have a feeling that there must be a simple solution.

  Any ideas would be very useful.

  Colin.

  Hi Colin,

  Right-click on the application and select run as administrator, and then check if it works. If this does not help, reinstall the application in compatibility mode.

  Refer to this link: make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Also check out this link:

  http://Forum.Arduino.cc/index.php?topic=210854.0

  Contact the Arduino support and see if they can help you.

• Can we run a LabVIEW VI and downloaded at the same time on Arduino code map Arduino?

  If we use LabVIEW to write data in series to an Arduino, can send us on the Arduino code before you run the VI so that the Arduino has something to do with the signals it receives from LabVIEW? Specifically, we want to use the digital IO pins to read into a signal on the Arduino (provided in series by LabVIEW) and do something with the signals as a LED lights up. Is that what most people do?

  Our project includes a parking meter and we want to use the Arduino by itself, but first we want to simulate the code using some signals that we want to move through LabVIEW. Basically, the meter said the Arduino, if they are paid, and if there is five minutes or less remaining on time. Based on this information and data from a PING sensor, we will determine which exit to turn off (a flashing LED to different frequencies to designate two different messages).

  Sorry if my question is not clear or if it is trivial; my partners and I are very new to LabVIEW and the Arduino, and we try to get this working soon.

  The LabView VI Arduino library is designed to work with the Arduino as a USB DAQ/DIO.

  This isn't really what you're after...

  I don't really know how LabView would be useful in this project.

• Reading/Controlling Arduino with iPhone Dashboard

  Hello

  I'm new using Dashboard OR so please bear with me.

  I'm working on the installer is a TCP/IP connection between my computer and an Arduino with WiFi shield. The computer has a VI that connects to the Arduino, currently the Arduino is the server and receives data from sensors that it displays in graphics and medium. VI also adjustable a yellow and Red limits for data from the sensor, and when the latter is reached, a stop test command is sent to the Arduino.

  I am trying to add a smartphone to the current configuration. Initially, I had planned to write an application with a custom telnet but I thought that the dashboard could better work (such as graphics display). I downloaded the dashboard for iPhone but were unable to establish a connection to the Arduino when it is not connected to the computer VI. The connection itself has no effect on the side of the iPhone app shows continually links and nothing else. The only way I know that a connection has been established, it's that the Arduino is defined in the light of an LED only when connected.

  I have three major concerns are:

  1. are there any documents to be able to use the dashboard with iPhone? If not, is the iPhone Dashboard more limited than the dashboard iPad for which there is of the documents? I have not been able to find a lot of documentation for dashboard with iPhone, iPad only (http://www.ni.com/white-paper/13757/en/).

  2. relying on Q1. is it possible to add controls to the iPhone (I have to be able to send a command to stop the phone if the installation should work) of dashboard?

  3 should. the dashboard be connected to a computer running a VI? My original plan to was to directly connect to the Arduino. skip the command stop via the computer, it is doable but diverted.

  Hope to hear from you,
  Yusif Nurizade

  The version of the phone has 'charts', but not 'graphics '. In LabVIEW terminology this means that you can see the latest data and history, but history is stored locally in this table (not the server). You will see that the history of data points that your client has received. In the version of phone we also do support the scalar data types, which means that you can see only one of the data point. Basically, this means that it is not enough for streaming of signals. The dashboard will update the table by adding a single fixed-rate data point (as described here: http://digital.ni.com/public.nsf/allkb/DF058CF63BC25E29862579EB0062E828). No matter what the server made the dash displays only data to the fixed rate, and it will drop all intermediate values arriving between the last update and the next update. It should only be used to see a preview of the last value and certain values passed.

  There are several ways to see the differences between the versions, but perhaps not in the form that you are missing. First of all, this page describes the data types supported for each version:

  http://digital.NI.com/public.nsf/allkb/D9B247551BE7F46A8625795000552CDE

  This page shows the new features available in version 2.x (which is available on the tablets):

  http://www.NI.com/white-paper/14033/en/

  Whatever it is described as a new feature on this page is not available in versions of phone, which are based on the 1.0 version of the application.

  "2. my current setup is Arduino as the server and the client computer. I have to back to allow the phone access to the data on the computer? "You said that theDashboard does not need to delve into TCP/IP at low altitude, so I wonder if there is a way to connect to the VI computer without involving the Arduino or reversal of the client-server relationship.

  I'm assuming that the data that you actually care comes from the Arduino, so at some level, the Arduino could still be considered a server. The concept of client and the server gets a little fuzzier when you introduce an intermediary, i.e. what would be your LabVIEW application. From the point of view of the Arduino the LabVIEW application would be a customer (it connects to the Arduino). From the point of view of the phone the LabVIEW application is the server (the phone connects to it). How your application is connect to the Arduino using its Protocol, acquire all relevant data, convert it to an appropriate data type and publish it in a way that is accessible to the application of data dashboard (i.e. a shared variable or a web service).

• LabVIEW Interface for installation of the Arduino

  I want to install the LabVIEW Interface for Arduino Toolkit, so I can control an Arduino Uno R3.  Say the instructions to download and install the VIPM and then you can download and install the Toolkit through the VIPM.  The only problem is that workplace of our company doesn't have access to the internet for security reasons, so the VIPM will not be able to download the Toolkit.  How can I download manually the Toolbox for a laptop without LabVIEW, save it on a usb key, then install manually on the workstation with LabVIEW?  Any help would be greatly appreciated.

  I asked the very question sometime back and here is the answer I received. I decided to use another computer on the network for the work of the Arduino, so I never tried what was suggested.

  Let us know how it turns out.

• Arduino and LabVIEW makerHub

  Guys I use Arduino UNO and wind sensor. I need to see the wind speed and temperature. I did that with LINX and its proper functioning, my problem now is, quite slow results, can someone help me I need to change my program to work well and produce quick results on the graph of thermometer and waveform. I'm download my block diagram.

  Thank you.

  dony_92 wrote:

  I think that these numeric operators makes things slowly, so is it possible to calculate faster and then I think that the results will be showing much more quickly on the front panel. I need to show every second on the façade on the speed of the wind and temperature. So I hope I explained well what I need.

  Turn OFF, highlight execution (the light bulb in the toolbar).  This is a debugging tool which slows your program to a crawl but you indicates the values that they are run.

• Arduino error 5005

  Hi all

  It is an interesting question.

  LabVIEW does not see the Arduino comport.

  I have LabVIEW student 2011 Edition

  Followed all the instructions and updated the firmware on the Arduino. I don't know why LabVIEW does not see the Compote in the control of resources VISA.

  I can download sketches very well of the Arduino IDE.

  I either get error 5005 or a labview error when I try to fudge the resource and enter it manually because there is no selection for the Compote.

  Any ideas?

  Thank you

  Kamilan

  You have not provided the LabVIEW error and I'm guessing that you did not search for her. Did you install NI-VISA? This is the necessary driver for a serial communication.

• Problems with arduino labview Interface

  I have the labview-arduino interface, but the problems came when I run the program, sometimes it work perfectly, but sometimes (almost all the time), I can not connect this time, the series of programs and do not show any kind of problems, I can see that in the resourse computers two visa, I don't know if it's because she I soppose comunication , but my arduino do not work, and I can use perfectly with the arduino IDE, but not with VISA, I used the Arduino IDE to be shure that works my Arduino board

  so if you know how to solve this problem, please help me!

  Thank you!

  There is no need to host files somewhere else.  Feel free to download on the forums and attach them to your message.

  Minor first comments.  Why are you re-reading your every 2 seconds config file?  Expect you to change?  If it is then played once and not proofread.

  I think it would be better if you stopped when an error occurred, you can do this by wiring to the RO error enter the stop condition, or use the arithmatic composed with gold.

  But I think the main question you have, it's that your Arduino reference may be whipped out if you do the wrong things.  If your equal comparison is false, you go to the wrong case, where you are not passing the arduino reference.  So when you go to close you don't close your reference and your equipment will always be open, and you try to run again will result in an error.  For even if your loop runs for 0 iterations your reference is lost.  An updated version, which has some of these changes is attached.

• Arduino uno error 5002

  Hey,.

  I'm using labview 2011, lifa 2.2.079, arduino uno rev3 connected via usb to the pc

  If I open Device Manager I find under ports: arduino uno (com3)

  also if I open or max, devices and interfaces in series and parallel I find com3 when I click it I find in the device status area: this device does not work correctly

  I also checked my Arduino board using the arduino software, I tried to download the example of Flash and it works if this isn't a hardware problem

  but when I am trying to build all vi (I tried one which turn on and off the led to pin 13) or by using any instance in the for example the analog player lifa vi I get error 5002 and nothing works...

  I checked baud rate and I tried to increase the timeouts and I created a constant for VISA resource choose com3 in the init.vi (all these are solutions found in other discussions here in the forum) and nothing worked I still get the error

  can someone help me in this?

  Thank you very much

  Download the 1.0.5.then from the arduino between software software, click on file > open... > c hard drivefor example) > program files > instruments > labview > vi.lib > labview national interface for arduino > firmware > lifa_base > lifa_base. then download the file on your chip, close the software, enter labview and run your vi It should work. If you do not understand, you can follow the steps mentioned in a youtube video... Enter youtube.com > labview arduino... Watch the first video that appears.

• Download LIFA_Base error

  Hello

  I work with arduino for the first time and I came across a problem on the very first steps. I connect my arduino mega 2560 with my pc. I checked max NOR and it shows in the devices section. Then, I open the LIFA_Base.ino file located in c:\program files\... In its opening, I checked that the right way in series and the Board that I use has been selected. Then I tried to download LIFA_Base to the arduino, but here it's going wrong.

  When the download begins, he says "busy compiling sketches" and after a second or two, he said: "the problem with the compilation. I think I made all the correct steps according to instructional videos, I saw.

  Y at - there someone who can help me with this problem?

  Kind regards

  Ruts

  Problem is solved. I just had to update my software v1.0.3 for v1.0.5 arduino

• Transfer of files of arduino for Labview

  Hey.

  I do my b.a. in Labview using an Arduino 2560. The arduino controls a temperature probe, with 16 pixels.
  I made the connection with the microcontroller of the sensor, using I2C - bus. Arduino MI send via USB as a package of 16 bytes, that contains the temperature measurement.
  I have a problem with how I should read the transfer of files in Labview string text to table.

  I downloaded the Labview interface for arduino and have connection with Labview and arduino.

  I have searched the Labview interface for arduino modules but can't seam to find a drive bytes.

  The end result would be a graph of intensity which show temperature mearsurement.

  https://decibel.NI.com/content/groups/LabVIEW-interface-for-Arduino

• How to use a Timer and an event with LIFA/Arduino

  Hello world

  I feel that my question is going to sound really stupid, but I can't find the solution. I want to use my arduino to do two tasks at the same time. I want to use a while loop with a timer, read my pins in my arduino. It's really easy. But then, I like to use as a case of event do different type of things. In the example, I downloaded, I just use an event to activate my fan. Again, I have no problem to use it by itself. But I can't find a way to use both at the same time, especially when I want out of my application. Because I use my arduino inside my event, I put it in an another while loop. But I want also an another while loop, but uses the clock. In my example, if you use the tool to highlight run, see you clearly that my signal goes the while loop that contains the case of the event, but not other things that I want to use it as a timer. That's probably because I missed something on the architecture, it's just to give you an idea. I just want to know what is the smartest way to combine my case of the event and my time in a loop using the timer and how to close them correctly. I'm not an expert in Labview, so it is a bit difficult for me. If my comments seems obscure, I'll answer all your questions without any problem.

  I thank very you much for your help and attention.

  FrenchLizard wrote:

  If you use the tool to highlight execution, you can clearly see that my signal goes the while loop that contains the occurrence, but not others

  Because of the LabVIEW data flow model: value of stop button is connected to the first loop for the second loop. You can see "How to stop several loops using the only button" then you can use any implementation. http://digital.NI.com/public.nsf/allkb/267704CDE91156D186256F6D00711AAE