Download Windows 8.1 LaserJet 3330 MFP software

Similar Questions

• Question of LaserJet M1319f MFP Installation on Windows 7

  Dear HP team and community members to support,

  I am currently trying to install HP LaserJet M1319f MFP connected via USB on Lenovo Q190 machine /Intel Core i3 processor / freshly installed running Windows 7 Enterprise 64-bit with Bulgarian language pack, all updates, Microsoft Forefront Protection/i also tried to disable the real-time protection /, UAC disabled, account administrator, IE 11, .NET Framework 4.5.1.

  The priter work properly with Windows XP.

  I downloaded the package of driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=bg&dlc=en&sw_lang=&product=3547...

  After reached installation process 'Copy of the files on the hard disk' stage Setup returns error software install printer no longer works.

  I tried to run with Windows XP SP3 compatibility mode or administrator privileges, but the same error occurs.

  I tried Microsoft Fix It software to install/uninstall drivers too, but without success either.

  I cleaned up the temporary files and Max about 10 to 15 times.

  Windows update is not help with drivers too.

  I tried to extract the Installer files and manually add the printer and received the error that the installation was not successful and it says below the file is not found / if I remember it well.

  After that I tried the HP Print and Scan Doctor software, but it shows that there is no driver installed and redirect me to the driver download page.

  I tried the Assistant driver software also, but it returns that this model is not supported.

  I tried to change the Startup Windows "Selective startup" with "Load Startup items" unchecked and all non-microsoft disabled services, but without success.

  Under safe mode that will not accomplish the install because the print spooler service does not, which is running normally otherwise.

  The "ntprint.inf" file is present in the folder 'Windows\inf', HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x 86 registry has only subkeys drivers and print processors and the HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors registry has only Local Port, Microsoft Shared Fax Monitor, monitor the Standard TCP/IP Port, USB and WSD port subkeys.

  The Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 folders are empty.

  I ran sfc/scannow in cmd with administrator privileges, but there was no violation of integrity.

  I tried to disable the IE component, but no luck either.

  So now I'm out of ideas how to connect that * bleep * thing... I hope someone can help me with this problem.

  "Hewlett PackardHP LaserJet M1319f MFP" currently devices without driver installed in Device Manager /Hardware ID USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/ and Scanning HP /hardware ID USB\VID_03F0 & PID_5817 & REV_0100 & MI_00 and USB\VID_03F0 & PID_5817 & MI_00.

  I forgot to mention that I tried all kinds of variations with these solutions with or without connected printer.

  Thank you very much in advance for all type of guidelines.

  Best regards

  Ivan

  P.S.: at least, I think that I managed to collect all related solutions in this topic...

  Dear Gemini02,

  After a few days of trying different types of solutions, I finally managed to install the printer as a network device.

  So basically, I also had a problem (error 0 x 002) with the installation of the printer as a network printer. Restart the Printer Spooler service has not worked and erase cache files did not work either.

  So I installed x 64 driver on the host machine and then installed the network printer. For those who do not know how to install x 64 drivers:

  -Download the drivers from the official HP support page

  -Check out the *.exe file in a folder (if you don't have additional archiving program replace *.exe with cover and unzip it with the build Manager). Navigate to the folder 'x 64' and extract the file "LJM1319L.cab" to separate the folder.

  -Go to 'Printers and faxes' ("devices and printers" in Windows 7 ")

  -Then right click on the shared printer already and click on 'Properties' ("printer properties" Windows 7 ")

  -Click the 'sharing' tab and click on "additional drivers".

  -Select 'x 64' or only ' IA64"in the case that your hardware architecture is demanding and click 'Apply'.

  If you have already installed the drivers, the rest is not relevant, but if you do not:

  -Open the extracted folder and select the file "HP1319fp.ini" (if it returns select error 'HPM1319.ini')

  -When he asked the second time pilot open 'x 64-> LJM1319L' and select the *.dll file

  -on the third request for drivers go to 'x 64 English-> PrntDriver' and select 'ZSD1319P'.

  I couldn't try to connect and install by USB (the office that I am taking care, as if it were new post more), but after the successful installation of the drivers that the printer connected locally should also work perfectly.

  So I hope I was help someone like me about this and still do not understand why I should have done everything for installation driver simple?

  Best regards

  Ivan

• Windows Vista Ultimate Edition with HP Color LaserJet CM1015 MFP

  I'm running Windows Vista Ultimate, the computer was bought in 2008, 32-bit.  I also use HP Color LaserJet CM1015 MFP - about once a year, I have a major problem with the scan software & Windows Vista.  Both machines are in good working condition.  This time, I actually uninstalled the HP software and bought a new CD from HP specfically for Vista and installed the Vista software for the HP mfp - however, the scan option does not appear in the center of HP solutions as a button.  This is a feature I've always used.  What is the HP Solution Center is the scanner is not installed - although in the installed software.  Last night, I downloaded a patch and that did not correct the problem.  In addition, the HP LaserJet CM 1015 is in 'scanners and cameras' in the Panel configuration, but not in the HP Solution Center...

  Hello

  1. your printer work?

  Try to find the drivers scanner HP, if that does not work then I suggest you contact the hardware manufacturer.

• [Solved] Only software of HP Laserjet 1536dnf MFP

  [EDIT] The problem is resolved. My uncle asked someone to solve the problem. It has removed a plus printer related additional file. Unfortunately, I don't have the name. After that, that he has downloaded all-in-one file and printer correctly installed. Sorry for the inconvenience.

  Hello

  My uncle has Win 7 Ultimate, 64-bit (updated to the latest windows updates)

  installed via bootcamp on iMac

  HP 1536dnf MFP printer be installed via USB. No other HP product is installed.

  I had problems I've managed to solve.

  Problems:

  Earlier, the window 'Properties' flashed and closed immediately. I couldn't solve the problem even after trying the solutions offered in the messages earlier. After installation, my installer would fail as he won 99%. Even if I killed the install via the Task Manager, still I could not find a solution. HP toolbox FX could not be installed.

  As usual, I removed all the HP driver enteries of

  • services tab,
  • Device Manager and
  • somewhere in "printers and devices" (afte rclicking / select any printer on the top bar, there is an option to select the driver).
  • I also removed HP record form "programs x 86"(mon système est en 64bits). "» In the folder programs, I found nothing.
  • I also checked for universal printer is uninstalled and
  • sprooler printing works and is set to automatic.

  I had also updated the firmware to the latest version of 2014.

  1536dnf always failed Windows Update.

  I run the latest al-one installer of HP (210 MB)

  All-in-one installer...

  With the windows installer install also installs software. I clicked on the taskbar icon to see the details. He seeks the latest scan drivers, printing, etc. on the net and then installs it.

  After the installer HP 26 to 29%, seeks 1536 printer driver (we see on the screen to install windows). When the installation program has reached 29%, it is said

  Failed installation. Messege is something like

  Installation of HP Laserjet 1536dnf failure.

  I kept the installer running. After reaching 99%, it crashes. After a few minutes, it shows a fatal error. I ended up installing through the conversation Manager, the software is still not install.

  HP diagnostic tool identifies the printer, but said, software is not installed and indicates the downloads page, which is not the MFP from HP 1536dnf.

  There is a solution, I've not tried. A post said to create a new user.

  Half of the Solution:

  Then I tried to print base settings and scan driver PCL 6 without the first installation of software (which is later available on the version of the site 2011 HP) and... it worked. Now I can print and open for the tab of properties of the he.

  Note also that this is a "universal Printer driver'--> all suggested this universal printer and cause print spooler problems

  It works very well, but without the software that I can't scan. I do not use photoshop.

  Question:

  My question is

  210 mb Setup will still install the drivers. What will happen as in this case, I have already installed the drivers and work fine, but as mentioned, I can't scan. Scanning software HP gives good options.

  Is there a version available where only the software is installed and no driver is installed.

  Since 210 mb all-in-one installer always hangs at 99% (downloaded 2 times and installed 7 - 8 times), I might try basic installer.

  What will happen to the pre-installed drivers?

  The problem is that driver a universal printer PCL 6

  I will again be my uncle on Saturday.

  Please help me. Thank you.

  Kind regards

  White Lotus (WL)

  [EDIT] The problem is resolved. My uncle asked someone to solve the problem. It has removed a plus printer related additional file. Unfortunately, I don't have the name. After that, that he has downloaded all-in-one file and printer correctly installed. Sorry for the inconvenience.

• HP Color LaserJet CM1015 MFP: LaserJet CM1015 scanner does not work in Windows 10 (64-bit)

  I up graded to Windows (64-bit) 10 now the scanner on my HP Color LaserJet CM1015 MFP does not. I installed HP Universal print drivers, but apparently there is no include scanner drivers. Anyone know where I can get the drivers scanner?

  Thank you

  N ° 7

  Hi Lou,

  Basic scanning drivers built into the operating system only allow scan however a USB key.

  You can follow these steps to install the previous HP software by using compatibility mode:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03506225

  Vista drivers can be obtained directly from the following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1846081&swItemId=ly_51851_1&swEnvOid=2100

• HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

  I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far.

  The scan function has stopped working. Here are the steps and errors that I see:
  1. I load the sheet from which I scanned in the printer and the printer displays
  2. I start Windows Fax and Scan dialog box and press the button new scanning
  3. New Scan, dialog and I press the Scan button
  4. the printer begins to feed the sheet and displays
  5. immediately after the message that the printer displays the message
  6. a message with the dialog box titled error, and after I press OK another dialog box with Windows Fax and Scan title pop-up.
  I did the following steps to try to fix the scan:
  1 uninstalled the printer and it added. Scan still does not work.
  2. I downloaded the latest driver and firmware on HP site updates and installed on the PC and on the printer firmware. I had success on the driver and firmware of the facilities. Scan still does not work.
  3. I ran PC-Doctor hardware diagnostics on the printing device and got a status of success. The Test page printed successfully.
  4. I am able to print documents, but will not scan. I tried both ways - single and multiple - sheets. Scan still does not work.
  Any suggestion would be appreciated.

  Hi ApolloWZ,

  Thanks for your quick response.

  In the meantime, I found the solution to my problem, so I thought I'd share it here for others.

  I found the answer here:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/can-t-scan-from-M1536dnf-after-reformatting-computers/TD-p/3914820

  I will cut & paste the answer below, in which case the link above doesn't work at some point:

  (1) on the computer target under the normal user account, press Start, in the search box type services.msc. Right click on the program that appears and select "Run as Administrator". Enter your user password or click on next to go to the UAC popup, if necessary.
  (2) locate the service called "Windows Image Acquisition (WIA)" and double-click it.
  3) click the connection tab, and then change this service to log on under a Local System account. Click here to allow the service to interact with desktop. And then click OK.
  (4) reboot (or if you really don't want to restart & know what you're doing, you can just stop & restart the WIA service twice)

  See you soon,.

  Gary.

• Cannot download the software because the entry in the downloads window says "canceled."

  Internet access: Juno dial-up. Browser: Firefox 18.0.2. OS: Windows XP Pro. No antivirus program. I could not download the software of three websites. When the Firefox downloads window opens, it lists the file I want to download, but under this file is called a message that reads, "cancelled - (name of the Web site)." What can cause a download to be cancelled? How can I avoid this and get the download?
  The software which I have been unable to download is: Adobe.com: Acrobat Reader and Flash Player. of kodak.com: the software in support of my camera Kodak digital photo; of mozilla.org: Thunderbird. If I followed the instructions from Adobe and double-click the file name in the window of downloads, the download product, but it seems to be a travesty of download. When it's over, nothing more, and when I search the entire hard drive for the file to be downloaded, it is not found. The data seem to have simply disappeared. I took two screenshots of a cancelled Thunderbird download, but I do not see how to reach this question.

  Click on this link

  • support.mozilla.org/en-US/kb/cant-download-or-save-files
  • kb.mozillazine.org/Unable_to_save_or_download_files

• Driver for HP LaserJet M1005 MFP for Windows 7

  Could not find driver for HP LaserJet M1005 MFP for Windows 7 please help soon

  @jayadurgacranes

  This product is supported by a plug-and-play printing and scanning to the driver which can be found here:

  product page M1005

• Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

  Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

  I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

  I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

  Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

  1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

  2. Please look in Applications-> utilities-> Console logs for error messages.

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• Device driver missing software for Laserjet M1120 MFP printer

  Hello

  I would like to tolocate and install software of the mising for my Laserjet M1120 MFP driver device.

  Any help would greatly be appreciaited.

  J

  MartianLizard wrote:

  Hello

  I would like to tolocate and install software of the mising for my Laserjet M1120 MFP driver device.

  Any help would greatly be appreciaited.

  J

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3447598

• Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions?

  Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions? It seems that microsoft Web sites send me in circles. Patches do not work either.

  Hello
   
  1. What is the error code / message that displayed when you try to install updates for your Windows Xp Service pack 2 computer?
   
  2. What are the steps of troubleshooting that you already tried?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Steps to take before you install Windows XP Service Pack 3
   
  http://support.Microsoft.com/kb/950717
   
  Step 2
   
  Cannot install Windows updates
   
  http://support.Microsoft.com/kb/555461
   
  see, http://support.microsoft.com/kb/906602
   
  Method 2
   
  If you still face problems, please start your computer in a clean boot to avoid conflicts with security and third-party software conflicts and try to install updates.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  I hope this helps.

• My computer has been infected with a virus by asking me to download windows xp for $59 virus software.

  original title: anti-spyware in Microsoft windows xp

  My computer has been infected with a virus by asking me to download windows xp for $59 virus software. Whenever I tried to load the antivirus software, or similar, I saw in the 'my windows task manager process windows' image or start whd.exe process name my software would be closed and a screen could come that had microsoft images etc on this subject. He asked me to sign up or enter my code', that I could download for $59. I managed to fix it myself, but before I did I sent an email to their 'support center' telling them that I was going to find and to make their visit for wasting my time! I put a contactable email address down and got one got a naughty response. Hello sorry, but there is no payments with your email. Please send me your e-mail to registration or transaction ID thank you and have a great day! email address * address email is removed from the privacy * who can I send this on, it was a scam and for someone who has no idea about computers, they would have to pay somethig to someone to fix it. enough of these people, they need to be stopped.

  Its fake. Follow this. It may be similar to the following

• I installed Windows Vista Premium, what update of software operation or the command to download Microsoft Office

  I'm looking to download and install Microsoft Office 2010.  My operating system is Vista Premium.  Attempt Office 2010 download, I get a message that the software will not download because I need different software Windows operating.   Do I need to buy a new software operating system; So then what?  Or is there a method to allow the download and usage of Office 2010 with Vista Premium?

  On Saturday, February 18, 2012 21:53:59 + 0000, GeraldEphault wrote:

  I'm looking to download and install Microsoft Office 2010.  My operating system is Vista Premium.  Attempt Office 2010 download, I get a message that the software will not download because I need different software Windows operating.   Do I need to buy a new software operating system; So then what?  Or is there a method to allow the download and usage of Office 2010 with Vista Premium?

  There is no problem with Office 2010 Windows Vista. The only one
  possible incompatibility, I can think is that you have 32-bit
  Windows Vista and you try to put Office 64 bit on it.
  Ken Blake, Microsoft MVP

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.