Download with the password problem
I have a mac air. I try to download adobe reader.
the Downloader opens a window of security with my name and asks for my password. I have the password but not accept it.
When I login I use the same password and works well.
can you help me?
Download Drive does not have any password.
Installation Reader can ask your system administrator password.
Tags: Acrobat
Similar Questions
-
Email with the password problem
I get an error message when I send emails. I get them, but I get a message that my "SMTP.me.com" refuse my password. How can I fix?
If I were you, I would like to disconnect iCloud, then reconnect.
-
I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS. SYSTEM HAULT CODE IS; CNU9243TDY
I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS.
SYSTEM HAULT CODE IS; CNU9243TDY
ways to help
Hello
Try to enter: e9lo7vfati (3rd character is a lowercase L)
Kind regards
DP - K
-
I tried to log in with the password that I had for years and now it says its wrong. I have reset the password without the disc? I am trying to renew new internet protection and it wont let me because I need to approve it.
Thank you
If you want to tell your Windows 7 user password, see guide to recovering lost passwords or other defects preventing log on Windows 7 Home Premium
-
I continue to receive Norton Security reports that a download with the pre RadioWMPCoreGecko fix. followed by various suffixes like dll '19.dll' or 05.Marco, 06 08 etc... takes a lot of computer resources. Can you explain what it is, as I understand it, it is called by Firefox.
This DLL can be part of a Firefox extension.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Change password with the password token does not work
My mother lost her password. So, we asked an e-mail with a password token and clicked on the link in the mail. Responses from the site sorry this token of password is not recognized, please try retyping or get password another token. Then we have copied and pasted the token giving the same result.
We did this three days after another. So every day we ask you an email with a password token, and every day the site said us sorry this token of password is not recognized, please try retyping or get password another token.
The system of resetting password with a token does not, at least not in the Netherlands. Does anyone have an idea how to solve this problem?
Sorry, but the mentioned page asks you to connect with your name Skype and password, so that we cannot further. My mother has a balance of Skype credit that she doesn't use anymore.
What is the problem with the password reset procedure?
OK, after a very good conversation with Cherry B we discovered that the account is a Windows Live account, then we should change the password in Windows Live. The password reset procedure could mention this...
-
cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk. She lost all access to his information.
Original title: cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk. She lost all access to his information.
Hello
- Remember to make changes to your computer before this problem started?
However, you can access the link below and follow the steps mentioned in the article and check if it helps you to fix the problem, and connect you to your normal user account.
http://support.Microsoft.com/kb/947242
I hope this helps. Let us know the result.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Community salvation.
Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...
A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.
Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found
I searched and found several articles with similar questions, so I chose a course of action
http://communities.VMware.com/message/1168241
As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.
So - my first actions were to disconnect and reconnect one of the hosts. The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.
Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.
Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.
If - goes here - any ideas? I can give other details or screen caputres
ESX3:
#%PAM-1.0
Automatically generated by esxcfg-auth
/lib/security/$ISA/pam_unix.so account required
AUTH required /lib/security/$ISA/pam_env.so
AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok
AUTH required /lib/security/$ISA/pam_deny.so
attempts at password required /lib/security/$ISA/pam_cracklib.so = 3
shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok
/lib/security/$ISA/pam_deny.so password required
session required /lib/security/$ISA/pam_limits.so
session required /lib/security/$ISA/pam_unix.so
ESX4
#%PAM-1.0
account required pam_per_user.so /etc/pam.d/login.map
AUTH required pam_per_user.so /etc/pam.d/login.map
/etc/pam.d/login.map pam_per_user.so password required
/etc/pam.d/login.map pam_per_user.so sign in required
-KjB
-
S271HL - demand guarantee, she needed no repair - I'm back with the same problem
Earlier, I sent a S271HL monitor for repair under warranty. The issue was that the screen would not activate and the only thing that happened was an orange power flashing instead of a constant blue button button. The problem is that I got, with the same problem that I sent him.
I am the home monitor today. The first two pages of order of service, under the description of the problem, I see:
said c:CX dsnt unit turn on, only a power light flashes
a: do you have a self test, no go, so informed the cs repair, cx agreed
r: at the request of the unit for repair
On the second page, I see this:
Computer data. Accessories
No accessories (No. Box)Software & other remarks:
surface scratches, no power(Note to this poster: surface scratches?) Where? I treated this monitor as it was made of Crystal.)
Diagnosis / repair:
Reported problem not noted. Monitor power towards the top with good screen, stable. Monitor adopted system intensive burnin test over the weekend, more than 63 hours, without any problem. At the end of the extensive, intensive, powered burnin test monitor then turn it several times; always under tension with a display of good and stable, no problems noted. In the course of trials, powered monitor then turn it several times; always constantly lit with a good and stable display.
===============
So, my friend has a supply for his Acer monitor (a smaller one) that has 19v and 2. 1 has, just like mine. So I borrowed her power to test my monitor and I had the same problem: an orange power button flashing.
So the question is: has anyone ever encountered this with Acer? I'll call them, but I wanted to see if there was any opinions here at the same time.
It seems that this has not worked for the first tester and launched up to more away for another tech fix, but when that tech he walks, it worked fine. I have been a mechanic my whole life, in many areas, and I saw this scenario several times. There is also the possibility that someone got lazy, but you can not prove it so just contact warranty service again and tell them that they must resume and attach it.
-
How can I change the setting in the administrator with the password in Windows XP?
How can I parameter string in the admin with the password in windows xp professional
You can not.
John
-
I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?
I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.
In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.
Hello
I suggest you to visit these links and check if it helps:
It will be useful.
-
Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.
Original title: launch of the problems of checkers:
Hello
If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.
Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software
Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off
IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
-
TV LCD W2607C with the same problem of power W2600
My Dell W2607C LCD TV has even no power problem. I had less than 3 years and have had very good care of it. I stop it after watching some tv to go with dinner. Two hours later I tried to turn it on and I have nothing. Not even a blink on the LCD. Power LED turned blue, then blinked orange.
A week ago, I finally called Dell customer service. Of course, I've been waiting for about 20 minutes. After giving all pertinent information about my Dell 26 '' LCD/TV, the operator (in English very hilly, I might add) guided me through all the troubleshooting steps I had done. None worked troubleshooting.
She tried pulling the line 'contact your cable operator' old, but I told her that the cable is fine cause it is also plugged into a second TV. She then tried to explain since it was out of warranty he could not replace. I did not stay in there and started to explain how Dell sold me a defective product and that I have LCD screens and televisions last more than 2 years and how it was unfair for a loyal customer to treat them that way. She then tried to send me to another service of technical support, but the only difference is they were going to charge me. I said 'No' and then asked his supervisor.
He tried to give the same line on 'out of warranty' and I told him that this is not an uncommon problem and if you google "Dell 26 '' TV does not turn on", he would see that there are a large number of consumers out there with the same problem as me.
He then said, "Oh but the problem you have raised is the 2600 series model not yours, yours is the 2607C.» I answered, without hesitation, "but it is still part of the same series, is - not? And it seems that the same problem was overlooked when they made the one I bought. »
I was told someone to a "higher authority" would contact me, but their calls have been rather erratic and I can't return their calls only leave voicemails. I get emails telling me how they just tried to call and when they say they would call between some time next, I end up wasting time to wait for a call that never comes.
As a last resort, I post here in the hope that I get response and are not facing customers by service script.
I ordered from Dell recently, his good faith. If I'm stuck with a very expensive paperweight, I might as well made my recent purchases and cut all ties with Dell completely.
-
I bought a desktop computer and wanted to know if I am able to have creative clouds on this plan as well as my laptop with the same problem, I'm currently?
Your subscription license allows you to have two facilities activated, so if both machines meets the system requirements so you should be able to install and connect the two.
-
default role with the password - reality check
I support the database for an application. We went from Oracle10 in Oracle11 9 months. Then recently, we applied the CPU of OCT.
The application administrator says they have a program which has recently stopped working and who worked after the Oracle11 upgrade.
The user of the application has a default role that has a password. Is this possible? A default role with a password. Would this be worked in any version of Oracle?Default role with the password is even available with Oracle XE. The default roles are enabled without the need for role password in Oracle 10.2:
SQL> drop user admin cascade; User dropped. SQL> drop user test cascade; User dropped. SQL> drop role rwp; Role dropped. SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product PL/SQL Release 10.2.0.1.0 - Production CORE 10.2.0.1.0 Production TNS for 32-bit Windows: Version 10.2.0.1.0 - Production NLSRTL Version 10.2.0.1.0 - Production SQL> SQL> create user admin identified by oraclexe; User created. SQL> grant create session, create table to admin; Grant succeeded. SQL> grant unlimited tablespace to admin; Grant succeeded. SQL> grant create user to admin; Grant succeeded. SQL> grant create role to admin; Grant succeeded. SQL> SQL> create user test identified by oraclexe; User created. SQL> grant create session to test; Grant succeeded. SQL> SQL> connect admin/oraclexe; Connected. SQL> create table t(x varchar2(10)); Table created. SQL> insert into t values('admin OK'); 1 row created. SQL> commit; Commit complete. SQL> create role rwp identified by oraclexe; Role created. SQL> grant all on t to rwp; Grant succeeded. SQL> grant rwp to test; Grant succeeded. SQL> SQL> connect test/oraclexe; Connected. SQL> select * from session_roles; ROLE ------------------------------ RWP SQL> select * from admin.t; X ---------- admin OK SQL> insert into admin.t values('test OK'); 1 row created. SQL> commit; Commit complete. SQL> select * from admin.t; X ---------- admin OK test OK SQL>There has been changes between Oracle 10.2 and 11.2 because the same script fails to 11.2 unless the role is defined with the password:
SQL> drop user admin cascade; User dropped. SQL> drop user test cascade; User dropped. SQL> drop role rwp; Role dropped. SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production PL/SQL Release 11.2.0.1.0 - Production CORE 11.2.0.1.0 Production TNS for Linux: Version 11.2.0.1.0 - Production NLSRTL Version 11.2.0.1.0 - Production SQL> SQL> create user admin identified by oraclexe; User created. SQL> grant create session, create table to admin; Grant succeeded. SQL> grant unlimited tablespace to admin; Grant succeeded. SQL> grant create user to admin; Grant succeeded. SQL> grant create role to admin; Grant succeeded. SQL> SQL> create user test identified by oraclexe; User created. SQL> grant create session to test; Grant succeeded. SQL> SQL> connect admin/oraclexe; Connected. SQL> create table t(x varchar2(10)); Table created. SQL> insert into t values('admin OK'); 1 row created. SQL> commit; Commit complete. SQL> create role rwp identified by oraclexe; Role created. SQL> grant all on t to rwp; Grant succeeded. SQL> grant rwp to test; Grant succeeded. SQL> SQL> connect test/oraclexe; Connected. SQL> select * from session_roles; no rows selected SQL> select * from admin.t; select * from admin.t * ERROR at line 1: ORA-00942: table or view does not exist SQL> insert into admin.t values('test OK'); insert into admin.t values('test OK') * ERROR at line 1: ORA-00942: table or view does not exist SQL> commit; Commit complete. SQL> select * from admin.t; select * from admin.t * ERROR at line 1: ORA-00942: table or view does not exist SQL> SQL> set role rwp identified by oraclexe; Role set. SQL> select * from session_roles; ROLE ------------------------------ RWP SQL> select * from admin.t; X ---------- admin OK SQL> insert into admin.t values('test OK'); 1 row created. SQL> commit; Commit complete. SQL> select * from admin.t; X ---------- admin OK test OK SQL>10.2 security Guide says:
If you have a role that is protected by a password, you can activate or disable the role by providing the correct password for the role in a statement of the VALUE. However, if the role is rendered a default and active role at the time of the connection, then the user should not enter a password.
11.1 and 11.2 Secuirty Guide says:
If a user is given a role that is protected by a password, you can activate or disable the role by providing the correct password for the role in the ROLE DEFINED declaration. Cannot you authenticate a role authenticated by logon password, even if you add it to the list of default roles. You must enable it explicitly to the ROLE DEFINED statement by using the required password.
Edited by: P. Forstmann on 20 Feb. 2010 10:28
Maybe you are looking for
-
Where can I or could I get a button Touch ID which will focus on my iPhone 6?
-
I don't know what is happening. My Skype has completely worked on my iPhone 5 so far. It is as if it does not load messages (I confirm my PC), so I thought it must be a system update or reinstall Skype who can fix this. I WAS WRONG. Now, he can not l
-
Hi guys,. Can advise you on what apps/drivers you install through the task sequence. Lenovo tend not to register what is absent from their sccm driver packages.
-
How can I get rid of the backup files?
Hello Whe using 'Write as leader' and "Measurement reading File" I read and save to the same file (i.e. "example.lmv"). When I run the program and the signal is recorded in this file, the information is saved in the file, but at the same time, it cre
-
I would like to print both sides of the pages, but the "two parts" button is dimmed. I use the printer Deskjet 3050 J610 with OS 10.7.2. I checked to make sure I have the latest version of the driver. Can anyone help?