Downloaded Beta-8; Will not install

Similar Questions

• Pavilion sleekbook 14pc: WINDOWS updates to DAY AS DOWNLOAD, BUT DO WILL NOT INSTALL

  my windows update will not work. He says that it is impossible to proceed with the installation and changes are undone.

  everything seems to be quite appropriate when cking pc settings, HOWEVER, my HP Support Assistant was correct info to the bottom of the page where it says that I need a new ID for the operating system. I should just close the wizard checks to see if that will work around this info and maybe allow the updates downloaded install OR am I following a false trail?

  I lost hours and hours for months trying to find a solution to this CHALLENGE without talking about money spent on assistance and programs that were supposed to address.

  Has anyone else had such a challenge. Y at - it a solution?

  Thank you

  brenda1235 wrote:

  Well, now that I've been through all this and try to get updates inally I am getting an error code nd have ckd it out and made all the troubleshooting recommended. Since I was now able to get internet this error code may have corrected a 8024, 000.  My first error code...

  Hello

  Windows Update is damaged.

  Please, do try the fixes and scan as shown in the first post.

  In addition, follow all the steps detailed here:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/Windows-Update-error-8024A000/TD-p/2916157

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

  Kindly let me know how it goes.

• Download Flash player will not accept my valid password

  Download Flash player will not install because it doesn't accept my valid password

  It is NOT a password Adobe® that you need, and is NOT Setup Adobe asking for it. This is your operating system administrator password, and your operating system is in need.

• Windows Vista Ultimate SP2 will not install update KB2378111 or install downloaded programs and returned with error code 80070570

  Hello... my computer will not install update KB2378111 with a code error 80070570.  In addition, I can not install all programs downloaded from the internet, specifically my anti-virus software.  I'm running without any software antivirus at this time.  I ran the most recent Microsoft malicious software removal tool and it showed that there is no problem.

  I'm running without any antivirus at this time software

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety

• Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

  have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

  have you tried the manager used tasks related to bugs

  Msconfig

  Explorer.exe

  and have had no joy... Please heeeeeeeeeeeelllpppppp

  Hello

  It is the fix in case there are any information it helps.

  A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
  screen early in the startup process
  http://support.Microsoft.com/kb/977675

  Microsoft - contact patch Support issues.
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  ======================

  Other troubleshooting methods that can help.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  When you ask a question you will need to provide some basic information

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• The last update for Adobe Acrobat Reader will not install on my iPad 2. It downloaded, but I do not stall.

  The last update for Adobe Acrobat Reader will not install on my iPad 2. He has downloaded, but fails to install. Have used the drive without problems so far. I have the latest update installed on my iPad ios. How can I solve this?

  Hi joannaw84630025,

  Restart your iPad, make sure that iOS id updated to version 8 or higher. Once rebooted try to update Acrobat Reader Adobe Acrobat Reader from the App Store again

  Kind regards

  Meenakshi

• I just bought a Canon 7 d Mk2 but raw files will not open in Cs5 and Adobe Camera Raw 8.7 downloads will not install. What can I do?

  I just bought a Canon 7 d Mk2 but raw files will not open in Cs5 and Adobe Camera Raw 8.7 downloads will not install. What can I do?

  CS5 cannot go higher than 6.7. If your device requires a more recent version, download the free Adobe dng converter. You convert your RAW to DNG, which can then be processed 6.7 in camera raw.

• Flash player will not install white Installer, full download? tool remove flash?

  Windows 7 64-bit, Firefox, Explorer, Chrome

  For a long time flash player will not install (updates for upgrades).

  If I go to the home page that I can download the 1 MB file then open it and the installation box opens but never does nothing and is all black except for the top bar. I can not even close. I have to 'end task' it. I has been underway for a year or two.  I usually find a link to the version of the full installer, but don't find it anymore.

  Is there a tool to remove all the remains of Adobe flash player?

  Link to the full installer version of the player?

  I tried to uninstall all versions, but still the same problem

  Thank you

  Wow, I saw a post from m_vargas (personal Adobe): this is a known problem, so obviously there is a problem that nobody knows how to solve. Fix Adobe is use use only Chrome or installer - reinstall your operating system the offline. Great job Adobe.

• Equium L300 - will not install anything other than Microsoft downloads

  Equium L300 put up-to-date with Windows 7. I'm a novice PCs which concerns so any help welcome. My laptop will not install 'programmes' (for example Java AVG etc etc) to the bottom of charges, ask to run and then nothing happens. It is used to!

  I tried just about everything I can think but now can't see the forest for the trees. I stand to lose 50 pounds after he tried to update my sat nav!

  Hmmm... It's strange. Right click on setup.exe and run as administrator. In addition, disable the firewall/antivirus.

• After downloading firefox Betaicone will not mount on Mac ibook G4

  Downloaded firefox beta and the icon doesn't mount not so it will not install if I should try another version

  Unfortunately, last version of Firefox (version 10) supports only Mac OS X 10.5 or higher Intel processor. The system you are currently using is no longer supported by Firefox.

  For now, Firefox 3.6 is to be maintained and supported by Mozilla. You can upgrade to it as follows:

  1. Open the Applications folder.
  2. Drag the Firefox application to the Trash.
  3. Download and install Firefox 3.6 from here.

  Note that Firefox 3.6 support will cease soon (April 2012). After that, you can use another browser like Firefox on your system (TenFourFox). Remember that TenFourFox is not prepared or approved by Mozilla in some way.

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• Windows Vista updates which will not install

  My OS Vista Home Premium 32 - bit for my HP Pavilion a6460t computer will not install the updates listed below.  I scanned for virus conficker, as well as for other viruses, most recently with the Microsoft OneCare security scan (beta), and my computer is not infected according to these analyses.  I have also tried installing these updates directly from the websites of download from Microsoft without success ("the following updates were not installed").  Auto update is on.

  Update security for Windows Vista (KB960225)
  Update security for Windows Vista (KB958690)
  Update for Windows Vista (KB959772)
  Update definition for Windows Defender - KB915597 (definition 1.55.1119.0)
  Update for Windows Mail Junk e-mail filter [March 2009] (KB905866)

  Thank you

  Ron Alexander

  After several calls to the technical support of HP (which is also the warranty service for my Vista installed factory), the problem of update is finally resolved by reinstalling the operating system Vista.  Thanks again for all your help and suggestions.

  Ron Alexander

• 4200 software all-in-one printer will not install in Windows 7

  I have a 4280 printer all in one that works very well with Vista 32 bit OS. I really like the interface of HP. I had a Dell with Windows 7 Professional 64 bit desktop computer. I was able to load without any problems except the printer.

  I downloaded the latest software of HP 64 bits for the device 4280. Installation takes place upwards the agreement "accept" screen and when I check the box to accept (name and c drive location, features to install, etc.) and then press the "continue" button disappears from the HP installation window. There is no reported errors or system events that I can find.

  I tried all the suggestions on the site of HP for Windows 7 with no luck. I found Windows 7 install a driver immediately once you plug the USB connection. Tried a new printer / I drive with no luck.  I tried Windows 7 32 bit with identical behavior that disappears. I tried safe mode and diagnostic mode in case something was interfering... same result.  At least antivirus and firewall have been disabled and nothing else worked. I even ordered a CD from HP with the same result as the downloaded program. CHKDSK and scannow will find no problem with Windows.

  I can run the printer and the scanner with windows drivers, but the interface, especially for the scanner is not functional enough. I get kind of work in a virtual XP environment, but it is very slow and a little less functional loading... vista vs XP I guess. In short not a viable solution. I could buy a new all-in-one, but I'm worried it will not install and this can become costly experimentation, not to mention my stock of the 4280 cartridge.

  I would really like to find a way to get the HP software to install. Someone has an idea?

  Hello again Tom5223,

  I see that we still have problems installing the printer on your computer.

  I suggest to call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  A representative of HP has the ability to use more advanced troubleshooting steps and will be better equipped handle a problem like this.

  Thank you for your time.