Windows Vista updates which will not install

Similar Questions

• Windows Vista Ultimate SP2 will not install update KB2378111 or install downloaded programs and returned with error code 80070570

  Hello... my computer will not install update KB2378111 with a code error 80070570.  In addition, I can not install all programs downloaded from the internet, specifically my anti-virus software.  I'm running without any software antivirus at this time.  I ran the most recent Microsoft malicious software removal tool and it showed that there is no problem.

  I'm running without any antivirus at this time software

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for Windows Vista (KB2564958) security will not install on my computer. 8007000D error code

  Hello:

  I have two related tech has problems with my laptop with windows vista installed on it.  It does not perform a windows vista (kb2564958) security update and I get an 8007000D error code.  In addition, I am more able to perform disk cleanup and when I try it says it doesn't work anymore.  Please advise me how to solve these problems.  Thank you

  David

  KB2476490 is listed in the display of the installed updates?

• Windows Vista fix KB947821 will not install.

  So I meet me the error 800b0100 and he said to download via the website, but whenever I open the download to install, it is just that

  Initializing installation... done!
  Installing the hotfix for Windows (KB947821) (update 1 of 1)...

  and the installation bar move at all.  However the checksur.exe checksurlauncher.exe and CheckSURPackage.exe are all performed, but nothing ever happens, what's the problem here?

  I don't currently have an anti-virus or anti-spyware installed...

  Not good. Get an app installed AV & update should be your first order of the day immediately after the connection of the computer to the internet after doing the clean install. Yes, before check you in Windows Update AND before you install the OBJECTIVE and/or Mozilla.

  1. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT difficulty modes and AGGRESSIVE; reboot & test [1]

  2. If still no joy, chances are that you see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on an OEM computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Wish I had better news for you. Better luck the next time around!

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• relocation of the agars recovery on computer laptop girls. Windows Vista Basic. Will not install correctly.

  Had to reinstall Windows Vista Basic on my laptop now girls probably 4 or 5 times over the past year.  A question is we get full and you get to a screen that says not to interrupt and cela will take a few minutes, which, on an attempt, I let it run all night and never went.  Finally, just let it load and put an end to the function and let him simply use the laptop.  Then after a few moments to use his laptop begins to freeze.  So, I have to go and try to reinstall its OS.

  If you restore so frequently, or at all, someone is something fundimentally incorrect and visit places / download infected files.

  Recover PC to factory specifications, winupdate turn off "recommended updates", but allow critical updates. Consult the manufacturer of your laptop and see if there are recommended updates shown there.

  Install a decent Anti Virus, MS Security Essentials is free. Do this before you install any programs or connect to the scocial network sites

• Vista update module will not install on TVSU

  KB 958865 Module of Vista update will not be installed when running of my think Vantage System Update. Also. I have a problem, install service pack 2 Vista after a recent restoration. These two depend on each other?

  Thank you.

  It is the screen I get.

  http://i101.Photobucket.com/albums/M46/mixineer/failedupdate.jpg

  All the problems are solved. SP2 would not install because of some corrupted files. After a take-over of the factory... all right.

• Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• Windows Vista Home Basic will not update, System 5 error, access is denied.

  My windows will not update. Microsoft fixit tool will not install on my machine. When I try to reset the updates manually I get the error System 5, access is denied.

  Hello!

  This link may be useful
  http://support.Microsoft.com/kb/555644
  Thank you
  Makoi

• Update for Windows XP (KB2509553) security will not install starts but will not end

  Update for Windows XP (KB2509553) security is not installed

  Hi RogerGreene,

  1. Did you the latest changes on the computer?
  2. You are able to install some other updates on the computer?
  3. You have security software installed on the computer?
  4. You receive an error message when you try to install the update?

  Method 1

  I suggest that you manually download and install the update, check if it installs properly.

  Update security for Windows XP (KB2509553)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16350

  Method 2

  If the previous step fails then I would suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Windows service pack 2 will not install on my computer

  I have windows vista and service pack 2 will not install on my computer what should I do

  Start here:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366 TaurArian [MVP] 2005-2010 - Update Services

• My installer of windows is damaged and will not install office 2007, I tried the fixes, but still get error 2

  My installer of windows 7 is corrupted and will not install office 2007, I tried the suggested fixes but still error 2 in windows install when I hit start

  How can I get this problem... Thank you

  Well, I don't know what patches you have tried.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  or

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Also:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Windows 8 Media Center will not install, get useless message error "something went wrong".

  I have the version upgrade of Windows 8 Pro and can not install Media Center.

  I signed up for a key that was sent to me and past the initial check whenever I try to install it.

  I check the checkbox for the conditions once the key is successfully verified.

  I then get the bar of green progression for the verification of updates and after about 30 seconds, I get the error message 'something went wrong '.

  Hello

  This is how I solved this problem.
  I have notised that a file with the name ehome. has been "created" in the windows folder.
  This seems to block the creation of the eHome folder, where the Media Center should install.
  Remove the ehome. file, create the eHome directory and try again to install the Media Center.
  Worked for me on two different PCs.
  See you soon
  M

• I have a new laptop with Windows 7 and it will not install a game of mine. It's Agatha Christie: Triple murder mystery Pack; requirements which are Windows 98/ME/2000/XP/Vista...how can I make it work?

  When I put the game, happens to the Setup screen, but when I click on install, it does not work... so I need a way to make it work... Please help me.

  Hi caecae1461,

  Welcome to the Microsoft Answers Forum!

  We would like to know, do you receive a correct error message or error code when it freezes?

  As the game is not also installed in the Compatibility Center, you can try to run the game in compatibility mode. Steps to follow:

  i. right click on the game (on the .exe file)

  II. click on properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Below the link for reference: brand to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.