DPC_WATCHDOG_VIOLATION!

Similar Questions

• Windows 2012 - DPC_WATCHDOG_VIOLATION ERROR

  Hello

  I recently installed the 2012 R2 server on our server, but every day the server keeps restarting with the error DPC_WATCHDOG_VIOLATION.

  Any ideas?

  Concerning

  Adam Bhai

  Adam

  You yourself suggested VB was part of the problem and the auditor has confirmed that.  Your choice must leave it and crashed or remove it and try something else.

  

• DPC_WATCHDOG_VIOLATION Windows 8

  DPC_WATCHDOG_VIOLATIONI have this problem

  This thing happened when I installed kaspersky Internet Security, my pc does not open the Office to all the

  Acer aspire E1 - 532 celery Intel

  Who can help please

  Hello

  I would like to know some information about the problem so that we can help you better.

  What is the complete with code error message when you say, 'DPC_WATCHDOG_VIOLATION '?

  Thank you for details on the issue.

  Bug DPC_WATCHDOG_VIOLATION control has a value of 0 x 00000133. This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above.

  I suggest you try to start your computer in safe mode startup parameters of Windows in the Windows recovery environment and check.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Safe mode starts Windows with a minimal set of drivers and services. If a problem doesn't reappear when you start your PC in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  If the computer starts in safe mode, I suggest you to uninstall the security software and then try to start your computer in normal mode.
  Reference:
  Uninstall, change or repair a program
  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Random blue frames on restart-DPC_WATCHDOG_VIOLATION 'code 0 x 00000133 '.

  Random blue frames on reboot.  Any driver could not be found, and I can't find what the hardware could be the cause of the problem.

  code

  0 x 00000133 (0 x 0000000000000283, 0 x 0000000000000282, 0 x 0000000000000000, 0 x 0000000000000000)

  So far, have done in depth virus analyses, completely erased my disk and did a new install, unplug all non-essential equipment of the machine.  I remember this problem from about 6 months after an update Catalyst Control Center (AMD video card software) but which does not any sense why its doing after a thorough cleaning.

  AMD FX4170 processor

  Video AMD 6800 Radion

  Here are the 3 event view memory.dmp files

  Help, please!

  Thank you

  https://onedrive.live.com/redir?RESID=F1D407EBF64DDBCA! 877 & authkey =! ANmtJzCz1eR_kLA & ithint = the file % 2cdmp

  https://onedrive.live.com/redir?RESID=F1D407EBF64DDBCA! 876 & authkey =! AIbAzBOrMHC8WgU & ithint = the file % 2cdmp

  https://onedrive.live.com/redir?RESID=F1D407EBF64DDBCA! 875 & authkey =! AJ5pXVjyr9DDnyY & ithint = the file % 2cdmp

  Let me know if the memory.dmp files include not properly.  First time

  Hello Jason,

  Thank you for reaching out to us on Microsoft Community.

  Bug DPC_WATCHDOG_VIOLATION control has a value of 0 x 00000133. This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above. The value of parameter 1 indicates whether one single DPC exceeded a timeout, or if the system is cumulatively spent a long period of time IRQL DISPATCH_LEVEL or higher.

  I suggest that you try to run the fix provided in the link below all through the memory.dmp files provided by you.

  FIX: Error Stop 0 x 00000133 occurs on a computer that is running Windows 8 or Windows Server 2012

   

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Experiencing the Bluescreens DPC_Watchdog_Violation

  This morning I had a wicked series of Bluescreens on my computer desk-DPC_Watchdog_Violation and Bad_Pool_Caller errors.

  Have not recently installed new drivers or major new programs.

  Any advice on how to fix?

  BG

  First, you need to update to win 8.1 in itself, it may solve the problem and Microsoft requires users to upgrade anyway.

  This accident was connected to your SPFDRV. SYS (The NDIS packet redirector driver). Driver update Site: http://www.softperfect.com/support/.

  I remove the current driver and install the latest driver available.

• BSOD DPC_WATCHDOG_VIOLATION

  I received a copy of Windows 8 free of charge through my school through the Microsoft DreamSpark network. I upgraded my laptop HP dv7t-7000 Quad Edition and since I get BSOD with error DPC_WATCHDOG_VIOLATION. This happens usually when I am producing music with a program called REAPER and an audio interface (soundcard) called a focusrite saffire 6 usb.

  Here's my crash dumps-

  https://sites.Google.com/site/randomfileshost/home/dumps.zip?attredirects=0&d=1
  What should I do?

  The minidump files showed a stop error DPC_WATCHDOG_VIOLATION (133) which is caused by the ffusbaudio.sys:

  BUCKET_ID: 0x133_DPC_ffusbaudio+ 6426

  The ffusbaudio.sys, which is dated October 31, 2011, may be a driver for a USB Focusrite audio device.

  You have such a device, and you can find a newer driver?

• DPC_Watchdog_Violation WIN8 so that outlook is running

  Good afternoon

  Recently, we bought a surface 3 pro to my boss.

  It synchronizes gmail with outlook, but sometimes when he works with outlook, a blue screen comes out with the message

  DPC_Watchdog_Violation

  Here's the .dmp files and the configuration system.

  https://onedrive.live.com/redir?RESID=7CF2368340DF5CC5! 308 & authkey =! AKSDukVnP8lhTDY & ithint = the file % 2czip

  I have re installed the sync tool, updated hardware drivers, apply an anti malware.

  I had done everything I've seen on the forums. But he continues to be frequently.

  Thanks in advance for your help.

  Hello

  Since this is a new unit, it would be a good idea to contact the Surface Support as the unit can
  need of repair or replacement.

  Support surface
  http://www.Microsoft.com/surface/en-us/support/?LC=1033

  Surface - contact us
  http://www.Microsoft.com/surface/en-us/support/contact-us/

  Surface - Online Service Center
  https://myService.surface.com/en-us/pages/welcome.aspx

  Surface 3 Pro - hardware and drivers
  http://www.Microsoft.com/surface/en-us/support/browse/surface-Pro-3?category=hardware-and-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DPC_WATCHDOG_VIOLATION Windows 8 Sony Vaio

  Hi, I have a laptop Sony Vaio S Series running windows 8 home edition. Recently, I get a BSOD DPC_WATCHDOG_VIOLATION all minutes of use. This error seems to be common for users of SSD, but I don't have one, so I wonder if it is maybe another firmware/driver, what is the cause. I installed all the windows recommended and important and VAIO Updates. Here is my minidump file: https://skydrive.live.com/redir?resid=BC16C1D02E6769BB! 112

  Andrewazi

  These related usb8023x.sys driver USB Remote NDIS of Microsoft.  As a part of the operating system can you run a repressive file check the to sequenced.

  Also which devices USB do you have on this computer?

  To run a check of the filesystem (CFS)

  
  

  Open a cmd high window

  (Go to start > type CMD > right click and run as administrator)

  Type SFC/scannow

  You may need to run this upward to 3 times.

  Let us know the results at the end

  http://support.Microsoft.com/kb/929833

  http://pcsupport.about.com/od/toolsofthetrade/HT/SFC-SCANNOW.htm

• DPC_WATCHDOG_VIOLATION and DRIVER_POWER_STATE_FAIlURE BSOD

  I get one of these errors (especially DPC_WATCHDOG) about 30-40 seconds after I type my password and get into Windows. Starting in safe mode is the only way that I can use my computer.

  Thanks for your help

  Here's my dump files: http://1drv.ms/1j7KoX2

  Hello

  We have two coherent bug checks:

  DRIVER_POWER_STATE_FAILURE (9f)

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  By default, the fault of the accident is pci.sys which is NOT the real cause. If we run one! IRP on the 4th parameter of the verification of bug:

  > [16, 2] e1 0 fffffa800b9b4290 fffff8037bba8830-fffffa8008135720 00000000 success error cancel pending
  \Driver\nvlddmkm nt! PopRequestCompletion

  nvlddmkm.sys is the video driver nVidia.

  DPC_WATCHDOG_VIOLATION (133)

  This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above.

  5: kd > k
  Call child-SP RetAddr site
  fffff880 '00b 84398 fffff800' 69e4ff4b nt! KeBugCheckEx
  fffff880'00b843a0 fffff800 69 d 14774 nt! : FNODOBFM: 'string' + 0x145a4
  fffff880 '00b 84420 fffff800' 69c2ceca nt! KeUpdateTime + 0x2ec
  fffff880 '00b 84600 fffff800' 69cc901e hal! HalpTimerClockInterrupt + 0 x 86
  fffff880 '00b 84630 fffff880' 011 nt has 9596! KiInterruptDispatchLBControl + 0x1ce
  fffff880 '00b847c0 fffff880' 011a933b ACPI! ACPIEcServiceIoLoop + 0x1c2
  fffff880 '00b 84850 fffff880' 011a8b30 ACPI! ACPIEcServiceDevice + 0xaf
  fffff880 '00b 84880 fffff880' 011ab510 ACPI! ACPIEcGpeServiceRoutine + 0xc
  fffff880 '00b848b0 fffff800' 69cf8ca1 ACPI! ACPIInterruptDispatchEventDpc + 0 x 400
  fffff880 '00b849b0 fffff800' 69cf88e0 nt! KiExecuteAllDpcs + 0 x 191
  fffff880 '00b84af0 fffff800' 69cf99ba nt! KiRetireDpcList + 0xd0
  fffff880'00b84c60 00000000 00000000' nt! KiIdleLoop + 0x5a

  It seems that ACPI.sys is mentioned throughout the stack, possibly the video driver, causing a loop.

  ---------------------

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2 uninstall COMODO as soon as POSSIBLE as it can be in conflict with TrueCrypt.

  Kind regards

  Patrick

• Crashing Windows 8 DPC_WATCHDOG_VIOLATION

  Just at the beginning when my computer was returning from hibernation (Yes, that's when all my crashes happen), I had a BSOD when I analyzed the dump files with which crashed he gave me this:

  ---------------------------------------------------------------------------------------------------------------

  We Dim 2014 - 04 - 13 10:31:45 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\041314-83694-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x5A440)
  Bug check code: 0 x 133 (0 x 504, 0 x 503, 0x0, 0x0)
  Error: DPC_WATCHDOG_VIOLATION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: watchdog of the DPC has detected an operation extended to a level IRQL DISPATCH_LEVEL or higher.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem may be due to a thermal problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  We Dim 2014 - 04 - 13 10:31:45 PM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: athw8x.sys (athw8x + 0xBCA43)
  Bug check code: 0 x 133 (0 x 504, 0 x 503, 0x0, 0x0)
  Error: DPC_WATCHDOG_VIOLATION
  file path: C:\Windows\system32\drivers\athw8x.sys
  product: network of Qualcomm Atheros CB42/CB43/MB42/MB43 adapter driver
  company: Qualcomm Atheros Communications, Inc.
  Description: Qualcomm Atheros Extensible wireless device driver
  Bug control description: watchdog of the DPC has detected an operation extended to a level IRQL DISPATCH_LEVEL or higher.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem may be due to a thermal problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athw8x.sys (Extensible Qualcomm Atheros, Qualcomm's Atheros Communications, Inc. wireless device driver.).
  Google search: Qualcomm-Atheros Communications, Inc. DPC_WATCHDOG_VIOLATION
  ---------------------------------------------------------------------------------------------------------------------------------

  I've had several accidents before (DRIVER STATE of FAILURE) and ntoskrnl.exe was the cause of the accident.

  Here is the link to the mindump file I've attached in skydrive:

  https://onedrive.live.com/redir?RESID=262EE20BB73C8E9%21430

  So, what should I do? It seems that my atheros qualcomm driver (ntoskrnl.exe) is also behind this. Should I all pilots obsolete? How can I solve this problem?

  Thank you!

  Kevin

  The most recent was Athw8x. sys with the device driver wireless Extensible Qualcomm Atheros Qualcomm Atheros Communications company description.  Yours is 2 years old.  I'd install the most recent driver available.

  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16628.amd64fre.win8_gdr.130531 - 1504
  Computer name:
  Kernel base = 0xfffff800 '52a 13000 PsLoadedModuleList = 0xfffff800' 52cdfa20
  The debugging session: Sun Apr 13 18:31:45.630 2014 (UTC - 04:00)
  System Uptime: 1 day 2:09:17.617
  Bugcheck 133 {504, 503, 0, 0}

  WARNING: Unable to verify timestamp for athw8x.sys
  ERROR: Module load completed but symbols can be loaded for athw8x.sys
  Probably caused by: athw8x.sys (athw8x + bca43)

• DPC_Watchdog_Violation [SOLVED] WIN8

  I've been to the DPC_Watchdog_Violation for a few weeks now and I don't know how to fix it. I'm not a complete "know everything" when it comes to hardware in computers.

  Specifications are
  Intel Core i5 3230 M @ 2.6GHz
  16 GB RAM DDR3
  1 TB HARD DRIVE
  NVIDIA GeForce 710M

  Dmp points to Apfiltr.sys accident

  Apfiltr.sys is Alps Touch Pad driver.

  Install the latest drivers for your touchpad map and graphic. Run a free malwarebytes scan.

  http://www.Malwarebytes.org/products/malwarebytes_free/

  Restart and monitor the system

  You can disable the auditor now.

• DPC_WATCHDOG_VIOLATION on Windows 8 stop

  Whenever I stop, I get the DPC_WATCHDOG_VIOLATION. I tried to update all drivers, BIOS, and Firmware of the SSD, but still get the error message.

  Here's the C:\Windows\Minidump:
  https://www.dropbox.com/s/z9puzzvyjbh4soj/minidump.zip
  Any help would be greatly appreciated!

  These related to the SAlpham64.sys of SteelSeries Corporation HID driver.  I would like to re - install the most recent driver available (even if it is the same date)

  I have also remove and replace McAfee with MSE

  McAfee is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER!

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/

  133, {1, 780, 0, 0} error checking
  Probably caused by: SAlpham64.sys (SAlpham64 + 32a 0)
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  133, {0, 281, 280, 0} error checking
  Probably caused by: SAlpham64.sys (SAlpham64 + 32a 0)
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  133, {0, 281, 280, 0} error checking
  Probably caused by: SAlpham64.sys (SAlpham64 + 32a 0)

• 8 PRO CRASH VICTORY: DPC_WATCHDOG_VIOLATION

  Saturday, December 22, 2012 12.05.45 GMT your computer crashes
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: hal.sys (hal! HalSetTimeIncrement + 0x3EFE)
  Bug check code: 0 x 133 (0 x 780, 0x1, 0 x 0 0 x 0)
  Error: DPC_WATCHDOG_VIOLATION
  Bug control description: watchdog of the DPC has detected an operation extended to a level IRQL DISPATCH_LEVEL or higher.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem may be due to a thermal problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: hal.sys.
  Google search: hal.sys DPC_WATCHDOG_VIOLATION

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• dpc_watchdog_violation "your pc encountered a problem and needs to restart".

  Hi guys!

  I get the BSOD on my desktop pc and there's a line below saying 'If you want, you can search for DPC_WATCHDOG_VIOLATION', after days of searching around I semi put this down to a driver issue, I wonder how I go on fixing the issue.
  I noticed that the drive (on task MGR) runs at 100% until it freezes
  The mouse pointer becomes semi does not and if I look at a video of his deformed apears
  This problem is really starting to affect me because I'm unable to use my desktop pc!
  Thanks in advance
  Matt!

  Hello

  I put the error up to my default graphics card, it seems that the fan broke and it could overheat and cause the bsod! After using my chart internal for a day or two, I decided that this is certainly true!

  Now, I bought a new graphics card and I'm now confronted with the text, checking NVRAM any help on this would be greatly appreciated! It seems to stick for more than 20 minutes

  I use one

  ASROCK 775 TWINS MOTHERBOARD

  2 GB ram ddr 2

  450 watt power supply

  the graphics card I am using is a gt Gigabyte 630!

  Thanks in advance

  Matt

• Premiere Pro 2015.3 CC, BSOD, win 10, DPC_WATCHDOG_VIOLATION

  Hi - just installed creative cloud, Photoshop and Premier Pro. I got it for first. install goes OK, photoshop works very well, but first BSOD every time with DPC_WATCHDOG_VIOLATION. It has never worked. the machine is Windows 10, recent updates. ASUS P8Z77 - V LX motherboard, Intel processor i7 24 GB of RAM, a 128 GB SSD for C:, D: Velociraptor. generic wifi card. That's all that is in the box. BIOS is reasonably up-to-date, no operational problems of any kind. in the years that I have owned this machine, this is the first and the only BSOD I have seen.

  the behavior of specific failure is:

  * from the cloud creative meta-app

  * Click the button OPEN first

  * splash screen displays

  * mouse move slowly in the middle of "blocking detector", after 100 to 500 mS mouse freezes, CAPSLOCK indicator does not work.

  * 5 to 20 seconds later, BSOD, DPC_WATCHDOG_VIOLATION.

  I figured that my fairly old graphics, MSI Radeon HD 7700 card or driver was the problem, so I bought and configured a GeForce GTX 950 EGVA. using a 27 "Displayport monitor.

  I did RTFM and web research I could before writing. I read audio driver from nvidia, integrated audio system conflicts, etc. my audio device (sole) main is a Native Instruments Komplete Audio 6. all other devices have been disabled in the Windows Device Manager. integrated audio system has been disabled in the UEFI BIOS.

  I'm not overclocking, the machine is immaculate inside (eg. No dust bunnies blocking the air), video performance is subjectively good with any application I can think of except the first.

  I made a support with Rahul cat, which connected to my computer remotely and was unable to find the problem. ticket 0188157584. That was before I installed the card GTX 950 and disabled all the drivers/audio devices unused.

  I'm puzzled. I'm about to ask for my money. any ideas?

  Post edited by: missing info to tom jennings

  problem disappeared. I still don't know why BSOD first with the old Radeon card, but for the new card GTX 950, first load properly, no BSOD, after I removed all the bloatware - NVIDIA PhysX NVIDIA, all these nonsense of 3D games. a quick survey of a it seems that even for the games of the assistance program bloating is not helping. na certainly not here.

  as a side comment, it's bad for all of us that the maintenance and installation of the driver has become a venue for advertising.