DPC_WATCHDOG_VIOLATION Windows 8

DPC_WATCHDOG_VIOLATIONI have this problem

This thing happened when I installed kaspersky Internet Security, my pc does not open the Office to all the

Acer aspire E1 - 532 celery Intel

Who can help please

Hello

I would like to know some information about the problem so that we can help you better.

What is the complete with code error message when you say, 'DPC_WATCHDOG_VIOLATION '?

Thank you for details on the issue.

Bug DPC_WATCHDOG_VIOLATION control has a value of 0 x 00000133. This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above.

I suggest you try to start your computer in safe mode startup parameters of Windows in the Windows recovery environment and check.
Refer to this article:
Start settings for Windows (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

Safe mode starts Windows with a minimal set of drivers and services. If a problem doesn't reappear when you start your PC in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

If the computer starts in safe mode, I suggest you to uninstall the security software and then try to start your computer in normal mode.
Reference:
Uninstall, change or repair a program
http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

I hope this information helps.

Please let us know if you need more help.

Thank you

Tags: Windows

Similar Questions

  • DPC_WATCHDOG_VIOLATION Windows 8 Sony Vaio

    Hi, I have a laptop Sony Vaio S Series running windows 8 home edition. Recently, I get a BSOD DPC_WATCHDOG_VIOLATION all minutes of use. This error seems to be common for users of SSD, but I don't have one, so I wonder if it is maybe another firmware/driver, what is the cause. I installed all the windows recommended and important and VAIO Updates. Here is my minidump file: https://skydrive.live.com/redir?resid=BC16C1D02E6769BB! 112

    Andrewazi

    These related usb8023x.sys driver USB Remote NDIS of Microsoft.  As a part of the operating system can you run a repressive file check the to sequenced.

    Also which devices USB do you have on this computer?

    To run a check of the filesystem (CFS)
    Open a cmd high window

    (Go to start > type CMD > right click and run as administrator)
    Type SFC/scannow
    You may need to run this upward to 3 times.
    Let us know the results at the end

  • Crashing Windows 8 DPC_WATCHDOG_VIOLATION

    Just at the beginning when my computer was returning from hibernation (Yes, that's when all my crashes happen), I had a BSOD when I analyzed the dump files with which crashed he gave me this:

    ---------------------------------------------------------------------------------------------------------------

    We Dim 2014 - 04 - 13 10:31:45 PM GMT crashed your computer
    crash dump file: C:\Windows\Minidump\041314-83694-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x5A440)
    Bug check code: 0 x 133 (0 x 504, 0 x 503, 0x0, 0x0)
    Error: DPC_WATCHDOG_VIOLATION
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: watchdog of the DPC has detected an operation extended to a level IRQL DISPATCH_LEVEL or higher.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem may be due to a thermal problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    We Dim 2014 - 04 - 13 10:31:45 PM GMT crashed your computer
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: athw8x.sys (athw8x + 0xBCA43)
    Bug check code: 0 x 133 (0 x 504, 0 x 503, 0x0, 0x0)
    Error: DPC_WATCHDOG_VIOLATION
    file path: C:\Windows\system32\drivers\athw8x.sys
    product: network of Qualcomm Atheros CB42/CB43/MB42/MB43 adapter driver
    company: Qualcomm Atheros Communications, Inc.
    Description: Qualcomm Atheros Extensible wireless device driver
    Bug control description: watchdog of the DPC has detected an operation extended to a level IRQL DISPATCH_LEVEL or higher.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem may be due to a thermal problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athw8x.sys (Extensible Qualcomm Atheros, Qualcomm's Atheros Communications, Inc. wireless device driver.).
    Google search: Qualcomm-Atheros Communications, Inc. DPC_WATCHDOG_VIOLATION
    ---------------------------------------------------------------------------------------------------------------------------------

    I've had several accidents before (DRIVER STATE of FAILURE) and ntoskrnl.exe was the cause of the accident.

    Here is the link to the mindump file I've attached in skydrive:

    https://onedrive.live.com/redir?RESID=262EE20BB73C8E9%21430

    So, what should I do? It seems that my atheros qualcomm driver (ntoskrnl.exe) is also behind this. Should I all pilots obsolete? How can I solve this problem?

    Thank you!

    Kevin

    The most recent was Athw8x. sys with the device driver wireless Extensible Qualcomm Atheros Qualcomm Atheros Communications company description.  Yours is 2 years old.  I'd install the most recent driver available.

    Windows 8 Kernel Version 9200 MP (4 procs) free x 64
    Product: WinNt, suite: TerminalServer personal TerminalServer
    By: 9200.16628.amd64fre.win8_gdr.130531 - 1504
    Computer name:
    Kernel base = 0xfffff800 '52a 13000 PsLoadedModuleList = 0xfffff800' 52cdfa20
    The debugging session: Sun Apr 13 18:31:45.630 2014 (UTC - 04:00)
    System Uptime: 1 day 2:09:17.617
    Bugcheck 133 {504, 503, 0, 0}

    WARNING: Unable to verify timestamp for athw8x.sys
    ERROR: Module load completed but symbols can be loaded for athw8x.sys
    Probably caused by: athw8x.sys (athw8x + bca43)

  • DPC_WATCHDOG_VIOLATION on Windows 8 stop

    Whenever I stop, I get the DPC_WATCHDOG_VIOLATION. I tried to update all drivers, BIOS, and Firmware of the SSD, but still get the error message.

    Here's the C:\Windows\Minidump:
    Any help would be greatly appreciated!

    These related to the SAlpham64.sys of SteelSeries Corporation HID driver.  I would like to re - install the most recent driver available (even if it is the same date)

    I have also remove and replace McAfee with MSE

    McAfee is a common cause of BSOD.
    I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER!

    http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    http://www.Microsoft.com/security_essentials/

    133, {1, 780, 0, 0} error checking
    Probably caused by: SAlpham64.sys (SAlpham64 + 32a 0)
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    133, {0, 281, 280, 0} error checking
    Probably caused by: SAlpham64.sys (SAlpham64 + 32a 0)
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    133, {0, 281, 280, 0} error checking
    Probably caused by: SAlpham64.sys (SAlpham64 + 32a 0)

  • Windows 2012 - DPC_WATCHDOG_VIOLATION ERROR

    Hello

    I recently installed the 2012 R2 server on our server, but every day the server keeps restarting with the error DPC_WATCHDOG_VIOLATION.

    Any ideas?

    Concerning

    Adam Bhai

    Adam

    You yourself suggested VB was part of the problem and the auditor has confirmed that.  Your choice must leave it and crashed or remove it and try something else.

  • Windows 8.0 get BSOD. Error DPC_WATCHDOG_VIOLATION.

    Hello

    I just got the error yesterday and today so I'm a little worried. Both times it happened shortly after starting the computer.

    Minidumps:

    https://onedrive.live.com/redir?RESID=1E345129C9E50141! 278 & authkey =! AO5qVP7gEsqB6yM&ithint=file%2c.zip

    If you need more information, ask. Thank you very much for the help.

    RK

    These were related to an OS driver called netbt.sys.  In my view, that there is an underlying cause. You must update to win 8.1 as in itself, this will probably fix this driver.

    In the meantime, I would like to run a file system check

    Please run a check of system files (SFC) 


    All instructions are in our Wiki article below...
    If you have any questions please ask us for .

    Check the file system (CFS) Scan and repair system files

    If that returns with no violations found I would then run driver verifier

    These accidents were related to the corruption of memory (probably caused by a driver).

    Please run these tests to check your memory and find which driver is causing the problem.


    If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

    Since then, it is more likely to be a pilot run everything first.
    1-Driver Verifier (for full instructions, see our wiki here)

    If the auditor does not have the issue we move to it.

    2-Memtest. (You can learn more about running memtest here)


    If you cannot start after you have enabled the auditor reboot in safe mode
    In Vista & victory (F8)

    Co-written by JMH3143

    .

  • Windows 8 DPC_WATCHDOG_VIOLATION (mainly at boot)

    Hey all,.

    I bought a couple of Windows Mobile, 8 weeks. I had problems with this, but I'm not in a position to request a refund. It seems that the violation of CPD Watchdog is a problem common to many users of Windows 8, so I was wondering if I could get any help. I especially get this error message when I connect firstly in the login screen hangs and BSOD appears. I enclose the link to my zip Minidump file.
    What is the problem? I desperately need help... Please let me know if you need more information.

    James

    These are almost all related to rtl8192ce.sys NDIS Driverr Realtek Semiconductor Corporation.  I would like to re - install the latest driver available.

  • DPC_WATCHDOG_VIOLATION in snapshots of Windows 8

    I still get error DPLC-WATCHDOG_VIOLATION at the end of a snapshot of Windows 8 (8.1).  The system reboots normally, and the snapshot seems valid (at least on the Actions Windows progress bar ends.  I can try taking snapshots and an earlier version of Windows (Windows 7 or XP), but I would like to know if someone else is learning it.

    Hello.  I joined the newly created - Tablet vmware.log (compressed) to the starting thread because I couldn't seem to change your request for any reason any.  This time there is no dump file product (that I could find).  However, I have noticed a very brief blue screen at the end of the snapshot process - where the screen is painted.  The VM of Windows 8.1 then restarted without error.

    What is a jmattson of 'lights '?

    I can confirm what you say in every detail.  As long as running the Hyper-V program in the Windows prompt a DPLC error occurs.

    However.  If your goal is to work with Hyper-V machines, that you have created, you can make a point of control of them before restarting the WS client. Those preserved through reboot of comments.

  • Upgrade to Windows 10 windows 8.1 on the Yoga 3 Pro

    Computer hangs when you try to upgrade to Windows 10 (the circle under the lenovo logo runs for about a second, then stops). After forced reboot, it is up to 8.1 Windows with error message:

    "We could not install Windows 10
    We put your PC in the way it was just before the start, install Windows 10.

    0xC1900101 - 0 x 20017
    "Installation failed during SAFE_OS with an error during the START operation.

    I tried the suggestions online for this error (turn off bluetooth/wifi, remove the USB devices, USB installation editing), but does not (or am I doing wrong?),

    I suspect this is related to the fact that I can't boot from the Windows 10 USB installation disk either.

    I also tried all combinations of UEFI/fix/legacy boot in the Bios. The only time wherever I was able to boot from USB Windows 10 was boot inherited, but boot from USB via UEFI rather than inheritance. It has since stopped working, even after complete healing of Windows 8.1.

    I was able to upgrade once after doing factory reset with the Lenovo USB. Wanted to clean install Windows 10 next, which I was able to boot Windows USB 10, but the installation failed for some reason any (i.e. obtained even hang up to restart the computer, as described above). Since then, I have not been able to start from USB Win10 more.

    Had to do another factory reset to 8.1 original, but were unable to move to 10 from there either, despite various attempts.

    After more than 10 of your time attempts updateing/installing, I am very disappointed by the experience (lack of)! Never had this problem with another machine. (and for that matter, what type of contact system stupid lenovo use? When you try to contact them about this, the text field has not even correspond to the description of the problem!)

    All tips and suggestions on how to do a upgrade or install own would be very useful! If you need more details, please ask!

    For posterity, I was able to install Windows 10 now after that I followed the DPC_WATCHDOG_VIOLATION error and put quick start stop in the power settings (according to here https://www.youtube.com/watch?v=7GY-laVVzdA) and update some drivers who were missing. Can't really imagine it as the only reason for which, since before he had failed several times to install on a complete factory reset and completely update of windows, which were not lacking drivers, then perhaps it was really quick start bit?

    However, I get this DPC_WATCHDOG_VIOLATION constantly on 10 Windows, making it virtually unusable PC. Open a separate question on that.

  • V7-482PG-9617 10 Windows crashes on sleep

    Hello... I tried to search the forums and do not see an answer to this. My apologies if someone has answered this question and thank you if you could point me in the right place.

    I had an upgrade my V7-482PG-9617 to Windows 10. Whenever I install, automatic updates would go and I would get a dpc_watchdog_violation every time that it starts. I ended up doing a clean and rodding installation drivers from the Acer support page in the machine before I let it reboot. That seems to have solved the problem at first, but now when he sleeps on the battery, it crashes. I tried many settings in the power settings, but can't seem to bypass.

    Does anyone else have this problem? Solution?

    [deleted inappropriate content]

    I'm a little late, but since you have a mobile haswell 4500U, you must use the the Interface Windows driver Intel Managemnt 8.1 as a workaround so it will not crash when you put it to sleep or he falls asleep. It's a problem of incompatibility/known w / driver Intel MEI version 11.x (and driver Turbo Boost).

    http://www.Acer.com/AC/en/us/content/drivers

  • Software LifeCam does not install on windows 7

    I used the same webcam for some time without problem.  It's a lifecam Vx-5000.  I used windows 7 ultimate and everything on the camera worked fine.  I've updated to windows 10 and of course it wouldn't work until I updated the drivers.  What I did.  I discovered that my network card is not a windows 10 driver and it crashed my computer with a DPC_Watchdog_violation time to time.   So, after trying and not figure out how to stop the BSOD I returned to windows 7 as Windows 10 allows you to do.  Once I have with retroactive effect to the windows 7 however.  I find that my camera is not working.  The microphone records as a device for audio input and functions normally.  However if I try to turn on the camera Skype answers over almost immediately.  Whenever I try to install the Lifecam software, I get the error of KB953691.  I tried all methods of fixing the issue is offered when the error code is sought without success.  I even tried to uninstall Lifecam, but I gives me the error that the installation package is not valid for the product, when I try to look for the MSI file, I can't find it anywhere.

    Hello

    Please keep us updated.

    Please see article and advice in it.

    Troubleshoot failures to find the new LifeCam hardware

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

    I hope this helps.

  • CPD Watchdog Violation Windows 8 [SOLVED]

    Hello!
    Occasionally I get the DPC_WATCHDOG_VIOLATION. Used when I play games. I use the laptop Asus n56vz and SSD OCZ vector 512 GB. I tried to update all drivers, BIOS, and Firmware of the SSD, but I still get the error.  I have used NOD32 Antivirus I uninstalled it but still have this error.

    Here's the C:\Windows\Minidump:

    https://SkyDrive.live.com/redir?RESID=E828D84DFAA824B6! 147 & authkey =! ADvi_ktAtwgPGMg

    Thank you for your help.

    I think the question can be counted as solved now. No more BSOD after installing the seller of the laptop ASUS NVIDIA driver.

    Thank you all for the help.
    I hope that this thread will also help other people.
    I can't mark my reply - as the answer to the Question. So I only renamed the 1st post.

  • Windows 8 freezes during or just after the start

    Hello

    I have a machine to window 8 which has been upgraded to windows 7 and worked perfectly well for several months until last week. It started to freeze during or just after the start in a minute or two.  It works fine in safe mode

    • I tried a lot of things already that is disable all non-Microsoft services, and that did not help.
    • Refresh the PC while keeping the files and settings and who also did not help.
    • Tried sfc/scannow, which did not help
    • Virus search

    Restarted a few times OS and said, I met dpc_watchdog_violation. But no other information.

    Advise the pl

    Hello

    I don't know any list of the differences between starting and Normal. I think you can try to disable Microsoft Services in MSConfig, but it's just a guess.

    There is a box to check in MSConfig to create a log, but I know nothing about it, or where it would be stored.

    If everything worked at some point, there must be an update of a certain type involved...

    I suggest that you try to post the question to the TechNet Forum... Anyone know of this problem...

    http://social.technet.Microsoft.com/forums/en-us/w8itproperf/threads

  • Windows 8 - repeated screens CPD Watchdog Violation blue

    Separated from this thread.

    Hello

    I have the same problem also when I use MSI afterburner windows crash and displays the DPC_WATCHDOG_VIOLATION message.

    Can u please help me

    THX

    Hello

    Well check with MSI Support, their drivers and documentation online and ask in their forums
    on the known issues and solutions. Obviously you shouldn't use MSI Afterburner if she is originally
    blue screen problems, the cause is obvious.

    Support MSI
    http://www.msi.com/index.php?func=service

    MSI - Downloads (drivers and BIOS)
    http://www.msi.com/index.php?func=downloadindex

    MSI - Forums
    http://Forum-en.msi.com/

    MSI - Service
    http://us.msi.com/index.php?func=service

    MSI - Live Update online
    http://www.msi.com/index.php?func=downloadindex

    MSI - Contacts - USA - North America value
    http://www.msi.com/index.php?func=HTML&name=aboutus

    ===============

    Check out these resources: the real solution will probably come from MSI.

    Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">
    http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspx

    BBCode: 133 0 x 00000133<-- read="" this="">
    * 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-

    Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
    According to needs). Win + D key calls the office and using Win Key active / disable the Office
    and the splash screen.

    Translate Windows 7 methods and use them on Windows 8/8.1

    Resolution of the blue screen in Windows 8/8.1 errors
    http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
    Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
    a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
    steps of shooting.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available from the OneDrive or other
    file     -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    Adding files to your OneDrive
    http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

    A disk - sharing files and folders and change the permissions
    http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

    ZIP or download the content of the C:\Windows\minidump

    Use OneDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    =======================================================

    Run checkdisk (chkdsk /f r)

    Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
    http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

    How to check a drive for errors with "chkdsk" in Windows 8 and 8.1
    http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

    Redesign of chkdsk and the new model of health NTFS
    http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

    -----------------------------------------------------------------------------------------------------

    It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

    This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
    Microsoft drivers - update those without drain in their names (and BIOS and chipset).

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now click on
    Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
    Click on - uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Windows 8/8.1 - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Windows 8/8.1 - Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    Windows 8/8.1 - what happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    ========================================================

    Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
    (new installation remove all).

    How to restore, refresh or reset your PC (Windows 8/8.1)
    http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

    How to update Windows 8 & 8.1
    http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

    How to reset Windows 8 & 8.1
    http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

    If you need a USB Flash Drive recovery or other methods:

    How to create a recovery USB in Windows 8 & 8.1

    http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

    How to start on the "System Recovery Options" in Windows 8 & 8.1
    http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

    Boot to the tip "Startup parameters" in Windows 8 & 8.1
    http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

    ----------------------------------------------------------------------------------------

    After doing ALL the updates you can and if the problem persists, run DriverVerifier.
    (Remember to use the methods Windows 8/8.1 displayed at the top of the first answer above).

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve the problems of driver in Windows Vista or 7.
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with
    MyEventViewer at the blue screen.

    If the driver verifier creates a minidump upload it and post the link here so we can analyze.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • DPC violation watchdog 8.1 windows

    Hello

    I got a BSOD error first time. I was running Skype call and online software. Here is link to a disc.

    http://1drv.Ms/1z2MB9H

    Best regards, Shehzad

    (Moved to repair and recovery)

    Hello

    Error checking 133, {1, 1e00, 0, 0}

    Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 125e0)

    Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.
    No other real help in the minidump.

    BiosVersion = Version 6.80
    BiosReleaseDate = 25/06/2013
    TOSHIBA = SystemManufacturer
    SystemProductName = PORTEGE R930
    Family = 0000000000
    SystemVersion = PT330V-0VX0DVA3
    SystemSKU = PT330V
    TOSHIBA = BaseBoardManufacturer
    BaseBoardProduct = PORTEGE R930
    BaseBoardVersion = Version A0

    1. check with Toshiba Support, their drivers and documentation online and ask in their forums
    on known problems. Updated BIOS, drivers of low level chipset and on-board major
    and drivers of separate devices (see methods of updating driver below).

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    2 use ALL methods in the troubleshooters below.

    3 if necessary execute DriverVerifier to see if it can indicate a CAUSE (see methods of DriverVerifier
    below).

    ========================================

    Check out these resources:

    Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">
    http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspx

    BBCode: 133 0 x 00000133<-- read="" this="">
    * 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-

    Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
    According to needs). Win + D key calls the office and using Win Key active / disable the Office
    and the splash screen.

    Translate these methods of Windows 8 (there is little real difference):

    Resolution of the blue screen in Windows 8/8.1 errors
    http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
    Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
    a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
    steps of shooting.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    =======================================================

    Run checkdisk (chkdsk /f r)

    Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
    http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

    How to check a drive for errors with "chkdsk" in Windows 8
    http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

    Redesign of chkdsk and the new model of health NTFS
    http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

    -----------------------------------------------------------------------------------------------------

    It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

    This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
    Microsoft drivers - update those without drain in their names (and BIOS and chipset).

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now click on
    Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
    Click on - uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Windows 8 - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Windows 8 - why isn't Windows find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    Windows 8 - what happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    ----------------------------------------------------------------------------------------

    After doing ALL the updates you can and if the problem persists, run DriverVerifier.
    (Remember to use the methods Windows 8 posted at the top of the first answer above).

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve the problems of driver in Windows Vista or 7.
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with
    MyEventViewer at the blue screen.

    If the driver verifier creates a minidump upload it and post the link here so we can analyze.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for