DQ965GF motherboard headers

Similar Questions

• Mac pro tech specs and how upgrades work apple hardware?

  Hello guys,.

  My colleague from modding pc just got a mac pro and I have just read his record about 5 minutes ago and I discovered there xeons, ram ecc and over-pants on it. I've never touched before apple products, and I don't know how they work. So I came here for your help.

  I see similarities to the msi with the mac pro vortex. Motherboards are the same? even if they are, does anyone have full features on the mac pro?

  -The moterboard chipset?

  -Which plug to use?

  -Number of pcie 16 x housing?

  -Output power of psu Board?

  -Number of fan on the motherboard headers?

  -Support hotswap and raid?

  -MOST IMPORTANT: how to enter the bios?

  Main question:

  I want to try to Exchange and equip inside the mac pro with what is on the test bench for a project at random and to see the scores of benchmark on apple os and etc will this work? (As I said it, a 0 on the orders of apple experience)

  * material I want to Exchange in the mac pro: there is a 980ti of reference and sticks of ram ddr4 hyperx to the test

  What model Mac Pro?

  How to identify models Mac Pro - Apple Support

  Start is a small trash can black or silver 35 lb round?

• connections on the front 9150f Panel

  I recently had a few replacement cable on my 9150f, which required to unplug some cables for the ot of the way. After putting everything back together, I lost the use of the slots of the façade as well as the card reader usb memory front. While I was being cautious, I must have done a mistake reconnecting anything. Could someone please advise on what usb connection on the motherboard should go to what cable? Thank you very much!

  The exact location is okay, as long as 4/5-pin connectors go to the 'black' motherboard headers match and 8/10 pin connectors go to headers corresponding motherboard 'white '. These header is all labelled "F_USB #

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• S5120Y wiring diagram business Slimline

  I am repairing a HP Pavilion Slimline of S5120Y. I've been looking for a case wiring diagram Slimline help identify the correct façade component wiring to install on my card mother ASUS P5G41T-M LX Plus. I have the diagram for the motherboard but I assure you linking the son corectly to avoid damage to the Board or components.

  Someone has a link to it would be well appreciated.

  Your 4-pin Cable from the HP 6-in-1 reader is a USB 2.0 connection.
  WATCH POLARITY - POWER, GROUND.
  You can damage the motherboard USB IC, Surface Mount; OR 6-in-1 Reader.

  HP has a bad habit of using various DIY cable on their front panel wiring
  to support a variety of motherboards.
  Largely because of the lack of USB 2.0 on motherboard headers, there are a dozen years.

  * You must see their case computer a000 wiring! * (I have one, adaptation to the standards of Intel).
  ===
  The optical CD/DVD may be a LED or a simple switch. Was it connected initially to disk or motherboard?
  Are not supported on Asus motherboard...

• HP s5503w, Windows 7 ultimate 64-bit. Want to connect a player card on the motherboard.

  New to the Forum and looked but cannot find an answer to my question.

  I have a desktop HP SlimLine s5503w; what I need an answer, that's where on the motherboard I plug the card reader I have. Searched both here and on the web with no luck. A friend gave me a card reader and thought it would be good to use on the 5503. Anyone with an answer? Thanks in advance for your help.

  Roger

  Here are the specifications of your desktop HP Pavilion Slimline s5503w and its card mother M2N68-(Narra5). Based on the specifications, the motherboard has four headers USB as shown below;

  

  As long as the eMachines card reader is USB based, and uses the same pinout as the card mother HP, connect the drive to one of the 5-pin headers should work. Make sure that the four pins that have sons, go on the 4 pins on the motherboard... with the 'empty' PIN to the empty space.

  Also note that there is nowhere to get this card reader into your computer.

  Please click the White Star of KUDOS to show your appreciation

• HPE 1170 uk: card Wintv... Where it connects to the motherboard?

  I have a hp pavilion 1170 uk Office http://support.hp.com/gb-en/document/c03023321

  the black cable of the wintv card came loose from the motherboard. It is a 4 pin connector. I can't for the life of me see where it connects to the Board of Directors.

  can anyone help?

  Yes.  This looks like a USB connector.  Looking at your link, and then on the motherboard page support page - port USB headers are at the bottom of the card mother and labeled F_USB1, F_USB2 or F_USB3.  The "strong" part of the form passes over the location of the empty spindle to align the other four pins to the correct location.

• Workstation HP xw6200 motherboard: connecting HDD SATA 2 hp 08B8h

  Hello

  I want to connect a second hard drive to my XW6200.  On Tuesday, wb2001 kindly gave me the login procedure:

  "The manual shows that you can have 2 Sata Serial ATA drives. See the manual.
  Refer to article 69 pg 19 and 20 for the Sata data headers. Refer to pg 100
  for the hard drive Bay.
  The PSU has 2 Sata power cables, so all you need is a Sata data cable.
  Just imitate existing lead. »

  Unfortunately, when I tried to put it into practice, I discovered that Item # 19 of the SATA was used by my CD/DVD drive (it could be question No. 20, I'm not sure). I would like to know what are the options that I have now.

   

  Thank you very much for your help.
  

   

  Boyar
  

   

  
  

   

  
  

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]

  Hello

  I see that your motherboard has a PCIe slot - x 8 on this subject. Is currently available? If so, you could purchase a controller card SATA PCIe - x 8 and that connect your extra hard drive.

  If you don't have an available PCI slot I recommend connect the DVD player to the PCI SATA controller card (you need to buy) and plug your HARD drive into the motherboard SATA slot currently used by DVD.

  Another alternative is to buy an external SATA USB2.0 Converter and use your HARD drive as an external drive instead.

  Thank you
  M

• Someone at - it a little luck replacing motherboards

  I'm fixing a pc of neighbours and the need to buy a new motherboard. I not replace it with a HP required shit, seeing as how many people have the same problem.

  This is a:

  HP Pavilion A6403w

  Motherboard: MCP73M01H1 (Napa)

  I need a Board that fits the case and connectors for the façade.

  Someone had a bit of luck to get another more reliable mobo to work in this model?

  Need you a micro ATX (9.6 "x 9.6") to fit in the case. USB Sockets at the front need to connect to the USB headers on the m/b replacement. Audio jacks on the front might be a problem. The biggest source of problems will be the fact that the installed HP OS will stop working. In addition, the HP Recovery partition and discs will be of no use because they will refuse to install with a non HP m/b in place.

  Frank

• How to determine the model of motherboard?

  Hello

  I bought the motherboard Poweredge R410, but I am in doubt, if that's really the R410. I want to find a compatible power supply and that I have read the manual, I noticed that power headers are labeled J20 and J29 to the 8pin and 24pin respectively headers that don't match not with labels on my Board (J23 and J24 as you can see in the picture below). On the other hand the R510 manual has same tags like my Board... Is it possible I have a motherboard instead of R410, R510?

  

  

  If you would like more information or more pictures please let me know.

  Thank you in advance.

  The part number is 3GTGH, which if search you comes back as a card mother R410.

• 2013: MacBook Pro replacement motherboard or not

  Brain Trust,

  I need some advice here.

  I have a 2013 fully bridged on (500 GB SSD, 16 GB of RAM) MacBook Pro and the sound from the speakers awefully distorted.

  I did all the regular troubleshooting inclusing a clean installation of the operating system, applications 3rd party and the problem persists.

  The distortion is NOT dependent on volume, it is still there, as if the sound is cut at all levels.

  Now, the headset on the port is perfectly clean, so I think I have it narrowed down to the (material) built-in drivers for speakers. I went to the Genius bar and they agreed and recommend a motherboard replacement. Since I have a month left my Applecare, I could do it, but I hesitate. Professionally, I rely heavily on my machine on a daily basis, and I fear that a machine otherwise perfect with zero problems (other than the problem of speaker) will be messed up.

  What is your experience with a motherboard swap and what do you recommend I do? Live with the distortion and contemplate a great Macbook, or opt for repair until the warranty runs out. NB, I have a very old Macbook that I can use for the week or I'll have to miss my machine.

  I'll answer my own question:

  Do it! I had a fantastic experience! Not only was my main problem, distortion in speakers, correctly diagnosed and resolved, since engineering also saw a small white spot on my screen (who had been there forever), I also had a nine screen. Not only that, I got a new valve and bottom plate, so after 3 years of intensive use, my Macbook Pro looks like new again. Total costs under Apple care program: $0.

  It's really the only problem with Aplle MacBooks: my excuse to buy a new went through the window, this machine will last me a few years ago!

• Mac Book Air, failure of the motherboard

  Hi, I bought Mac Book Pro, a year and months back, yesterday, battery is down to 5%, so I continued to support, as I am studying end nyt I closed my MBA. Next day morning day when I tried to show him a folder with question mark symbol flashing. then I tried top in SafeMode it dint'showed hard drive. While I've taken at the authorized Service Center then they said his mother board failure and asked me to pay 42000INR. Is it really motherboard problem? What are the other options of best for me? and this is the price charged for the motherboard, even as they say? can I have any apple legal right againt for replacement?

  You can test it by connecting via USB, a boot disk.  If the Mac recognizes, the Mac, boots, then the internal drive or connection that is the problem.  Is it is not recognized, then it may very well be a logic card problem.

  Ciao.

• PowerMac G3 minitour - identify a 333 MHz motherboard

  When I bought my first PowerMac G3 Beige minitour, I didn't know that, for what I was going to use it, I needed the version of 333 MHz, and one I bought turns out to be a unit of 266 MHz. Subsequently, I found a machine at 333 MHz and it's all configured and up and running. Now I want to transform my machine 266 a 333 to have as a backup.

  So, what I am wanting to know is this...  If I replace the motherboard on a 333 266 a, that is all that is necessary to make a machine 333?

  In addition, the part Apple no on my 333 motherboard is 820-0991-B. This means that if I find a motherboard with Apple no. 820 - 0991 - B, it will be a motherboard 333 MHz or there something else involved in the equation?

  If no, is there any there any identification #s on the processor itself I need to know, from (IIRC) it connects?

  Thanks for any help,

  Tom

  The A, B, and C after the logic card number denote a logical Board review, not a processor speed. You want a Rev b or C - Rev A is supported only as a single unit by ATA cable so that B and C models support two - nice addin fo additional drives.

  Otherwise, the card G3 Beige of logic in the framework should be fairly generic. The G3 processor is nested, so it is easy to change the processor. One of my Beige G3s (both are rev C) began as a 300 mHz machine and I upgraded the processor at 500 mHz. You can just install a faster processor into the processor socket for a faster Mac - no swaps logic card are required.

  Other factors are controlled by a single processor jumper block. See this diagram:

  

  Is Apple is easy with a single base card which can be equipped with different CPU speeds using these riders. The setting for the jumper blocks are here:

  https://Web.archive.org/Web/20000505093026/http :// www.bekkoame.or.jp/ ~t-imai/g3a e1.html

  More overclocking here:

  http://lowendmac.com/1997/overclocking-beige-Power-Mac-G3/

  People get into trouble, try to change the bus speed 67 mhz by default and the PCI bus to something higher, especially of you had a sort of installed PCI card. However, you can leave these single speeds and still make some minor adjustments to only the CPU clocking riders.

  Apple had factory no block CAP that set all the parameters for a model at the same time. Overclockers remove the CAP from the factory a piece and use of small riders similar to those used on ATA drives (2mm I remember well), or simply to jump the connectors exposed in the block from the factory with a little short of gold thread.

  It's been long since I was inside my two beasts of Beige, but if you have any other questions, I can possibly to jog my geriatric memory of these things.

• If View | Headers is set on Normal but forwarding emails always send the header information, what it takes then try to stop him?

  When I send any email it adds the header at the top of the email to transmit information. According to other posts so I put in view. Headers | Normal, that they will not be added. It does not work for me. I tried setting to view | Headers | All and then return to normal. No change. Using Thunderbird version 38.3.0 on Windows 10. I can select and remove the information from the header manually, but it's a pain. The only other option is to send as an attachment that does not add the header information, but prefer not to use this method. Any suggestions? Thank you.

  It's 5 lines. I have a lot of people who want to be part of the sent emails, but complain about the shipping info. The 5 lines personally doesn't bother me. I miss understood believe the news of transfer, 5 lines may be hidden if notice | Headers was set to Normal. I have to select and remove before the transfer or copying some individuals simply not in on emails transferred. Thanks for your help Zenos.

• JavaScript for the application is not able to read any of the headers in a HEAD request

  The answer is to send the Access-Control-expose-Headers in a list separated by commas. For example:

  Access-Control-Expose-Headers:"Total-Site-Count, BIOGRAPHICAL-Site-Count data, NWIS-Site-Count, STEWARDS-Site-Count, STORET-Site-Count to the Total result Count, BIOGRAPHICAL-result-Count, NWIS-result-Count, STEWARDS-result-Count, STORET-result-Count, warning FATAL ERROR"

  lies in the response as headers our headers themselves.

  However, none of them don't pick themselves up when running getResponseAllHeaders or using getResponseHeader (xxx).

  I realized that it was. A header from was "FATAL ERROR". This space seems to be causing the problem. When I changed the server to set the "FATAL ERROR" header, firefox worked perfectly

• How to set up single-line message headers?

  Previously, in the message display area, I had configured Thunderbird so that a message appears that the subject of the message in the message header section just above the body of the message. But I just upgraded to to 38.1.0 and now I have in reserve, [address], in the header box, although I've seen-> headers-> Normal (Compact) set.

  Please tell us how to get back to the option just to display the subject line. Real estate vertical display is much too precious to not having the capacity of the old view of a single line.

  Thank you
  [email protected]

  Install this add on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/?src=HP-DL-featured

  The normal headers view removes the routing information only. It has nothing to do with what you are trying to accomplish.