Drag and drop does not - symbol disappears when I try to drag

Similar Questions

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Windows Defender does not work. When I try to turn it on, I get the message "not responding".

  Original title: Windows Defender

  I have Windows Vista and my Windows Defender will activate/doesn't not work.  When I try to turn it on, it responds by saying: 'it is not responding' and stops automatically.  I tried to re - install & who did not work.  Any ideas.

  Hi lskdjfoie,
   
  What have you tried to reinstall? Windows Defender or other programs?
   
  I suggest the following steps and check.
   
  Step 1:
   
  Usually if you have a third-party security software installed, Windows Defender would not work. I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If this does not help, I would say you scan SFC on your computer and check if Windows Defender works fine.
   
  Step 3:
   
  If none of the steps helps create a new user account and check if the problem persists.
   
  Let us know
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem slider disappears / Drag and Drop does not work

  Hey everybody,

  I have an urgent problem.

  Three butterflies are supposed to be slipped into an object.  My custom cursor is a kind of net to catch these butterflies.

  
  For the cursor, I have this code:

  cursor_mc.StartDrag ("true");
  Mouse.Hide ();

  My drag and drop code is:

  cursor_mc.addEventListener (MouseEvent.MOUSE_DOWN, startMove);
  redbutterfly_mc.addEventListener (MouseEvent.MOUSE_DOWN, startMove);
  violetbutterfly_mc.addEventListener (MouseEvent.MOUSE_DOWN, startMove);
  yellowbutterfly_mc.addEventListener (MouseEvent.MOUSE_DOWN, startMove);

  cursor_mc.addEventListener (MouseEvent.MOUSE_UP, stopMove);
  redbutterfly_mc.addEventListener (MouseEvent.MOUSE_UP, stopMove);
  violetbutterfly_mc.addEventListener (MouseEvent.MOUSE_UP, stopMove);
  yellowbutterfly_mc.addEventListener (MouseEvent.MOUSE_UP, stopMove);

  
  function startMove(evt:MouseEvent):void {}
  redbutterfly_mc.StartDrag ();
  cursor_mc.StartDrag ();
  violetbutterfly_mc.StartDrag ();
  yellowbutterfly_mc.StartDrag ();
  }

  function stopMove(evt:MouseEvent):void {}
  redbutterfly_mc.stopDrag ();
  cursor_mc.stopDrag ();
  violetbutterfly_mc.stopDrag ();
  yellowbutterfly_mc.stopDrag ();
  }

  But when I'm clicking on a butterfly my cursor stops to move and stay on the throttle position, that I'm dragging. After a fall, there is no cursor at all so we don't know where the mouse is currently located.

  Anyone know why it does not work? I am currently working with a mousefollower, because right now, it's the only way it works...

  The mousefollower code is:

  addEventListener (Event.ENTER_FRAME, enterFrameHandler)

  function enterFrameHandler(event:Event):void {}
  cursor_mc.x += cursor_mc.mouseX / 4;
  cursor_mc.y += cursor_mc.mouseY / 4;
  }

  But now I have the problem that only the Yellow Butterfly moves even if I'm clicking on red or purple...

  Please help me! Thank you in advance!

  Try to use the following code to manage the cursor_mc...

  Mouse.Hide ();
  cursor_mc.mouseEnabled = false; keep the cursor to interfere
  this.addChild (cursor_mc); to place the cursor at the highest level

  function moveCursor(evt:MouseEvent_=_null):void {}
  cursor_mc.x = mouseX;
  cursor_mc.y = mouseY;
  }
  stage.addEventListener (MouseEvent.MOUSE_MOVE, moveCursor);

  moveCursor(); to locate initially mouseover

• Drag and drop does not not in MacOS 10.7.5 EP 12 (Lion)

  I "copied" the icon of the editor of Photoshop elements 12 to the docking station.  When I drag and drop a photo (for example, JPG or NAVE) icon to the element editor icon in the dock, nothing happens - elements does not open.  The photo icon just "pops" in the folder I was dragging it since.  All previous versions of the components I used have behaved like any other Mac application and opened the photo (with a NAVE, the photo opened properly in the cab file).  Other Mac applications such as preview, open a file very well when she I do drag and drag the file on the application icon.

  I tried the same experiment with icons of the editor and organizer in my Applications folder and got the same results (the application does not open the file).

  I've skimmed through the preferences of PE to see if there was some kind of new preference for 'drag and drop' behavior, but found nothing.

  So, what don't get me?  How can I get 12 PE to open a file when I drag and drop a photo on the editor icon (or if I really, the Organizer) icon?

  Drag & drop works fine for me on 10.9

  Maybe you copied the wrong icon, the application is located in the support files.

  Applications > Adobe Photoshop Elements 12 > support files

  Locate the editor of Photoshop elements 12 in the Support files folder.

• Drag and drop does not not on Windows 7

  Recently, it seems that I can just drag and drop files from anywhere within windows 7. I have the ability to right click and drag, but then I have to check his location with a 'move here' that is enough time especially when movement music titles. Any suggestions as to why it suddenly stopped working?

  Thank you very much
  Steve

  Hi Steeevb,

  What happens when you attempt to drag and drop?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Dreamweaver CC 2015.3 interactive images - Hotspots do drag and drop does not work

  Dear all,

  I use Dreamweaver CC 2015.3 and try to use the Image Map option. I'm not using it in Liveveiw so there must be another problem.

  I have inserted a picture and give MapId image2. After that, I tried to drag and drop all three circle, polygon, and rectangle. Nothing happened.

  No map tag is packed. Nothing happens. What is the reason?

  Thank you

  Amir

  mamirs wrote:

  ... I have inserted a picture and give MapId image2.

  As much I know "MapId" is not an attribute of html for creating / using the clickable images.

  An image map using an attribute called 'well' in the tag which must match the attribute "name" of the

  To use the image map tools...

  1. place an image into your page (the tag should be used, image maps do not work on css-background images)
  2 single-left-click on the image in Design view to select it (a black box appears). If you see a blue border and a tab, when you click the image, you again Live View Editor and click on the triangle next to the Code, Split and buttons direct to change design

  3 left - click the shape you want in the Properties window to select the tool

  4. go to the image, click and drag (to a circle or square) or click on several points (for the polygon tool) to create your interactive image tag
  5. change the name of the card on the card Properties window

• bbUI.js and jQuery UI drag and drop does not

  Hey guys, I'm lost trying to integrate a drag and drop functionality using jQuery in my bbUI.js application. I don't know where to put my init code that makes the draggable element. I tried just this feature in my existing project workflow, but that doesn't seem to work. The elements are not movable. I don't want to clutter the page problems of github with a request for assistance. Thank you!

  In case if someone seeks this I work.

  
  
  
  
  

  $('#canvasphoto').droppable ({tolerance: 'fit'});

  $(«#selectiondrag»).draggable({)
  tolerance: "touch."
  animate: true,
  Scroll: false,
  containment: $('#canvasphoto'),.
  return: false,
  Drag: function() {}
  var Startpos = $(this) .position ();
  $("div#start").text ("START: \nLeft:" + Startpos.left + "\nTop:" + Startpos.top);
  }
  });

  This made the turn (move a div in a div)

  I have a background image and a div (405 x 405) as an example that I can move left or right (but the div allows you can also move upwards or downwards)

  I don't know that if I really need the areaselect, just let him in.

  jQuery-ui I've selected only draggable/resize/move and the rest that I've left out.

• Drag and drop does not

  Since the upgrade to El Capitan, I can't drag and drop correctly to my reader network backed within the same window of the finder. Now the file on the device of destination for a while used to view lower-level items such as drives, folders, etc. subfolders. Now it goes only to the extent where the player so I can't drop the file where I want. Now, I need to copy and paste the file or use the finder windows 2, for the origin and destination.

  This used to work perfectly on the mavericks.

  I'm on Macbook Air (mid-2012)

  El Capitan 10.11.4 OSX

  By default, in my view, spring-loaded folders have been disabled. The setting is now in the prefs system of accessibility under the mouse and Trackpad. Make sure that this option is always enabled.

• Drag-and - drop does not 2012 and Win 7

  This used to work, but somewhere along the way, I lost the ability to drag and drop access paths and excerpts from LV on a LV block diagram. Has anyone else seen elsewhere? I don't think it's a matter of windows. And it works in LV2011.

  
  

• I get the message "device USB has malfunctioned and windows does not recognize it" when I connect my Ipod touch to load or put music on it.

  Original title: legacy A USB has malfunctioned and windows cannot recognize him does that mean?

  I get this message when I connect my ipod touch to load or put music on it. It worked before on both of my computers and I have not changed anything on one of them. I even bought a new usb cords just in case that was the problem, but still no luck. the funny this is that the battery in the corner of the ipod looks like he got some fees, but I'm not sure because of the message. I soft reset it and hard reset it I tried to install the new updates, but it is said that it is up-to-date. It is therefore unknown on my computer device how do I? someone please help.

  Hello
   
  The problem is specific to the Ipod?
   
  I wish that you follow all the steps in the article apple to fix the problem.
  http://support.Apple.com/kb/TS1538?viewlocale=en_US
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Adobe Presenter 10 Drag and Drop questions - grey area only when you try to create

  Hello

  I try to create drag and drop questions in presenter 10 and after clicking on Add Question-> drag-and - drop, the new window opens but where I should be able to define the questions etc., the screen is just gray. Have the same problem on the three other systems as well.

  Flash is updated to the latest version as well as presenter 10.

  Oddly the Flash version installed is 15, but a right click in the grey box shows me version 11.

  Any ideas?

  Thank you

  Chris

  Just in case someone else has the same problem, a cat with Adobe brought the solution:

  On the gray screen, right click and go to global settings

  Go to the Advanced tab

  Scroll down and click on "trusted location settings.

  In the window 'Trusted location settings', click on 'Add' at the bottom

  Click on "Add a folder" and select "Local disk c".

  Click "Ok" and confirm on the "Trusted location settings" window

  Worked for me (on three different machines) like a charm!

• Why my HP printer does not print gibberish when I try to print information from this forum?

  Why my HP printer prints on gibberish when I try to print information from this forum and how do I fix this?

  Hi there dafoster,

  I recommend trying another web browser to print for beginners, that the issue could be the browser.

  If this does not help, I would uninstall the printer driver and put it back.

  Here are links to help with uninstalling: uninstalling the printer software

  Reinstall: e-all-in-one printer, HP Photosmart 7525 drivers

  Make sure that you restart your computer after uninstalling.

  I hope this helps!

  Take care

• table or view does not exist error when you try to generate tables of database online.

  Hello

  I use Jdeveloper 12 c and is trying to generate tables of a database in offline mode, I created, for a connection of database online. The error message that appears is:

  java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist.

  More information:

  The database I use is Oracle11g Database Release 2. And I get a warning saying that the 12 c functionality will be lost when generating an 11 g database.

  In addition, the problem occurs only when I have foreign key constraints in my table. All the other tables that have no foreign key constraints generates very well.

  Any ideas why this happens?

  Thank you!

  Instead of directly generating the DB, generate a sql script. Then, you see the generated statement and can run the script using a db sql worksheet.

  If you get the error, you can view the script here.

  Timo

• My Windows Update does not work. When I try to access it, a box flashes on my screen, but I can't access it. I tried to use Windows Update via on line, and the same thing happens. Help!

  Too bad.  I managed to do the work.  I will now reboot and see if it solved the problem.

  OK, I restarted.  Always impossible to get Windows Update to happen on the screen.