ZTE open not light unless it is connected to the USB power source.
Even with the battery fully charged, my ZTE open never turn on unless it is connected to a USB power source. Once connected, it can be started, behaves normally and can be disconnected.
You should contact the owner of the eBay store in this case.
Tags: Firefox OS
Similar Questions
-
Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.
Disconnect all USB storage.
Run this tool by do right click and choose 'run as administrator '.
Of course, all first extract it:
http://www.Uwe-Sieber.de/files/drivecleanup.zip
If your XP is 32 bits, use the Win32 folder.
Reset.
If you still can't find the drive, assign it a drive letter in disk management.
-
Devices not recognized unless it is connected through a USB expansion port
Came to use a scanner that was not used for some time and unrecognized device. Tried reloading drivers, but still no good. Bought the new scanner/printer combo, but not recognized after loading software. Finally managed to make it work via WiFi. Thought, I'd better try another material... iPOD touch... "unrecognized ', Sony e-raeder..." not recognized '... panic! Has finally got the devices to be recognized by the connection via an expansion Belkin 4 port hub. Any ideas on how to solve the problem of USB ports not recognize my hardware when connected directly.
Have you tried to update the drivers from the chipset manufacturer of PC or motherboard manufacturers websites?
-
iPhone not charging when connected to the USB power adapter
Hello. I have a 5 s iPhone that I bought used a few months ago. It works very well.
Normally I charge it by connecting it to my Mac via a USB cable. Last night, I tried to recharge by connecting Apple USB power (also called a power outlet) adapter, which plugs into the wall, supplied with the phone. (Here's a link to the adapter if you are not sure what I'm talking about:.) When I connect the iPhone to the power adapter, I saw that the phone is charging - there was the small icon representing a lightning bolt near the battery of the iPhone.
However, when I woke up in the morning, the iPhone has been charged only 47%. I don't remember what the percentage was when I plugged into the power supply last night, but I don't think that the phone at that time was much less.
So I wonder: nobody knows what went wrong? Is there a way to make sure that the phone is loaded with the adapter?
Thank you!
M
If there is a symbol of bolt of lightning next to the battery icon, then the phone should be in charge. If it is charging a single source, but not another, then the problem is with the unpaid source. Try another adapter to confirm.
-
Elite 8100 desktop HP will not start when it is connected to the USB hub
HI, I have a problem with USB HUB (US221A, 2PORT USB 2.0 SWITCH) - powered by the computer. If the USB port is connected to the start the PC hangs at the HP logo screen - nothing works. If I press F9 during boot error 43 occur.
Looking for abios update.
-
My keyboard is not recognized by windows when connected to the USB ports.
My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.
Original title: keyboard problem
Hi Caragata,
Perform the steps from the link below and see if it works.
Tips for solving problems of USB devices
Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.
Good day!
-
LaserJet M1132 - scan not possible when it is connected to the USB of TimeCapsule airport port
Hello
I'm on Mac OS X Lion 10.7.4
Installed the latest drivers to date: 1.2
The multifunction printer is pluged on a TimeCapsule 7.6.1
Printing works fine.
But scanning is not possible using "HP Director" and with a brand like HP, I expect to have drivers with the message box from standard scanning Mac OS X (Capture of Image and therefore all software that use this API in the operating system).
This works very well with a printer of a different brand.
Is there a solution?
Thank you
Well Yes, by design, the USB port on the airport take in charge of printing, not for analysis or fax. I'm sorry.
-
I have a loading time long when I open firefox 35. Then cannot connect to the server, but I can open then well websites through my list of bookmarks. Trying to reinstall, didn't help, makes google my homepage in the options does not help.
It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.
See:
Make a check of malware with several malware scanning of programs on the Windows computer.
Please scan with all programs, because each program detects a different malicious program.
All of these programs have free versions.Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
http://www.Malwarebytes.org/MBAM.php - AdwCleaner:
http://www.bleepingcomputer.com/download/adwcleaner/
http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml - SuperAntispyware:
http://www.SUPERAntiSpyware.com/ - Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-us/default.aspx - Windows Defender:
http://Windows.Microsoft.com/en-us/Windows/using-Defender - Spybot Search & Destroy:
http://www.safer-networking.org/en/index.html - Kasperky free Security Scan:
http://www.Kaspersky.com/security-scan
Alternatively, you can write a check for an infection rootkit TDSSKiller.
- Utility anti-rootkit TDSSKiller:
http://support.Kaspersky.com/5350?El=88446
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
- https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware
Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.
- Download the full Firefox installation program and save the file to the desktop
https://www.Mozilla.org/en-us/Firefox/all/
If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.
- Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
- (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
- http://KB.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.
- Malwarebytes' Anti-Malware:
-
My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me
Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.
Where do you have the phone first?
-
I made an update of the system to the original settings and everything seems to go as usual. While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed. I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS. I checked and the BIOS is F.07 and the current version is F.41. I downloaded the update and begun the process of Windows. The system restarts to start the process, but when the BIOS updated starts I get the following message:
"A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply. Please connect the external power supply and then press Enter to continue. »
The computer is connected to the power of HP to the original address since it is the only way so he can turn it on. I tried removing the battery and from the update only the connected power and get the same result.
Either way, I tried to insert a different battery, I have more than one of these laptops.
Sorry
Please test the battery after boot press F2 HP Diagnostics
http://support.HP.com/us-en/document/c00821429
and calibration of the battery for laptop
-
My laptop does not recognize that anything that is connected to the USB ports
Help, please. My laptop does not recognize that anything that is connected to the USB ports.
Moved from feedback
Original title: problems with USB ports
Hi Alba.
1. who is the operating system installed on the computer?
2. What is the brand and model of the computer?
This issue may be caused if one of the following situations arises:
- The currently loaded USB driver has become corrupt or unstable
- Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
- Windows may be missing other problems hardware or software updates
- Your USB controllers may have become corrupt or unstable
- External drive can enter selective suspend
- Your PC motherboard may need updated drivers
I suggest to connect the USB device to a different USB port and check.
You can run the Fixit provided in the article and the Coachman.
Reference:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems
You can also try the steps in the link and check if it helps:
Reference:
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devicesNote: Apply to Windows 7 as well
Hope this information helps. Response with status so that we can help you.
-
Sound does not work when it is connected to the TV with HDMI
I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance
Hello gematz,
The sound does not work when it is connected to the TV via HDMI.
Go to start.
Type sound.
Click sound
On the playback tab, click with the right button on the HDMI interface, and then select set as default device.
If you do not see the HDMI, right click and select devices see off, then set as default.
I would like to know how everything goes.
-
Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.
Not Applicable
Hi StheveOses,
As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
(Works for Windows XP SP3 as well)
I hope this helps.
-
error message: "windows could not find a certificate to connect to the network.
My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.
Hello
Did you change your computer before this problem?
You can follow the procedure in the article.
Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
Alternatively, you can contact Netgear support to improve assistance in this regard.
Welcome to the NETGEAR support
-
I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.
Shaida is my wireless modem.
How to fix this problem?
Before the resumption of connection Internet worked normally.
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/870702
It will be useful.
Maybe you are looking for
-
I have many Notes (about 270 +) organised hierarchically in the new notes in El Capitan stored in iCloud. The export function only allows me to export one at a time. What is the best way (way Apple) sanctioned export all out of Notes in PDF or text s
-
Version history of Windows Vista displays update failed
In my history of updates, there are a lot of updates that 'failed '. I'd do anything thereon? If so, how should I do this?
-
Performance computer and software security
I've seen a lot of comments on computers with Windows 7, hampered by the host process for Windows Services, the Antimalware Service executable and other security products. Is there a straight answer about whether it is possible to stop these programs
-
I recently installed a new hard drive on my laptop, and Ive had an activation problem my windows 7 OS, it says that I cannot activate my OS on this machine, is it possible that I can still use my OS to a new hard drive? pls help
-
A WIN7 in virtual XP mode can join a network working group?
On a network of workstations XP working group and a Win 2000 Server, when I go into virtual XP on a new Win7 Professional workstation, I can not find the server on the network. In fact, I see no other workstations. The Win7 machine is on the network,