Drag Brush tool

Similar Questions

• Problems of brush tools

  I am creating a cover, and I shot a picture of fire (with a layer mask) on the top of my image of a man. Then, I searched my brush tool, double checked to ensure that it was black and white and then tried to go on the man's face, so I see it, instead of the flames. However, when I start by dragging the cursor on the face, the Brush tool starts getting lines across my cover, so the flames in odd places.

  Why the Brush tool is 'paint' on its own? I messed up a setting? I'm not press shift. I can't think of any other reason they would do that.

  Any help would be appreciated! Thank you!

  Wow, I just closed and reopened in Photoshop, and when I went back to my image, it worked!

• How to get rid three point on the Brush tool numbers?

  

  How do you get the ride of these numbers on my brush tool, I have allowed them on accident and now I can't get rid of them!

  They are markers of tool color sampling. Choose the color sampler tool

  

  and in the Options bar, click here

  

  Also:

  Once you have selected the color sampler tool, you can simply drag each marker out of the picture.

• Question of brush tool

  I use cloud creative Photoshop CC 2014 on a PC running windows 8.1. My problem is just related to the tool brush how interacts with my mouse. I used to be able to click on and hold the mouse and the brush for as long as I want. But now the Brush tool remains active for only a few seconds. I find myself re click mouse again and again to maintain the active brush tool. As if I paint a long line, so I have re click several times on my mouse. Used so that I could simply click and hold, and just drag it. I have looked at predefined and general preferences, but can't seem to understand.

  Any ideas on this would be greatly appreciated.

  Thank you

  In the short time that I have been a member of this Forum and monitored the responses to specific issues of the tool, invariably the suggestion tool (not the preset you mentioned) Reset, it's worth a try.

  Right click here to access the itL:

  

  Good luck.

• CC of Photoshop is having a problem with the Healing Brush tool

  It comes to my setup with the layer I'm working.

  1 got to Image menu / apply/image layer = bass tones layer (below) / mixture = Add / scale = 2 / and then select reverse. It looks like a high pass filter, but it is not.

  2 Exchange mode layer to linear light that restores the image to its natural state

  When I try to use the Healing Brush tool on my bed to make changes to a face I use the alt key pressed to select the sample point, photoshop seems to block the point that I select.  And he is on the screen in what looks like a high-pass filter, and then when I try to move the brush again point to perform a healing event fullscreen drag with the brush movement.  I don't then deselect the option once I use the ALT key. I've experimented a bit and found that if I hold down the ALT key it removes the high pass, but as soon as I release the ALT key, it goes back in a high pass.   I also tried clicking on this layer and by choosing another layer, the high-pass goes and I can use the mouse to select other items.  But as soon as I go back to the layer that I want to work with the screen comes back to what looks like a high-pass filter and you guessed it, the mouse drags the whole screen.

  Thinking that this might be a problem with Windows, I turned off my pc and rebooted and then restart photoshop and I went back to the same process and have experienced the same problem.  So I'm making this post looking for a solution.

  In the menu of the window display the Panel Source of duplication.

  Is the clipping option at the bottom off? This would cause all of the image to display in the overlay. -What is the opacity of the overlay and blending Mode different 100% and Normal?

  These options are not used with the Spot Healing Brush as it makes its sampling automatically.

• PS6 Spot Healing Brush Tool

  When I use the Spot Healing Brush, I get only points when I hold and drag the brush, but the PC of my friend made a line

  Its spacing tool brush can cause points check your Healing Brush tool spacing setting.

  

• Is it possible to move a line drawn with the Brush tool

  I created a document in Photoshop CC. I drew a number of line using the Brush tool in the toolbar on the left. One of the lines must be pushed a little. I can't find a way to select the line to move it. How can I do this?

  Assuming that the race is separated from the others properly, you can select around it (for example, with the rectangular selection tool or the Polygonal Lasso tool), and then simply drag the pixels to where you want.

  Note that if you work on background , it will fill the space left with the color of the background color swatch in the tools palette.

  -Christmas

• Help with the Brush tool!

  Hi all

  I am very new to Illustrator.  I followed this tutorial: https://www.youtube.com/watch?v=OGOeuEsgDrI.  I managed to make the wreath a style brush but when I create an ellipse with no filling/brush stroke and hit my created Crown brush, leaves extends around the border, but the circle is blackened (filled).  It is a different result that the tutorial where the leaves are the border and there is no fill.  When I choose other paint tools, such as the banner (it looks like a Ribbon), it behaves as the tutorial shows and the Center is not filled (as does the Crown Brush tool.  Please refer to the following screen shot, in comparing the two.

  

  Thanks for any help that you could provide!

  When you created the stem you probably had a fill that are associated with him. This caused it to fill with black when you assigned him to a circle.

  If you still have the original work used to create the branch, select only the stem and make sure that it is set to "no fill". Then option-do the work dragging the brush in the Panel icon shapes. This will update the work with the new art. Simply register and select "update to work. Your circle will now be hallow.

  If you do not have the original work, drag the icon of the brush on the artboard, remove center line filling and updating the art of the brush.

• Healing Brush tool works after that I tried everything that was mentioned in the forums and help guides from adobe. Any ideas what else can we do?

  Ladies and gentlemen,

  who knows what else can be done to make the Healing Brush tool works? I use the latest Photoshop CC app 2015 WITH WINDOWS 10. I TRIED TO RESET THE TOOL, CHECKED ALL THE LAYERS, CLONE SAMPLE AND SO ON.

  ANY OTHER SUGGESTIONS?

  [Read https://forums.adobe.com/docs/DOC-7273]
  [Moved from the connections to specific program... forum forum MOD]
  

  Could you specify exactly how the Healing Brush tool is not working?

  Thank you, whoever this moved to the right forum.

• Lightroom 6: I can' dehaze visualized and brush tools black and white on Panel

  Hello, I got Lightroom CC on my laptop... this month I bought a nex pc and I downloaded a new Lr and pack Ps in the new pc with my adobe... on the new pc account appears Lr 6 without the old dehaze tool and white and black brush tools a Panel (and dehaze).

  what I have to do to get back my old tools?

  (Sorry for my language, I can't speak English very well)

  Thank you

  These tools are not part of the 6 of Lightroom.

  You must return your Lightroom 6, get a refund, and subscribe to CC in Lightroom to get these tools.

• Photoshop canvas make errors while using the Brush tool.

  I searched google for solutions to my problem, but could not find any results. There is a screenshot of the included below number.

  This problem occurs when you use the Brush tool in Photoshop 2015.1.2 version. Areas rasterized, you see in the image below temporarily appear. If I change the scale of the preview of the Web, the problem goes away and the image appears correctly. I tried to change/disable the GPU settings but nothing has changed. I use a Tablet Wacom Intros 5 and I have the problem with the Tablet and mouse.

  I work in OSX El Capitan.

  Any ideas as to causes or solutions to this problem? Thank you.

  

  Update your driver from the website of the manufacturer of the GPU video card.

• Brush tools like: spacing is always 25% per script

  When I try to put any tool of type brush spacing, it gets all the values, but not the spacing value [1-1000]

  Is this a bug?

  For example, when I try to put 2% a spacing value, the result will always be 25%. The same happens when I try other values. The result is 25%

  Hardness, diameter, Angle, roundness, Flipy Flipx work well, but not space

  setBrushFeatures(130, 40,undefined,undefined,2,undefined,undefined);
  
  function setBrushFeatures (Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx) {
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID("capp"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
      var appDesc = executeActionGet(ref);
      var toolDesc = appDesc.getObjectValue(stringIDToTypeID('currentToolOptions'));
      var brushDesc = toolDesc.getObjectValue(stringIDToTypeID('brush'));
      if (Diameter == undefined) Diameter = brushDesc.getDouble(stringIDToTypeID('diameter'));
      if (Hardness == undefined) Hardness = brushDesc.getDouble(stringIDToTypeID('hardness'));
      if (Angle == undefined ) Angle = brushDesc.getDouble(stringIDToTypeID('angle'));
      if (Roundness  == undefined) Roundness = brushDesc.getDouble(stringIDToTypeID('roundness'));
      if (Spacing == undefined) Spacing = brushDesc.getDouble(stringIDToTypeID('spacing'));
      if (Flipy == undefined) Flipy = brushDesc.getBoolean(stringIDToTypeID('flipY'));
      if (Flipx == undefined) Flipx = brushDesc.getBoolean(stringIDToTypeID('flipX'));
      var desc = new ActionDescriptor();
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID( "Brsh" ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
      desc.putReference( charIDToTypeID( "null" ), ref );
      var desc1 = new ActionDescriptor();
      desc1.putDouble(stringIDToTypeID('diameter'), Diameter);
      desc1.putDouble(stringIDToTypeID('hardness'), Hardness);
      desc1.putDouble(stringIDToTypeID('angle'), Angle);
      desc1.putDouble(stringIDToTypeID('roundness'), Roundness);
      desc1.putDouble(stringIDToTypeID('spacing'), Spacing);  // ??????????????  Allways 25%  !!
      desc1.putBoolean(stringIDToTypeID('flipY'), Flipy);
      desc1.putBoolean(stringIDToTypeID('flipX'), Flipx);
      desc.putObject( stringIDToTypeID('to'), charIDToTypeID( "Brsh" ), desc1 );
      executeAction( charIDToTypeID( "setd" ), desc, DialogModes.NO );
  }
  
  
  
  
  

  SuperMerlin Issued the statement in a different thrreat that defines spacing in your original script

  DESC1.putUnitDouble (stringIDToTypeID ('spacing'), charIDToTypeID('#Prc'), spacing);

  //        Features(Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx)
  //setBrushFeatures(undefined,undefined,undefined,undefined,undefined,undefined,undefined);
  //setBrushFeatures(13,0,0,100,25,0,0);       //Adobe Defaults
  //setBrushFeatures(13,0,0,100,25,true,true); //Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx
  //setBrushFeatures(13,0,0,100,25,1,0);       //Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx
  //setBrushFeatures(13,0,0,100,25,0);         //Diameter,Hardness,Angle,Roundness,Spacing,Flipy
  //setBrushFeatures(13,0,0,100,1);            //Diameter,Hardness,Angle,Roundness,Spacing
  //setBrushFeatures(13,0,0,50);               //Diameter,Hardness,Angle,Roundness
  //setBrushFeatures(13,0,45);                 //Diameter,Hardness,Angle
  //setBrushFeatures(13,50);                   //Diameter,Hardness
  setBrushFeatures(25);                        //Diameter 
  
  //==============================================================================================//
  function setBrushFeatures (Diameter,Hardness,Angle,Roundness,Spacing,Flipy,Flipx) {
      //A Brush tool must be the current tool
      if (!app.toolSupportsBrushes(app.currentTool)) selectBrush();  //CC 2014
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID("capp"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
      var appDesc = executeActionGet(ref);
      var toolDesc = appDesc.getObjectValue(stringIDToTypeID('currentToolOptions'));
      var brushDesc = toolDesc.getObjectValue(stringIDToTypeID('brush'));
      if (Diameter == undefined) Diameter = brushDesc.getDouble(stringIDToTypeID('diameter'));
      if (Hardness == undefined) Hardness = brushDesc.getDouble(stringIDToTypeID('hardness'));
      if (Angle == undefined ) Angle = brushDesc.getDouble(stringIDToTypeID('angle'));
      if (Roundness  == undefined) Roundness = brushDesc.getDouble(stringIDToTypeID('roundness'));
      if (Spacing == undefined) Spacing = brushDesc.getDouble(stringIDToTypeID('spacing'));
      if (Flipy == undefined) Flipy = brushDesc.getBoolean(stringIDToTypeID('flipY'));
      if (Flipx == undefined) Flipx = brushDesc.getBoolean(stringIDToTypeID('flipX'));
      var desc = new ActionDescriptor();
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID( "Brsh" ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
      desc.putReference( charIDToTypeID( "null" ), ref );
      var desc1 = new ActionDescriptor();
      desc1.putDouble(stringIDToTypeID('diameter'), Diameter);
      desc1.putDouble(stringIDToTypeID('hardness'), Hardness);
      desc1.putDouble(stringIDToTypeID('angle'), Angle);
      desc1.putDouble(stringIDToTypeID('roundness'), Roundness);
      desc1.putUnitDouble( stringIDToTypeID('spacing'), charIDToTypeID('#Prc'), Spacing);
      desc1.putBoolean(stringIDToTypeID('flipY'), Flipy);
      desc1.putBoolean(stringIDToTypeID('flipX'), Flipx);
      desc.putObject( stringIDToTypeID('to'), charIDToTypeID( "Brsh" ), desc1 );
      executeAction( charIDToTypeID( "setd" ), desc, DialogModes.NO );
  }
  function selectBrush() {
      //select brush scriptlistener code
      var idslct = charIDToTypeID( "slct" );
      var desc12 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
      var ref8 = new ActionReference();
      var idPbTl = charIDToTypeID( "PbTl" );
      ref8.putClass( idPbTl );
      desc12.putReference( idnull, ref8 );
      executeAction( idslct, desc12, DialogModes.NO );
  }
  

• Why the Brush tool uses a lighter color than what I selected

  When I use black that he uses a gray and I don't know how to change it. I can use it on the pencil, but the lines are pixelly

  What are your parameters of brush tools in the options toolbar? Mode, opacity, etc. of flow.

• Where is the selection Brush tool in Photoshop CC 2015?

  I would use the tool selection brush similar to PES and rather QUICK selection brush. Is the simple selection brush in this version, or is it possible to add it somehow? I'm bored of my brush "to draw exactly where you want the selection to be!"

  You can put the selection in a layer mask and make as many combinations of paint with the Brush tool, refine edge, ect you want. Also, if he is not enough contrast to the quick selection tool, a tip would be to go to the Panel layers and find the channel with the most contrast, then push the contrast adjustment curves. Who can help tremendously.

  And the edges are a bit smooth, you might try the pen tool.

• The Brush tool is uneven and wavy?

  Well I looked around programs flash for a long time, but every time I try a Brush tool is the same stupid shit. It however seems to be a common problem and not on Adobe and I'm hoping to God that is not the case. I mean really? Well I just downloaded Adobe Anime cc for his essay feeling so sure it would work, and the question of brush tool would have gone. But NO, the SAME QUESTION IS THERE. At this point, I wonder if its my OH pen display that I use, that could be the problem? Could someone tell me if you happen to use a pen display of OH and if the brush on this program works very well for them? If not, is there some kind of fix for this? It makes me crazy! As I said, when I draw a line with the Paintbrush tool, it seems very rigid and terrible. The only way I can fix it if I have smoothing at least 40%, but what makes the lines slightly inaacurate to what I intend and the fact that it makes the design SO slow, and I need to be quick! Help for the love of God!

  We are working on improving the design experience in Animate Brush tool.

  It ' help if you directly post your concerns and your suggestions about the feature request/Bug Report Form

  You can also view the new Brush tool to paint (y) with draw in barrier option checked, which allows you to draw quickly and easily.