Drag / move do not work when the importation of .oam in superposition of folio InDesign

Similar Questions

• The mouth movements do not work when the wendigo turns his head on the side or 3/4, is this normal?

  It seems that the mouth is decked out for each puppet. However when I try to use it, the mouth does not get triggered by the audio when I use the triggers of 1, 2, 3, 4, but it does not work when it is oriented toward the front.

  Wendigo in examples of characters of the project? They work (for example, press the button to trigger one of the side views), then change your expression mouth in front of her webcam or speak into the microphone. Wendigo should have the face and Lip Sync behaviors on subpuppet from the view, rather than the top level of the puppet, for getting the mouth/visemes to work in all views.

• Drag / move does not work in the export release version

  I use the built in the DragManager class to manage a few drag and drop features in an application.  When running in flex builder, it works exactly as expected, but when I export a release build project, dragging only works in the vertical direction.  How is that possible?  What could be the cause of this strange behavior.

  Any help would be appreciated.

  So I thought about it, it turns out that it was a combination of two questions.  First, the background color should be set in order to avoid that the events of gout are received correctly.  Not sure why it worked but since flash builder!

  Secondly it updated me that AIR drag Manager was not the mouseX property that we depend on to a logic of positioning, then had to update to store the required mouseX value.

• Drag - move does not work on the first extension

  Hi all

  I'm a new user in Flex. And now, I am trying to create the first plugin.

  -the problem is that I use drag and drop to the desktop application event, works fine, when I debug it to first Extension, access the extension on the creation and the event does not properly.

  The error is Error #1034: Type coercion failed: cannot convert mx.events::DragEvent@7fff8465a19 in mx.events.DragEvent.

  The same two events and already worked in desktop application. Is this a bug or what Miss me?

  Thanks in advance

  Drag-n-drop works fine; See SDKPanel/src/ImportFilesDlg.mxml:handleFileDragStart ().

  I recommend starting a project Panel (based on SDKPanel), then pull in your office room by room application code.

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• Camileo P30 does not work when the 8 GB SDHC card is inserted

  Hello
  I just got a new camcorder Camileo P30.
  I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
  And it does not work with the card inserted.

  Here are the symptoms:
  (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
  (2) when the card is inserted, the following occurs:
  2.1) I can't take pictures or video - it does not meet the pressed buttons.
  2.2) I can't access menus.
  2.3) I can't shut off again.
  2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
  (3) I have tried different combinations of:
  3.1) Insert the card so that the camera is turned off.
  3.2) Insert the card so that the camera is turned on
  3.3) Insert the card while the device is switched on and in one of the menus.
  (4) the camera doesn't always work if I take the card again.

  During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
  At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

  Note to work around the #2.3 I took the battery.

  I was not yet looking for updated firmware, or connect it to the PC.

  Has anyone of you has met with such a problem?
  What did you do to solve it?

  Thank you.

  Hello

  Have you tried another card SDHC?
  I m not very well what is happening here, but I recommend you another card in this camcorder.
  I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.

• LAN does not work when the Cisco E1000 router hangs

  Original title: Download sp3

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

  I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mdenrique,

  1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

  If you have not installed Service Pack 3, try the following steps:
  Step 1: Download Service Pack 3
  see How to obtain the latest Windows XP service pack .
  b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
  c. save the file on the desktop.

  Step 2: Install Service Pack 3
  a. open the file downloaded and follow the instructions in the wizard to complete the installation.
  b. restart the computer once the installation is complete.

  For more information, see steps to take before you install Windows XP Service Pack 3

  Note: Once you have installed service pack 3, install the router and check if the problem persists.

  Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
  a. Click Start and then click Help and Support.
  b. under Pick a help topic, click Network and Internet.
  c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
  d. answer the questions in the troubleshooter to try to find a solution.

  For more information, see the following articles:
  1 see How to troubleshoot a network in Windows XP
  2 see two resources to solve the problems of connection network in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• VerticalAlign VBox does not work when the child has the height in %

  Hello

  I got the code like this:

  <mx:VBox id="vb1" verticalAlign="middle">
  <mx:CheckBox .../>
  <mx:VBox id="vb2" height="50%">
  ...
  </mx:VBox>
  </mx:VBox>
  

  Effect is that verticalAlignment does not work for the 1st VBox (it seems to me that it is set to the default value - 'top'). It works when I remove property "height" of the 2nd VBox (or when I change to "50%" to "50" or any other number).

  Hi Ibarim,

  verticalAlignment won't work for VBox when you have two or more children and who are direct children. When you have only a single direct children of the VBox, then it will work. Normally we use verticalAlignment = "middle" HBox and VBox. As VBox sets out its children vertically this property does not work when you have children over 1.

  You can try this

  width="200" height="50%">
  
  
  

  The above two combinations work correctly you only have immediate children... But if you see the bottom of case...

       width="200" height="50%" backgroundColor="yellow" verticalAlign="middle">                                  
  

  Now, in the case above, you can see that VBox vb2 is vertically aligned middle in the vb1 vb2 VBox is the only direct child of VBox vb1. Whereas it is now in the vb2 VBox box and VBox vb3 are not aligned vertically in the VBOx vb2 as because VBox vb2 contains now two children.

  Hope this is clear and make you understand the problem.

  Thank you

  Jean Claude

• Click on boxes that have a link to open a file or a URL do not work when the file is published.

  When you insert a click on a slide box, you are given the option to choose what happens "on success". I chose to open a file or a URL. When I press F4 to display a preview of the slide or a file, the links work correctly. But, when the file is completely released on a Flash SWF/HTM file, it does not work. The click box is here (Colombia-British hand appears), but no action takes place when it is selected. Please notify. Here is a screenshot.

  

  Hello

  The Captivate main page probably visited before validation is a landing called stickyzone.

  

  Unfortunately, you seem to have missed this area. If you had clicked on the topic frequently problems, you would have found your answer!

  Please see this topic using the link below and you will find your answer.

  Click here to see

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Music app does not work when the screen is closed!

  Android6.0.1

  Compact Z5.

  When I listen to the music in the music of sony and closed the screen app, music will play a minute and stop, even when I turn the offshore endurance and add it to the white list, but it doesn't work.

  Other applications that can play music also encounter this problem. Some applications of music need wifi, they cannot work when the screen is too closed.

  What can I do about it?

  I think also ultra endurance disables many apps, so my guess is that you have a 3rd party app that close somehow your applications when the phone goes to sleep.

• "mouseout/mouseouthandler()" does not work when the mouse leaves the scene

  AnimateCC. How to detect what mouse leave banner?

  Button has the same size as the banner

  Canvas_mouseOut

  Try switching the mouse banner cursore, Panel of exploration

  My code can't handle this problem:

  ////////////////////////////////////////////////////////////////////////////////////

  This.Stop)

  frequency of var = 20

  stage.enableMouseOver (frequency);

  this.btn.addEventListener ('mouseover', mouseOverBanner.bind (this));

  this.btn.addEventListener ("mouseout/mouseouthandler()", mouseOutBanner.bind (this));

  function mouseOverBanner() {}

  this.buynow.gotoAndPlay ('over')

  }

  function mouseOutBanner() {}

  this.buynow.gotoAndPlay ('out')

  }

  ////////////////////////////////////////////////////////////////////////////////////

  The solution is to target the whole canvas instead of a button to fill the canvas; This also works when the ad inside an iFrame:

  .addEventListener canvas("mouseover", mouseOverBanner.bind (this));

  .addEventListener canvas("mouseout/mouseouthandler()", mouseOutBanner.bind (this));

   

  function mouseOverBanner() {}

  this.buynow.gotoAndPlay ("over");

  }

   

  function mouseOutBanner() {}

  this.buynow.gotoAndPlay ("out");

  }

• Help! Drag / move does NOT work!

  Hello - I'm using a simple drag and drop quiz, but it does NOT work correctly .  When I play the movie, the mouse takes the movieclips but never falls, even when they are in a target area.  Help, please!  I have attached my FLA - any help would be much appreciated!

  Thank you.

  Just for starters, you change startDrag line to be: event.target.startDrag (false);

  Then see what's left more questions.  While I had other changes at different times, changing only one line was let down when I let go.

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• HP Pavilion 17-f049nd: graphic equalizer Beats Audio does not work when the multistreaming is enabled. (Realtek audio)

  Hello

  While I was listening to music with my helmet on I decided that I wanted to add some bass with the control panel Audio Beats.
  But using the graphic equalizer sliders not cause the change in the output.

  So I've updated my driver to the latest version hoping that would solve the problem.

  The problem was fixed immediately after reinstalling, but I discovered that the multi-streaming has been disabled.

  As soon as I activated the multistreaming in Control Panel, I noticed the legalization was extinguished immediately.

  I like both options and want to use both.

  So I thought when the multistreaming is activated the graphic equalization no longer works.
  Is there a solution where I can use the multistreaming and still keep the graphic equalizer?

  I hope this is enough information, if needed I can provide more.

  Greetings Jeronetj3

  Hi @Jeronetj3 ,

  Thank you for your query.

  I regret to inform you that you can not enable both options.  You will need to choose one or the other function that is most important.

  The Beats audio panel doesn't have an option to control two different audio sources.

  Concerning

• Smartphones blackBerry BUG: camera does not work when the lamp is on

  BlackBerry PRIV model STV100-1
  AAE016 (aospl-msm8992 69 qc8992_sfi-user output software version
  Android version 5.1.1
  Last updated on 1st March.

  Previous version of the software had the same problem and can be reproduced like this:

  (1) to any application other than the camera, drag down twice from the top and turn on the flashlight.
  2) press the squarre and switch to the camera application, which says now: "camera not available."
  3) slide down twice, turn off the flashlight and switch camera to the photo app, now there is no message, but the camera still does not work.

  (4) use the table to any other application, then the table to return to the camera application, which now works fine now that the lamp is off.

  If you attempt to try the above, when you are in the camera app, once you drag down twice, there is no icon to turn the flashlight.

  Hmm, that's an interesting and scary use case, please provide

  Someone else see this thread, if you want this functionality please like this post to express interest