Draw freehand on the container to Image Vision - are part of the Image

Similar Questions

• Draw freehand with the pen tool

  Hi guys,.

  I'm quite new in illustrator and my question is: I can't do on the fly of drawing with the pen tool.  When I click on the pen tool, it comes with little x sign beside him.  Is it not possible drawing freehand with the pen tool?  If so, how can I remove this pen cursor x?

  Thank you very much

  Try the pencil or brush tools. They allow freehand drawings. The pen tool is really reserved for Bézier drawing.

• Try to fill a line of drawing freehand

  Hello world

  I'm looking for a solution for my line of drawing freehand. I added the effect on the race itself (based on a rectangle), which seems pretty good. But if I try to fill the rectangle, itself fills. I want to fill in the line of drawing freehand, not the rectangle, what should I do? Thank you

  Angela,

  If I understand correctly, in the right way, you want to fill the whole of the area in the line of drawing freehand.

  The reason why it does not for you as for Mike is simply that the inner edge of your Freehand drawing is outside the filled rectangle, not in his.

  If, if understood correctly, we want the area filled, you will need to do something very different.

  You can:

  (1) remove the fill of your way of drawing freehand, create a copy below (Edit > paste on the back) and hide the original

  (2) with the selected copy, object > decompose the appearance;

  ((3) create a rectangle with the desired filling, which extends beyond 2) on all sides and move to the rear.

  ((4) select 2) and 3) and Pathfinder > less foreground (soustraire subtract the area of shape in older versions, press Alt/Option to develop and/or object > ungroup as necessary or desired);

  (5) remove the parts of the rectangle out of the way of Freehand drawing;

  (6) show the original path of drawing freehand.

  Edit: Hi Monika.

• The food does not contain an image valid podcast.

  Hello

  I asked this question before and the control point was that the image is in https. We addressed it now and the image is http, but I always get the error the food does not contain an image valid podcast. Podcast images must be at least 1400 x 1400 pixels.

  Flow validates correctly as well, although when tested in iTunes, the episode does not show.

  Here is my feed - http://feeds.feedburner.com/accenture/stagemanual

  Thanks in advance.

  I checked in the Podcasts connect and the error is not with the image, but it complains that it cannot download episodes of your EDI. This is because the URL of your media file is

  http://link.videoplatform.limelight.com/Media/?Mediaid=01bc098836b64009915f2aa89 00aa4ab & amp; width = 480 & amp; height = 321 & amp; playerForm = player

  It is a Flash drive. You can't use a player incorporated - you must provide a direct link to the media file. and it's not Flash. For video, it must be .m4v, .mov or .mp4. The file should play in a browser when you enter the URL, not force a download or appear in a player.

• I just started to use the Muse for our design agency and learn to build us a new site, I managed to create a basic Viewer that contains sliding images based on what I have to do now is have a window POP that goes into the details of the pr

  I just started to use the Muse for our design agency and learning how to build us a new site, I managed to create a basic Viewer that contains sliding images, what I have to do now is have a PDP window that goes into details on projects, what I want is a piece of text or icon that when you ride on it , and then click a separate window opens with additional information in, once finished reading the news, you can click to close the box, any advice on how to do this?

  The best way to do what you ask is with the widget of Composition. Start with the ToolTip predefined, which by default displays the info on working capital. You can change the display option to click, which is what you are looking for. You can also add the close button or the info disappear in slowing.

  David

• Can't find the tool drawing freehand

  I bought PS touch, and it lacks the tool of selection of drawing freehand. you don't know if something else is missing, but it is the first tool in the first tutorial. Help, please.

  Hi rlxpress,

  The tool is there, but you need to scroll down to get it. Plug the top of the toolbar and move your finger down slowly. As your finger moves over the tool icons, a ToolTip will appear showing you the name of the tool. The Freehand selection tool is located in the game under the Lasso tools. Here is a screenshot which can help you find:

  

  Who help me?

  Luanne

• Drawing freehand in another language

  I have updated my Apple Watch watch 3 OS and, to my surprise, I saw that the drawing freehand for responding to messages is not available. My watch is set in Italian and research on Google that I thought I should put the language into English. It's a pain the * (I apologize, I translated what I meant with google translator and it seems that this translation is a little rough, but I don't know of another word to say that).

  Is there another way to have the design freehand in languages other than English (when the letters are almost the same as Italian, except accented) or Chinese (we have seen Chinese working during the keynote)?

  Hello

  To use the Freehand drawing, the language for a conversation must be a language supported for freehand drawing.

  There are currently English, Chinese simplified and Chinese traditional.

  More information:

  Drawing freehand on your Apple Watch - Apple Support

• Manipulate swf files that contain multiple images

  Hello

  I'm trying to manipulate a swf file containing multiple images inside, but I can't image of it.

  The detail of what I mean is:

  I imported a swf file to a cast member. Then, I created a sprite on stage with the contents of this member. Finally, as I need to zoom, I made a copy of the Member image using the command "copyPixels" and the content is displayed without problems on stage. So far so good.

  The problem appears when the swf file contains several images. If I move for them (using for example getToFrame (sprite (num), 2) to go to the second), on stage, it shows the corresponding image without problems. But if I do a "copyPixels" using the reference to the Member when the SWF has been on scene is always displays the first image.

  I tried to make a copy of the scene when the sprite shows one frame other than the first, but this option didn't allowed me to get the picture, which indicates that the property is not available.

  Any idea of solution?

  Thank you.

  I used the command that you offer me

  and solved my problem.

  Thank you very much.

• helping to create 100 black drawing %K line in a CMYK image

  Hello! so, I'm having a frustrating problem. I prepare an image for an offset litho printer 4 colors, and the image must be in CMYK mode. I have two layers in the image: the bottom layer is all the colors, and the top layer is a black line drawing. I have all the drawings to the black line on the top layer converted successfully in 100 %K black for the printer, they need. I did this by selecting all the black lines with the magic wand tool, then Edition-> fill and fill with 100 %K, 0% magenta cyan at 0% 0% 100% yellow k. This worked very well. Here's the problem - when I then try to flatten the image, and I use the eyedropper tool to sample the black areas that were a second ago 100 %K, they are no longer as such. There are all kinds of different degrees of blackness once I have begin sampling autour after flattening the image. I can understand that, somehow the colors under black affect the darkness of the image, but I don't understand why. How can I fix? I need to have a flattened image where black people are still all 100% k thanks.

  Check Google or YouTube re: Photoshop Spot color channel. I think that's what you're looking for. (Your Spot color line drawing is black) The function can be found here:

  

  The book still print with four plates. The spot color is abandoned the other colors (they shrink the detachable part of foresee trap) and Spot art channel is added to the black plate (sometimes with a 40% Cyan, so to create a darker black.) Often, alone Cyan is used to strengthen the black to minimise fringing caused by tiny misregister press.)

• What does 'insufficient media. This transition will contain repeated images"means?

  Premiere Pro CS5.5.2. Windows 7 Pro.

  What does 'insufficient media. This transition will contain repeated images"means?

  Duration of image A 00.00, 08:48

  Duration of image B 00.00, 31: 00

  Duration of transition 00.00, 00:30

  At maximum zoom, there is no difference between the two clips to 00. 33; 44; 44 in the timeline panel. Transition window info appears on any video transition that I use.

  Duration of the film is currently 01; 09; 39 38

  D0NNN wrote:

  What I don't understand?

  Handles the item and transitions

  https://helpx.Adobe.com/Premiere-Pro/using/transition-overview-applying-transitions.html#c lip_handles_and_transitions

• Hello everyone! I need an application where I can hand write or type and draw, all in the same...

  Hello everyone! I need an application where I can hand write or type and draw, all on the same page,.

  I'm taking courses in biology and chemistry and sometimes I need to draw and explain

  Can someone help me?

  Thank you!

  I need an application where I can hand write or type and draw, all on the same page, I'm taking courses in biology and chemistry and sometimes I need to draw and explain

  @manuelito.castro,.

  Discover the "Mobilenoter" application, that includes the possibility of ink in free form. If you need to be able to classify and organize your writings, Mobilnoter works perfectly with a single Note.

  -Doc

• draw lines on the graph of the intensity

  I want to draw lines on the graph of the intensity.

  I am already looking for some questions before.

  I know there is a vi could draw line on the graph of the intensity by dragging the mouse.

  But I need more precisely what set the length and the angle between the horzontal line.

  The setting is very ideal for me. But I don't know how to use it in the intensity chart.

  Is there anyone can help or give some advice?

  Your example is not so great because it uses 100% of CPU on a kernel at any time, do nothing.

  Here's a quick rewrite of my old example here. He draws an angle with the specified length and angle to where you click on the chart. This should help you get started. Modify if needed. (Also remember that trigonometry is much easier when using complex numbers )

• The computer draws upwards of the instilation id, but have no other record numbers

  lost cd after that it was loaded on the computer have only the instilation id. do I have to get a new

  * original title - cd has been loaded on the computer before I bought it, but I lost the cd. The computer draws upwards of the instilation id, but do not have the other numbers off disc can u help me *.

  See: How to replace Microsoft software Carey Frisch

• Windows Defender does not draw attention to the changes to the system, good event 'active' s, I don't get the error messages

  Windows Defender does not draw attention to the changes to the system, good event 'active' s, I don't get the error messages. How can I solve this problem?

  Defender alerted system changes in previous versions (Vista, etc.)

  It is no longer performs this function under Windows 7.

• Printing a document in indesign that contains an eps logo. Part of the logo is not printing, but shows a white circle instead of a ball with a gradient. I think that it is an overlay problem - can anyone help please

  Printing a document in indesign that contains an eps logo. Part of the logo is not printing, but shows a white circle instead of a ball with a gradient. I think that it is an overlay problem - can anyone help please

  Try to resave the EPS to the native .ai or .psd format (depending on whether it's raster or vector) and use it.