Dream Weaver 3 does not not on win 8.1

Similar Questions

• Examples of files to start practicing in Dream Weaver 2015 pass not in my documents

  What was the simple process of the sample files download to start practicing in Dream Weaver 2015 are now does not download in my downloads on my PC files, Im wondering if this could be due to Windows 10 that I downloaded last week? When I go to open with DW they have not simply as being downloaded, but when downloaded initially, it looks like, they are.  When I had Win 8.1, I had no problem, then download them. Everyone knows this, or can you help me?

  Ive has figured this now, its because DW does not open zipped files, so I had to extract the location initial document then put into the new folder which then allows DW will open in its own documents.

• HP pavilion g7 passes all diagnostics of hd, but does not load win 7

  Hi all

  I have a laptop HP Pavilion G7 1150US who does not win 7. I tried everything from formatting the hard drive with a clean installation of factory recovery disks and ran all the tests of hard drive Diagnostics and they have passed with flying colors. I myself to make a new record hard but if the hard drive says that there is nothing wrong with the disk I want to at least know what I can do to repair the disk, so it does not work properly. Help, please.

  Start DBAN disk usb or CD. He will write the zeros and ones on the disk. If past all the diagnostics of hard drive, this should do the trick.

  Kind regards

  ERICO

• Satellite L40-17 t Wireless does not! Win 7 32 bit

  Hello, my name is Alex. I have a problem with Toshiba L40 - 17 t wireless driver.

  So 3 weeks ago I got windows 7, WiFi worked fine, had no problems with it.
  Recently I reinstalled windows 7, and now my wireless does not work. It is said that no connection is available, even if the distance between my laptop and the router is 10 cm.

  I tried windows 7 driver newest---> does not
  I tried windows vista a newer driver---> does not
  I tried the windows xp compatibility mode---> does not

  Lucky my local network works, and I can't access internet, but I also want to use the Wi - Fi function.

  My wireless card is Realtek RTL8187B.

  I tried the drivers from realtek site too, they are not no longer works.

  However, I remember before you reinstall windows 7, I looked at the version of the driver and its date was around 2008. I have not found all the drivers for Toshiba L40 - 17 t, difficult 2008. I hope someone can help me solve my problem.

  Thanks in advance,
  Alex

  > I tried drivers from realtek site too, they are not no longer works.
  Is this means that wireless network adapter is not installed and recognized properly in the Device Manager?
  In the Manager of devices-> network cards, you should see the wireless network card. If there is no yellow exclamation point and then the wireless network card is installed correctly and that the driver is working

  > I have windows 7 ultimate, wireless worked fine, had no problems with it.
  Recently I reinstalled windows 7, and now my wireless does not work. It is said that no connection is available, even if the distance between my laptop and the router is 10 cm.

  This suggests that there is s configuration problem.

  First of all; Are you sure that the WiFi was enabled? Using FN + F8, you can enable the wireless network adapter. If the FN buttons would not work, then you must install VAP (value added package) and Flash memory card Support utility. If you didn t find these tools in the pilot L40, please check the new generation of portable devices such as L500 or newer.

  On the other hand; are firewalls, antivirus software pre-installed that could affect the connectivity? Check it; I've been reading about similar problems, and finally a firewall (like zonealarm) was the problem!

  Following; Do not forget that you have configured the wireless correctly; use the good encryption and password; for testing purposes, you can disable the security settings on your router and may attempt to connect without the use of encryption.

• Remote Desktop does not connect Win 7 on Win XP pro.

  The two turned on, remote active and available on the same network. I tried to connect by the name and Ip address, but I still get the error message. Remote Desktop cannot connect to one of these reasons: 1 remote control, access to the server is not activated 2 remote computer is disabled 3 remote computer is not available on the network.   I have connected before. In fact, I went to my computer in a click with the right button on the computer in the access network, it could not connect. He gave me the opportunity to diagnose the problem, so I chose it. The result of the diagnosis was the computer appears to be correctly configured but (computer) does not. I recently, during the last week, the object a new copy of windows xp pro on the computer and I have connected with access to distance since.  Why can't connect now?

  Check your firewall and router, the remote desktop protocol uses port 3389, this port must be opened.

  John

• Time server does not synchronize Win 7 Ultimate SP 1

  I tried many things

  -make a new task of time synchronization
  -used net stop w32time in the cmd prompt (does not work)
  -Time internet access 'change settings' (are not authorized to perform this task) * IM THE ADMIN! *
  -Played sfc/scannow "no breach of integrity".
  -Have atomic clock "does not work".
  -Server time value pool.ntp.org "does not synchronize.

  Please, I tried many options but none of them work... I am at a loss... HHHHEEEEEELLLLLLPPPPPPP

  Hello

  You are connected to the field?

  Note: If your computer is on a domain, you cannot synchronize your clock with a time server Internet.

  I suggest you to perform an in place upgrade of the operating system using the disk of the Windows 7 operating system.

  You can read the following article.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: make sure that you back up all your data before you begin the installation. Check out the link.

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  If this does not help, I suggest you contact your computer manufacturer for assistance.

• Satellite A100-233 does not start Win XP

  Hello

  When I was working on my A100-233 it suddenly hung up, only the touchpad worked. I try Ctrl Alt Del, but no use. After that the laptop start peeping (a long peep) until I stopped it by power.
  When I restart, the windows did not start (black screen) even in safe mode (it listed some files and stop there).

  Finally, I tried to re - install windows by its restore CD. Stop the CD after loading and display 'pleas wait. "
  Also, I try to start MS-DOS form ok. But there is no hard drive (C: D: E :) nothing.)

  But the BIOS recognizes the hard drive, when I connect my hard drive to a USB port on a different computer, it worked, I saw all the data.

  So what happens on my laptop.

  So in my opinion there would be something wrong with the hardware.
  Maybe it's something wrong with the HARD drive partition table or the memory as you know it is always difficult to say what might be wrong s s.

  As San Remo said an attempt to set the BIOS default settings and check if the HARD drive is correctly recognized.
  Then format the drive HARD integer (delete all partitions) and try to reinstall Win OS.
  In your case, I will try to reinstall the operating system from the original CD of MS Windows XP too.

  If you fail the pieces of unique equipment as the RAM and the HARD drive must be verified.

  Good luck

• Lenovo Y500 close unexpectedly - does not install Win vista/7/8

  Hello friends

  It is Anubhav Jain of Mathura (India). I have a lenovo 3000 Y500 laptop with Win Vista Home Basic, I bought about 3 years, to 1 last year all about I am facing a problem with my laptop. The problem started when I tried to open an attachment in my email. At the time when I clicked on the file to my laptop shuts down suddenly (seems certain virus was in it). Even after trying the key recovery option, it has not begun. Then I tried to install Windows XP and it started working.

  Now the problem is

  1 - when I try to install over XP is Win Vista/7/8 while in the middle of the installation, it stops. This means that it is impossible to install any other OS then XP.

  2. up to a few months back it worked fine under XP, but last month the problem began under XP also. Mean while I'm working it will suddenly off. If I try it, as soon as it shows the home screen, that would once turned off. But if I open it after some time then she start and run for a few hours.

  3. even under XP if I try to install MS Office 2007 or above the same thing occurs for example, just after the progress of the installation of small the laptop suddenly shuts off and will not let me intall Office 2007 or a later version.

  Is this due to a malware or overheating of motherboard problem. I formatted the entire hard drive and tried installing after removal of partitions and making new partitions.

  I ask you all to guide me please. Thank you in advance.

  Kind regards

  Anubhav jegou

  Dear SE Soha,

  Thank you very much for your answer. I had already tried what you suggested. But not resolved. Yesterday I took my laptop hardware engineer and diagnose after he was identified as a chip in the motherboard was faulty which created this problem. After replacing the laptop started to work well. It was not a software problem, it's a motherboard problem. But the sad part is that there is not any guarantee for such repair of motherboard and next time if this same problem this laptop will have to be trashed. Rest is up to God's blessing.

  Thank you very much for your support.

  Anubhav jegou

• I/o Magic DHM worked fine w/XP but it does not see Win 7

  I used a 250 G DHM I/O Magic with three different computers under XP SP3 - it has always worked well - I just got a Dell 17R laptop - when I plugged it in the first place in, unit has been identified and apparently 'ready to work' - I used the laptop a few days then close it for about a week - when I rebooted, the magic of IO is not listed - in fact a HD (without name) is listeed but no more about it don't is - after several days even the generic HD icon disappears from the screen when dbl clicking on desktop - after running System Mechanic from Iolo and allowing the recommended patches, the EHD apparntly is not there - BUT - in the face of the EHDS icon illuminates and flashes without apparent reason - except that I remember having seen "32" in one of the screens I got after IO magic was plugged and I happen to remember that my Win 7 64 bits, I'm a shameful loss - I have connected-disconnected-reconnected-etc EHD even for 3 computers with whom he worked before but now recognizes none of the 4 machines in this Office - sorry I'm apparently retarded! Help, please...

  Hi RonaldSmoyer MD,

  I suggest you to contact the administrative system (local team) for more help and information officer.

  You can also post request in the TechNet forums to get help.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Waterfalls of the user interface does not support win 8

  Hello I have a problem, I tried to install my stunts BETA 2 in my computer with Win8 but it's install finishing show me an error message "_ - nterface not support."

  Is there any way to solve this problem or I have to redo a downgrade to Win7?

  Hello

  I use stunts and earn 8 a few months now, no problems.

  Bring up a menu contextual (right-click) on the Setup file, select Properties, then the Compatibility tab and set the compatibility for Win 7, it will then install without problem.

• Using of new 64-bit drivers, but DOES not connect Win 7 & TungstenE2. Help!

  After trying to hotsync over bluetooth on the new laptop with Windows 7 w / TungstenE2 and failure (serial port used by another application);  I downloaded the new 64-bit drivers provided in this message section. Problem now: no link could be established between the desktop and the device. Even if bluetooth is 'off' the device is now trying to use the bluetooth to non-working process. Tried the USB process, using the newly installed drivers. No connection.  It is now beyond my skills, and I'm in the circle of bluetooth, or the circle of 64-bit USB driver. I must be missing something!

  Have you set the Hotsync Manager to use USB on your device and the computer?

  What version of Palm Desktop are you using?  6.2 or 4.x?

  On the E2, open the Hotsync application and display the value.  It must be defined on 'Cable', not Bluetooth.

  WyreNut

• Driver LaserJet HP1020 won't load does not in win - xp sp2

  first of all the wishes of the day!

  I'd like to introduce myself is Martial of British Colombia has been working for over the last decade in the it field, troubleshouting since the beginning and not installed the HP products in different industries.

  But today, I'm really shocked that I'm not able to install the printer HP laserjet 1020. Masson time, I installed the same printer, but today I'm desperate!

  When I install an error occurred during the installation of the legacy: the installation of the driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If any suggestion/solution, I'm really very appriciate.

  Kind regards.

  Martial of BC.

  Hello!!

  I still don't have any solution!

  Please helpe

• system tray does not load win xp

  J’ai été déconner tout en écoutant quelques tunes'Dick' que je suis » !. and some how now my systemtray will not charge you only see the clock and no system tray icon that shows generally my Norton security and other active startup programs? and in the properties of the taskbar hide the inactive box icon to check! has grayed? so I can't bring this from there and I've been at it for hours and I have tried everything with no luck! Any idea of it please? Be most appreciated

  Hello

  Because looks like it's fairly new, I suggest trying a system restore.

  Please see this link. http://support.Microsoft.com/kb/306084

• HPMSN145. DLL does not. (WIN-7)

  HPMSN145. DLL error when printing with HP M602

  Printer is installed on the 64-bit server. This error is only coming on Pc or two running WIN 7.

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.
  
  I hope this helps!

• Satellite A500-19 q: Win 7 does not-UNMOUNTABLE BOOT VOLUME

  HY everybody,

  I work for 2 months with my new race A500-19 q Win 7 Home Premium 64 bit.
  Last night the system was regularly interrupted with the command "shutdown" of windows.
  Today, the machine does not load win 7 in all.

  If I let the work load, the system reached the blue screen with "UNMOUNTABLE_BOOT_VOLUME".
  If I try to restore the system with the recovery dvd made some time ago by the Toshiba utility him begins to load information, but after some research on hard drive, he stops with black screen and the cursor arrow, but nothing else.

  I downloaded and burt disk repair Windows 7 64 bit, but as already sad, starting the system of loading but it does not get to the end.
  So it seems impossible to carry out the command "chkdsk /f.

  What should I do finally?
  Thank you

  Post edited by: MikeB_2

  Hello

  The cursor blinking in the upper left corner means that something might be wrong with the HARD drive or partition on the HARD drive.
  I had this problem a few years ago on my laptop and in my case that the HARD drive is dead, it was a head crash.

  In any case, I think you should check if the HARD drive can be formatted using another disc
  You can try a Linux live CD or something like that