Using of new 64-bit drivers, but DOES not connect Win 7 & TungstenE2. Help!

Similar Questions

• vCenter connects to SQL Server very well with 64-bit DSN, but does not connect with 32-bit DSN

  Created a system DSN 64-bit and 32-bit vCenter server by using SQL Server Native Client 11.0 and exact same settings pointing to the database on a SQL Server 2012 box.  The 64-bit DSN connects very well and the 32-bit DSN fails to connect.  Can someone give some guidance as to what could be the problem?  I have never seen it before.  They are pointing to the same database and use the same local SQL account.

  TIA

  The challenge was to enable the SQL Server Browser service in the SQL box - it is disabled by default in Windows with SQL Server 2012 2012...  This should really be documented by VMWare.

• I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  Original title: ipod

  You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)

  See also - http://support.apple.com/kb/TS1363

  It will be useful.

• Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

  mifi4510L

  Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

  THX

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• Headset Bluetooth paired, but does not connect.

  I recently bought a pair of headphones Bluetooth (BT) to replace the ones I currently have. In any case, I have them connected to my phone, but now I want to use it on my laptop. It does not connect to it. He was just trying to connect to my phone. I even turned off bt on my phone, but the headphones does not connect to my laptop. I tried to go to the playback etc... devices and clicking on the 'connect' option, but it does nothing. Everything seems to work fine, except that! Help, please.

  Hi Tom,

  Please contact Microsoft Community. I understand that you have a problem with the Bluetooth Headset connection. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  To better understand the issue, let me know if you face any problem when connecting the Bluetooth headphones on another computer in Windows 7?

  This problem might have occurred because of these reasons:
  1. wrong settings.
  2 damaged material.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest you to run the corner hardware store to ensure that basic material settings are set correctly.

  Open the hardware and devices Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest to return the item and make sure that the Bluetooth settings are set correctly.

  Add a Bluetooth device to your compatible computer device http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  See these articles for more information:

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows/change-Bluetooth-device-settings#1TC=Windows-7

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

  First elements of Windows 8.1 does not share the drive and folder out of operation but does not create something like never help

  What version of the program do you use?

  What steps do you take to share your video, and what happens when you do?

  Is it only a DVD that will not be out of Premiere Elements, it or will it not exit/share any video size?

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• I have install windows 8.1 and to use as a dual boot Linux, but linux not shown in boot pls help me

  Hi Acer, I use Acer V3 - 571G i5. I have install windows 8.1 64 and Linux 64-bit for use in dual boot, but linux not shown in boot pls help me. When I boot it shows only windows 8.1. In my computer the drive not present but is disc from the drive partion what linux installed shows as logical.

  Someone on the net says 'change the UEFI boot legacy '.

  but I can't have this option in my Woods, please help me where is and how to change...?

  You can't update 1.x to 2.x and you do not need.

  you just erase you the Ubuntu grub after windows 10 installation, follow the first link on the post of JordanB.

• New HP Envy DV6 - 7202SE does not connect.

  Hi, I bought a HP Envy DV6 - 7202SE 2-3 weeks, everything was working fine and one day the Wireless does not work...

  All other devices in my house (IPAD, iphone, Android phones) thus communicate them with the Linksys WRT120N router, but my laptop does not connect.

  I tried with the network cable and he surfed the net fine, but the Wireless does not work.

  It also shows the name of the network in the list of available networks, but as soon as I connect it after you enter the authentication key, the connection is not successful.

  I even formatted the computer to its factory settings, but still it does not connect. I checked Device Manager and the drivers updated and everything goes well it... but it does not connect to this router. I tried to connect to my wireless router and it works perfectly... but with Linksys WRT120N router it has stopped working suddenly. Do I have to update the firmware?

  Kind regards

  Amir

  Disable the security on the router and connect temporarily without security.  If successful, go back and add WPA2-AES and try again.

• OfficeJet pro 8600 more connects wireless, but does not connect to Internet

  I use Windows 7.  The free thread is ideal for printing, but I do not understand why the web

  does not connect.

  Hi susea;

  Hope you are doing well and I'm sorry that you are having problems.

  Jean-Marie this tool;  http://support.HP.com/us-en/document/c02037530

  If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)

  You can change this setting by going to do the following:

  Press the Win key on your keyboard.

  1. Type Ncpa.cpl (this will take you to the network connections)
  2. Select your wireless connection
  3. You will see a screen on the botton, you will see a button called properties, near the left button
  4. On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
  5. In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
  6. Type 8.8.8.8 and 8.8.4.4 airfield

  I will also choose a static IP address, and this can be done here as well.

• Devices bluetooth audio seen paired, but does not connect unless that selected

  iPhone running 9.3.3

  Question is that devices audio bluetooth paired when turned on bluetooth settings will appear on the page, but they do not send audio to them automatically. They are listed under "My devices" but show "not connected". I can select the device in the menu settings and plays sounds as soon as I touch the name of the speaker, but not until I do. Same problem in the car too. Appears on the right, but shows not connected until I have the touch.

  I didn't open the bluetooth settings to on any prior iPhone iOS just selected a camera already attached before. I deleted and repaired, switched bluetooth, reboot the phone, soft reset the phone and even a network reset.

  Thank you.

  Try control centre. Swipe up from the Home button

  

  This screenshot of my iPad, it's the same on iPhone

• tnsping kcp5 is ok, but does not connect using netservicename

  Dear Sir.

  We tried the trial version 10.0.5

  On the computer of Client 32 bit (XP and Windows 7) this PL Sql Developer works very well if we connect to 32-bit Oracle or Oracle Server 64 - Bit Server.

  We tried this on Windows Server 2008 64-bit (Machine formatted fees)-> installed Oracle 11 g 64-bit Standard Edition Version-> it works very well for the database on the server, as well as through client machine using netservice.

  Now, we have installed PL SQL worm 10 on Server 2008 (64-bit)-> customer request 32-bit install-> we installed 32 bit Oracle 11 g-> (full) Client created by using the new net service 32 Bit Client-> Net (kcp5) configuration utility-> we are able to

  tnsping kcp5 to the server physically level but also at the level of the customer in the machine.

  But when we connect with system/manager@kcp5-> it does not work at the level of the client as well the machine Server

  This installation of oracle 11g 32 Bit 64 Bit 2008 Server client has created this problem which worked very well.

  We have no "need to install 32-bit Oracle client 11g Oracle in Windows 2008 (64-bit server), but since it was held by Pl SQL Developer-> this, installed us.

  Please advise as what to do now.

  Kindly find attached three jpg files as below: -.

  (a) Test_Server_Services.jpg-> various Services running at the level of the Windows Server 2008 (64-bit)

  (b) kcp5 tnsping Test_Client1.jpg (netservice Testing which is OK at the level of the server, as well as at the customer level)

  (c) Test_client2.jpg connection system/manager@kcp5 that gives

  The error ORA - 12514 TNS Listener does not currently of service requested in connect descriptor

  Concerning

  Suresh BB

  ORA-12514 ALWAYS only occurs due to a problem on the Server DB system.

  One of the causes of this problem are when the Oracle database is broken & needs to be started.

  A remote client send a request to the listener by asking to be connected to a specific service.

  If/when the listener knows nothing about this service, the receiver responds with ORA-12514

  view the results from the OS controls following two:

  lsnrctl status

  lsnrctl service

  Because each request to connect to the listener gets connected, listener.log file will contain a line with 12514 as status code.

  * This line contains valuable debugging information. So after this line & surrounding lines.*

  for additional debugging suggestions read the URL below:

  http://edstevensdba.WordPress.com/2011/03/19/ora-12514/

• Create a new user in Vista, but does not appear under c:\Users[user-name]\Music\iTunes\iTunes /.

  I tried to add a new user of Vista. The name and icon are created in the login screen, but when I tried to access the new user account, I received the message "user profile service logon failedthe. User profile cannot be loaded.
  I read the responses on the copy files to the user overall, but when I looked in the c drive, the new username has not been added. What should I do now?

  Hello

  The problem is probably damaged the ADMIN account, you were when you created the user account.

  Log on as an ADMINISTRATOR or use the HAA below and REMOVE the user account that you created. Then move forward
  as if your ADMIN account (the one you used to make this account user) has been corrupted. Once you are sure
  It is OK then DISABLE the HAA - login to your ADMIN account and make a different for USER account
  see if everything is OK.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the
  same for other accounts that may be difficult. Then if necessary you can also reset your password
  in the accounts. Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the update ending in 103. Download the drivers, but does not resolve the issue

  My speakers have stopped smoking. Ive tried everything. Ive pilots has been removed and reinstalled them one hundred times. Ive tried to get sound through my monitor via hdmi cable, nothing worked. essentially, each routed I, eventually a code 10. It will install the drivers but says theres a problem with the installation and the device will not work. Ive plugged into each port with each cable is there and nothing. I added a sound card and still no sound. card originated was off of the motherboard. is it possible that a cell phone charger was sitting on the cables of the loudspeakers and fried somehow my sound on the motherboard. ? I get the noise static speakers but that's all

  Hello

  Please contact the Microsoft Community.

  I wish that refer you to this article-

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070103#1TC=Windows-Vista

  Let us know if you have any other questions.

• Bought a new Mac, installed Lightroom but does not open application

  Whenever I try to open Lightroom it is said that it has been installed successfully, but once the page open starts I get two error messages. The first one says - "Error occurred when attempting to Modules of Chance." Then the second appears and says "internal error occurred: failed to create required folders: / Users/Overton/Library/Application Support/Adobe/Lightroom develop Presets.

  Tried uninstalling and reinstalling several times and we looked on the forums and support but do not know who to turn to next. Thank you

  Hi Ryano,

  The Lightroom inside the Application Support folder could have hurt Lightroom permissions preventing to write about it, which can cause this error.

  • Navigate to the following folder: /Users/ [user name] / Library/Application Support/Adobe/Lightroom.
  • Highlight the Lightroom folder and choose file > get information.
  • Under sharing & authorization, make sure you have privileges to read & write. Otherwise, click on the padlock icon at the bottom right, enter your password when prompted, then click the only entrance to reading and select read & write.

  For more information, see the following link: error changing modules

  Concerning

  Sarika