Dreamweaver CC 2105 "internal data error - failed to receive data from the network.

Similar Questions

• Hard drive data from the sector error on desktop HP Pavilion magnesium grey Edition p6404y

  I have a HP Pavilion p6404y desktop computer. I uninstalled and reinstalled the HP Support Assistant. When I run the wizard it tells me this - "WDC WD10 EADS-65M2B1 CMSS Disk Device-4 errors in data sectors make unusable sector." He suggested I have a scanner. If I run the quick scan, it ends and shows just as fine. If I run a full scan, it reaches 62% complete (i.e. 99% of the "left foot" criterion) and seems to freeze. I left alone for two hours to get that last percent of this test, then I just give up and cancel, so I was not able to complete a full scan.

  Also, often, when I start my computer first, I get a screen that says: "one of your disks should be checked for consistency.

  Then, he turns his thing and says it is finished and then starts.

  It seems to be very slow all the time, too.

  I also, lately, get a box saying my performance is slow, I want to move from Windows Aero to Windows basic to help performance.

  So I wonder, my hard drive takes a dump, or what? This system is only two years old.

  Thank you!

  Hi techrex, I would say by restarting and pressing F9 to enter the Diagnostics screen and run diagnostics on your HARD drive.  If you get an error I'd say calling HP support to see what they suggest - could be that your HARD drive is on its way.

  If this is the case, immediately save all your work, photos, emails, etc..  Make your recovery DVD (press F11 at startup and have up to 4 ready virgins of DVD quality to make your recovery disks.

  If you need to replace the HARD drive yourself, it will be easy to recover the PC with your recovery discs.

  Remember: use esd protection and always disconnect your PC from the network if you plan to open the chassis and replace the HARD drive or perform another task on your PC, like blowing any dust with a can of compressed air.

  I would like to know if this suggestion helps.

• An internal build error has occurred.  Please check the error log.

  All of a sudden today while working on a project, I got this error message in the issues window:
  
  "An internal build error has occurred. Please check the error log. »
  
  The background in the my application has been configured for white, now even that returns to the default gray
  
  Any help would be appreciated. The file of the only error I can find at the root of FlexBuilders is called hs_err_pid3140
  
  Thank you

  After a few hours of searching, I found a forum with a lot of these questions. I'm posting the links here just in case someone else has the same problem.

  Basically, it's a bug, and nobody really knows what the exact correction is... but some of the solutions have worked. For me, I copied my project files in a backup folder. Delete the project. Created a new project and copied the files back.

  http://tech.groups.Yahoo.com/group/flexcoders/message/69312

  http://tech.groups.Yahoo.com/group/flexcoders/message/68604

  http://tech.groups.Yahoo.com/group/flexcoders/message/62112

  http://tech.groups.Yahoo.com/group/flexcoders/message/61840

  http://tech.groups.Yahoo.com/group/flexcoders/message/57573

  http://tech.groups.Yahoo.com/group/flexcoders/message/51696

  http://tech.groups.Yahoo.com/group/flexcoders/message/41079

• Received the error when transferring data from the database file

  Hello...
  
  I have my using SOA 10.1.3.1.0. I am trying to transfer the data from the CSV of the oracle database.
  
  The settings of connection in file xml oc4j DBA adapter file in the path C:\product\10.1.3.1\OracleAS_1\j2ee\oc4j_soa\application-deployments\default\DbAdapter is shown below.
  
  < location connector-factory = name of the connector "ist/DB/DBConnection1" = "Adapter database" >
  < config-property name = "xADataSourceName" value = "jdbc/DBConnection1DataSource" / >
  < config-property name = "dataSourceName" value = "loc/DBConnection1DataSource" / >
  < config-property name = "platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/ >
  < config-property name = "usesNativeSequencing" value = "true" / >
  < config-property name = "sequencePreallocationSize" value = "50" / >
  < config-property name = "defaultNChar" value = "false" / >
  < config-property name = "usesBatchWriting" value = "true" / >
  < connection pooling using 'none' = >
  < / connection pooling >
  < use security-config 'none' = >
  < / security-config >
  < / connector-factory >
  
  
  I get the following error:
  
  < name of part = "summary" >
  < Summary >
  file:/C:/product/10.1.3.1/OracleAS_1/BPEL/domains/default/tmp/.bpel_FileToDb_v1.0_188277739ed1e0b720c1fefd0275d1c0.tmp/FileToAdapterService.WSDL [FileToAdapterService_ptt::insert (FiletodbCollection)] - SISM JCA Execute of operation "insert" has no reason to: could not create/access the TopLink Session.
  This session is used to connect to the data store. Caused by: loc/DBConnection1DataSource not found
  ; nested exception is:
  ORABPEL-11622
  Could not create/access the TopLink Session.
  This session is used to connect to the data store. [Caused by: loc/DBConnection1DataSource not found]
  See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Caused by the Exception TOPLINK-7060 (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.ValidationException
  
  Description of the exception: could not acquire data source loc/DBConnection1DataSource
  
  Inner exception: javax.naming.NameNotFoundException: loc/DBConnection1DataSource not found.
  < / Summary >
  < / part >
  
  
  What is the error in the loc/DBConnection1DataSource line? Guys thank you in advance...
  
  
  Thank you...
  
  Published by: userus007 on January 2, 2010 17:16
  
  Published by: userus007 on January 2, 2010 17:18

  Visit similar thread oc4j - RA.xml and data - sources.xml

• A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  Hello

  I get the below error message while my windows application inserts data in SQL Server.

  A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  I use LINQ-to-SQL.  SQL Server is installed on Windows server 2003.

  We are using SQL server 2008 r2.

  When we insert large data base records, approximately 1 million we get this question.

  Please suggest.

  Hello

  When you use Windows server, we ask you to send the query in the link depending on whether they are the experts.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Thank you.

• USB ports do not work, although I can charge my phone with the computer, it wont let me view my data from the phone.

  I had my computer about a month ago and it was working fine. But then, all ports usb stopped working on me. Although I can charge my phone with the computer, it doesn't let me see my data from the phone. I've tried everything.

  I'm guessing that this problem came from me turning off the computer by disconnecting it instead of turn it off manually.

  Help, please.

  Hello

  
  1. what happens when you try to connect any USB device to the computer? You receive an error message?
  2. What problem is specific to any USB device or all devices?
  3. what troubleshooting measures have performed up to now?
   
  Do the methods and check if it helps.
   
  Method 1
  Try to use the phone on another computer and check if you are able to access the data. If you have the same problem on another computer then the problem is with your phone. If you are able to access the data, then perform method 2.
   
   
  Method 2
  Reinstall the USB controllers.
  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
  (a) click Start, then type Device Manager in the start search box, and then click Device Manager.
  (b) expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  (c) once complete, restart your computer. Your USB controllers will automatically install.
   
   
  Method 3
  Run the fix - it tool and check if that helps.
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics
   
  Response with more information to help you.

• Generic procedure to load the data from the source to the table target

  Hi all

  I want to create a generic procedure to load data of X number of the source table to X number of the target table.

  such as:

  Source1-> Target1

  Source2-> Target2

  -> Target3 Source3

  Each target table has the same structure as the source table.

  The indexes are same as well. Constraint are not predefined in the source or target tables.there is no involved in loading the data from the business logic.

  It would simply add.

  This procedure will be scheduled during off hours and probably only once in a month.

  I created a procedure that does this, and not like:

  (1) make a contribution to the procedure as Source and target table.

  (2) find the index in the target table.

  (3) get the metadata of the target table indexes and pick up.

  (4) delete the index above.

  (5) load the data from the source to the target (Append).

  (6) Re-create the indexes on the target table by using the collection of meta data.

  (7) delete the records in the source table.

  sample proc as: (logging of errors is missing)

  CREATE or REPLACE PROCEDURE PP_LOAD_SOURCE_TARGET (p_source_table IN VARCHAR2,

  p_target_table IN VARCHAR2)

  IS

  V_varchar_tbl. ARRAY TYPE IS VARCHAR2 (32);

  l_varchar_tbl v_varchar_tbl;

  TYPE v_clob_tbl_ind IS TABLE OF VARCHAR2 (32767) INDEX OF PLS_INTEGER;

  l_clob_tbl_ind v_clob_tbl_ind;

  g_owner CONSTANT VARCHAR2 (10): = 'STG '.

  CONSTANT VARCHAR2 G_OBJECT (6): = 'INDEX ';

  BEGIN

  SELECT DISTINCT INDEX_NAME BULK COLLECT

  IN l_varchar_tbl

  OF ALL_INDEXES

  WHERE table_name = p_target_table

  AND the OWNER = g_owner;

  FOR k IN l_varchar_tbl. FIRST... l_varchar_tbl. LAST LOOP

  SELECT DBMS_METADATA. GET_DDL (g_object,

  l_varchar_tbl (k),

  g_owner)

  IN l_clob_tbl_ind (k)

  FROM DUAL;

  END LOOP;

  BECAUSE me IN l_varchar_tbl. FIRST... l_varchar_tbl. LAST LOOP

  RUN IMMEDIATELY "DROP INDEX ' |" l_varchar_tbl (i);

  DBMS_OUTPUT. PUT_LINE (' INDEXED DROPED AS :'|| l_varchar_tbl (i));

  END LOOP;

  RUN IMMEDIATELY ' INSERT / * + APPEND * / INTO ' | p_target_table |

  ' SELECT * FROM ' | '. p_source_table;

  COMMIT;

  FOR s IN l_clob_tbl_ind. FIRST... l_clob_tbl_ind LAST LOOP.

  EXECUTE IMMEDIATE l_clob_tbl_ind (s);

  END LOOP;

  RUN IMMEDIATELY 'TRUNCATE TABLE ' | p_source_table;

  END PP_LOAD_SOURCE_TARGET;

  I want to know:

  1 has anyone put up a similar solution if yes what kind of challenges have to face.

  2. it is a good approach.

  3. How can I minimize the failure of the data load.

  Why not just

  create table to check-in as

  Select "SOURCE1" source, targets "TARGET1", 'Y' union flag double all the

  Select "SOURCE2', 'TARGET2', 'Y' in all the double union

  Select "SOURCE3', 'Target3', 'Y' in all the double union

  Select "SOURCE4', 'TARGET4', 'Y' in all the double union

  Select 'Source.5', 'TARGET5', 'Y' in double

  SOURCE	TARGET	FLAG
  SOURCE1	TARGET1	THERE
  SOURCE2	TARGET2	THERE
  SOURCE3	TARGET3	THERE
  SOURCE4	TARGET4	THERE
  SOURCE.5	TARGET5	THERE

  declare

  the_command varchar2 (1000);

  Start

  for r in (select source, target of the archiving of the pavilion where = 'Y')

  loop

  the_command: = "insert / * + append * / into ' |" r.Target | ' Select * from ' | '. r.source;

  dbms_output.put_line (the_command);

  -execution immediate the_command;

  the_command: = 'truncate table ' | r.source | "drop storage."

  dbms_output.put_line (the_command);

  -execution immediate the_command;

  dbms_output.put_line(r.source ||) 'table transformed');

  end loop;

  end;

  Insert / * + append * / into select destination1 * source1

  truncate table SOURCE1 drop storage

  Treated SOURCE1 table

  Insert / * + append * / to select TARGET2 * in SOURCE2

  truncate table SOURCE2 drop storage

  Treated SOURCE2 table

  Insert / * + append * / into select target3 * of SOURCE3

  truncate table SOURCE3 drop storage

  Treated SOURCE3 table

  Insert / * + append * / into TARGET4 select * from SOURCE4

  truncate table SOURCE4 drop storage

  Table treated SOURCE4

  Insert / * + append * / into TARGET5 select * from source.5

  truncate table source.5 drop storage

  Treated source.5 table

  Concerning

  Etbin

• export data from the table in xml files

  Hello
  
  This thread to get your opinion on how export data tables in a file xml containing the data and another (xsd) that contains a structure of the table.
  For example, I have a datamart with 3 dimensions and a fact table. The idea is to have an xml file with data from the fact table, a file xsd with the structure of the fact table, an xml file that contains the data of the 3 dimensions and an xsd file that contains the definition of all the 3 dimensions. So a xml file fact table, a single file xml combining all of the dimension, the fact table in the file a xsd and an xsd file combining all of the dimension.
  
  I never have an idea on how to do it, but I would like to have for your advise on how you would.
  
  Thank you in advance.

  You are more or less in the same situation as me, I guess, about the "ORA-01426 digital infinity. I tried to export through UTL_FILE, content of the relational table with 998 columns. You get very quickly in this case in these ORA-errors, even if you work with solutions CLOB, while trying to concatinate the column into a CSV string data. Oracle has the nasty habbit in some of its packages / code to "assume" intelligent solutions and converts data types implicitly temporarily while trying to concatinate these data in the column to 1 string.

  The second part in the Kingdom of PL/SQL, it is he's trying to put everything in a buffer, which has a maximum of 65 k or 32 k, so break things up. In the end I just solved it via see all as a BLOB and writing to file as such. I'm guessing that the ORA-error is related to these problems of conversion/datatype buffer / implicit in the official packages of Oracle DBMS.

  Fun here is that this table 998 column came from XML source (aka "how SOA can make things very complicated and non-performing"). I have now 2 different solutions 'write data to CSV' in my packages, I use this situation to 998 column (but no idea if ever I get this performance, for example, using table collections in this scenario will explode the PGA in this case). The only solution that would work in my case is a better physical design of the environment, but currently I wonder not, engaged, as an architect so do not have a position to impose it.

  -- ---------------------------------------------------------------------------
  -- PROCEDURE CREATE_LARGE_CSV
  -- ---------------------------------------------------------------------------
  PROCEDURE create_large_csv(
      p_sql         IN VARCHAR2 ,
      p_dir         IN VARCHAR2 ,
      p_header_file IN VARCHAR2 ,
      p_gen_header  IN BOOLEAN := FALSE,
      p_prefix      IN VARCHAR2 := NULL,
      p_delimiter   IN VARCHAR2 DEFAULT '|',
      p_dateformat  IN VARCHAR2 DEFAULT 'YYYYMMDD',
      p_data_file   IN VARCHAR2 := NULL,
      p_utl_wra     IN VARCHAR2 := 'wb')
  IS
    v_finaltxt CLOB;
    v_v_val VARCHAR2(4000);
    v_n_val NUMBER;
    v_d_val DATE;
    v_ret   NUMBER;
    c       NUMBER;
    d       NUMBER;
    col_cnt INTEGER;
    f       BOOLEAN;
    rec_tab DBMS_SQL.DESC_TAB;
    col_num NUMBER;
    v_filehandle UTL_FILE.FILE_TYPE;
    v_samefile BOOLEAN      := (NVL(p_data_file,p_header_file) = p_header_file);
    v_CRLF raw(2)           := HEXTORAW('0D0A');
    v_chunksize pls_integer := 8191 - UTL_RAW.LENGTH( v_CRLF );
  BEGIN
    c := DBMS_SQL.OPEN_CURSOR;
    DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
    DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
    --
    FOR j IN 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
      WHEN 1 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      WHEN 2 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
      ELSE
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      END CASE;
    END LOOP;
    -- --------------------------------------
    -- This part outputs the HEADER if needed
    -- --------------------------------------
    v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_header_file,p_utl_wra,32767);
    --
    IF p_gen_header = TRUE THEN
      FOR j        IN 1..col_cnt
      LOOP
        v_finaltxt := ltrim(v_finaltxt||p_delimiter||lower(rec_tab(j).col_name),p_delimiter);
      END LOOP;
      --
      -- Adding prefix if needed
      IF p_prefix IS NULL THEN
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      ELSE
        v_finaltxt := 'p_prefix'||p_delimiter||v_finaltxt;
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      END IF;
      --
      -- Creating creating seperate header file if requested
      IF NOT v_samefile THEN
        UTL_FILE.FCLOSE(v_filehandle);
      END IF;
    END IF;
    -- --------------------------------------
    -- This part outputs the DATA to file
    -- --------------------------------------
    IF NOT v_samefile THEN
      v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_data_file,p_utl_wra,32767);
    END IF;
    --
    d := DBMS_SQL.EXECUTE(c);
    LOOP
      v_ret := DBMS_SQL.FETCH_ROWS(c);
      EXIT
    WHEN v_ret    = 0;
      v_finaltxt := NULL;
      FOR j      IN 1..col_cnt
      LOOP
        CASE rec_tab(j).col_type
        WHEN 1 THEN
          -- VARCHAR2
          DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        WHEN 2 THEN
          -- NUMBER
          DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_n_val);
        WHEN 12 THEN
          -- DATE
          DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_d_val,p_dateformat);
        ELSE
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        END CASE;
      END LOOP;
      --
      v_finaltxt               := p_prefix || v_finaltxt;
      IF SUBSTR(v_finaltxt,1,1) = p_delimiter THEN
        v_finaltxt             := SUBSTR(v_finaltxt,2);
      END IF;
      --
      FOR i IN 1 .. ceil( LENGTH( v_finaltxt ) / v_chunksize )
      LOOP
        UTL_FILE.PUT_RAW( v_filehandle, utl_raw.cast_to_raw( SUBSTR( v_finaltxt, ( i - 1 ) * v_chunksize + 1, v_chunksize ) ), TRUE );
      END LOOP;
      UTL_FILE.PUT_RAW( v_filehandle, v_CRLF );
      --
    END LOOP;
    UTL_FILE.FCLOSE(v_filehandle);
    DBMS_SQL.CLOSE_CURSOR(c);
  END create_large_csv;
  

• Read data from the text column in report

  I have a sql report with an editable column created using apex_item.text (5);
  
  I tried to read and insert the data from the column in a table, using this process
  
  because me in 1.apex_application.g_f05.count
  loop
  insert into table (col_a, col_b)
  values (apex_application.g_f05 (i), apex_application.g_f04 (i));
  commit;
  end loop;
  end;
  
  but without success.
  
  The message when I execute is ORA-01403: no data found.
  
  What is the error?

  HI lkefur,

  Try to debug it.

  The reason behind this is that your report do not have the of4, fo5 (one) as text fields at all.

  try to delete value n f04 normal text and check, even to f05.
  I think that most probably the reason whether shud.

  You can view only the source of the page and check which names are your text fields of the report to help.

  Kind regards
  Nandini thakur.

• B2B is collecting data from the IP_IN_QUEUE

  Hello
  We have 810 process dating to the doc revision number 5010. Although we pass all required header required by B2B settings, then too is not the collection of data from the IP_IN_QUEUE.
  The data is generated from Oracle Apps and passed to SOA that sends data in this B2B Queue.FRom this queue server B2B should choose the data automatically and treat, but this isn't the case.
  We are too ignorant as any error in the logs of B2B.
  Please share your ideas.
  
  Concerning
  AYUSH

  Hi Mary,

  then too is not the collection of data from the IP_IN_QUEUE

  B2B selects data from IP_OUT_QUEUE. Please configure consequence. IP_IN_QUEUE is for incoming messages.

  Kind regards
  Anuj

• Remove data from the HD Server?

  I've recently updated my OS to 10.12 Sierra and went to install Server.app. However, when trying to install Mac OS Server, I received the following message:

  "This the server version does not support upgrading the server from data on this volume. To upgrade your database server, you need to install an older version of the server and OS X."

  ***? In what universe would be an acceptable solution? Now, the fact is that I probably had installed Server.app before on a very old version of Mac OS (not sure which) and just never bothered to upgrade during the last major revision of OS X or more.

  What that is, how can I get rid of these old "data server" so I can install a new copy? Thank you.

  Wondering how to remove the data from the server that you had before the upgrade to Sierra? If so, delete the folder/Library/Server and the.app to / applications. Then go to the App Store and buy the latest version of the server. I'm guessing that your last purchase server had Yosemite and that's why try to install the server to the App Store / Shopping does not work. I did purchase the server from Yosemite.

• How to erase data from the iphone if I lost and iphone is offline

  How to erase data from the iphone if I lost and iphone is offline

  < post branched out by host >

  Hello

  What to do if your iOS device is turned off or offline?

  If your missing device is turned off or offline, you can still implement this Mode lost, lockor remote wipe. The next time your device is online, these measures will take effect. If you remove the device from your account while it is offline, pending actions for the device will be cancelled.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox.
  Try the sites secure web. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• Unable to delete the data from the Safari Web site...

  Hello.

  I need help with my Safari browser on my Mac.

  Im trying to remove all Web site data with the following procedure:

  Safari-> Preferences-> privacy-> Remove All Data Web site...

  His does not work. Before clicking on the button I have 108 Web sites stored cookies or other data, I click the button, and nothing happens... I'm still 108 cookies.

  I also did the following:

  . - activate the Menu developer and Cache empty and tried again... nothing

  . - used CleanMyMac v3 and it says I don't have cookies.

  . - order iCloud Sync of Safari on the computer and try again... same problem

  . - removed manually com.apple. Safari. Secure

  Any help will be great. Please let me know if you need any additional info.

  Thank you.

  Hello DZanvettor,

  Thank you for using communities of Apple Support.

  If I understand your message that nothing happens when you try to remove the Safari Web site data. I know how it is important for you to be able to remove the Safari Web site data. I recommend that you restart your Mac into safe mode and see if you can remove the data from the Web site in secure mode.

  Here are the steps to restart your Mac in safe mode:

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening.

  From your Mac in safe mode does the following:

  * Check your startup disk and attempts to fix problems if necessary directory
  * Loads only required kernel extensions
  * Prevents the elements start and the login items open automatically
  * Disables installed user fonts
  * Delete font caches, hiding the kernel and other files of the system cache
  * Together, these changes can help resolve or isolate issues related to your startup disk.

  Follow these steps to start in safe mode.

  1. start or restart your Mac.
  2. as soon as you hear the startup tone, hold down the SHIFT key.
  3. release the SHIFT key when you see the Apple logo appears on the screen.

  After you delete data from the Web site in safe mode restart your Mac and allow it to start up as usual. Then test the issue again.

  Best regards.

• How to recover data from the browser tabs?

  Hello

  I am trying to retrieve data from the Firefox browser by dragging the tabs in a Windows/Mac/Linux application. Specifically, I was hoping to capture medadata HTML and video current time (for example, 01:23 05:00) YouTube pages for storage off favorite browser and reactivation.

  I couldn't find an online help or the documentation dealing with this issue.
  Any suggestions?

  Thank you

  There is an additional command that is added at the end of the url of Youtube. You need to add & = t * m * s at the end of the url. Where the asterisks are, replace you them with numbers. For example: http://www.youtube.com/watch?v=Zb7gTeLmpHs & t = 3m24s

  The m is s for seconds and minutes.

  You can also find this information by loading a video from Youtube, by dragging the time slider to the time you want to pause the video, and then right-click on the video and choose:
  
  'Copy the URL of the video at the present time'.