Hard drive data from the sector error on desktop HP Pavilion magnesium grey Edition p6404y

Similar Questions

• Pavilion 15 ab128na: hard drive upgrade from the Pavilion 15-ab128na

  Hello

  I am buying a laptop computer ab128na Pavilion 15 and wanted to know about upgrade capabilities.

  It comes with a disc of M.2 256 GB SSD but it maybe a bit small. Is there room for an additional HARD disk drive (such as the gaming notebook pavilion)? So I, for example, M.2 256 GB SSD drive and a 1 TB HARD drive.

  Or the model allows only for 1 hard drive, so I have to replace the SSD drive, it comes with a larger capacity SSD?

  Thanks in advance

  Here is the Service Manual:

  Manual

  This manual explains Star Wars Edition and the 15-ab128na sharing the same internals with this model.

  The problem is if your laptop comes with just the MSSD m2 I don't think they understand the mounting kit for a 2.5-inch hard drive. You must purchase the part on the secondary market in some way.

  Kit hardware hard drive (supports and connector) 809296-001

  http://www.eBay.com/ITM/809296-001-HP-15-AB027CL-hard-drive-caddy-Kit-grade-A-/171992018156?hash=item280b85ecec:g:2SgAAOSw7hRWPoW0

  In addition, access to the hard drive Bay is a bit of a chore and put security at risk.

  But to directly answer your question, the laptop is designed to have a m2 and the SATA 2.5 inch disk at the same time.

  You could also install a HDD as pure storage using the slot of the DVD drive with an adapter. Of course, you lose the optical drive but I find myself with mine very rarely these days, anyway. Use of this Bay, the warranty will not be affected.

  Let us know if you need help most.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Shrink the hard drive (data in the data store file)

  Hello, I created a virtual machine with a 50 GB HD on ESXi 4.0.

  After installing all the software, I noticed that I am currently using only 5 GB of space and I need to support this thesis often I want to shrink the partition to 15 GB.

  The OS is Linux with LVM and it's great that I can move/shrink/expand with not too many questions, but how do I shrink a file of data existing in vmware?

  Get full even a migration between the old file and another smaller.

  A tip on how to get started with it?

  Thanks and greetings

  bellocarico

  The command of the is not available on ESXi.

  Maybe you can copy a static version of a Linux system, but I have not tried.

  André

• copy the data from the old HARD drive to a new HARD drive

  have old hard drive with data and op sys - must copy old hard drive data on the new hard drive WITHOUT copying op sys

  a simple way is the best way.

  Help, thanks

  Hello

  1. purchase a USB hard drive enclosure to put the old drive hard in > plug it into the new computer.

  Here is a video on how to do it:

  http://www.YouTube.com/watch?v=SLLQusrmzvI

  2 slave the old hard drive in the new computer, so a new office.

  http://www.WikiHow.com/configure-master-and-slave-in-BIOS-for-two-hard-drive-disk-in-a-single-system

  See you soon.

• Unable to transfer data from the laptop hard drive external/pendrive.

  Dear Experts,

  Unable to transfer data from the laptop hard drive external/pendrive.

  Each time that tried to transfer meesage seems to the authorization of the administration.

  Kindly help me to solve the problem.

  Concerning

  Hello

  Follow these steps and check:

  To take ownership of a folder

  a. click on the USB key you want to learnand then click on Properties.

  b. click on the Security tab, click Advanced and then click on the tab owner.

  c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click on the name of the person you want to give to the property.

  e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

  f. click on OK.

• In Vista, after you delete all data on hard drive, now get the access denied error

  I deleted all the data from my hard drive. everything works, but I can't copy or move my files anywhere. When I opened my hard drive, access is denied. I connet Internet can´t or other. I ve tried to use the restoration of the system, but still the same.

  Hello

  ·         You met any question which did you to remove the data from the hard drive?

  ·         What happens when you try to connect to the internet?

  ·         How the hard drive is connected to the computer? Thanks to a USB or SATA cable?

  Method 1:

  Take possession of the location/folder where you want to copy the files to:

  To take ownership of a file or folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Method 2:

  Try checking the boot, if the problem persists:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer to normal startup by following step 7 from the link above.

• How to move data from the old hard drive to a new operating system, games, songs, vista etc.

  you want to install more hard drive. How can I move all of the data, os, games, music, etc.

  and have computer always starts.

  Hello

  You cannot move by themselves programs

  you need to reinstall it from the original media

  read this about moving everything, including the operating system

  or save your data and reinstall clean vista

  There are different ways to do

  hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html

  also to put your machine how you bought:

  1. that vista is preinstalled, you should have a recovery on your old hard drive partition

  You can recovery disks to reinstall on your new hard drive

  ask the manufacturer of the machine how

  2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  3. or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Save all data, because it will be lost, do the above

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

• transfer the data from the portable hard drive

  My computer laptop dv6910us primer is more. How can I transfer the data on the hard drive removed from my new laptop. I learn that the hard drive is "owner" for normal usb adapters that connect directly on the hard drive to transfer data do not connect to mine. Pls help!

  It is not IDE is the normal dv6500 and superior hard drive adapter. As stated in the first post, if you remove the extra plastic piece... voila! an ordinary laptop SATA drive. It seems that it is part of the training, but I "guarantee" If you pull, it will detach.

• I try to start the old T2150CDT - error message "not found reading drive C of the sector.

  Hello

  I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.

  Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.

  So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)

  Install the right drivers for the CD Rom would allow me to install from a CD?

  It works usually
  Thank you
  John

  As far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
  -physical HARD drive failure
  -corrupted HARD drive file system
  -Bad RAM

  In the first case, you should try to format the whole HARD drive and should try to install the new OS.
  If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced.

• Error: The drive cannot find the sector requested: 0x8007001B) during execution of the backup on DVD

  I tried to backup using a DVD, as usual, but without success. Back to the high status and Configuration States:

  Upward did not complete successfully
  Original title: back to the top has not completely filled.

  An error has occurred. The following information can help you resolve the error:)

  The drive cannot find the sector requested:
  0x8007001B)

  I've looked everywhere for this problem... need help :)

  Babette

  Hello

  1. have you done any software or hardware changes on your computer before this problem?
  2. have you checked with another DVD drive?
  3. using the Windows backup feature to backup?
  4 do you have third-party backup programs installed on your computer?
   
  To work on the issue, refer to these methods.
   
  Method 1:
   
  Step 1:
   
  If it's a DVD I suggest trying to backup to an external hard drive and check to see if you get any errors.
  
  Step 2:
   
  Temporarily disable the antivirus software and check if you are able to perform the backup.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
  
  Set up or change automatic backup settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings
  Change when you save your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-files
  Method 2:
   
  I suggest you check for errors of hard disk on the drive you want to back up.
   
  Check your hard drive to find errors in Windows 7
  http://support.Microsoft.com/kb/2641432
   
  NOTE: the steps also apply to Windows Vista
   
  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  Hope the information is useful.

• This program of windows xp is on a Macbook Pro with a PC emulator. The drive needs to be replaced. How can I save the data from the side PC?

  This program of Windows XP (my wife) is on a MacBook Pro with a PC emulator (Bootcamp).  The drive needs to be replaced.  How can I save data from the PC to an external hard drive?

  Hi Alan,

  Thanks for posting in the Microsoft Community.

  I understand you are trying to backup the data on external hard drive since you replace the hard drive.

  I will definitely help you with this.

  Please visit the links; This should help you in files and backup files.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

  http://support.Microsoft.com/kb/308422

• Cannot start from the CD: Error Code 5. __Asking driver primary IDE channel.

  I install a new copy of windows 7 on my old computer. My computer have no major problems from Advisor Windows 7 report. When the system boots on the DVD I got the error message cannot START FROM the CD: error 5 CODE. Also, I can't start XP installation. When I get to the part on which partition to install I got the message to load a driver. He asks me to load a driver for the MAIN IDE CHANNEL. I have search on Intel, Gigabyte and other internet sites but have not found a specific driver.
  My computer is:
  Processor Intel P4 1.7Ghz
  15 GB OF RAM
  GeForce 7600GS
  320 GB IDE HARD DRIVE
  Card mother Gigabyte GA-8ITX3
  Intel 820 Chipset family with 82801BA (ICH2) I/O controller.

  Help, please!

  P.S. noticed that 2Angel had a similar problem but no solution.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS may also help.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. The recycled player I

  I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. They are recycled the disc immediately (like crazy, I don't ask for this return to get the data off it.) But fortunately, I have all my data on CrashPlan. I downloaded it and it was working fine except that I downloaded it on the desk and not the original location so he had succeed. I also have an external 1.5 TB drive that I wanted to make it bootable, so I installed Mavericks 10.9.3. Then I advanced and installed on disk newly installed too.

  I think that because I have a new reader that adobe thinks, I have a new computer. I bought the 27 "Mac new on Ebay and it came loaded with the software, including CS6. I have a serial number for CS6, but Adobe says that it was not valid. (I've owned CS2 and CS4 now CS6 that came preloaded on the Mac by the seller who told me that the software has been registered for the Mac?

  I'll re - download the backup to the original location but this time (I still don't think that it will work with Adobe.) What can I do about it?

  iMac 27 inches, end of 2012

  Processor 3.2 GHz Intel Core i5

  Memory 32 GB 1600 MHz DDR3

  Graphics  NVIDIA GeForce GTX 1024 MB 675MX

  Software  OS X 10.9.3 (13D 65) @.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• Can I have macbook start up from my external hard drive instead of the internal HD of the laptop?

  I use a macbook air 2014 model and would like to know if I can boot the mac from an external hard drive rather than the inside. The reason to do this is to save space on the laptop and updates can be installed directly on the external hard drive.

  Is this possible? Forgive me, because I'm not that tech savvy. Thank you in advance!

  Yes. Install or clone of Mac OS X on it and then select it in the pane of the system preferences Startup disk.

  (143481)

• Suite CS6 can be redownloaded from Adobe? Had to wipe the hard drive and all the programs went

  Suite CS6 can be redownloaded from Adobe? Had to wipe the hard drive and all the programs went

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html