Similar Questions

• Convert unix timestamp to date after the change to daylight saving time

  Hello
  
  in one of the products, we use internal Scheduler stores dates (and times) in a format Unix, which is seconds since January 1, 1970. We used this SQL to extract the effective date:
  
  To_char (t.next_fire_time /(24*60*60*1000) + to_date('19700101020000','yyyymmddhh24miss'), 'yyyymmddhh24miss')
  
  Everything worked well until that time has changed this weekend from UTC + 2 to UTC + 1 (we are located in Eastern Europe). Since then, the above query returns an hour later than planned.
  
  I.e. of timestamp * 1320067800000 * is returned as * 20111031153000 * even thought is correct (and the actual time, the event was planned) * October 31, 11 PM 02.30.16.000000 *.
  
  I found queries like this on various forums and nobody seems to care of DST. Is this a configuration problem in the DB or is this a bug in our code?
  
  I tried selecting the SESSIONTIMEZONE and the DBTIMEZONE and both were + 1.
  
  Any help appreciated.

  Your problem is coded hard 2 hours shift:

  TO_DATE (19700101'020000', 'yyyymmddhh24miss')

  You need to calculate the current offset to adapt it to the current situation of DST:

  with sample_table as (
                        select date '1970-01-01' + 1320067800000 / 1000 / 3600 / 24 dt_utc from dual
                       )
  select  dt_utc,
          dt_utc +
          extract(
                       timezone_hour
                  from
                       from_tz(cast(dt_utc as timestamp),'utc') at time zone 'Europe/Prague'
                 ) / 24 dt_prague,
          extract(
                       timezone_hour
                  from
                       from_tz(cast(dt_utc as timestamp),'utc') at time zone 'Europe/Prague'
                 ) tz_offset
    from  sample_table
  /
  
  DT_UTC              DT_PRAGUE            TZ_OFFSET
  ------------------- ------------------- ----------
  2011-10-31 13:30:00 2011-10-31 14:30:00          1
  
  SQL> 
  

  SY.

• Dreamweaver CS3 crashes when creating forms

  Not sure what's going on here. I have built several sites not containing the standard shape handles again no problem. Now all of a sudden when I open a particular page it causes DW to crash. Today, I created a new form page which had no problem then I realized that I would need to cut out the shape in two pages because it was too big for a single page.
  
  I cut half of the form and pasted into a new blank template page then record successes and of course, crashed and now does not open in DW without causing a system crash.
  
  Anyone seen this before?

  Has this happened before the end of Daylight Savings Time?

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb402776

  --
  Nancy O.
  ALT-Web Design & Publishing
  www.Alt-Web.com

• Halo 2 crashes after the level "Gravemind".

  Halo 2 still crashes after the cutscene at the end of the level "The Gravemind".  The game acts like it's loading to the next level with the logo of Halo 2 and the vertical lighting of back and forth set.

  I had to play at this level twice, otherwise I can't get any achievement.  I'm tired of having to play at this level.
  My computer specs:
  AMD Phenom II X 4 955 3.2 Ghz Black Edition
  ATI Radeon 9870 x 2 1 GB GDDR5 Ram
  1 TB Western Digital Black
  ASUS M4A79T Deluxe Motherboard
  8 GB DDR3 1600 MHz Ram

  Hi Chuckthetekkie,

  Welcome to Microsoft Vista answers Forum!

  The system requirements for your computer is fine.

  I have a few here that might solve the problem.

  I suggest you perform the clean boot which disable the application non-Microsoft temporarily in conflict with programs. It helps us find what third-party application or service is causing the problem. Follow the steps in the link: how to troubleshoot a problem by performing a clean boot in Windows Vista: http://support.microsoft.com/kb/929135 Note: make sure to put the computer in a normal state, proceed to step 7 in the link. After you find out which application is causing the problem, please disable the program or application. If the problem persists, I suggest you to visit the site of the game Halo 2 to find if there are any updates or patches.

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to do a video opening and to redirect to another page after the end of the video, how do?  No matter what widget or code can do?

  I want to do a video opening and to redirect to another page after the end of the video, how do?  No matter what widget or code can do?

  Can do in muse and I tried to use dreamweaver like the code below:

  <! doctype html >

  < html >

  < head >

  < / head >

  < body >

  < style >

  {#video_background}

  position: fixed;

  Bottom: 0px;

  right: 0px;

  min-width: 100%;

  min-height: 100%;

  Width: auto;

  height: auto;

  z index:-1000;

  overflow: hidden;

  }

  < / style >

  < video id = "video_background" preload = "auto" autoplay no Cup >

  < src = "source opening.webm" type = "video/webm" > "

  < src = "source opening.mp4" type = "video/mp4" > "

  This browser does not support video

  < / video >

  < script type = "text/javascript" >

  {document.getElementById('video_background').addEventListener ('ended', function ()}

  window.location.href = ' http://www.xxxx.com';

  (}, false);

  < /script >

  < / body >

  < / html >

  adeletsang wrote:

  Thanks for your reply.

  I just need to click on "object > insert html ' muse and paste the code there?

  My video ID is video_background which is defined by the widget by default, I should change the code below:

  The site I posted has no video in there and I don't have the widget that Peter sugested however, you can replace the startup code Nacy O made (the black with bit blob going around it) and it should work... understand that a ve\ideo will have to be downloaded by your browser clients before they can see it, so it's another delay for them.

  The code you posted is the code of downtime and that seeks a DIV not called "intro" so no do not change his name...

  A mandatory opening text

  After 5 seconds, this block will disappear.

  Everything between the two div tags is startup code and replace you it with you video and then use the muse "object > insert html" tool to place on your page.

  The demo includes three bits;

  • the body or the div tag is the code shown above and goes into the tool "insert html".
  • a header code that defines styles i.e. the yellow background and text... cela goes in your location of metadata page

  

  • The final code is the timeout in jQuery you had but do not change the name to the background image unless you also change the name of your div to match... Nacy O put it in its footer code that is correct for DW, but Muse has no footer as such area so I used a master metadata slot to the same effect. The important point is that it descends UNDERNEATH other codes.

  Have a play with it and see how you go...

• STOR. E TV + restarts after the end of the video

  In recent weeks, my store tv + a began to restart after the ends of video files.
  At the * end of file the sistem restarts little whatever it is I'm trying to fix in the options *.

  Can someone suggest how to solve this problem?

  Thank you
  Francesco

  Hello

  Did you try to settle the Store.E TV + to default settings?
  To do this

  At the point of the system configuration, you will find the option restore by default.
  This will help you restore the default settings.

• How to free the memory after the end VI

  The data is collected once in a loop and added to a table of data. The collection was completed after the loop ends and a data table was built. In the end, the data has been written to a file. The program ended naturally. I guess that all the variables are erased from memory after the end, but it wasn't. If I run the program twice without closing, I have a set of newly collected data added to the 'old', which was created in my last run. A third series has been added if I run it once more.

  I just want to keep the last function as my data and I don't want to close the program to set all my settings to similar races. How to do?

  A sample file is attached.

  Thank you.

  You need to wire a constant empty table to the Terminal (lower bound) of the feedback node initializer.

• Windows 7 64 x computer with up-to-date Norton 360 crashes after the last update__ critic

  Windows 7 64 x computer with up-to-date Norton 360 crashes after the last critical update. I had to go back to a recovery point before the last installed update. I had Norton 360 for nine with no previous Windows Update problems

  It seems to work after a reboot and a new attempt to update norton.   First, it froze.   I connect this because I heard that several win 7 64B machines at work had to be restored on 1/12 after a bad update.  I don't know if they also had norton.

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• Existing Windows updates will still be available for download after the end of the world?

  Even though I am well aware that the Extended Support for Windows XP ends April 8 next year, I wonder if it will be possible to download existing updates to update of Windows, including Service Pack 3, after the end of the Extended Support phase.

  Thank you
  Thomas

  I wonder if there is a way to download all the updates relevant at a time, in a sort of package instead download and install each one, one.

  If you mean every single security update (and Service Pack) that is never released for Windows XP (that is, since August 2001), God not!

  If you end up needing to do a clean install of Windows XP after Q 2, 14, you would be better to replace the computer! [1]

  PS: Get a computer fully patched after doing a clean install of Windows XP Gold (no Service Pack) may take 24 hours or more!

  ================================================================

  [1] I have resisted to replace my laptop Windows XP 9 year and enjoyed for years. Then end of December 2012, I realized that something other that a new Win8 computer would soon be almost impossible, so I gritted my teeth & get a Win7 (64 bit) laptop for a very reasonable price IMHO. Find it was a bit of a challenge.

• Windows Update after the end of life for xp.

  I'll be able to download the updates at the end of life for xp sp3 - after the end of life for xp?

  If you want what will be (hopefully) proved to be a definitive statement of Microsoft, more information here on XP after April 8, 2014...

  http://www.Microsoft.com/en-us/Windows/enterprise/endofsupport.aspx

  Most of the people here do not work and can not talk or on behalf of Microsoft.

  Tricky

• Will be - this safe to use XP behind a firewall after the end of LIFE?

  I have a netbook that I use as an external 1 TB NAS with a hard drive device on my LAN.  I use it also for connection of MagicJack.  I have a firewall in my router and the only thing that that accesses this machine online is updated antivirus and places / receives calls from Magic Jack.  I don't respect the minimum specifications for Windows 7.

  If I keep this machine behind the firewall and prevent web access, it will be safe to stay with XP after the end of life?  MagicJack is a security breach?  My only other option is to switch to a Linux distribution, but I need to configure to run on a Windows network and it seems that you have to do back flips to get the MagicJack to work on Linux.
  Any advice will be appreciated.

  End of the security updates is something much more...

  antivirus support, but again, you are not protected completely...
  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_updating/Microsoft-will-continue-to-provide-updates-to-our/3ecaa09a-Abda-44f7-BCE3-91375c47b325

• Can I still use Windows XP after the end of support?

  I've always found XP easier to use and more effective than the two 7 and Vista and for this reason I have currently no intend to update, even after the end of support. However, to make sure it works please.

  You can still use it but less and less software will be written for it, also there is no update, and if you have a microsoft problem will not be able to help you.

• Activation after the end of support?

  It will be possible to reactivate an installation of Windows XP after the end of the support in 2014? I intend to keep an XP system to run old programs and worry about what happens if I need to reinstall it.

  When MS XP launched in 2001, they promised that the activation would be available to certain (undefined) point in the future, date at which they would make available a patch to remove the requirement.

  I believe that to be the case.

• Win XP crashes after the splash screen (charge PointSec)

  I have a laptop lenovo t400, which has Pointsec Encryption (6.1.3), and WinXP loaded thereon.

  I ran the update tool think that Vantage Lenovo that has downloaded and installed a number of updates - I didn't run it for centuries.

  Now when I try to start the computer it crashes after the XP splash screen is displayed. Simply, the screen goes black.

  I tried the options Mode safe (include VGA Mode and start with the last successful configuration) without success. Also, they fail to start.

  The flow rate is:

  Power On, screen authentication PointSec, Win XP Splash screen, and then a black screen

  I got successfully into the system using UBCD4Win with pointsec plugin loaded, load a WinPE environment on a USB and allows me to access the C: drive unencrypted (as I've authenticated with Pointsec).

  I'm really stuck for ideas as to the update is the cause of the problem and I'd love to hear some suggestions on how to remedy this situation.

  --

  Additional information:

  The last lines in ntbtlog.txt is:

  Not load the parallel driver live

  Did not load driver bios SM service

  Did not load driver SM bus service

  Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS

  Search:

  c:\Windows\$NtServicePackUninstall$

  Looks like that Service Pack 3 has been installed:

  File: spuninst\spuninst, inf shows:

  NtServicePackVersionText = "Service Pack 3".
  NtServicePackPreviousVersionText = "Service Pack 2".

  Fixed!

  The problem has been updates to lenovo (probably guilty being the video driver that I presume).

  Using UBCD4Win with pointsec plugin I was able

  * Access to the decrypted c:

  * Restored manually updates to c:\windows\system32 and c:\windows\system32\drivers

  Original files have been found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles

  * Finally, I had to roll back updates of the register who did the updates. UBCD4Win offers a tool to do this: the registry Restore Wizard. He basically just look in c:\System Volume Information System Restore directory and lists all the Restore Points available (Fortunately the Lenovo updates mark a restore point until they run). You can also do it manually using the following instructions:

  http://hypography.com/forums/tutorials-and-how-tos/17193-XP-recovery-instructions-for-UBCD4Win.html

  This makes the system successfully booted.

  I've most definitely will be staying clear after you press the big blue button in the future. It was a nightmare to fix.