Dreamweaver CS5.5 removing Code when copying a file

Similar Questions

• Dreamweaver CS5.5 mac crashes when you use the background color palette

  Dreamweaver CS5.5 mac crashes when you use the background color palette

  Mac OS 10.11.3 El Capitan

  Hi bibledoc

  You can try to reset the Dreamweaver preferences.

  Following the file and the folder are removed from your system:

  / Users / your User Name/Library/Application Support/Adobe/Dreamweaver

  Rename the folder of Dreamweaver preferences, for example, Dreamweaver CS5.5 Old_Dreamweaver CS5.5 folder.

  / Users / your user name/Library/Preferences

  Rename the folder of Dreamweaver preferences, for example, Dreamweaver CS5.5 Old_Dreamweaver CS5.5 folder.

  Restore preferences in Dreamweaver CS4 and CS5, CS5.5

  Access the hidden library files Mac OS

  When Dreamweaver starts, it creates a new preferences file and the folder.

  If it helps doesnot, maybe you can try to create a new admin user account and check. If this is useful, you can try to uninstall and reinstall in the new user account.

  OS X Yosemite: set up users on your Mac.

  Kind regards

  Nikhil Gupta

• "Dreamweaver CS5, < img src =". When I type the 'Browse doesn't appear.

  "Im using Dreamweaver CS5 when I try to add a picture to my HTML source code I type < img src =". When I type the 'Browse doesn't appear.

  ptree14 wrote:

  Thanks for the quick response. I checked that and it is turned on.

  I noticed that if I create a new HTML document, I can do the

  After the and before the  It works very well. Only, it will not work anywhere under the

  Like this

  

  

  Place a it is not valid and would probably DW go batty.

  DW dislike html errors, actually, even tiny errors that browsers completely ignore can send DW in spasms. Browse your page of the validator to http://validator.w3.org to ensure that you are not missed something simple, especially a closing "or ending tag like.

• Why the FTP of Dreamweaver CS5 is remove my files the?

  "Selected" default mode LOCAL files are deleted when I select REMOTE for deleting files. REMOTE files remain, the LOCAL files are irreversibly removed forever.

  Please read this post on the subject (screenshot in post):http://stackoverflow.com/questions/3191425/has-dreamweaver-cs5-been-deleting-local-files-i nstead of remote files

  My request for time to devote to fixing this problem was rejected by management. I am at a loss and have nowhere to go now - I am also attached using Dreamweaver CS5.

  Nightmare.

  Adobe are aware of this bug and it will address in there next update.

  There is a simple work around where you don't have to change views.

  (1) select the remote file, the files or folders you want to work with.

  2) click on the Refresh button at the top of the files Panel.

  (3) select the remote file, the file or folder you want to work with again.

  (4) make a right click and choose 'delete '.

• Why Dreamweaver CS5 is remove my server login information?

  I had a terrible time with some of the common features of Dreamweaver CS5 does not properly.  Now I have another: she goes ahead and deletes my login and password.  It happened five times in the last three days on two different sites I work on and drives me crazy.

  What happens is that I get an error message saying that the FTP can not connect with the server.  I'm in Manage Sites, and the login and password fields are empty.  I fill them in, and now I can connect to the server.  Then at one time random, it could be later that day, he might be the next day, I get the error message, see Manage Sites and they are white again.

  I updated for Dreamweaver 8 two weeks ago and I'm starting to really, really hate this program.  I lost so much to deal with things which don't work well, and it represents significant income loss for me.  I got in one of the Design Collections, but plans really go back to version 8, which is not a lot of new features, but at least the things everyday functioning properly.

  I am running Mac OS 10.6.4 on a Mac less than 6 months.

  -Helen

  Also try

  Dreamweaver CS5 losers quit/launch FTP details

  http://forums.Adobe.com/thread/645458

• Re: Satellite Pro U400-160 - freezes when copying larger files or videos

  Hello:

  I have a Satellite Pro U400-160 and a VERBATIM external hard drive USB eSATA combo.

  If I turn on AHCI mode recognizes the drive, but when copying the video files or large file size, the system is frozen. However if I remove the mode AHCI works correctly. I have the version 9.8.9.1023 Intel (r) Matrix Storage Manager and my laptop BIOS v4.0 and Windows Vista Business.

  Thanks in advance.

  Hello

  Normally the AHCI mode has nothing to do with an external HARD drive. It is only important for the internal HARD disk if you install Windows.

  Anyway, you have installed all the updates of Windows for Vista?
  In addition, you should test another external HARD disk or with another cable.

  Welcome them

• When copying a file in flash memory, a shortcut of the file is created with! Why is this happening?

  When I copy a file in flash memory a shortcut depending on the size of 1 KB from the file is created with the original?

  is this a virus?
  What is the solutions for that?

  Sorry, I misread your question. I thought that you receive only a shortcut.

  I don't know what would cause. Have you tried with another flash drive? Have you tried to format the flash drive that you use, when there is nothing on what you need?

  It won't hurt a thing to check for malware. Download the free version of this tool. First check the updates and then run a full scan.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

• Medium point charge when copy/move files

  Hello

  I'm under vSphere, ESXi, the free version, on a HP ML350 G6. The host server has 10GB of memory, processor E5620 and SATA hard disks that are directly related. I run 6 virtual machines on this particular server - very low use of resources on them.

  My problem is that when I move or copy files large (2-4 GB), the average of the load of the particular virtual machine I work at spikes in the double digits. The virtual machine is running CentOS 5.5. For the VM swap file is located on a disk separate physics than the OS. One thing I noticed, is that the hypervisor can't determine whether or not the hardware acceleration is enabled for the storage controller (Smart Array P410i). It shows as "unknown" in the vSphere client. I'm sure that this option is enabled.

  Could someone send me in the right direction on how to fix this I/O please. If you need more information, let me know.

  Thank you

  Stem

  I'm not sure the kind of hardware acceleration that André talks (VAAI) will help, even if you were to get the right storage array and vSphere license.  VAAI helps a lot for operations such as cloning VMs, creating new virtual hard disks and a few other things.  But the problem occurs when copying large amounts of files within the BONE, good guest?  If Yes, then VAAI won't make a difference.

  For what it's worth, I think that vSphere Essentials bundle is an absolutely steal to get a licensed vSphere product.  It of only $ 500 and includes licenses for up to three physical servers running ESX or ESXi, and it includes a copy of vCenter.  The copy of single vCenter is worth the price.

  It is possible that the copy of file takes up so much CPU resources that other processes are forced to wait.  How many VCPUs are assigned to the virtual machine?  Maybe try to assign another vCPU and see if that helps the issue.  Switch to another card pilot virtual NETWORK (such as the VMXNET 3 driver) can help reduce the CPU during large copies as well, but probably not a huge amount.  I'd like to see how the virtual machine works with 2 vCPUs.

  Matt

  http://www.thelowercasew.com

• Windows Explorer hangs when copying large files on external USB drive

  I'm trying to copy files over 1 GB of my pc to a WD MyBook external drive. After about 10% on the progress indicator, Windows Explorer crashes. When I cancel the work, nothing happens until I unplug the USB. Then I have the pc returns to normal.

  During my research, I discovered that a lot of people have this problem. I have tried many suggestions, but without result. The last thing I tried was a full format the C: drive with a fresh install of Vista. Copy a large file gave me the message 'Calculating time' infinite. After you have installed SP1 reappeared the problem as explained above.

  Some of the things I've tried:
  check the external hard drive: no problem found and the problem occurs on all my MesLivres 3
  safe mode
  Superfetching disabled
  update the motherboard bios

  Now my last request resource helps professionals. If I don't find a solution I'll have to go back to XP, achieve Win7 or one rating for Mac... a lot of things to think about.

  Best regards
  Rafael

  Try to copy in safe mode. If can be a slow usb port. Try anther one.

  Good luck.

  Exp. comes from http://www.computerstar.ca/

• DreamWeaver CS5 fixed missing "volume" in the local file paths for "go to..." » ?

  I can't 'Navigate chrome', no matter what I do.

  I tried:

  Re-setup of Chrome. (It's drag - drop. nothing to install )

  Searched in the preferences for a value as the Opendiff to compare the documents.

  If you select "Browse in Firefox", it works. I don't know if it's Firefox fixing it's sending the wrong way DreamWeaver, but "Volumes" are there.

  The problem probably occurs in secondary partitions on the boot disk.

  Apple has not responded to this topic, but it could be the bug from Adobe.

  Honestly, I think that the idea of "Volumes" to access other partitions (not that the default value of commissioning) has been introducint, since other applications seem to have the same problem with no obvious operations (compare Service, Apple OS files)

  Has it been fixed in CS5?

  How can I fix this in CS4? I had the pleasure to hack files if I have to. Re-install is not an option, Com' it! Replace my entire teeth for a cavity is not an answer. If Setup can fix, who designed the installer knows which file is damaged.

  Thank you.

  This thread is an extension of the discussion on this topic

  http://forums.Adobe.com/message/4184846

• Satellite Pro A110 blocking (he must press power) when copying large files

  I have two users the two ProA110 PSAB1C-GM60XE that hangs just at the copy files or randomly just by using the network connection.

  The network card is a Realtek RTL8139/810 x Family Fast Ethernet NIC

  I updated the driver to the latest version 5.708.1030.2008

  I also reset the TCP/IP Protocol:
  c:\netsh int ip reset c:\resetlog.txt

  Disable "Allow the computer to turn off this device to save power" on the properties of the NETWORK adapter

  I tried to re - install XP and the same problem.

  Shows the Windows event log. "Your computer failed to renew its address from the network (from the DHCP server) for the network card with network 0016D address 4258701." The following error occurred:

  The semaphore timeout period has expired. . "Your computer will continue to try and obtain an address on its own from the server network address (DHCP) '. Nothing came on Internet search that help.

  All who have similar problems and how it was resolved very useful.

  Thank you!

  Hmm, I searched a bit on MS pages and found this:
  em http://www.Microsoft.com/technet/support/EE/Transform.aspx?ProdName=Windows%20Operating%20Syst & ProdVer = 5.2 & EvtID = 1003 & EvtSrc = DHCP & LCID = 1033

  The reasons for this question might be:
  The DHCP server is down or does not.
  The DHCP relay does not work correctly.
  The network is down.
  The firewall on your computer blocks on broadcast network traffic.
  Network interface card or your computer driver does not work correctly.

  Microsoft offers different solutions, workaround and solution proposals.
  Please visit the mentioned MS.

  Good luck

• Photoshop CS5.1 demo Crash when opening the file

  I just downloaded last night. I went to try out it this morning, but it crashes when I try to open a file. I so can not open the software back until I get into the task manager and end photoshop processes running in the background. I'm running on Windows Vista.

  Well Yes you're crashing into your NVidia video card driver.

  Please update the driver for NVidia to (non-Microsoft) web site.

  And the process is the gel after losing because Microsoft "search for solution" has not finished, but for some unknown reason.

• Envy 15 freeze on the transfer of data USB 3.0 drive when copying many files

  Thanks in advance.

  My brand new envy 15 (model LW897AV) (15 t-3000 CTO) crashes every time that I try to transfer a lot of files from a Flash DRIVE via the USB ports on the laptop.

  It gets about 5 minutes, then simply hangs. He had done this 7 times now. I got a message on a blue screen BSOD once:

  0xE0010002

  After calling technical support HP and Google search, they think it's a problem with the USB 3.0 controller or something to do with the hibernation mode. I updated the driver for USB 3.0 controller. No joy. Also, I changed the power settings to never Hibernate. Still no solution.

  The USB ports on the left side appear to be able to let go. Next to the USB port is a wireless mouse, and he loses too much power (the Green led turns off). Sometimes the mouse keyboard and the touchpad still works. Other times, everything is frozen.

  I can recreate the problem with two different USB drives. Of course, these USB drives have no problem with either of the readers.

  Help!

  Thank you. -ChipTay

  Hi kstoltz. I have the solution for you.

  Return it. I spent more than 20 hours, sending in the dump and bsod messages files. SUPPORT TECHNIQUE IN THE U.S. WAS AWESOME.

  FAR IS A SUPPORT TECHNIQUE WAS SO PAINFUL THAT I THREW ALMOST THE ENVY 15 IN THE MARINA.

  They said it was a problem with the hardware with USB 3.0 ports and file transfers. There was no trouble, so they have defective only intel chips on motherboards out there.

  I had an Exchange with an upgrade of RAM and processor for my troubles.

  :-)

  I love HP.

• Analysis of Dreamweaver CS5 fatal error XML: an invalid document structure, line: 1, file: C:\User\Tyler\App

  Fatal XML parsing error: an invalid document structure, line: 1 file: C:\User\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configureation\Workspace\Classic.xml

  I have crossed former disscussion forums and followed the recommended steps by removing the file .xml corrupted itself (in this case 'Classic.xml') but imidiatly after when I try to open Dreamweaver once again, I am prompted with the same fatal error including the file that I just deleted. Then I deleted the entire file configures and that did not help either.

  It is also strange that when I followed the path to find the .xml file corrupted at the prompt, the path is different because I can't find the file 'Classic.xml' through 'en_US\Configuration\Weorkspace' e navigation, but I find the "Classic.xml" file corrupted in the file 'configure' file 'Adobe Dreamweaver CS5.

  Im not sure what to do now and I would really like Dreamweaver to the top and running so help please if you can!

  Thank you

  -Tyler

  Step 1: Close DW, go to C:\User\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configureation\Workspace\ and delete this file Classic.xml

  Reopen DW. DW must auto-créer your workspace layout XML file once again. See if it works very well.

  GO TO STEP 2, IF STEP 1 DOES NOT RESOLVE THE ISSUE

  Step 2: Go to the C:\Users\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en-US\Configuration and delete the entire folder "SETUP" . Reopen DW. DW should automatically create your configuration file based on pre-defined schemas and configuration options. This will definitely fix your problem.

  Reason for this question: this question would have been caused due to a malformed workspace setup. That can happen due to customizations you have made to the layout / bad permissions of files / bad closing Windows.

  See if these patches does not solve your problem and post your results here.

  See you soon,.

  ST

• Can my customer use Dreamweaver cs5 to edit a site Dreamweaver CC?

  I think currently to a subscription of the CC to Dreamweaver so that I can redesign a site, but the customer maintains and updates their content and will not be upgraded. Can they change their website using Dreamweaver CS5 once I have start to edit files in Dreamweaver CC?

  Mike,

  Dreamweaver is a glorified text editor and as such can be used to edit HTML, CSS, JS, PHP, XML and a bunch of other documents. The reason why I say this is because, regardless of the structure of a Web site, any version of Dreamweaver allows to change it. Where the difference is where it allows you to use the deprecated code or where it guides you to use contemporary code.

  In short, Yes, your customer can continue to use CS5