Problem with charger

Similar Questions

• HP G61 problem with charging the battery.

  Dear Sirs, I have read so many posts but I could not find a solution, so I decide to post one on my own.

  I have a HP G61 and work properly it works. The problem I have is with the battery.

  If I scream at the bottom of the laptop and leave it with the charger on when I start the laptop battery is full 100%

  during the initialization of the light of the current passes, the HARD drive light is normal and sometimes the charge light is on, a few times is off.

  I noticed that a lot of ppl have similar problems, so what I have is that

  With a multimeter, I have seen that the output power of the power brick is very well! Besides that I had three laptops computers HP with the same power supply, so I try this brick to the other laptop seems to work very well with the other laptop. I try another laptop PSU to this one and had the same problems.

  I concentrate so that the problem is in the battery. I download the HP battery checker and scan my bat (was100% charged) and the result was OK!

  so the mystery in this case is that the laptop does not work properly, I try full preformance, no problem at all, just the battery runs faster (make sence)

  While the laptop is running the power cord is plugged and there is no light on the side of the connector but there is light ot the power on the laptop.  As I m working with the laptop, then the charging light lights up and the battery seems to be linked to HQ and charcging.  sometimes says connected but no recharge! When I have the indicator of hip and pricing that could will a few seconds, then disappears and returns to the mode of unloading...

  If I shout down the laptop and let it connect with the brick power then the perception led can be turned off, but after a while turns on and stays on for a long time seems so at the normal charge...

  I know that sounds strange and crazy, but that's what happens...

  That this laptop works properly and I m ok with his performance (to the extent of the rest turned on) I see no reason recycling!

  the only annoying, it's that sometimes can not fresh at all so that it is turned on and of course after a while goes out...

  the battery is an original HP battery and if it is loaded to 100%, last up to an hour and something...

  hope I gave you a complete picture of what's going on with this machine.

  I tried also a few solutions that I found on the internet about the parameters of power controllers, ACPI etc. which seems to fix the problem with the power of microsoft management. This has had a small solution for a few days and then return to the former status. (I don't know if windows restores some steps on their settings)

  If there is a problem of material at the end of the day on the mobo, I would like to know it there is a chip or controller or any other component that I can replace. (I m engnr electronic so I can replace it) I had a few dead HP G61 models with screens broken, etc. or broken mobos

  Thanks in advance

  Stavros

  Hi @Polykarpos,

  You already have the troubleshooting that I would have recommended to you.  At this point, you should contact HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

• Someone at - he had problems with charger 10W EU Apple sent as replacement?

  Charger 10W EU I got from Apple did not work properly, before even the latest updates to iOS. Sometimes, the charger worked, sometimes not. I tried to replace the cable, but got by mistake a non-certified cable. With the iOS 9.3 update battery drained even with the 'false' cable connected to the power supply all the time. The accused episodically iPad and the battery discharged only, unless it is turned off. Then it loads very slowly. So I bought a new cable and charger 12W. IPad charging works now normal with iOS 9.3. I strongly suspect the 10W EU charger, but the non-certified cable may have been a problem too after the upgrade of 9.3. If the charger of apples is the problem, they should pay.

  What is your question?

• VIBE PRO - problem with charging z2

  Dear Lenovo,

  Not sure if this related to the update of LINE S230, but after having received it, my phone stopped charging properly.

  There need full 15 hours (!) is now charging at 100%...

  I tried different Chargers and different cables, no difference.

  I also did a hard reset to today. It did not help

  Any recommendations?
  Should I try to return to the Kit Kat?

  Thank you!

  Hi Monokot,

  As I said in the message, it looks like that the communication between the modem and sim card has some problems. Then please first check the sim card if the card works on other mobile phones, so I suggest you get in touch with the service center on the HW.

  Thank you.

• Dell Inspiron 17R 5720 does not work with the charger. Charger is not recognized. No problem with charger.

  My Dell Inspiron 17R 5720 does not recognize charger. And unfortunately my warranty expired 2 months ago.
  It was plugged and work in the morning, but then in the afternoon I noticed he was running on battery only. It does not start without battery (charger just plugged).

  1 this is what I did to debug. Me and my brother, we bought the same computers Dell laptops at the same time a year and a bit ago. That's why a debugging purposes, it was good.
  I took my charger and plugged into his computer. And it works. Certainly not the charger problem I guess. And when I plug the charger my computer, green light is still on the charger. And I have the original charger provided with the laptop.

  2. now, laptop is running on battery only, so that means that this motherboard works. I think so.

  3. the next thing I did was charger disconnected and removed the battery from the laptop. Then I pushed and hold the "Power" button for 45 seconds to pay a royalty to the flea market. Charger plugged in but laptop will not start.

  4. then I booted the laptop on battery, went to the BIOS and check if the charger is recognized in the BIOS. No, it does not recognize charger. So, if this isn't a charger so what else can we?

  5 laptop has no strange smells so I don't know if something happened with the motherboard, but I guess that motherboard is ok because it works battery.

  6. I was thinking of updating the BIOS, but I can't do it, because it will be not be updated then the laptop runs on the battery, it needs to be plugged.

  Now I'm stuck. I don't know what I can do. I'm willing to spend a little more money on it to try to fix.

  If someone had such a problem in the past please let me know what you have done and if it fixed it.
  Or if anyone has any other ideas, I will be happy and appreciated the help.

  Hello and sorry for this late post. Just had this problem... If there is nothing wrong with the AC adapter, it's a software problem.

  Close the laptop... Unplug the AC adapter / CC... Remove the battery... Plug the power adapter... Start the laptop... Go to the control panel... Find and select the Device Manager... Batteries, left click... Uninstall Microsoft AC Adapter, uninstall Microsoft ACPI compatible with battery control method... In fact, uninstall all you can under the batteries, but that should be all there is. It will be re - install when starting... Stop cell phone... Remove the AC adapter / CC... Replace the battery... Plug the power adapter... Start the laptop... Now, everything should be good.

• problem with charging z2

  Hello.

  I have problem when I recharge my phone takes an hour and a half to charge 50% and the phone be very warm place where the logo of sony and the back. and the charger to be too hot. Thanks and sry for bad English

  Yes, it is normal that it betrays a bit of heat during charging. However, I suggest that you try to repair the phone using PC Companion software to rule out any software problem initially.

  Before the repair of your device, you can back up your information first. See this topic for more information on how to.
  How to backup?

  If the question must remain, I think that this must be examined and fixed to a repair center. For more information on how to submit your phone for repair and where, contact your local support team.

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• charge light flashing problem with hp probook 4530 s [redacted]

  I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.

  more information:

  Windows 7 ultimate 64-bit

  BIOS version: F.25

  [number removed for privacy]

  Finally, I think it worked.

  bios for update

  Version: F.40 (March 12, 2013)

  its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.

  No problem flashing light up now.

  hope I never face again the blinking light problem. God willing.

  Here is the download link for the latest version of the bios:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116443-1

  Note: the BIOS update is sometimes risky, so be careful and follow each instruction.

• Problem with my Satellite C650D - 10 d of charge

  I have some problems with my Satellite C650D - 10 d and its battery.

  Indeed, when I want to reload my computer, it will no more, charge his battery to 99%, then it says "Blocked, not supported" and the corresponding light is off instead of orange or yellow-green.

  Then, after using my computer on battery, if I want to load, plug is not enough, I must remove my battery and replace. Charges of battery, 99%, once again.

  The problem is recurring and I don't know what to do anymore. I tried to get an empty using the BIOS battery (because Windows 7 turns off the computer when the battery is at least 5%), to see if there was a problem of calibration of the battery, but this isn't the case, and my problem is still the same.

  Hope you can help me ;)

  I recommend the update to the BIOS.

  Not sure if the solution in your case, but I read in some discussions that the BIOS update could solve battery problems.

  Otherwise if the BIOS does not help, then you should check if the new battery could be the solution.

• [Z510] Problems with the battery not charging

  I have ideapad z510 for almost a year. and now my unit still shows that it is at 0% battery. and she indicates that she battery level does not increase. and for this reason I could not use my unit when it is not plugged. What should I do about it?

  Comment to Moderator: New thread is created. The topic is edited to include the model.

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you

• I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I pressed the f1 key to continue, then my laptop recharges normally.

• Problem with Port on the DV7-3079wm of charge

  Hello world.  I searched the forum for this question and other places and I think I probably know what is the problem, but I wanted to make sure that before I go ahead with trying to fix and get some advice on my specific problem.

  I have a HP Pavilion DV7-3079wm running Windows 7 64 bit.  I have problems with the laptop to load.  I've already replaced the battery to eliminate this problem, but I need one anyway, because one was not maintain a load more.

  So the problem is when I plug my power adapter most of the time that he does not even recognize that I have it plugged.  No light load on the side or the front.  So if I slowly wiggle out or try to angle in one sense or the other, eventually he'll catch a connection and then 1 of 2 things going on.  Either she viewed the laptop too long that I do not move the charger of whatever the position in GOLD, it pops up a message saying "Smart AC output adapter is too weak for this computer." and then proceeds to the load of the laptop or it just says: "plugged in, do not load.

  I do not know if my problem is the AC adapter or if the port inside the laptop is messed up, which from what I've read on other forums requires either a new motherboard or tear down my laptop and re - solder a new fee on the motherboard port.

  I can't wait to buy a new adapter if it isn't the problem.  Also another problem, I am very happy with my laptop and really intended to max on memory and improve for one SSD but I don't want to sink money into it until I get this problem resolved.  Any help would be appreciated.

  Thank you

  No rust spots on the inside or outside of my plug adaptors CA.  I finally just went and got a new adapter and when comparing it to mine its all brilliant inside the end of the plug where mine is dull looking.  Which may mean it was just salty and was not getting a good connection.  A new Bill without problem, and immediately, although she Wiggles, if fortunately is not the port inside the laptop.  I'll try to clean my AC adapter / CC and see if it makes too much work again.  Thanks for everyone's help and info that it was appreciated and he has helped guide me in the right direction.  Also, if the port never turn off, now I know where to get a replacement.

  Up next... go to the SSD & maxing out the memory.  I can't wait!

  Thank you!!!

• I have a problem with the payment: (why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use the programs :(

  I have a problem with the payment why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use programs

  Please click Accounts & billing link here https://helpx.adobe.com/contact.html to have a conversation with our billing support team.

  Thank you

  Stéphane

• I've just updated my billing information on a new map of credit due to a problem with my old and Adobe immediately charged me for €1

  So after that I had a problem with my credit card and could not be charged, I've just updated my billing on a new credit card information.
  Just as I saved the new billing information, my banking application tells me that I am charged €1 by Adobe.
  Is - to check if the credit card details are valid?

  Because on my overview of the Adobe account, I always get the advice to update my information, also the €10,70 for my photography plan has not been charged.

  
  Any suggestions?

  I already solved it myself, my banking application displays validation bookings, that of other apps.
  If it's just a validation.